Wrong views Selected when using LSMW + Recording

Hi,
I use LSMW + Recording method to extend warehouse management view, and it works fine in the DEV system, but when the LSME projrct was imported into QA system, the system selected wrong views at the begining when running this LSMW object, the WM 1 and WM 2 view should be selected, but in QA system, instead, only Accounting view is selected, what's the reason? Kindly please advise.
Thanks.

The reason is the dynamic on the view selection.
Depending on the already maintained other views (like sales and purchasing and storage location) the position of WM 1+2 changes.
Instead of recording MM01 you should record MMZ1 as this has a static place for WM views.
But even better is to use report RLMG0020.

Similar Messages

  • Help:  Error when using LSMW (Recording Object Type)

    Dear all,
       I encountered an error when using "Batch Input Recording" way in LSMW,which is as follows:
    I have recorded the transaction MM01 and the source structure and data mapping.When dealing
    with "Specify Files",the error comes out with message
    --> "File Name 'Converted Data':Max.45 Characters:Remaining saved". 
    and the subsequent steps cannot be maintained due to the error.

    Alex,
    The name of file for Converted data is a system generated combination of your Project subproject and object followed by lsmw.conv  as   Project_Subproject_Object.lsmw.conv
    System has set a limit of a maximum of 45 characters. It the file name exceeds 45 characters, the system will throw the error.
    Just rename the file such that it is with in the 45 charcter limit....you will be fine
    Hope this helps
    Vinodh Balakrishnan

  • JMF, Linux, wrong codec selected when using jarred version of app

    I have problem realising an AVI player when I try and run Linux JMF application when whole application is bundled into jar file and I try and run it using
      java -cp <..JMF/lib/jmf.jar:/home/codroe/fobs4jmf.jar..> -jar app.jarIn jmf.log I see:
    ## Player created: com.sun.media.content.unknown.Handler@1cd2e5f
    ##   using DataSource: com.sun.media.protocol.file.DataSource@911f71
    ## Building Track: 0
    ## Input: XVID, 720x576, FrameRate=25.0, Length=1244160 68 extra bytes
    !! Failed to handle track 0
    XX   Unable to handle format: XVID, 720x576, FrameRate=25.0, Length=1244160 68 extra bytesThis is exactly the message I usually get when some part of JMF cannot find "jmf.properties" file (if for example could not find .jmfdir), but looking at strace from application run it does appear JMF found my jmf.properties this time, but still chose not to use omnvidea codec:
    stat64("jmf.properties", 0xfeffc410)    = -1 ENOENT (No such file or directory)
    stat64("/home/codroe/JMF-2.1.1e/lib/jmf.properties", {st_mode=S_IFREG|0644, st_size=31354, ...}) = 0
    open("/home/codroe/JMF-2.1.1e/lib/jmf.properties", O_RDONLY|O_LARGEFILE) = 11When I run my unbundled (i.e. not wrapped up in jar) version of Linux application (same classpath), it finds jmf.properties no problem, and choses omnivoidea codec and now is able to play the video with good things in jmf log:
    ## Player created: com.sun.media.content.unknown.Handler@30c221
    ##   using DataSource: com.omnividea.media.protocol.file.DataSource@a401c2
    ## Building Track: 0
    ## Input: FFMPEG_VIDEO, 720x576, FrameRate=25.0, Length=414720 0 extra bytesMy windows version works fine in both configurations, jarred or not jarred.
    From Linux strace log I it shows my working non-JARed version has selected omnividea codec:
    gettimeofday({1100876842, 175149}, NULL) = 0
    stat64("/home/codroe/media/protocol/file/DataSource.class", 0xfeffc384) = -1 ENOENT (No such file or directory)
    stat64("/home/codroe/JMF-2.1.1e/lib/media/protocol/file/DataSource.class", 0xfeffc384) = -1 ENOENT (No such file or directory)
    gettimeofday({1100876842, 179815}, NULL) = 0
    stat64("/home/codroe/media/protocol/file/DataSource.class", 0xfeffc384) = -1 ENOENT (No such file or directory)
    stat64("/home/codroe/JMF-2.1.1e/lib/media/protocol/file/DataSource.class", 0xfeffc384) = -1 ENOENT (No such file or directory)
    gettimeofday({1100876842, 182979}, NULL) = 0
    gettimeofday({1100876842, 183206}, NULL) = 0
    gettimeofday({1100876842, 184371}, NULL) = 0
    gettimeofday({1100876842, 184591}, NULL) = 0
    stat64("/home/codroe/com/omnividea/media/protocol/file/DataSource.class", 0xfeffc384) = -1 ENOENT (No such file or directory)
    stat64("/home/codroe/JMF-2.1.1e/lib/com/omnividea/media/protocol/file/DataSource.class", 0xfeffc384) = -1 ENOENT (No such file or directory)
    gettimeofday({1100876842, 191005}, NULL) = 0but as I don't see this in trace from JAR version, and because in JMF log it says:
    ## Player created: com.sun.media.content.unknown.Handler@30c221
    ##   using DataSource: com.omnividea.media.protocol.file.DataSource@a401c2I believe it has not selected correct codec for a reason I don't understand.
    [I checked I only have one version of jmf.properties on system].
    Any ideas why jarred version is different from non-jarred version?
    version information:
    # JMF Version 2.1.1e
    ## Platform: Linux, i386, 2.6.5-1.358
    ## Java VM: Sun Microsystems Inc., 1.5.0
    and using fobs4jmf from http://fobs.sourceforge.net

    correction, for the last bit I should have said, for non-working jarred version in JMF log I see:
    ## Player created: com.sun.media.content.unknown.Handler@1cd2e5f
    ##   using DataSource: com.sun.media.protocol.file.DataSource@911f71indicating wrong codec selected

  • How to upload data for me01 using lsmw recording method

    *dear expert please tell me the complete procedure for how to upload data in me01 transaction using lsmw recording method.
    Moderator Message: Duplicate post locked.
    Edited by: Vinod Kumar on May 8, 2011 7:56 PM

    Hi,
    To be honest I don't understand your question. When You execute LSMW and create project, then all steps are shown in a very clear way with good description. With which one you have problems?
    Best regards
    Marcin Cholewczuk

  • Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

    Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?  I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
    Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
    This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

    Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

  • Have not been able to see comments at bottom of espn website page. Have zoomed in aand set view to default with no luck. I can view comments when using IE or Chrome.

    Have not been able to see comments at bottom of espn website page. Have zoomed in and set view to default with no luck. I can view comments when using IE or Chrome.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

  • "Wrong" material number when using manufacturer part number

    Hello gurus,
    when I create a new material, first the system gives me a new material number according to the given number range of the material type, let's say 100000002. So far, so good.
    But when I enter a manufacturer part number (e.g. 123456789) and press enter, the material number changes to 00000000000000000000000000000000100000002. And when I save the material master, the number is 123456789, allthough that number is not even allowed concerning the number range.
    What's wrong here? Is this a bug or a feature? In my view the manufacturer part number should never overwrite our own material number!
    Thanks
    Alicia

    What Material type you are Using for Creating Manufacturer Parts?? Its HERS and the Number Range for HERS Material type is Internal.
    If you Want to Maintain externally then you have to Define new external no range and assign to HERS.
    When you Select HERS you can see the Basic Text and Purchasing Views alone. In that You have to enter Desc of Mfg part and Input Original Material no.
    Here is the Process for Manufacturer Part Profile :
    Create External No ranges for Vendor Account Group MNFR and save.
    Now Create Each Make / Manufacturer like ABB as one Vendor in XK01 Trxn code.
    Create Material Code original say XXXX in MM01 with ROH material type. (for eg Transistor which is available with ABB & Seimens make)
    Create material code for ABB make say 11with Material type HERS which contain only two views (Basic Data & Purchasing) and give Make, Original material No & Material group and other details and save.
    Create material code for Seimens make say 12with Material type HERS which contain only two views (Basic Data & Purchasing) and give Make, Original material No & Material group and other details and save.
    Create a Purchase order with original Material XXXX, then it will ask for mnfg part profile then select the material and click F4 on it it will show you the created mfg part nos like ABB 11 & seimes 12 and select one and save.
    Prerequisite is you have to Activate Mfg part profile in OMPN trxn code
    And in Material master Purchasing View Select the mfg part profile and save
    Even if you set the Mfg part number in Display mode in SPRO settings system will throw the same error.
    Now What can be done is :
    Either go to ME21N and Select material tab after inputting and press f4 and select Manufacturer part number options then system will showe the list of mfg part number maintained to that material select the desired and save.
    Else go to MM02 Purchasing View and in Mfg part Profile tab there must be a four charecter profile assigned to field Remove this and save.
    The Second option is not a good practice.

  • Wrong metadata retrieved when using Oracle8.1.7 + classes12.zip

    Hi,
    I am using Oracle8.1.7+classes12.zip+jdk1.2.2.
    I am always retrieving the wrong metadata for the tables. The same piece of code works fine when using Oracle8.1.5+classes111b.zip+jdk1.2.2.
    The code is as follows :
    try {
    db = Database.getDatabase();
    con = db.getConnection();
    ps = con.prepareStatement("SELECT * FROM " + tablename);
    meta = (ps.executeQuery()).getMetaData();
    } catch(SQLException e) {
    Debug.log("ServerMetaCache::requestMeta " + e);
    System.err.println("ServerMetaCache::requestMeta " + e);
    return null;
    The following is a list of the column name retrived from the metadata :
    TABLE_CAT
    TABLE_SCHEM
    TABLE_NAME
    COLUMN_NAME
    KEY_SEQ
    pk_name
    Anyone encountered this before?
    null

    The code I posted above was incomplete.
    The complete code is as shown below:
    db = Database.getDatabase();
    con = db.getConnection();
    ps = con.prepareStatement("SELECT * FROM " + tablename);
    meta = (ps.executeQuery()).getMetaData();
    try {
    int count = meta.getColumnCount();
    columns = new ColumnDefinition[count];
    System.out.println("tname = " + tname);
    System.out.println("column count = " + count);
    for (int i = 0; i < count; i++) { // arrays starts from 0 while columns start from 1
    String colName = meta.getColumnName(i+1); // get the database name for this column
    System.out.println("colName = " + colName);
    catch(SQLException e) {
    System.err.println(e.toString());
    The result is :
    tname = Product
    column count = 6
    colName = TABLE_CAT
    colName = TABLE_SCHEM
    colName = TABLE_NAME
    colName = COLUMN_NAME
    colName = KEY_SEQ
    colName = PK_NAME
    null

  • Trim mode 'wrong frame' problems when using merged clips

    Hello there,
    We are having a problem with the trim mode on FCP 6.0.4. We're working with 1080psf 24 Apple ProRes 422 material, captured using a AJA Kona card.
    The sound and picture were recorded separately, and synced manually (by creating merged clips) in FCP.
    When we go into the trim window, it shows a different frame as the incoming or outgoing frame on some clips. In other words it's not actually showing us the real frame before or after the cut. Instead it shows a frame that's half a second back, for example. When we preview the cut, it cuts in the 'right' place, but when we pause and try to fine cut the transition using +1 keys (or trim back/forward keys), it shows us the wrong frame. When we preview it again, the cut is still in the 'right' place - not the frame represented when it's stilled. This makes using trim mode nigh-on impossible since it's not actually showing you the frames you're cutting.
    Are there any patches or workarounds to fix this issue? I can't find any fixes on forums/help sites or the FCP manual.
    Tried trashing prefs, repairing disk permissions and all the usual maintenance stuff!
    Exporting new Quicktimes of the merged clips and then re-importing them is not an option, as they need to be timecode accurate to be recaptured for the online and vfx work.
    Any advice would be much appreciated - if no solutions exist we'll have to switch everything over to Avid, and that'd be a mammoth job.
    Many thanks in advance!

    You may not be zoomed in enough in the Timeline window, the more you zoom in, the more detailed edit you can perform. Zoom out too much, and you won't have the sensitivity.

  • Custom View Missing when using NSToolBar

    Hi all
    I have a window with a custom view on it ( PreferencePanelWindowController.h .m .xib ). And I have two views ( PreferenceGeneral.h .m .xib and PreferenceLogging.h .m .xib ) which can be loaded into the custom view.
    Now the General view loads when the window is opened however if I add an NSToolBar to the window then the General view won't load when opening the window.
    This is the case both when I create the NSToolBar programmatically or if I simply use interface builder to pop the Toolbar on.
    Why would this be and how would I get round this.
    Incidentially I have tried reloading the view in awakefronib and windowdidload.
    Cheers
    Steve

    Adding on from the above
    I have
    - (void)awakeFromNib
        [self buildToolBar];
        [self changePreferencesViewController : kPreferencesGeneralTag];
    - (void) buildToolBar
        _toolbarItemList = [[NSMutableArray alloc]init];
        _toolbarItems = [[NSMutableDictionary alloc] init];
        // Create Tool Bar Buttons
        [self createToobarButton : _general          : @"General"        : @"General"        : @"NSPreferencesGeneral"       : @""];
        [self createToobarButton : _registration     : @"Logging"   : @"Logging"   : @"NSPreferencesLogging"       : @""];
        _toolbar = [[NSToolbar alloc] initWithIdentifier:@"preferencePanes"];
        [_toolbar setDelegate:self];
        [_toolbar setAllowsUserCustomization:NO];
        [_toolbar setAutosavesConfiguration:NO];
           [self.window setToolbar:_toolbar];
    Ok if in awakefromnib I remove [self buildToolBar]; then the view loads but obviously there is now no toolbar.
    Futher more you can leave that in and remove [self.window setToolbar:_toolbar]; in the buildToolBar method which obviously stops the toolbar drawing but the view loads.
    So why would drawing the toolbar stop the custom view loading even though the view method is run after the toolbar method.
    Thanks
    Steve

  • No light off on when use camera recording in n8

    i have nokia n8
    why there is no option when use record video no on/off light...its must have ??
    if any program do to can use it

    Hi youcef84,
    As these forums are a user to user support forum I would like to advise you to contact the Nokia Care Line if you wish to communicate with Nokia Support directly. You can reach them by phone, mail or chat (where available) through the 'Contact us' section on this page.
    Please refer to the forum guidelines which are part of the conditions everyone agrees to abide by when you sign up for these forums;
    This is mainly a peer-to-peer support forum, and Nokia does not provide direct customer support to all questions via these boards. If you wish to get personal assistance from Nokia customer support by phone or email, please visit the "Contact Us" section of your local Nokia website.
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • Qosmio x300 - no dual view option when using analogue

    Have plugged in an analogue monitor. I can get an image to appear on either the analogue monitor or the laptops LCD but I can't get it to appear on both, i.e. dual view - either extended desktop or clone.
    I have a Qosmio (a regret since buying it due to all the problems it has and Toshiba customer service have!). Its an x300-13w and I am running win vista x64.
    I have the latest drivers from Toshiba website and looking to various forums I have tried to find a reg key called DisableDualView but cannot find such a key (the key probably only exists in win xp).
    After removing the analogue monitor my laptop is now playing up further in that every time it logs in it does so under a lower resolution then flicks back to the correct high resolution.
    Have tried turning sli off in case that was the cause of the problem but that was no help.
    The problem appears to be that neither the nvidia control panel nor windows display settings shows the option for multiple monitors, both display only a single monitor option.
    In the windows display settings I can only see "generic php monitor on nvidia geforce 9800...." and when I plug in the analogue monitor it says "multiple monitors on nvidia geforce...." however the monitor icon only shows one monitor.
    In the nvidia control panel I only see the option "only use one display (single)".
    Any suggestions on what I might try?
    I seem to have some memory of having to change something in BIOS to switch between using HDMI and VGA but can't remember where I might have seen this.

    frther update:
    have been playing around with the settings... i can only get dual view to appear as an option and to work if i use the 9400m integrated graphics in windows power saver scheme.
    when i turn off SLi (by turning the power scheme to power saver) i note the following:
    1) dual view works
    2) Windows shows only the LCD and CRT on the 9400m graphics (which i understand is the integrated graphics)
    3) Nvidia control panel also shows that the 9400M is in use
    does the 9800m gts not support dual view?
    when i turn on SLi i note:
    1) dual view does not work
    2) windows device manager shows 4 monitors. 2 on the 9400m and 2 on the 9800m gts.
    3) nvidia shows only the LCD on the 9800m gts. there is no sign of the crt.
    so my problem is now narrowed down to:
    i can't use dual view when the computer is in performance or balanced mode (power scheme options).
    has anyone successfully used the dual view option on the 9800m gts when in performance and\or SLi mode? any tips on how i can too ;)
    considerign the advantage of SLi i would have expected the 9400 to complain and the 9800 to be running just fine.

  • Bug report & possible patch: Wrong memory allocation when using BerkeleyDB in concurrent processes

    When using the BerkeleyDB shared environment in parallel processes, the processes get "out of memory" error, even when there is plenty of free memory available. This results in possible database corruption.
    Typical use case when this bug manifests is when BerkeleyDB is used by rpm, which is installing an rpm package into custom location, or calls another rpm instance during the installation process.
    The bug seems to originate in the env/env_region.c file: (version of the file from BDB 4.7.25, although the culprit code is the same in newer versions too):
    330     /*
    331      * Allocate room for REGION structures plus overhead.
    332      *
    333      * XXX
    334      * Overhead is so high because encryption passwds, replication vote
    335      * arrays and the thread control block table are all stored in the
    336      * base environment region.  This is a bug, at the least replication
    337      * should have its own region.
    338      *
    339      * Allocate space for thread info blocks.  Max is only advisory,
    340      * so we allocate 25% more.
    341      */
    342     memset(&tregion, 0, sizeof(tregion));
    343     nregions = __memp_max_regions(env) + 10;
    344     size = nregions * sizeof(REGION);
    345     size += dbenv->passwd_len;
    346     size += (dbenv->thr_max + dbenv->thr_max / 4) *
    347         __env_alloc_size(sizeof(DB_THREAD_INFO));
    348     size += env->thr_nbucket * __env_alloc_size(sizeof(DB_HASHTAB));
    349     size += 16 * 1024;
    350     tregion.size = size;
    Usage from the rpm's perspective:
    The line 346 calculates how much memory we need for structures DB_THREAD_INFO. We allocate structure DB_THREAD_INFO for every process calling db4 library. We don't deallocate these structures but when number of processes is greater than dbenv->thr_max then we try to reuse some structure for process that is already dead (or doesn't use db4 no longer). But we have DB_THREAD_INFOs in hash buckets and we can reuse DB_THREAD_INFO only if it is in the same hash bucket as new DB_TREAD_INFO. So line 346 should contain:
    346     size += env->thr_nbucket * (dbenv->thr_max + dbenv->thr_max / 4) *
    347         __env_alloc_size(sizeof(DB_THREAD_INFO));
    Why we don't encounter this problem earlier? There are some magic reserves as you can see on line 349 and some other additional space is created by alligning to blocks. But if we have two processes running at the same time and these processes end up in the same hash bucket and we repeat this proces many times to fill all hash buckets with two DB_THREAD_INFOs then we have 2 * env->thr_nbucket(37) = 74 DB_THREAD_INFOs, which is much more than dbenv->thr_max(8) + dbenv->thr_max(8) / 4 = 10 and plus allocation from dbc_put, we are out of memory.
    And how we will create two processes that end up in the same hash bucket. We can start one process (rpm -i) and then in scriptlet we start many processes (rpm -q ...) in loop and one of them will be in the same hash bucket as the first process (rpm -i).
    I would like to know your opinion on this issue, and if the proposed fix would be acceptable.
    Thanks in advance for answers.

    The attached patch for db-4.7 makes two changes:
      it allows enough for each bucket to have the configured number of threads, and
      it initializes env->thr_nbuckets, which previously had not been initialized.
    Please let us know how it works for you.
    Regards,
    Charles

  • Multiple weight font selection when using STL file importing...

    I am aware how powerful the manual editor is for DSP4.2, but unfortunately a lot of the editing for my subtitles needs to be done outside of DSP. So I came across a little bit of a problem...
    When using a multiple weight font, like Kozuka Mincho Pro (and many others), there are several weights, and some don't even have a "Bold." As an example Light, Thin, Roman, Heavy, Black, etc.
    So, using the STL method of importing, how does one specify a font AND weight that does not correspond to a "Bold" version? i.e., setting "Helvetica Neue Bold" does not bring that weight up when specifying "Bold = False," and you can't possibly get "Helvetica Neue Black," under any circumstances. I've attempted to get around this, but all I get is a message saying that the font is not found, and that the default font will be used. Is it even possible to do this?
    Hand entering and altering kanji in DSP's manual editor will be a nightmare, if I can't figure a way around this (the STL file is re-loaded dozens of times for placement issues during the project, meaning manual edits would have to be re-done every time).
    Hopefully the next version will allow the user to edit the .rtf document with styles and fonts and import them as styled text the way it appears. Multiple fonts per line, so easy integration of various symbol fonts can be dealt with, etc.

    Nope, using "$FontName = Helvetica Neue Black" does not work. And you can't even do anything close to that with fonts whose weights are specified as W3, W5, W7, etc.
    I found another snippet buried in the new manual that states something to the effect that the name must be spelled exactly as it appears in the "Font Panel." If this is so, then you can only access two weights from any font, just like working with good old-fashioned windows...
    So, unless there is a DSP specific trick for the STL format, I'm going to guess it's not possible.
    And I cannot re-compile fonts with new names and data, since most of the fonts I will be working with, with this issue, are full Kanji Unicode fonts, and we would have to purchase a font-editor that, IIRC costs about a grand. I think the SysAdmin would frown over both aspects of that... ^_^

  • Have "OK" button selected when using JOptionPane.showMessageDialog

    When using the following instruction, I would like that user only hit enter instead of pointing the cursor on the "OK" button and then click.
    JOptionPane.showMessageDialog( null, jta_output , "Solution",
    JOptionPane.INFORMATION_MESSAGE );
    Is there a way to "preselect" the "OK" button so that user can only hit the enter key?
    Thanks

    Thanks for your answer.
    Nevertheless I don't see how to implement this method.
    1. How can I link the "OK" button, resulting from the run of "JOptionPane.showMessageDialog( null, jta_output , "Solution", JOptionPane.INFORMATION_MESSAGE );" instruction, and the method "setInitialSelectionValue"?
    2. What object and value must be specified to refer to the "OK" button, when using method "setInitialSelectionValue"?
    Regards

Maybe you are looking for