How to upload data for me01 using lsmw recording method

*dear expert please tell me the complete procedure for how to upload data in me01 transaction using lsmw recording method.
Moderator Message: Duplicate post locked.
Edited by: Vinod Kumar on May 8, 2011 7:56 PM

Hi,
To be honest I don't understand your question. When You execute LSMW and create project, then all steps are shown in a very clear way with good description. With which one you have problems?
Best regards
Marcin Cholewczuk

Similar Messages

  • How to upload data for me01 using LSMW BDC METHOD

    *hi export please tell me the complete procedure for uploading data in me01 using LSMW BDC METHOD*
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on May 8, 2011 10:06 PM

    Hi,
    To be honest I don't understand your question. When You execute LSMW and create project, then all steps are shown in a very clear way with good description. With which one you have problems?
    Best regards
    Marcin Cholewczuk

  • How to upload data into IT0000 using ABAP-HR program

    Hello,
    I'm required to upload data into multiple infotypes [IT000, 0001, 0002, etc] using single input text file. Can anyone able to guide me, how to upload data into IT0000 using ABAP program ?
    Thanks in advance.
    Regards
    Prabhakar.
    Message was edited by:
            Prabhakara Muthyal

    Example code for HR_MAINTAIN_MASTERDATA to COPY IT0002
    DATA: INT_0002_FINAL TYPE STANDARD TABLE OF PA0002 WITH HEADER LINE.
    DATA: VALUES        LIKE PPROP OCCURS 10 WITH HEADER LINE,
    RETURN        LIKE BAPIRETURN1,.
    LOOP AT INT_0002_FINAL.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-PERNR'.
          VALUES-FVAL  = INT_0002_FINAL-PERNR.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-BEGDA'.
          VALUES-FVAL  = INT_0002_FINAL-BEGDA.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-ENDDA'.
          VALUES-FVAL  = INT_0002_FINAL-ENDDA.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-nachn'.
          VALUES-FVAL  = INT_0002_FINAL-NACHN.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-gblnd'.
          VALUES-FVAL  = INT_0002_FINAL-GBLND.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-vorna'.
          VALUES-FVAL  = INT_0002_FINAL-VORNA.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-rufnm'.
          VALUES-FVAL  = INT_0002_FINAL-RUFNM.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-name2'.
          VALUES-FVAL  = INT_0002_FINAL-NAME2.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-inits'.
          VALUES-FVAL  = INT_0002_FINAL-INITS.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-famst'.
          VALUES-FVAL  = INT_0002_FINAL-FAMST.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-gbdat'.
          VALUES-FVAL  = INT_0002_FINAL-GBDAT.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-sprsl'.
          VALUES-FVAL  = INT_0002_FINAL-SPRSL.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-anzkd'.
          VALUES-FVAL  = INT_0002_FINAL-ANZKD.
          APPEND VALUES.
          VALUES-INFTY = '0002'.
          VALUES-FNAME = 'P0002-natio'.
          VALUES-FVAL  = INT_0002_FINAL-NATIO.
          APPEND VALUES.
    * maintain master data
          CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
            EXPORTING
              PERNR           = INT_0002_FINAL-PERNR
              ACTIO           = 'COP'
              BEGDA           = INT_0002_FINAL-BEGDA
    *         ENDDA           = INT_0002_FINAL-ENDDA
              SUBTY           = SPACE
              NO_ENQUEUE      = SPACE
              DIALOG_MODE        = '0'
              TCLAS              = 'A'
            IMPORTING
              RETURN1         = RETURN
            TABLES
              PROPOSED_VALUES = VALUES
    *         MODIFIED_KEYS   =
            EXCEPTIONS
              OTHERS          = 1.
          IF RETURN IS INITIAL.
            WRITE:/' Done....'.
          ELSE.
            WRITE:/   RETURN-ID, RETURN-TYPE, RETURN-NUMBER, RETURN-MESSAGE_V1, RETURN-MESSAGE_V2, RETURN-MESSAGE_V3, RETURN-MESSAGE_V4.
          ENDIF.
          CLEAR VALUES.
          REFRESH VALUES.
        ENDLOOP.

  • How to upload data for custom infotype

    Hi  Friends
    Can we use HR_INFOTYPE_OPERATIONS   FM  for custom infotype too  or is there other way or other Standard FM to upload data for custom infotype  starting with 9000..etc.
    Points will be there for sure.
    Thanks
    Meeta & Roopa

    Thanks for quick response.
    my qns is can we use Standard FM like HR_INFOTYPE_OPERATIONS  for custom infotype too ?
    in my requirment  input will come from portal form and in background  Java Wd is going to use these FM  but i have this big  doubt can we use these standard FM for  uploading data in custom infotype as well or else is there any other way.. but for sure we can't use BDC and LSMW in this requirement .
    Thanks Meeta & Roopa

  • Best practice to upload data for Appraisals: BDC, LSMW or functional module

    Hi,
    I have heard that BDC and LSMW do not work for data upload in appraisals. Is it true?
    Can we use ECATT or SECATT to upload data in appraisals?
    I somewhere got the information that functional modules
    HRHAP_DOCUMENT_PREPARE
    HRHAP_DOC_UPDATE_BODY_AND_SAVE
    HRHAP_DOCUMENT_CREATE
    are used to upload the data for appraisals?
    Many of my earlier clients found it very hectic to create appraisal templates every year (PHAP_CREATE). They needed something automated for this.  I managed to suggest them manual upload or SECATT, but I am not sure if BDC/LSMW work for this.
    Can somebody throw some light on this?
    Best regards,
    Veera Sasidhar Jangam

    Hi,
    You need to write a code for same and use function modules available as those does direct updates to database.
    If client is not bothered about look and feel during dataload or do not care about display infotypes during data updates then use above method otherwise BDC needs to be written with screen control programming in it.
    Thanks,
    Ameet

  • How to upload data into CRM using batch job

    Hello,
    I got some problem and need some hints.
    I am uploading data from a flat text file (product data) into CRM using thefunction module GUI_UPLOAD. My program starts with a selection screen whereI enter the path and the filename of the program, then I click start, and
    the data is transferred in CRM. This works perfect, and I can automaticallycreate service products in CRM.
    Here comes the PROB:
    But now I want to automize this procedure using a batch job that automatically picks up the file from the server and processes it automatically without any user interaction. BUT I always get an error saying that my function module GUI_UPLOAD can't run in batch mode. So
    anyone has an idea how to do this? Any other function modules that can run in batch mode? Any other ideas?
    Thx very much for ur help on this.

    Hi Bill,
    GUI_UPLOAD, like the name says, uses the SAPGUI to upload the data to theserver.. and in a batch job, you don't have the connection to a SAPGUI.
    So you should use following kind of coding:
    DATA MSG(100).
    OPEN DATASET "FILENAM" FOR INPUT IN TEXT MODE ENCODING DEFAULT MESSAGE
    MSG.
    IF sy-subrc = 0.
    DO.
    READ DATASET "FILENAM" INTO [Your internal table].
    IF sy-subrc <> 0.
    EXIT.
    ENDIF.
    APPEND [Your internal table]P_DATA.
    ENDDO.
    ENDIF.
    The file should then be available on the server.
    Regards

  • Can any body tell me how to upload data for infotype 2011

    hi gurus,
    please tell me hw to create the bdc for infotype 2011.

    Go to SHDB and record the Tcode PA30 with Infotype 2011.
    ~BiSu

  • How to handle table control in lsmw recording method

    hi expert please tell me the procedure for how to handle table control in lsmw recording method
    Locked for same reason as how to upload data for me01 using LSMW BDC METHOD
    Edited by: Matt on May 9, 2011 8:52 AM

    Sri,
    just search in SDN search box by giving table control in lsmw you will get hell lot of threads for same.
    Amit.

  • BDC Program for Uploading Data for Property Tree in cg02

    Hi,
        How to upload data for property tree ( standard Properties ) of CG02. I checked for BAPI or Function Module but most them supports for specification header and sub item. 
    Please Let me know if any function module or BAPI available for this process.  I tried with BDC Program, but it fails.
    Regards,
    Rajesh Kumar Murugesan

    Hallo Rajesh
    take a look here:
    http://help.sap.com/erp2005_ehp_06/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
    Chapter "Import and Export".
    1.)  Reads cross these further chapters:
    "Tools (EHS-BD-TLS)" => "IMport and Export" => "Import: Process" => "Specifying the Sequence of the External Data Structure "  => "External File Structure: Specification"
    Here you will learn how to prepare the data. In chapter:" Example: Transfer File for Specifications" you will find an example of an file whcih could be used to upload data in the property tree
    2.) Chapter:" Importing Specifications"  is explaining the steps whcih are need to populate the property with data using the file as prepared; read cross chapter "Specification Import Control"
    I hope this helps.
    C.B.
    Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM
    Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM

  • Uploading data through scat using without files

    if we are uploading data for J1IS using BDC, Values are not getting updated.
    so we are trying to upoad it using SCAT.
    what are the steps to f

    Hello Member,
    This thread is locked since it does not adhere to rules of engagement. Please go through rules of engagement before you post any threads in here.
    Thanks and Kind Regards
    Mohan
    eCATT forum Moderator

  • Wrong views Selected when using LSMW + Recording

    Hi,
    I use LSMW + Recording method to extend warehouse management view, and it works fine in the DEV system, but when the LSME projrct was imported into QA system, the system selected wrong views at the begining when running this LSMW object, the WM 1 and WM 2 view should be selected, but in QA system, instead, only Accounting view is selected, what's the reason? Kindly please advise.
    Thanks.

    The reason is the dynamic on the view selection.
    Depending on the already maintained other views (like sales and purchasing and storage location) the position of WM 1+2 changes.
    Instead of recording MM01 you should record MMZ1 as this has a static place for WM views.
    But even better is to use report RLMG0020.

  • How to upload data into Classification-MM02 for each MATNR By using BAPI

    Hi all
          How to upload data into characterstic value in  classification- MM02 for each MATNR by using BAPI.

    Hi Siva,
    Please try BAPI BAPI_OBJCL_CHANGE.
    The object key should be material number and object table should be MARA.
    Regards
    Hiren K.Chitalia

  • Customized LSMW (Batch Input Recording) to upload data for Vendor

    Hello Fiends,
       can u help me on this object and how to upload in xk01.
            Customized LSMW (Batch Input Recording) to upload data for Vendor Master using Transaction code XK01
    With best wishes,
    Chandu.
    Point will be rewarded....

    Hi,
    Go through the following link, you will find your answer
    http://www.sapbrain.com
    Regards,
    Bhaskar

  • How to upload data from excel to SAP and options to be used

    How to upload data from excel to SAP and options to be used
    thank you,
    Regards,
    Jagrut Bharatkumar shukla

    Hi Jagrut,
        You can use gui_upload.
    chk the sample program mentioned below.
    REPORT ZFTP .
    DATA: BEGIN OF I_FILE OCCURS 0,
    DATA(2000) TYPE C,
    END OF I_FILE.
    DATA: BEGIN OF I_FILE2 OCCURS 0,
    DATA(2000) TYPE C,
    END OF I_FILE2.
    DATA: W_COUNT TYPE I.
    PARAMETERS: P_FILEN TYPE STRING,
    P_FILE2 TYPE STRING,
    P_NUM(4) TYPE N..
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
    PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
    PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
    START-OF-SELECTION.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = P_FILEN
    FILETYPE = 'ASC'
    HAS_FIELD_SEPARATOR = 'X'
    HEADER_LENGTH = 0
    READ_BY_LINE = 'X'
    DAT_MODE = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    CHECK_BOM = ' '
    VIRUS_SCAN_PROFILE =
    NO_AUTH_CHECK = ' '
    IMPORTING
    FILELENGTH =
    HEADER =
    tables
    data_tab = I_FILE
    IF SY-SUBRC <> 0.
    MESSAGE E024(Z1).
    ENDIF.
    LOOP AT I_FILE.
    W_COUNT = W_COUNT + 1.
    IF NOT W_COUNT > P_NUM.
    MOVE I_FILE TO I_FILE2.
    APPEND I_FILE2.
    ENDIF.
    ENDLOOP.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE =
    filename = P_FILE2
    FILETYPE = 'ASC'
    APPEND = ' '
    WRITE_FIELD_SEPARATOR = 'X'
    HEADER = '00'
    TRUNC_TRAILING_BLANKS = ' '
    WRITE_LF = 'X'
    COL_SELECT = ' '
    COL_SELECT_MASK = ' '
    DAT_MODE = ' '
    CONFIRM_OVERWRITE = ' '
    NO_AUTH_CHECK = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    WRITE_BOM = ' '
    TRUNC_TRAILING_BLANKS_EOL = 'X'
    WK1_N_FORMAT = ' '
    WK1_N_SIZE = ' '
    WK1_T_FORMAT = ' '
    WK1_T_SIZE = ' '
    IMPORTING
    FILELENGTH =
    tables
    data_tab = I_FILE2
    FIELDNAMES =
    *& Form F_FILE_GET
    text
    -->P_P_FILEN text
    -->P_TEXT_G01 text
    FORM F_FILE_GET USING L_FILENA L_TEXT.
    CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
    DEF_FILENAME = ' '
    DEF_PATH = ' '
    MASK = ',.,*.TXT.'
    MODE = 'O'
    TITLE = L_TEXT
    IMPORTING
    FILENAME = L_FILENA
    rc =
    EXCEPTIONS
    INV_WINSYS = 1
    NO_BATCH = 2
    SELECTION_CANCEL = 3
    SELECTION_ERROR = 4
    OTHERS = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Reward if helpful.
    Regards,
    Harini.S

  • Problem with uploading data from excel using BDC for tcode f-02

    Hi All,
    I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
    With regards,
    Rosaline.

    Hi,
      in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
    suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
    Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
    LOOP at ITAB to WA.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'BDC_CURSOR'.
    bdcdata_wa-fval = 'RM08M-EBELN'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'INVFO-BLDAT'.
    bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'INVFO-BLDAT'.
    bdcdata_wa-fval = wa-X2." pass the same value to repeated field
    APPEND bdcdata_wa TO bdcdata_tab.
    Endloop.
    Hope you can understand.
    Regards,
    Dhina..

Maybe you are looking for