How to undo the automatically start program to when a user logs on

I have followed this following directions (http://technet.microsoft.com/en-us/library/cc736643%28v=ws.10%29.aspx#BKMK_TSC) :
"Using Terminal Services Configuration
Open Terminal Services Configuration.
In the console tree, click Connections.
In the details pane, right-click the connection for which you want to specify an initial program, and then click
Properties.
On the Environment tab, under Initial program, select
Start the following program when the user logs on. This option allows you to configure an initial program for the connection.
If you select Do not allow an initial program to be launched. Always show desktop, then Terminal Services cannot start a specified initial program automatically when a client connects to a terminal server. Instead, the user must start programs
by using the default desktop that is displayed during the Terminal Services session.
If you select Run initial program specified by user profile and Remote Desktop Connection or Terminal Services client, then the program that is specified in the default user profile and in Remote Desktop Connection or the Terminal Services
client will run when the client connects to the terminal server.
If you selected Start the following program when the user logs on, in
Program path and file name, type the path and file name of the program that you want to start when the user logs on to the terminal server.
In Start in, type the working directory path for the program, and then click
OK."
the problem is that now all of the server users get the specific program automatically starts when logged on and i cant undo it because i cant get to the desktop or to the "tscc.msc"
is there a way to fix it?

Hi,
Thanks for posting in Windows Server Forum.
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous steps should be helpful for many similar scenarios. If the issue still persists, please feel free to reply
this post directly so we will be notified to follow it up.
BTW, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks for your Support & understanding.
Regards.
Dharmesh Solanki
TechNet Community Support

Similar Messages

How do you make a program run when any user logs in?

I have an application which will need to run when any users logs in.
Such that Joe downloads and installs the application, logs out, then Sally logs in and the application runs for Sally.
Does anyone know how to do this?

Hey Steve, thanks for that link. It seems to be what
I am looking for. What is the meaning of the
~/Library vs /Library ? They are definitely
different folders.
Yes, they are definitely different folders. The "~" character represents the current users home folder, so "~/Library" represents the Library folder that's located inside a users home folder. Anything placed in there will only affect the one user whose home folder you've accessed.
The "/Library" folder is the Library folder that exists at to root of the boot volume. Things placed in this Library folder will affect all users of the system. Basically it's sort of a "global" Library.
Also, from a script, how do I add an item to execute
for that kind of PList?
That could be tricky based on the structure of that particular plist file. I haven't really looked at it closely but one place you could start is to read the "man" page for the "defaults" command... enter "man defaults" in Terminal. The "defaults" command allows you to read/write plist files, but defaults is not very good at accessing deeply nested plist items.
Related to that, how do I tell if the logging item
for my App is already there? I do not want to keep
adding to the list if it is there. If someone
deletes my app and then reinstalls it, I do not want
it to run twice, three times, etc..
Again, you could possibly read the plist using the defaults command and determine whether your item was already present or not.
Do you know of the one in the ~/Library path, what
user it execute as? Since it is all users, it
probably is root or something like that.
No, the one in ~/Library is in each individual user home folder. It will execute with the current user's privileges. This is where Login Items normally go when you go through the GUI... "Sys.Prefs -> Accounts -> Login Items" and add a login item for one user.
Even items placed in /Library, which should execute for all users, will execute with the current user's privileges.
In the near
future we might need root privileges, so I might need
a program to startup for all users as root instead of
the user.
Is your app, that needs to run at login time, a GUI application or is it a faceless shell script (or something similar). Your original post gave me the impression that you needed to launch a GUI application. However, if it's a shell script then you probably want to look at doing a LoginHook instead of using the Login Items procedure at the web page I posted earlier. I believe a LoginHook will also give you the ability to run the script as root.
Check out this link at the ADC website.
or
Take a look at this information and this utility at Mike Bombich's website.
Steve

How to restrict the job start conditions (only "Immediate" type) ?

Hi,
We allow our users to schedule and execute in background mode transactions (example IP19, IW38). We gave them for that authorizations (object S_BTCH_JOB with LIST, PROT, RELE and SHOW - objetct S_PROGRAM with BTCSUBMIT).
We would like that users can schedule and execute their jobs only with the u201CImmediateu201D job start condition (in the Start Time screen for the type of start condition : Immediate, Date/Time, After job, After event, or At operation mode).
Another solution: prohibit the scheduling and the execution background job in a certain time interval ...
How can restrict the job start conditions ?
Thank you.
Patrice.

Hi Jan,
Yes, sa38 makes it possible indeed to execute in background into immediate mode a job but
the user have to know the name of the program to be carried out ...
The user knows only the name of these transactions trade. For example, IW38.
In the menu of this transaction, SAP gives the possibility to execute in background :
Program --> Execute in Background --> display of Start Time screen for the type of start condition :
Immediate, Date/Time, After job, After event, or At operation mode).
It is at this time there that we want that the user can only choose the "immediate" mode.
We must thus prohibit the other choices (Date/Time, After job, After event, or At operation mode) ... and
and we don't know how to restrict these other options in this screen "Start Time screen for the type of start condition".
Thank you.
By.

How to customize the Java Concurrent Program(PO Output for Communication)

Hi,
How to customize the Java Concurrent Program(PO Output for Communication)
I need to add the Line level Ship To Address ,Line Notes and Extended Price fields on Java Concurrent Program.
Please any body help/guide me in this regard.

Hi,
Changing Java Conc. program for "PO Output for Communication" is difficult.
Actually, if you observe closely, "PO Output for Communication" program uses PO<HEADER/LINES..>_XML views.
So if you could change these views and add your requireed columns to it, you can automatically see your changes in XML data file.
See if the following link will you to get there.. http://chandramatta.blogspot.com/
thanks,
Matt

Can you automatically start programs when you switch on your imac

can you automatically start programs when you switch on your imac

Yes, go to: Apple / System Preferences / User Groups / Login Items and add the Application to the list of things automatically set to start at login.
However, you should limit it to those that you need or use, because adding a lot will needlessly slow down your startup time and use more RAM.
Message was edited by: den.thed
Oop' late on the draw again, glad your question is answered.

Scheduling the Automatic Payment program

Can we schedule the automatic payment program? If so, how?
The requirement here is that without/limited manual intervention the program should be able to run.

Hi,
For sure business cant avoid running proposal because they have to make sure that vendors who needs to be paid were not gone into exceptions for various reasons. You can definatley automate the process once proposal is succesfully executed. I am hoping this request is coming from business because they dont want to stay till 8pm for check run. if the checks are printed onsite there is no point in automating it, if the check printing is done off site by some vendor this is how you can automate the process.
you create variants for check printing program RFFOUS_C. For the program run date you have to create variant varibale so that it will be updated on daily basis. Proposal Id has to be unique for each company code. Ask business to run proposal with the same Id which you specify in the variant. I am not going in detail about further selections.
Create a batch job and schedule to run on the day and time you wanted. once the job is succesfully executed a spool will be generated and the checks can be printed.
I hope it helps,
Thanks,

How to get the date starting from 1 to the current date from the system dat

Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,

concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
    call function 'HR_JP_MONTH_BEGIN_END_DATE'
         exporting
              iv_date             = sy-datum
         importing
              ev_month_begin_date = gv_begda
              ev_month_end_date   = gv_endda.
Regards,
Ravi
Message was edited by:
        Ravi Kanth Talagana

How to undo the "Paste into" in Indesign?

Does anyone know how to undo the "Paste into" in Indesign? I have used the "paste into" to mask a list of items but now i want to redo it so that I can see the whole list of items again. Is it possible?
thanks!

Same way you undo anything else, Edit > Undo, or are you asking if you can come back days later and remove the content, then put it elsewhere? Sounds like maybe the latter, and my guess is you pasted a text frame into another frame, so you need to select the outer frame, then Object > Select > Content, or just use the Direct Select tool to select the content, then cut and finally paste it someplace else.

How to find the Contract Start date

Hi Friends,
with the help of the Transaction type, Item Category,reference Interest rate, how to find the Contract Start date/Billing Strat date and the Contract number.
Regards,
Raju.

Hi
naj you can find the contract start date and billing date in crmd_order Financial details data tab, start of contract and Billing and the contract no u will find after Approval of Eligibility Norms, then save go to actions create certificate of acceptance the you will get contract number
Reward with Points
Venkat

How to degub the module pool program

Hi friends,
could anyone tell me "How to degub the module pool program"...!!
Thanks in advance..!!

Hi
Debugging of module pool is same as reports, use /h or put breakpoint
but u shud know what u want to check
there are generally two event used in module pool
PBO
This event is used before displaying the screen,It is used to clear fields table, show table control, tabstrip and most important conditionally modify the scrren .
PAI
is used to validate the fields which are entered on the screen with database values and then fetch records from table.
i mean all values to make available in internal table
now u would be sure which part u want to debug.
Rewards if helpful..............

How to find the existing START ROUTINEs in Transfer Rules in whole system ?

Hi all,
   How to find the existing Start Routines in Transfer Rules in BW System, please ?
   I know that we could find from the Transfer Rules.
   Is there any way to find instead of looking at Transfer Rules for <b>each</b> InfoSource?
Thanks,
Venkat.

Hi Venkat
You can find it in these tables
RSTRAN
RSUPDROUT
RSAROUT
RSAABAP
RSAABAPINV
Thanks
Tripple k

How to run the automatic RA run

hi
how to run the automatic RA run SO.
sowmya
Moderator: Please, avoid asking basic questions. On further violations your user will be banned

You can schedule the job for Result analysis of SO. Transaction code is KKAK - Collective Processing. please check it. it may help you.

How to delete the Unwanted Z-programs

Hi all,
How to delete the unwanted Z-program from $TMP development class.
Thanks,
Govindarajan Umadevi.

Hi,
YOu can go transaction SE80, Choose package $TMP.
And click Display.
Here you will find all your Z programs. Just right click and delete them.
If you are using Latest versions(I think from SAP 4.7D), you can even select all by pressing mouse key and right click and can able to delete multiple items at single time.
BUt becareful, it contains other develper objects also as it is a common place.
Thanks,
Ramakrishna
Message was edited by: Ramakrishna Prasad Ramisetti

TS1702 Hi I bought Final Cut Pro X to my old macbook but the week later I bought a new bacbook pro and wonder how to download the final cut program to my new mac.I find the item in iTunes, but not in apple store.I find Final c in fins, but iTunes can't d

Hi I bought Final Cut Pro X to my old macbook but the week later I bought a new bacbook pro and wonder how to download the final cut program to my new mac.I find the item in iTunes, but not in apple store.I find Final c in fins, but iTunes can't download

Use the Mac App Store application and go to the purchased tab, which you'll find at the top of the Mac App Store window.

How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns.

How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns. Help please.

If you look closely at the top of the canvas pane, as you move either of the boxes (green or red) there is an indication of pixel positions... "top, bottom, left, right," and "scale."
Admittedly, it doesn't seem as if you can "enter" the dimensions with your keyboard, however, as you move the boxes, you have a real time indication of the boxs' locations.
(I couldn't take a screen shot, as you have to actively move the box with a mouse or other input device... thus, I could not also take a screen shot with same device.)
I hope this helps.

How to undo the automatically start program to when a user logs on

Similar Messages

Maybe you are looking for