How to use autoclicker on automator?

How do i create a command for the mouse to keep clicking something on the internet?

Duplicate post.
Asked and answered here how do you add extension in dreamweaver cc

Similar Messages

How to use variable in automator?

So I am trying to create this dictation command in automator where i can go like this "Launch Safari" or "Launch iTunes" so how to use the variable for text in the command?

Hi,
This is possible without a variable.
Remove the "Ask for Text" and "Set value of Variable psize" actions.
In the "Scale Images" action:
-- Click on the "Options" button.
-- click on "Show this action when the workflow runs" checkbox.
This is almost similar to that "Ask for Text" action, since the "Scale Images" action will be displayed as a dialog, You can adjust the percentage in this dialog.

How To Use OnCommand Workflow Automation For Automated Data Protection During Failover

Introduction:
The NetApp OnCommand Workflow Automation (WFA) engineering team recently published a WFA pack that lets you recreate SnapMirror and SnapVault protection after MetroCluster switchover and switchback. A switchover/switchback occurs during a planned or unplanned failover. Introducing automation promotes best practices for continuous data protection during these types of occurrences. Watch this video to learn how to take the steps for implementing and executing this pack.
Step 1:
Recreate SnapMirror and SnapVault protection after MetroCluster switchover.
Step 2:
Retain SnapMirror and SnapVault data before MetroCluster switchback.
Step 3:
Recreate SnapMirror and SnapVault protection after MetroCluster switchback.
Other Resources:
This WFA pack is available for download on the Storage Automation Store.

Hi Ian,The WFA engineering team is getting ready to publish a blog article to accompany this new WFA pack. I hope you will find it helpful (stay tuned).Kristina

I've received an error message for for photoshop CS4 that I still use for some automated projects. ERROR: 150:30 Anybody know what this is and how to fix it?

I've received an error message for for photoshop CS4 that I still use for some automated projects. ERROR: 150:30 Anybody know what this is and how to fix it?

Please refer:
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac- os.html
Regards,
Ashutosh

How To Use Automation?

I was drawn to Garabeband '08 due to the automation feature. However, I can't figure out how to use it. I would like to add effects at certain points of the tracks. When I choose automation, I'll pick Vis EQ (for example) and then press o.k., but then nothing happens... or at least I'm not figuring it out. I was thinking you could "throw in" effects by creating and shifting/dragging the nodes (like in "volume" and "pan"). Please help.

Go to the automation control, where you used to be able to pick "Volume" or "Pan", and click the new option "Add Effect". You'll be able to select every effect that your track has. Make sure you get to the point where you acutally get a checkbox for that effect!

How to Use Acrobat SDK for Automation Using VB or Perl

Hi Forum,
I am a new bie, just 2 days old to acrobat and javascript, and I am basically a perl developer
I am using Adobe Acrobat 9 Pro,
I downloaded Acrobat SDK, but i don't know what else to do further, how to use??
I tried to start learning SDK, but no proper documents i found to learn and start using SDK,
Please suggest some guide or documentation for start learning Acrobat SDK (Step by Step guide)
Here with I have created a small script to merge two pdf
// Create a new PDF document:
var newDoc = app.newDoc();
// Insert doc1.pdf:
newDoc.insertPages({
nPage : -1,
cPath : "/d/sathish/1.pdf",
// Insert doc2.pdf:
newDoc.insertPages({
nPage : newDoc.numPages-1,
cPath : "/d/sathish/2.pdf",
// Save the new document:
newDoc.saveAs("/d/sathish/myNewDoc.pdf");
My code is working fine and merging properly,
Is there any way to execute this script through commandline or using some other scripting languages like perl or through VB
My objective is to automate the merging process without any manual intervention, I don't want to open acrobat manually to execute this javacript, i want to automate that process too,
Please suggest me which will be very helpful to me,
Thanks in advance
Thanks & Regards
Sathish V.

It is a big SDK and to learn its features requires a lot of reading. But to start with I guess I should start with "Introduction to SDK".
Since you want to control Acrobat from another application you should consider this under "Interapplication communication". You will be using OLE/COM.

Hi! How do I switch existing automation data for one parameter to another?

Hello! I am new to Logic 8, and actually to using the Logic automation feature. Here is the deal: I have some old-school Logic event data that I recorded as a kind of automation (before the current kind of dedicated automation) for an EXS24 parameter. I need to change this event 'automation' to actual Logic automation, as Logic 8 does not read it (as Logic 7 did before it). So, I highlighted all of the events in my old-school 'automation' region in the event list. I had to change the number value to a common number assignment so that I could Change Selected Event Data into Track Automation. I selected volume (number seven, I believe), and than highlighted all events, clicked on the event region, than went to options and selected my desired automation transformation destination (say that three times fast). Great! I have my region as automation! Logic 8 knows what to do with this! But, it is volume. I need it to control the LFO 2 Rate of the EXS24. Problem is, that when I switch the automation parameter from Volume to LFO 2 Rate, the automation disappears. It seems as though that automation data is only for Volume. So, how might a charming gentleman, such as myself, go about keeping/converting the same automation, but for the parameter I want to change it to?
Thanks! =)

Hold "command" when switching between automation parameters.
Then you will get a dialog offering you the option to convert the existing parameter's data into the destination parameter, or "copy and convert" (which does the same but leaves the existing volume automation data intact.)

How do I schedule an automator script to run at a certain time every day?

How do I schedule an automator script to run at a certain time every day?
This used to be done through iCalendar and this option is no longer available.
How do I do this?
--Kenoli

Kenoli Oleari1 wrote:
How do I schedule an automator script to run at a certain time every day?
This used to be done through iCalendar and this option is no longer available.
How do I do this?
--Kenoli
You can use lauchd to run the script.
Here's an example of an Automator App that I have scheduled to run at 7am daily:
You would save this as com.yourname.plist and put it the the Folder: ~/Library/LaunchAgents/ (then log out and back in, or reboot)
(To run a workflow, change open to automator)
(A nice GUI launchd editor is Lingon)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Label</key>
          <string>com.tonyt.EventReport</string>
          <key>ProgramArguments</key>
          <array>
                    <string>open</string>
                    <string>/Users/Tony/Library/Scripts/Events Report.app</string>
          </array>
          <key>StartCalendarInterval</key>
          <dict>
                    <key>Hour</key>
                    <integer>7</integer>
                    <key>Minute</key>
                    <integer>0</integer>
          </dict>
</dict>
</plist>

How to use Soap with Netweaver?

Hi,
I am new to SAP Netweaver, I was wondering how to use SOAP messaging with SAP Netweaver?
Thanks
Falak

I want to secure the message between my web service and a Automated activity in SAP Netweaver BPM (Process
development). I think in this case the usage of of SOAP adapter may not be useful.
Security parameters (settings) can be defined for Sender SOAP Adapter (as in your case it is)......to know more check this help section: http://help.sap.com/saphelp_nwpi71/helpdata/EN/fc/5ad93f130f9215e10000000a155106/content.htm
Check the section: Define Security Parameters.
Regards,
Abhishek.

How to use Multiple selection in ADF faces

i i would like to know how to use an multiple selection (ADF select many choice) to update the database.

Hi,
Timo is correct that there is no automated way for doing this. You can access the select many selection from a managed bean either accessing the ADF binding layer or by referencing a managed bean array property. So the use case is important. Use case would include the database attribute type to update
Frank

How can I get effects automation to work?

I'm sure I'm missing something here but I can't work out how to use effects automation.
The help topic says open the automation tab click "add automation". I do that and get another dialog box where I select the effect (echo/reverb for instance) and OK that.
Then what?
I'd expected to be able to select an effects automation curve in the same way I can select volume or pan but the only curves available are still the volume and pan curves.
I can't see an automation curve for that effect or anyway of selecting what echo/reverb I want.
Any suggestions?
Cheers
Dick

No, I'm still not getting any other automation curves other than the volume and pan. When I go to "add automation" I see the effects I've assigned to the track and can select and OK them but I can't see any automation curve afterwards.
Dick,
I'm not sure what you're looking for.
You refer to the "automation curve". All you should see is a straight horizontal line. (the terminology can be a little confusing)
You have to add control points of automation on the line which you then move to create your own curves to change the parameter’s value over time.
To add control points:
Click the "automation curve" at the place where you want to add a control point.
If you need more details, do a search in GarageBand Help for "Automation".
WH

Oracle ADF RichSelenium class - any examples on how to use this?

Digging around the net and found that there is a class for Selenium testing ADF Rich components, namely oracle.adf.view.rich.automation.selenium.RichSelenium located in oracle_common\modules\oracle.adf.view_11.1.1\adf-richclient-automation-11.jar.
I've been searching for half a day now and cannot find any example code on how to use RichSelenium class for the life of me.
There are examples of using Selenium with ADF (http://www.oracle.com/technetwork/articles/adf/part6-094560.html) but not using RichSelenium.
Any lead or information would be highly appreciated, thanks in advance.

OK figured out how to start using this RichSelenium class and thought I'd post my findings on this thread for the sake of anyone else who wants to know. Here's my code:
-- START OF CODE
package my.richselenium.test;
import java.util.concurrent.TimeUnit;
import org.junit.After;
import org.openqa.selenium.WebDriver;
import org.openqa.selenium.WebDriverCommandProcessor;
import org.openqa.selenium.firefox.FirefoxDriver;
* Base test class for handling common functionality across tests - setting up web driver, retrieving URL and cleaning
* up and resources.
public class myTest {
public void runTest() {
// Create WebDriver
WebDriver myWebDriver = new FirefoxDriver();
// Setup Web Driver Command Processor
WebDriverCommandProcessor wdcp = new WebDriverCommandProcessor("http://www.google.com", this.driver);
// Instantiate RichSelenium class object
RichSelenium rs = new RichSelenium(wdcp);
// Load specific URL
rs.open("http://www.oracle.com");
// Let's do some RichSelenium specific processing
String [] someArray = rs.getAllFields();
List<String> someList = Arrays.asList(someArray);
// for loop advance
for (String temp : someList ) {
System.out.println(temp);
rs.close();
-- END OF CODE
-----------------------------------------------------------------------------------------------------------------------------------------

How to use SNRO to create daily number range?

Dear all,
I would like to know how to use SNRO to create a daily number range.
We would like to have the following sequence. The first 8 digits are date and the last 2 digits are number sequence. Each day, the last 2 digits will start from 01 again. i.e. <8-digits date><2-digit sequence>
For example, today is 22 May 2006,
2006052201
2006052202
2006052203
Tomorrow will have sequence like this:
2006052301
2006052302
2006052303
Thanks!

Thomas,
I don't there is a automated way of doing as the dates do NOT follow a numbering sequence. What you can do is to create a number range for getting the last two digits every day and manually concatenate the date with the serial number.
However, as you have to reset the counter every day that might be a issue.
Regards,
Ravi

How to use RFUMSV50

Dear All,
I have not used this Program (RFUMSV50) earlier. Is it a new addition for Service Tax settings in India?
We used to post Service Tax Input to One Intermediary account. Whenever the vendor is paid, we used to transfer the service tax component from Intermediary account to Service Tax Receivable Accout.
This account is used in Cenvat Utilisation.
Now I have come across this Program. How to use it? Do you need any separate configuration?
Pl advice,
Thanks & regards,
Gov

Please be informed that , as stated the service tax is accounted for in the interim account and then transferred to the credit account based on the payment.
This new program is for the automation of transfer of service tax from interim to final account. The program has certain selection parameters which can be used and posting done.
This requires the change in the tax code configuration. The concept of Source and target tax code is being used and assignment of Interim accounts to source tax code and final accounts to target tax code.
You may refer SAP note
Sl. No.     SAP Note
1     921634 u2013 Service Tax India Transfer from Interim to Final Account
2     1076339 RFUMSV50: Invoices with withholding tax
3     1076653 RFUMSV50: Error 891 for Invoices with withholding tax
4     1130592 RFUMSV50: Invoices with several tax codes
6     643273 FB01:Summarization BSET with u201CDetermine taxes line by lineu201D
7     1162059 RFUMSV50: Wrong amounts for invoice with many BSET lines
8     1017544 RFUMSV50: FF804 Payment with residual items in invoices with
9     1168751 RFUMSV50: Multiple Tax codes service tax transfer
Regards,
Mamta Sarda

How to use notifier

Hello,
I will try to creat extention for photoshop in Flash Builder 4 using CS Extention Toolkit 3.4.
For automatic or something happen, i think we have to used notifier but i do't no how to used it and where i have to code that thing.
Or any other thing used for automation?
Thanks
Matt Forman

I think I have got it working. Check out the new snapshot to see what I changed.
Attachments:
SetNotificationNew.jpg ‏85 KB

How to use autoclicker on automator?

Similar Messages

Maybe you are looking for