HOW TO Trigger customized smartform from standard trasaction
Hi,
I have created new customized driver pgm and smartform for order ready notice,i want to triger the smartform from standard transaction vt02n.What's the procedure,pls let me know.
hi,
after configuring nace as specified by others, u'll have to select dat output type in ur invoice.
goto->header>output type->
den select dat output type.
Similar Messages
-
How to close custom form from standard form.
Hi,
I have the following requirement which I can not handle.
I open custom form from menu special position which is available in standard form on particular window and block only. So custom form may be open only when the window of standard from is open.
My requirement is to close custom form when the window of standard form is closing or when standard form is closing. I can not modifiy stanard form so I need to use forms personalization. I have problem in form personalization:
1) to handle "when-form-exit" event / trigger (when window closing I can handle by when "new item instance" where cursor goes and appropriate conditions).
2) to navigate to my custom form to close it, like "go_form" in Forms Builder.
Is it possible do achieve with forms personalization or maybe in some other way?
Kind regards,
MarcinHi,
The standard program is list of vendors address(AQZZ/SAPQUERY/FKF1============)or we can also access through the :sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Regards,
naresh -
How to call our smartform in standard report
Hi friends,
How to call Zee smartform from standard report without affecting stadard flow.
Thanks,
YogeshHi,
do it this way.
in the ALV function call
give in
exporting
I_CALLBACK_USER_COMMAND = 'user_command '
write a subroutine
FORM user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
slis_selfield.
case whatcomm.
when 'print'.
call 2 function modules here
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING FORMNAME = P_FORM "Your form name
variant = ' '
direct_call = ' '
IMPORTING FM_NAME = FM_NAME
EXCEPTIONS NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
EXIT.
ENDIF.
calling the generated function module
CALL FUNCTION FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = CPARAM
OUTPUT_OPTIONS = OUTOP
USER_SETTINGS = SPACE
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
IMPORTING
JOB_OUTPUT_INFO = TAB_OTF_DATA
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endcase.
endform.
This is an example in the function gereated call give you own importing and exporting parameters.
Regards
Kiran Sure -
How to get attribute value from standard page ?
Hi,
How to get attribute value from standard page ?
String str = (String)vo.getCurrentRow().getAttrbute("RunId");
But this value is returning a null value ....
Can anyone help me to get this attribute value which is actually having a actual value .getCurrentRow() would always return null if no setCurrentRow() is used.
Please check the page design and understand how many rows of VO are there. You can also use the following to get the row:
vo.reset();
vo.next();
Regards
Sumit -
How to Trigger an IDOC from SAP R/3 to two systems at a time
Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas -
How to Trigger an IDOC from SAP R/3 to two XI systems
Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you .. -
HOW TO TRIGGER AN WORKFLOW FROM A PROGRAM ?
HELLO THERE ,
CAN ANYBODY PLZ TELL ME HOW TO TRIGGER AN WORKFLOW FROM AN PROGRAM AND TO PAS THE VALUE TO THE CONTAINER ?Hello Neon,
If you want to trigger the workflow directly, use the FM, SWU_START_WORKFLOW
CALL FUNCTION 'SWU_START_WORKFLOW'
EXPORTING
task =
* LANGUAGE = SY-LANGU
user =
* SENDER_ID =
* IMPORTING
* RETURN_CODE =
* WORKITEM_ID =
tables
* CONTAINER =
* MESSAGE_LINES =
attachment_list =
A workflow can also be triggered by and event which is in turn triggered by a program.
By the FM, SWE_CREATE_EVENT
Example:
w_key = 'Connie'.
w_creator-otype = 'US'.
w_creator-objid = 'SAPDEV02'.
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
objtype = 'YH_BUDDIES'
objkey = w_key
event = 'event'
creator = w_creator
* TAKE_WORKITEM_REQUESTER = ' '
* START_WITH_DELAY = ' '
* START_RECFB_SYNCHRON = ' '
* NO_COMMIT_FOR_QUEUE = ' '
* DEBUG_FLAG = ' '
* NO_LOGGING = ' '
* IDENT =
* IMPORTING
* EVENT_ID =
* TABLES
* EVENT_CONTAINER =
EXCEPTIONS
objtype_not_found = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
WRITE: / 'EVENT TRIGGERED'.
ENDIF.
COMMIT WORK.
Hope it helps you.
Regards
Indu. -
How to trigger an interface from a database(COBOL) in online mode?
Hi everybody,
Can you please tell me how to trigger an interface from a database(COBOL) in online mode?
thanks a lot,
Ramya ShenoyIf you can make a HTTP call from you DB platform -
HTTP -> BPM (Receive -> Send Step (execute an SP or your select statement here in the JDBC receiver channel) -> send (to target) )-> end.
VJ -
In PM or QM modules how to link the smartforms to standard transections.
Hi ABAP gurus,
i am facing the problem how to link the smartforms to Standard transections, like
QGA3 in this T-code i am give the Inspection lot no only, then this Lot number go to the smartforms
it will pick the total data relavent to lot no, my problem is how to link between the T-Code to smartforms,
thanks.
raj.hi,
you have to configure in NACE. first identify the application type in NACE.
thanks,
anupama. -
How to trigger IDOC'S from SAP
Hi All,
How to trigger IDOC's from SAP(ECC 6)..where can we check this in mii 11.5 weather it is fail/success
Thanks,
AbhiYou can trigger LOIPRO, LOIPLO and a few others manually from POIT (SAP Txn). Master Data related to orders can be triggered from POIM. Depending on which IDocs you which to generate, there are other transactions to trigger different IDocs.
You can also use Triggers from MII to generate IDocs in SAP using CLOI_DOWNLOAD_TRIGGER_MDAT (POIM equivalent) and CLOI_DOWNLOAD_TRIGGER_TRANS (POIT equivalent).
There is also a rather nice post which detailed the process of using change pointers to automate the IDoc generation and download, but I am having trouble finding it. Will continue to look and will post link when I find it.
Regards,
Mike
I couldn't find the post I was looking for, but there is an informative note 390635 which may help.
Edited by: Michael Appleby on May 5, 2009 1:29 PM -
How to trigger sender rfc from r3 system
Hi experts,
can any body send documents about " how to trigger sender rfc from r3 system"
regards
sandeep.HI Sandeep,
To send RFC data on timely basis you can schedule the programs.
In Partner Profile use setting collect program. Use program RSEOUT00 to send data at particular time.
You can schedule the report RSEOUT00 according to your requirements. So it flushes all the idocs in the background as per your schedule this program.
Plese refer the below thread, it will help you.
Re: Triggering Idocs from sender side
Idoc triggering from a transaction
Cheers..
Vasu
<i>** Reward Points if found useful **</i> -
APD process is active, How to trigger the data from BI to CRM table
Hi All,
I want to send data from BI system(using APD method) to CRM table (ADS method).
I am able to see the table for e.g ABCD in CRM system , i can open using SE11 , but data is 0.
In BI , i have data in DSO and i have mapped it in APD process to data Target to CRM system and APD is active.
Now i want to know how to trigger the data from BI to CRM table? (e.g ABCD).
Please let me know the steps.
Regards.
Nithi.Hi
Just create a Process Chain to execute this APD method, if the process Chain is already available, then just insert this Process in to the process Chain and execute the Process Chain by normal process, by hoe we do in general.
Hope it solves... -
How to use parameter passed from standard page in VO query of custom page
Hi everyone,
I have a custom page which needs to be called from a standard page. Now this custom page is based on some parameters passed from standard page.
How do I catch those parameters i my custom page .
And how to use those parameters in the VO query of my custom page.
Edited by: Bunny on Nov 11, 2010 9:16 AMHi,
Bunny wrote:
I have a custom page which needs to be called from a standard page. Now this custom page is based on some parameters passed from standard page.
How do I catch those parameters i my custom page .---If standard page the button style is :Button,Then u can set Destination URL in personalization.
Destination UR:"OA.jsp?page=/xxx/oracle/apps/po/msg/webui/CustomUpdatePG&Flag=" +Value ---Like u can pass params
---IF the button style is :Submitbutton ,Then u need to customization of the co.
---In co processFormReq call a cutom page like below.
pageContext.setForwardURL("OA.jsp?page=/xxx/oracle/apps/po/msg/webui/customUpdatePG&Flag=" +Value, null, (byte)0, null, null, true, "N", (byte)0);
---In custom page co in processRequest u can get these value :String value=pageContext.getParameter("Flag");
And how to use those parameters in the VO query of my custom page.---Get the vo and set where clause
String where="valueAttr="+value;
vo.setWhereClauseParams(null);
vo.setWhereClause(where);
vo.executeQuery();
Regards
Meher Irk
Edited by: Meher Irk on Nov 11, 2010 11:53 PM -
How to map customer field to standard field using BAPI_PO_CREATE1 ?
Hi,
i am trying to transfer a customer field from SRM to ECC60 through BAPI_PO_CREATE1;
In SRM the EAN field does not exist; Thus we have created it.
While transfering the PO to ECC, we try tu use BBP_PO_INBOUND_BADI to map the SRM field to the EAN11 field in EKPO.
However, we do not find the EAN11 field in the BAPIPOITEM structure.
Steps already done :
BBP_CUFMAP
How do we map a customer field coming from an external system to an ECC standard field ?
Kind regards,
Yanninterface name is: SalesOrderCreateRequestConfirmation_In
have a look at this link to get some more details:
http://help.sap.com/esoa_erp2005/helpdata/en/44/62e384e370311de10000000a155369/frameset.htm
is that what you need? -
Passing data to custom smartform from a custom program...
Hello Gurus,
Since, the function module gets generated dynamically at runtime when smartform is activated, I know that first I should use "SSF_FUNCTION_MODULE_NAME" and pass custom smartform name to it to get the name of function module. Then I have to use call function '/XXXXXXXXX'.
Now, I am writing a custom code and I want the data from my select program in custom program to be passed to smartform ? How can I pass the data from my custom program to smartform ? Do I pass it before using function module "SSF_FUNCTION_MODULE_NAME" ? If yes, how ?
Regards,
Rajesh.hi,
u have to declare ur structures in form interface and can retrive the data from custom program.
check this sample code.
declare structure in interface.
WA_MKPF TYPE MKPF.
write ur custom code lik this.
DATA: wahz TYPE zmemigo_form_header,
wa_mkpf TYPE mkpf.
DATA: t_itemz LIKE zmemigo_form_item OCCURS 0,
t_mseg TYPE mseg OCCURS 0,
waitemz TYPE zmemigo_form_item,
waitem TYPE mseg.
DATA : form_name TYPE tdsfname VALUE 'ZPS_STN'.
DATA : fnc_module TYPE rs38l_fnam.
SELECT SINGLE mblnr INTO wa_mkpf-mblnr FROM mseg
CLIENT SPECIFIED WHERE mandt EQ sy-mandt
AND mblnr EQ p_mblnr
AND mjahr EQ p_mjahr
AND bwart EQ '351'
AND shkzg EQ 'H'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = form_name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = fnc_module
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION fnc_module
EXPORTING
wa_headz = wahz
wa_mkpf = wa_mkpf
TABLES
it_itemz = t_itemz
it_mseg = t_mseg
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Maybe you are looking for
-
Wifi WEP password not working on Windows side, works fine on Mac side
I have not been able to get connected to my wireless connection with windows xp however I have no problem on the mac side. The problem is that my password is 12 characters (not 13). This WEP password works fine on the mac side and also works fine on
-
Converting from Adobe Photoshop Album
I am considering jumping to the MAC platform for my home computers. I think I have all the wireless device and application issues resolved, but one hurdle remains... I have over 5000 photos edited, annotated, and organized in Adobe Photoshop Album. I
-
MB doesn't see external display
I have attached an external VGA display to my MB running 10.5.6. I have purchased the Apple miniport to VGA adaptor for this purpose. The MB System Preferences/Display doesn't see it at all. I have tried two different displays, both of which work wit
-
when I select print preview it only works for the first print job. when I select a second print job the preview screen never loads the images and when I try to delete the print job it never does. I have to shut down the computer and the printer to cl
-
Photoshop elements 12 stopped working after swapping mainboard
Hi everybody! On a Win 7 Pro PC the PSE 12 Photo Editor stopped working after swapping the defective mainboard. I tried uninstall and reinstall as admin, with disabled security software. We always get the welcome screen from where you launch organize