How to Use Cost Depreciation 20 in assets

Hi,
All could you please tell possible ways to use Cost depreciation
After that
the below points i am expecting
1 We need to recognize both type(costed depreciation) of depreciation.
2 Only costed depreciation we need to recognize reversal entry that sample is as follows.
3   eg    Recognize DR Costed depreciation   CR Accumulated costed depreciation
      ( If you need new GL account you can register on 600 environment.)
4   eg    Reversal   DR Accumulated depreciation   CR    Reversal costed depreciation
       ( If you need new GL account you can register on 600 environment.)
5   Conclusion Based on above 3 and 4, our P/L impact is zero.
6   Above 3 and 4 transaction recognize is not by manual.
Could you please suggest the above example how to do in SAP

You just need to create a new depreciation area for cost deprecition and do specific config as per your requirement.
Tarun

Similar Messages

How to use cost center hierarchy?

Hi,
How to use cost center hierarchy?I have created that but how to use that.Can somebody help me?
Sekar

Once the Cost Centre Hierarchy is Created, it can be used in Profit Centre Reports.
Choose Financials -> Cost Accounting -> Profit Center Report ->Template.
Here Choose, the Cost Centre Hierarchy the you had created and generate the report.
Also refer these threads
[Reg... Costcenter hierarchy;
[cost centre hierarchy;

How can i calcilate cost depreciation for assets

Hi.
can anybody tell me how can i calculate
cost depreciation for an asset.
i have used one function module DEPR_RECALCULATE.
but it will allow only one date and it will calculate depreciation for total year .
i want to pass the two date .
how can i calculate depreciation between two periods.

Hi,
Check this FM: AM_ASSET_DEPR_CALCULATE
Regards
Kannaiah

How to change cost center in Asset Master record ?

Hi SAP Gurus,
My client is asking me to change cost centers in Asset Master records using LSMW. Currently, the field cost center is in display mode. In order to change the cost center, the field cost center must be in change mode while recording in LSMW. I have changed screen layout rule for Asset Master data. I have selected radio button "Optional" for cost center in screen layout for Asset Master data. But still cost center field is in display mode in Asset Master record. It must be changeable.
Please suggest me how I can resolve the issue.
Regards,
K.S.K

Hi Saravana,
We can change the cost center for AuC Investment measure at WBS element level. For that purpose we need to go to AuC Investment measure Asset master record and check WBS element under Origin Tab. Double click on WBSE and then check the cost center under Assignment tab. And also check the cost center in Asset master record for the same. Now you can go to T.Code CJ12 (Change WBS Element) and change the cost center for the same. Once you make changes system automatically change the cost center in asset master record for the same.
Note: - Now you have to identify all the AuC Investment measure Assets and the WBS Element for the same. Then change the cost center in WBS Element record. And the corresponding changes will be done in relevant Asset master record automatically.
But before making the change please check with the PS/PM consultant regarding changes in WBS element. Means where it will effect?
With Regards
Ravinder Kaushik

How to use Cost Based Optimizer

Hi,
I'm looking for a documentation about CBO, I found some information through google and here but anyone knows where I can found more informaton about CBO, how to use, how i'ts increase the performance and more?
Thank You

See Oracle® Database Performance Tuning Guide

How to use WBS element in Asset master data upload

Dear All
Does any body know how to treat field WBS element in Asset master during upload.
Field POSNR in table ANLA is of 8 characters, but WBS element which is entered in asst master is more than 8 char.
I vaguely remember tht with wbs system internally assign a different number.
Has anybody come across this issue?
Please help
Thanks
Sanjeev

There are in the asset 2 fields for PS
One is filled when you do an settlement from an WBS (is not possible to fill in)
The other one you found in the the tab time dependend like cost center.
This field is available when you have assign the possibilety to do depreciation to an WBS.
Paul

How to change cost center in asset master data through mass changes

Hi sap gurus,
Hi i have 20 assets i have to change the cost center through mass changes provide the solution.
regards,
ramanjaneyulu.

Hi,
For 20 assets it won't be useful to write a CATT or LSMW. So, either enter it manually or you could correct directly in the tables (ANLZ), though it's generally not recommended.
Regards,
Eli

How to Use Same Asset Number with Different Sub-number

Hi
We want to sell some assets and buy them back on lease. We want to use same Asset number with different sub-number under the same company code. This new asset will be under different Depreciation Area (Statistical).
We use external numbes for assets . And same asset number range is used by all compnay codes.
Please suggest whether this is possible & how.
With Regards,
Nitin

Hi,
Go to field status for asset master data section and change the field status to optional for field Deactivation date, then follow the below steps.
You can create an sub asset number to an asset, which is already deactivated by retirement as like normal sub asset creation with AS11.(While creating sub number, you need to remove cap date and deactivate dcate field manually from asset master)
With this you can get new asset number as same as your old retired asset main number and but sub number will be different.
To post to diff dep area, other than 01, then you first create an acq transaction type, which will post only to specific areas and then use the new asset number in ABSO to post acq with your custom TTY.
I have tested and found working well in my system............Try now in your test client
Thanks,
Srinu

How to use Depreciation In Account

Hi Experts,
I am working on SAP 2005 B PL 01 , i want to use the Depreciation Manualy and automaticaly but i am unable to find a solution ,can any one help me regarding the same?
Regards

Hi
You have an add on called bizAsset
bizAsset Add-on for SAP Business One enables organizations to manage tangible Fixed Assets within SAP Business One. This is integrated with the standard component, Financials. bizAsset calculates the depreciations according to the costs of acquisitions and performs the relevant postings in the General Ledger.
Follow the link to get more details on the same
http://www.bizonecenter.com/html/pro_bizasset.html
Regards
Rashid

CIP Assets - How to enter cost

Hi,
I'm new to Assets and need to know how to add costs to a CIP Asset. When I manually add a CIP asset, the cost must be $0, so what is the process to add costs?
Any help would be greatly appreciated.
Thanks,
Chris

Figured it out - you can enter costs using the Source Lines window, or using Mass Additions.

HOW TO CHANGE THE USEFUL LIFE FOR MORE ASSETS AT A TIME FOR ASSET CLASS

Hi All,
Asset which is under Asset Class Support system-B700. Here every thing is ok but the problem in USE FULL LIFE which is come by default. It must be 4 instead of 5.   So can any body help me out from this how to change the Useful life in that Asset class. In that Asset Class we have the morethan 200 Assets. It was happend in Prdocution system so now the problem is where i can change the useful life for the asset class either in DEV or PRD.
       Also i want to know the information of How these assets are Uploaded into the system (Lsmw or etc). this is very urgent for me.
Thanks in Advance,
Regards,
Siva.

Hi Ashok,
     Can i know the reason how it was happend. i mean instead of 4 years the system showing is 5yesrs any reason is there behind that.
Thanks in Advance.

Wrong depreciation calcualtion when we change useful life of an asset

Hi,
We change the useful life of an asset during the middle of the year. The deprecaiton calculation is not effecting correctly for the remaining useful life of an asset.
We are using stright line method of depreciaion. I will appreciate if any post some tips what is wrong .
Example:
Current State:
Acquisition value: 300,000
Acquisition date: 1/1/08
Useful life: 3 years
NBV 12/31/08: 200,000
NBV 6/30/09: 150,000
New life: 2 years, starting 7/1/2009
Current methodology:
NBV at 12/31/08 divided by new remaining life as of the beginning of the year (2009) $200,000 / 12 months = $16,667
Depreciation expense in 7/31/09: $66,669 ([16,667 * 7 months = 116,669] minus depreciation at old method booked for first 6 months of 2009 [200,000/24 = 8,333 * 6 = $50,000]). $116,669 u2013 50,000 = $66,669
Monthly Depreciation expense between 8/31/09-12/31/09: $16,667 / month
Future State:
Requested methodology:
NBV at 6/30/09 divided by remaining life as of the date of the change: (150,000/6mos) $25,000
Can any one explain what is the issue

Hi,
By default, any change in depreciation parameters will recalculate depreciation from the beginning. If you want to change depreciation terms on different phases, you may need to introduce a depreciation key which changes percentage in multi-level method.
Best Regards,
Madhu

How to get the depreciation areas for an asset in particular period

Hi frndz,
how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
Thanks and regards.
Harisumanth.Ch

Try table ANLB, then read ANLC.
Regards.

How to use 2 GL for loss made on asset retirement w/o revenue ?

how to use 2 GL for loss made on asset retirement w/o revenue.
hello everyone
i have some trouble.
my company want to use 2 GL account for asset retirement
example some time use GL 6500001 some time use 6500002
in standard configuration AO90 , field loss made on asset retirement w/o revenue, there is only one field.
so i can use only one G/L.
it' s not good if i must to change configuration (and transport request )every time that user need to change GL.
now i got one idea.
i know that table T095 keep account determinaton and GL account data.
so if i make program that change data from table T095 directly. i donot need to change config everytime.
but i am not sure that this way will make impact other standard program or not.
i will wait for better idea from everyone.
please help.

Substitution consist of several steps each with two parts:
1- Prerequisite
2- Replacement
If the prerequisite is satisfied (TRUE), substitution (Replacement) is performed.
Transaction Code: OBBH.
Thank you
Javed

How to use LSMW using the IDOC to upload and maintain cost center group

Hi Everyone,
Is there anyone who knows how to use LSMW using the IDOC functions instead of the recording. I wanted to upload the alternative cost center group I created in the system.
reply would be greatly appreciated
Warm Regards

Hi Praveen,
There is a risk trying to migrate data directly into standard tables because this can generate database inconsistences or wrong inserted data according to what is customized in the target system. I do not recommend migrate like this.
With LSMW you use objects like direct input programs, idocs, bapis and recorded batch input. Try to create a project and use an standard object for your data. Also, check in SXDA transaction (Goto-->DX programs) if there is a standard program for your data.
Anyway, if you want to upload data directly to tables, read below thread:
["UPLOAD CSV FILE";
[how to upload .csv file into a custom table;
Regards,
Roger

How to Use Cost Depreciation 20 in assets

Similar Messages

Maybe you are looking for