How to transport the package back
How do I transport my package back after I have already transported it to the higher level. I mean to ask that if I hv to do some modification to my package den how do I get it back from the testing department. and wt procedures I have to follow in order to get it back.
Hi
What do you mean by getting back the package to DEV
Is it request or packagae
if you define a packagae in DEV under some request, though you transport that packagae will be there in DEV
I think it is the Request Once you release and transport the request you can't get back the contenets of it back
You have to create a new request with objects and to transport again.
Regards
anji
Similar Messages
-
How to write the nodevalue back to xml file?
Hi, Everybody:
These are two packages I used. javax.xml.parsers.*,org.w3c.dom.*
Now I use "setNodeValue("abc") to set the node value to "abc". But it is not really saved back into XML file. It only change the node value in memory.
How to write the changes back to XML file? Thank you very much for your help.
Michelle* Version : 1.00
* File Purpose : Given the xml file loads into dom and recreate the file with the updated values.
* Developer : Kashif Qasim : 25/july/04
* Modify detail :
import java.lang.*;
import java.io.*;
import java.util.*;
import java.text.*;
import org.w3c.dom.*;
import org.apache.xerces.parsers.DOMParser;
import org.apache.xerces.*;
public class XMLWriter
private String displayStrings[] = new String[5000];
private int numberDisplayLines = 0;
private Document document;
//private final Node c;
public synchronized void displayDocument(String uri,Vector UpdatedValues,String getTaskID)
try {
DOMParser parser = new DOMParser();
parser.parse(uri);
document = parser.getDocument();
display(document, "",UpdatedValues);
} catch (Exception e) {
e.printStackTrace(System.err);
ReadXmlConfig objReadXmlConfig = null;
FileWriter filewriter = null;
try {
filewriter = new FileWriter(uri);
for(int loopIndex = 0; loopIndex < numberDisplayLines; loopIndex++){
filewriter.write(displayStrings[loopIndex].toCharArray());
//System.out.println("displayStrings[loopIndex].toCharArray() "+displayStrings[loopIndex].toString());
//filewriter.write("\n");
filewriter.close();
System.gc();
objReadXmlConfig = new ReadXmlConfig();
objReadXmlConfig.ITSLog("File updated for "+getTaskID+" succesfully, file is closed now ");
} catch (IOException e) {
System.err.println("Caught IOException: " + e.getMessage());
objReadXmlConfig = new ReadXmlConfig();
objReadXmlConfig.ITSErrorLog("File updated FAILED for "+getTaskID+". Reason for file error "+e.toString());
}finally {
if (filewriter != null) {
System.out.println("Closing File");
objReadXmlConfig =null;
try{
filewriter.close();
}catch(IOException e){
System.err.println("Caught IOException: " + e.getMessage());
} else {
System.out.println("File not open");
private void display(Node node, String indent, Vector UpdtRecs)
if (node == null) {
return;
int type = node.getNodeType();
NodeList nodeList = document.getElementsByTagName("QueryParm");
int TotalRecs = UpdtRecs.size();
switch (type) {
case Node.DOCUMENT_NODE: {
displayStrings[numberDisplayLines] = indent;
displayStrings[numberDisplayLines] +=
"<?xml version=\"1.0\" encoding=\""+
"UTF-8" + "\"?>";
numberDisplayLines++;
displayStrings[numberDisplayLines] += "\n";
display(((Document)node).getDocumentElement(), "",UpdtRecs);
break;
case Node.ELEMENT_NODE: {
if(node.getNodeName().equals("QueryParm")) {
for(int i =0 ; i< nodeList.getLength() ; i++)
Node nodeQry = nodeList.item(i);
NamedNodeMap nnp = nodeQry.getAttributes();
for(int j= 0 ; j < nnp.getLength() ; j++)
Attr atr = (Attr) nnp.item(j);
if(atr.getName().equalsIgnoreCase("value_"+(i+1)))
//System.out.println(atr.getName() +" : " + atr.getNodeValue() );
atr.setNodeValue(UpdtRecs.get(i).toString());
displayStrings[numberDisplayLines] = indent;
displayStrings[numberDisplayLines] += "<";
displayStrings[numberDisplayLines] += node.getNodeName();
int length = (node.getAttributes() != null) ?
node.getAttributes().getLength() : 0;
Attr attributes[] = new Attr[length];
for (int loopIndex = 0; loopIndex < length; loopIndex++) {
attributes[loopIndex] = (Attr)node.getAttributes().item(loopIndex);
for (int loopIndex = 0; loopIndex < attributes.length; loopIndex++) {
Attr attribute = attributes[loopIndex];
displayStrings[numberDisplayLines] += " ";
displayStrings[numberDisplayLines] += attribute.getNodeName();
displayStrings[numberDisplayLines] += "=\"";
displayStrings[numberDisplayLines] += attribute.getNodeValue();
displayStrings[numberDisplayLines] += "\"";
displayStrings[numberDisplayLines]+=">";
numberDisplayLines++;
NodeList childNodes = node.getChildNodes();
if (childNodes != null) {
length = childNodes.getLength();
indent += " ";
for (int loopIndex = 0; loopIndex < length; loopIndex++ ) {
display(childNodes.item(loopIndex), indent,UpdtRecs);
break;
case Node.CDATA_SECTION_NODE: {
displayStrings[numberDisplayLines] = "";
displayStrings[numberDisplayLines] += "<![CDATA[";
displayStrings[numberDisplayLines] += node.getNodeValue();
displayStrings[numberDisplayLines] += "]]>";
numberDisplayLines++;
break;
case Node.TEXT_NODE: {
displayStrings[numberDisplayLines] = "";
String newText = node.getNodeValue().trim();
if(newText.indexOf("\n") < 0 && newText.length() > 0) {
displayStrings[numberDisplayLines] += newText;
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
break;
case Node.PROCESSING_INSTRUCTION_NODE: {
displayStrings[numberDisplayLines] = "";
displayStrings[numberDisplayLines] += "<?";
displayStrings[numberDisplayLines] += node.getNodeName();
String text = node.getNodeValue();
if (text != null && text.length() > 0) {
displayStrings[numberDisplayLines] += text;
displayStrings[numberDisplayLines] += "?>";
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
break;
if (type == Node.ELEMENT_NODE) {
displayStrings[numberDisplayLines] = indent.substring(0,
indent.length() - 4);
displayStrings[numberDisplayLines] += "</";
displayStrings[numberDisplayLines] += node.getNodeName();
displayStrings[numberDisplayLines] += ">";
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
indent += " ";
public static void main(String args[])
Vector xmlValue = new Vector();
xmlValue.add(0,"Kashif");
xmlValue.add(1,"Qasim");
//displayDocument("NewMediation.xml",xmlValue);
<?xml version="1.0" encoding="UTF-8"?>
<Mediation>
<Task1>
<Source>
<SourceDriver>com.microsoft.jdbc.sqlserver.SQLServerDriver</SourceDriver>
<SourceConnection>jdbc:microsoft:sqlserver://10.2.1.58:1433;DatabaseName=MTCVB_HDS;</SourceConnection>
<SourceUser>sa</SourceUser>
<SourcePassword>sa</SourcePassword>
<Table>
<SourceTable>t_Agent</SourceTable>
<SourceQuery><![CDATA[SELECT SkillTargetID,PersonID,PeripheralID,EnterpriseName,PeripheralNumber,Deleted,TemporaryAgent,AgentStateTrace,ChangeStamp FROM t_Agent where SkillTargetID > {value_1} order by SkillTargetID]]>
</SourceQuery>
<SourceParm BusinessRule="" ColumnName="SKILLTARGETID" ColumnNumber="1" DataType="Numeric" DefaultValue="0" Format="mm/dd/yyyy xx:xx:xx XX">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERSONID" ColumnNumber="2" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERIPHERALID" ColumnNumber="3" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="ENTERPRISENAME" ColumnNumber="4" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERIPHERALNUMBER" ColumnNumber="5" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="DELETED" ColumnNumber="6" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="TEMPORARYAGENT" ColumnNumber="7" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="AGENTSTATETRACE" ColumnNumber="8" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="CHANGESTAMP" ColumnNumber="9" DataType="String" DefaultValue="" Format="">
</SourceParm>
<QueryParm FldName_1="SkillTargetID" FldType_1="Number" value_1="0">
</QueryParm>
</Table>
</Source>
</Task1>
</Mediation>
The QueryParm values are updated thru this code :)
Hope it helps u ... -
How to change the package name for a msg class
Can anybody tell me how to change the package name for a message class.
and how will it effect in the rerport?
thanks in advance
kp>>and how will it effect in the report?
You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
~Suresh -
How to transport the BW query's variable to BO webi report
Hi all
I'd like to know how to transport the BW query's variable to BO 's webi . today ,I created a sap customer varible in my bw system to get the max calmonth in the active table.The varible in the BW side run's well ,but I use this query to build a new univers ,and created a new webi report base on this univers ,but the question is the webi report can't get the varible's value I wann to know how to transport the bw varible value to BO webi report
Thanks and regards,
Peter .zhuI have changed my variaable in my bw query ,I found if you use SAP default variable it is ok in BO side . So I get a guidline by SAP default variable ,I changed my customer variable in variables edite ,don't use 'ready for input' .And then the variable can be useful in BO side .
Edited by: peter zhu on Jun 16, 2008 11:43 AM -
HT5262 How long should the icloud back up take?
How long should the iCloud back up take? I only have 4gb of storage but it has taken almost an hour already with approximately 2 hours remaining.
Hi RMaskery14,
If you are concerned about the time your iCloud backup is taking, you may find the following article helpful:
My backup is taking a long time to finish.
Backing up and restoring takes time, especially if you have a lot of data or a slow connection. Depending on the size of your backup and the speed of your network, you may need more time than expected to complete the process. Using a reliable connection when backing up your device is highly recommended.
iCloud: Troubleshooting creating an iCloud backup
http://support.apple.com/kb/ts3992
Regards,
- Brenden -
Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!
You can use some third party software to copy the music from your old iPod back to computer first, and then import the music into iTunes and re-sync them to yournew iPod. Here is a guide about how to transfer iPod music to computer. Hope it helps. Feel free to email me if you need further help.
-
Hi Everyone,
I lost my KN presentation that i spent a day with my boss to finish it. I lost it by mistakenly shutting down my Macbook pro. Can anyone please tell me how to recover the files back as i'm really2 in trouble and my job depends on it...
hmmm...how i hate myself for being such a careless person...
PLEASE HELP ME...
Thank you in advance.
Keynotes '09
Version 5.1.1 (1034)How exactly did you shut down your laptop? Not a hard restart (holding down the power button), I hope... if that's the case, then it is extremely unlikely the file is still intact on your computer. If it is, it would be an image on your RAM, and it is time-and-resource-intensive to recover it if it is even there. RAM memory is disposable and always being written over. Sorry dude...
If it wasn't a hard restart, Keynote should have made a backup, unless you 'Force Close'd it.
It really all depends on how your mac was shut down. -
How to transport the data contains in the table from development to product
How to transport the data contains in the table from development to production.
Please let me know ASAP.Hello Dilip
Create a workbench request and add the following entries to the request:
Object key: R3TR TABU <name of z-table>
For this object add the following value key:
- client-independent table: '*'
- client-dependent table (e.g. client 100): '100*'
See also: [SAP Network Blog: Transport Table Entries|/people/community.user/blog/2007/01/07/transport-table-entries]
Regards
Uwe -
How to transport the text elements in Reports?
need answer to this question.
how to transport the text elements in the reports?
Edited by: venkata kumar on Feb 18, 2008 1:33 PMHi Venkata,
Text Elements are a component/part of the SAP script and are not individual ABAP objects within the SAP environment hence they cannot be transported independently.
You would need to make changes in your text elements in the SAP script which would result in the SAP script being saved under a transport and moving the transport across the landscape would result in the text elements also getting transported.
In short: Move SAP script - to move text elements.
Cheers,
Aditya -
I just installed ios7 on my iPhone 4s. It seems to be working fine but all of the apps I had previously installed are gone. They show up in my app store as purchased, but the shortcuts are gone. Does anyone know how to get the shortcuts back? Thanks!
I updated via my iPhone 4s. The apps were on my iPhone 4s. That's all the information that I have. The update to ios7 seems to have gone smoothly - everything else is working, phone texting, email, internet, etc. But all of the apps I had installed over the past year are no longer showing up as shortcuts. No facebook, no twitter, no espn, etc. They are all still listed in my app store as purchased, but the shortcuts and my folders are gone. Thanks.
-
Hi ,
How to create the package.
ThanksHi Mahaboob,
Goto SE80 Transaction
Select Package and below give the package name and click on enter.
then u get a pop up asking to create package. Click yes. then u get a pop up Package Builder: Create package
Give the description and the Application component and click on create.
Best regards,
raam -
I loaded my ipad photos from camera and all the pictures sorted by date. I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files other than reloading all of them from camera?
What version of iPhoto?
Select one and rotate it. Then rotate it back. Does that make it appear?
A much better work flow is the keep the photos after importing. Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
LN -
How To transport the Routines with UR
i HAVE THE ur WHICH I SELECTED from Object types in Transport connection now how to transport the routines
please tell what to select
soniyaHi Soniya,
If you have collected the UR, the routines would also get collected. You can verify this in the RSA1? Transport connection screen, or if you have assigned to a request, open up the request and see if you can see R3TR ROUT entries.
Hope this helps... -
How to transport the text elements
hi guru's,
i need answer to this question.
how to transport the text elements in the sap script?Hi,
U mean Standard Text?
Standard Text can create using SO10.
Use RSTXTRAN Standard Program..
Do Like this..
Goto se38 and enter program name as RSTXTRAN
and press F8..
and give Text-key Name as Standard Text Name
then Press F8..
And select Select check box.. and enter
and press on trsfr to corr button..
it asks transfee textxs to a correction..
press on yes button..
it will show request number or create your own request...
and after goto SE10 tcode and Transport it...
Regards,
KK -
How to transport the Holiday Calendar.
HI Experts,
How to transport the Holiday Calendar.
Actually the "Transport" option in menu bar is showing but it is disabled.
Please advise.
Regards,
TomeshHi Tomesh,
Once you created the holiday calender, you have to click on the transport icon which can be displayed at the left top of the scree "SCAL" transaction.
Once you click on the transport icon with " truck symbol " then only all the holidays and holiday calender will be moved to the target system.
Try this and let me know the feedback.
Hope it will sort out your issue.
Regards,
Azish
Maybe you are looking for
-
What to do with 6310 all in one printer when done with it?
Want to sell, donate, or recycle (in that order) my HP 6310 All-in-one printer. The door no longer shuts and an eror message frequently appears saying "carraige jam". We simply push "OK" and it works. Instead of trying to fix it -- we bought a ne
-
Word Mail Merge does not accurately import a Text field in Excel with more than 15 numbers
Hi, I've looked through some of the discussions regarding importing numbers from excel into word mail merge. I'm having a problem. In Excel I have a column that includes numbers with more than 15 digits. In Excel, I have made this column a text forma
-
I have QT Pro and Flip4Mac. I would like to save a short :30 second QT movie as a WMV file so my wife can play it on a work PC. WMV files are the only thing her computer can play. Anyways, when I Export to WMV everything seems to work except that the
-
How do I cancell pay monthly application
I have an application which has a monthly fee. How do I cancell it
-
Photoshop elements 12 displays burry images when placing on slideshow for 8.1 windows computer
Why does my photoshop elements 12 display my pictures blurry when placing them on slideshow for 8.1 windows laptop