How to turn off suggested sites when using - Inbox
I don't want the suggested sites. Displaying them causes problems when rand children use computer.
You can turn off search suggestions & auto complete through Firefox & the search engine settings etc. depending specifically on what you are wanting to achieve.
See:
[[Search suggestions]]
Similar Messages
-
How absolutely turn off computer if I use lilo boot loader?
How absolutely turn off computer if I use lilo boot loader?
With this /etc/lilo.conf content computer not absolutely turn off:
# /etc/lilo.conf
boot=/dev/hda
# This line often fixes L40 errors on bootup
# disk=/dev/hda bios=0x80
default=arch
timeout=0
lba32
prompt
image=/boot/vmlinuz26 append="apm=power-off"
label=arch
root=/dev/hda1
initrd=/boot/initrd26.img
read-onlyPlease provide some system specs so that we may give better advice. As phrakture has already said, you must have hardware that supports power management before auto shutdown works.
-
How to turn off red LED when have a new voice mail?
How to turn off red LED when have a new voice mail?
My SPA303 VOIP Phone
ThanksYou must disable message waiting indication (MWI) on your platform.
Regards. -
How to totally turn off data traffic when using ma...
Nokia N8-00:
I only use the integrated gps and have turned off the assisted gps, net based gps and Wi-Fi/Network but when accessing maps it still generates data traffic.
Normally this is´nt a problem but when traveling abroad data traffic costs a small fortune.
In my old N95 when I downloaded offline maps and turned everything but integrated gps off there was no data traffic at all but even after the latest maps updates (i.e. yesterday) it appears that the maps still needs downloading when accessed...
Any suggestions how to completely avoid data traffic when using maps?Set all destinations to always ask and select no whenever the phone gives you a request, set Maps to offline, and set location to just use intergrated GPS. By the way, just been to Portugal using Vodafone and data charges only about £5 for week, and they've just improved allowances, may be worth checking your service providers web site and see if it's necessary to bother about data roaming, they all tend to follow each other, and Data roaming charges in europe seem to be coming down !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
How to turn off Apple TV and use my direct tv
We have direct tv and Apple TV. I do not know how to turn off the Apple TV to watch direct tv and the movies my granddaughters are watching are in Spanish and I have no idea who to get them in English can anyone help?
Your Apple TV is connected to a different input on your TV, use your HDTV's remote to switch to the input in which direct tv is connected.
As for the movies, are these from iTunes? -
How do you turn off Flash audio when using captivate Nav bar?
Hi Guys and Girls
I have an imported flash file that plays an audio track,
I have no problem turning the audio off, when the user uses
the button within the flash file to go to the next slide in the
captivate movie...
on(release){
stopAllSounds();
_root.rdcmndNextSlide = 1;
BUT if the user decides to use the navigation bar within the
captivate movie it all goes pair shape.. The flash audio continues
to play into the next slide. Anyone have a know how to solve this
problem?
How do you tell flash to stop playing the audio when using
the captivate navigation bar?
(The flash file is a flip book and the audio NEEDS to stay
within the flash file)
Cheers
Aquil0Thank you! Thank you! Thank you! This totally solved my issue. I had a Captivate 4 movie using an embeded animation that had audio. It would play the audio again when the next slide appeared. I have to use Captivate 4, because my audience still uses Flash 7 (yikes). However, if you have Captivate 5 and are having this problem there is a widget that solves this issue: http://blogs.adobe.com/captivate/2010/11/animations-%E2%80%93-audio-sync-issue.html#commen t-3872
Thanks!
EliteEraser -
Turn off laptop screen when using hdmi
I have my Macbook connected to a tv using HDMI. How do I disable the laptop screen when in this mode?
turn the brightness to zero turns off laptop screen doesnt affect the TV
-
Models that turn off integrated antenna when using antenna jack.
I am looking for a cell phone that has an external antenna jack AND will turn off the integrated antenna when the external jack is inserted. Lets define the term " integrated" as being an internal antenna or the permanent attached external or nub style. This can be on the market now or on the used market. The Treo line, even the old ones, is my primary interest but only because i have tried them and I could check email. Any HP/Palm model cell phone would be fine even if it is only available on the used ebay market. Knowing what models DO and DO NOT have an external jack and knowing what ones WILL and WILL NOT turn off the antenna next to my head will help me narrow down my options. So knowing a model will not do as I want is just as valuable. Thanks for the help. Pete I try to buy local. With cell phones that is hard for obvious reasons. HP has many workers in my hometown so i will support them first. If you can think of a non-HP or PALM company that offers this option please let me know and I will add it to the backup list.
Post relates to: Palm PilotSet all destinations to always ask and select no whenever the phone gives you a request, set Maps to offline, and set location to just use intergrated GPS. By the way, just been to Portugal using Vodafone and data charges only about £5 for week, and they've just improved allowances, may be worth checking your service providers web site and see if it's necessary to bother about data roaming, they all tend to follow each other, and Data roaming charges in europe seem to be coming down !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
How to turn off number sounds when dialing out?
? I have the keyboard sound off already, but, when I dial out the numbers are not silent.
The keyboard is just that, ...the keyboard, ....used only for text, email and web. The phone dialing screen is totally different and is uneffected by any changes you make to the keyboard settings. The only way to silence the phone when dialing out is to either turn the volume all the way down (not logical) or to engage the mute slide on the side of the phone. **Warning, ...both options also turn the ringer off or down. I would like to see apple address this in the next update. Users don't need to hear these loud numbers.
-
How to turn off i-pad when circle coniues inmiddle/
How do I turn off my i-pad 2 when the circle coninues in the middle of the screen?
Have you tried a reset and then tried shutting down after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
Apple TV3 turns off and on when using remote, already reset and restarted.
Apple TV just started acting up yesterday. When using remote, light on Apple TV would turn off and on so it would somewhat work when the light was on and would not when light when off. When light is off and in a menu selection, cursor would just move to the end of the list and stop. Already restored back to factory and reset it. Difficult to program after reset when remote only works part of the time when the light goes on so stuck in out of the box condition. Any help on this? Thanks!
Hello stiktani,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV remote issues:
Apple TV (2nd and 3rd generation): Resolve issues with Apple Remote
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Turn off LCD display when using second monitor WITHOUT closing lid
I am wondering if there is a way to turn off my macbook's LCD monitor when using a secondary display without closing the lid. I end up having to close the lid, wait for it to sleep, moving moues, and then reopening the lid so it doesnt overheat, and that's alot of work when most windows machines just offer a display setting to accomplish the same thing.
Does anyone know of a terminal command that would disable the primary monitor?Ilya Batikov wrote:
I am wondering if there is a way to turn off my macbook's LCD monitor when using a secondary display without closing the lid. I end up having to close the lid, wait for it to sleep, moving moues, and then reopening the lid so it doesnt overheat,
It is designed to work with the lid closed and it will not overheat. I do it all the time and have not noticed a rise in temperature because the lid is closed. -
How to turn off Wi-Fi when I leave home?
I like to have Wi-Fi on when I'm home.
However, when I'm not at home, I'd like to have it off, to save battery - and back on when I return.
Is there a way to do this using Siri (disappointingly - I'm pretty sure not) or to do it using location-based services - similar to location-based reminders ("Remind me to feed the cat when I get home")?
I'd rather not have to manually edit Settings->Wi-Fi all the time.
Thanks.as far as i know there isnt way to turn off the wifi..however u can go to tools-settings-connection-wireless LAN -show availability -never
this way it saves the battery of your phone and keeps u away from unwanted connection
try out!!! -
As default, SPA122 and SPA112 have DHCP Options 66, 160, 159 and 150 turned on.
Our pre-provisioning process includes adding our default profile rule to our provisioning server for the device to pull its configuration files once the device has been added to an account.
However, it seems like some customers have had problems with the device downloading the definite configuration file and manually turning off option Option 66 in the provisioning tab in the device solves this issue.
Is there any option we could add to our pre-provisioning file so that it removes 66 from the "DHCP Option to Use" field in the provisioning tab?
Please advise...Thanks Dan,
I didn't know the dhcp server could serve different options to different classes of clients, I'll have to look that up!
Moises
so if your provisioning file has this line below (this is from a spa5xx config I had in my temp folder, so use the line from your provisioning file, or use the SPC tool to create a new default config for that device type)
<DH<DHCP_Option_To_Use group="Provisioning/Configuration_Profile">66,160,159,150,60,43,125</DHCP_Option_To_Use>
change it to
<DH<DHCP_Option_To_Use group="Provisioning/Configuration_Profile">160,159,150,60,43,125</DHCP_Option_To_Use>
Hope it helps,
Provisioning guide is here
Cisco IP Telephony Devices Provisioning Guide - Cisco Support Community
Dan -
How to turn off image info when hovering mouse over image?
I think I must have selected something by accident because now everytime I hover my mouse over an image, I get all this info about that image. I know it can be info will be good to know but I don't want to see it all the time. I can't find anything in the settings that seems like it would be able turn it off.
suggestions?ress the T key on your keyboard
Maybe you are looking for
-
Keyfigure values are incorrect in BEx Query based on infoset
Hi Experts, I have created a infoset using 3 DSO's . 1 main DSO( from which i rquire all the data) is linked with other 2 DSO's using left outer join. DSO is linked with other 2 DSO's with a field return GUID . Now when i am executing a query , key f
-
The Utilisation of Firefox causes Windows Vista Language Bar to disappear.
Every time I open Firefox, Windows Vista Language Bar will be missing. Once I close Firefox, Language Bar reappear. It causes trouble whenever I wanna write in different languages.
-
Adobe Acrobat 9 Pro too large for a bundle?
The vApp comes out to about 1.1gb and I was able to upload it to our Zenworks servers, but it fails to download to devices. Could this just be too large of a bundle? I just see a bunch of this in the logs: [ERROR] [10/07/2010 09:53:54.136] [1592] [Ze
-
I was able to run the disc previously, a message came on to upgrade, I did and haven't been able to run since. I've installed Firefox 3.6b but can't get disc to operate. Message I now receive says to install 3.+, but not how. Have not tried their web
-
Need help on event based report scheduling on webi 3.2
Hi All, I need to add/remove trigger events on scheduled report instances. I have around 100 scheduled report instances and want to add a event trigger. I do not want to reschedule all the instances one by one with new event trigger. Is there any way