How to use estimation rule in MDM2.0.1

Hi,
I am trying to use the existing estimation(interval interpolation estimation) in MDM2.0.1 for interval data.But while performing validation it is nt estimating the meter data and status is showing "exception" not finalized.
can anybody help me in this regard?
Thanx in advance.
Regards
sunil

Hi,
I am trying to upload the scalar data by using IMD Seeder Business object,but in response i am getting the following error.Please guide me in this matter..........
<D1-InitialLoadIMD>
<initialMeasurementDataId>81661356582928</initialMeasurementDataId>
<preVEE>
<dvcIdN>ER-MAN-OH-001</dvcIdN>
<mcId>816248544981</mcId>
<uom>KWH</uom>
<stDt>2010-08-01-00.00.00</stDt>
<enDt>2010-09-01-00.00.00</enDt>
<enQty>544</enQty>
<imdType>D1IL</imdType>
<inShift>D1NS</inShift>
<mcm>1.000000</mcm>
<tz>USPACIFIC</tz>
<sts>
<stsL>
<s>1</s>
<st>REGULAR</st>
</stsL>
</sts>
</preVEE>
<processData>
<isShiftedStartEnd>D1NO</isShiftedStartEnd>
<isShiftedIntervals>D1NO</isShiftedIntervals>
<isErrorEncountered>D1YS</isErrorEncountered>
<logs>
<logsList>
<logsEntry>
<sequence>1</sequence>
<mo>D1-IMD</mo>
<logEntryType>F1SY</logEntryType>
<logDateTime>2011-04-15-00.21.22</logDateTime>
<user>SYSUSER</user>
<messageCategory>11801</messageCategory>
<messageNumber>10965</messageNumber>
</logsEntry>
</logsList>
</logs>
</processData>
*<boStatus>ERROR</boStatus>* <bo>D1-IMDSeeder</bo>
<creationDateTime>2011-04-15-00.21.22</creationDateTime>
<boStatusDateTime>2011-04-15-00.21.22</boStatusDateTime>
<isTraceOn>D1NO</isTraceOn>
<isIntervalDateTimePopulated>D1NO</isIntervalDateTimePopulated>
<isReprocessPerformed>D1NO</isReprocessPerformed>
<fromDateTime>2010-08-01-00.00.00</fromDateTime>
<toDateTime>2010-09-01-00.00.00</toDateTime>
<timeZone>USPACIFIC</timeZone>
<isAutomatedRetry>D1NO</isAutomatedRetry>
<version>4</version>
</D1-InitialLoadIMD>
It is unable to import usage data........
plz help.....

Similar Messages

How to use customized rule in step mail workflow

Dear All:
I have created a customized rule,which is working fine when I simulate it, it is fetching SAP user from a ztable which I created.
My requirement is how to use the rule in my workflow which have one "send mail" step. As in "send mail" under Receipt Type I cant find rule option.
Kindly help me.
Rahul.

1.Create a method GET_ACTORS using RH_GET_ACTORS,
2.Create a container element 'Actors' type string with multiline.
3.Create Task, where you can call the Method GET_ACTORS and pass the Container values of 'Actors' from Method->Task->Workflow
4.Create a Step type before creating the Step mail and include the previous Task.
5.Now you can create the step Mail. Give the Recipient Type as 'Expression'-> Select the Container Element 'Actors' from WF container
But remember the values should be Passed from the task to Workflow in Binding correctly.
Regards,
Sriyash

How to use Organization Rule?

hi,expert
how to use Organization Rule?
I create Organization Rule, Organization level always display Plan Verion(PLVAR).
how to Maintenance Organization in Organization Rule?
please help me!
thanks

The Access Control HOWTO Wiki has an excellent document describing organizational rules and org level reporting:
https://wiki.sdn.sap.com/wiki/display/BPX/Governance%2CRisk%2CandCompliance%28GRC%29How-ToGuides

How to use the rule in workflow

Hi ,Guy ,
    I am implementing the workflow project nowaday ,and when I use the rule to determine the step's agent , I often come across all kinds of strange problem and I do not know how to slove it goodly ,for example I do not know how to get the agent from orgainization unit etc .
can anybody give me some advices or some relevant docments(I have read the SAP standard material BIT601/BIT603/BIT610) .thank a lot .
Jialiang.Qiu

Yes , you can define your own rule. You need to populate the table of type SWHACTOR with whatever agents you want to maintain . See the below code :
function z_cvwf_dwnam_approver_get.
""Local Interface:
*" IMPORTING
*"     VALUE(ACT_PLVAR) LIKE P1208-PLVAR DEFAULT SPACE
*"     VALUE(ACT_ISTAT) LIKE P1208-ISTAT DEFAULT '1'
*"     VALUE(ACT_BEGDA) LIKE P1208-BEGDA DEFAULT SY-DATUM
*"     VALUE(ACT_ENDDA) LIKE P1208-ENDDA DEFAULT SY-DATUM
*" TABLES
*"      AC_CONTAINER STRUCTURE SWCONT
*"      ACTOR_TAB STRUCTURE SWHACTOR
*" EXCEPTIONS
*"      NO_ACTIVE_PLVAR
*"      OBJTYP_NOT_VALID
*"      NO_ACTOR_FOUND
data: l_user like draw-dwnam, "User
        l_dokar like draw-dokar, "Document type
        l_doknr like draw-doknr, "Document number
        l_dokvr like draw-dokvr, "Document version
        l_doktl like draw-doktl. "Document part
data: xausp like ausp.
*Data for AUSPC_V1 selection
data: xatinn(12) value 'APPROVER',
        xklart like ausp-klart value '017',
        xobjek like ausp-objek.
include <cntain>.
swc_get_element ac_container 'DOCUMENT'        l_doknr.
swc_get_element ac_container 'DOCUMENTPART'    l_doktl.
swc_get_element ac_container 'DOCUMENTTYPE'    l_dokar.
swc_get_element ac_container 'DOCUMENTVERSION' l_dokvr.
Create objek from DRAW key fields
write: l_dokar to xobjek,
         l_doknr to xobjek+3(25),
         l_dokvr to xobjek+28(2),
         l_doktl to xobjek+30(3).
Get Approver number
call function 'CONVERSION_EXIT_ATINN_INPUT'
exporting
    input        = xatinn
importing
   output        = xatinn.
From table AUSP
clear sy-subrc.
select single * from ausp
           into xausp
         where objek = xobjek
         and    atinn = xatinn
         and    klart = xklart.
Assign ATWRT to USER RESPONSIBLE FOR APPROVAL
if sy-subrc > 0.
    raise no_actor_found.
endif.
actor_tab-otype = 'US'.
actor_tab-objid = xausp-atwrt.
append actor_tab.
endfunction.

How to use the rule MessageFromExtr?

Hi guys,
I'm trying to put dynamically a multiline text with some paragraphs in bold, and as I can see the best way to achieve this is using the rule MessageFromExtr, but I'm not able to do it successfuly.
Currently I have the data mapped through the XDD record "TESTXDD" from my XML input file with the MOVE_IT rule, a section "TESTSECTION", with the field "TESTFIELD" who has the MESSAGEFROMEXTR rule,
This a the section in the XML where the data is set:
<TEST VALUE="aslkdalsd <Font:11110>bold<Font> adasdasd"/>
I don't understand how should be done this, in the help file RULES.CHM is mentioned something about a "DataDictionary" section in some INI file, but I cannot get it at all.
This is the error I'm getting when I run the process.
[10:04:26AM] Error: Company - LINEOFBUSINESS LOB - DNO Transaction 1312
[10:04:26AM] Error: DM10405: in MESSAGEFROMEXTR: Unknown parameter in field rule. Field <TESTFIELD>
[10:04:26AM] Error: Company - LINEOFBUSINESS LOB - DNO Transaction 1312
[10:04:26AM] Error: DM10411: in MESSAGEFROMEXTR: Image <KICK_TO_WIP_SECTION> Could not parse RuleParms <>
[10:04:26AM] Error: Company - LINEOFBUSINESS LOB - DNO Transaction 1312
[10:04:26AM] Error: DM12051: in RPProcessOneField(): Unable to execute rule: <MESSAGEFROMEXTR>. Current Image is <TESTSECTION>
[10:04:26AM] Error: Company - LINEOFBUSINESS LOB - DNO Transaction 1312
[10:04:26AM] Error: DM12048: in RPProcessFields(): Unable to RPProcessOneField(pRPS) <TESTFIELD>. Processing will continue for image <TEST>. See INI group:<GenDataStopOn> option: FieldErrors
[10:04:29AM] Error: An error occurred during processing.
I'm using Documaker v12.1.
Can anyone give me a clue about how should be set this?
Thanks in Advance,
Max.

This doesn't specifically answer your question as to how to use MessageFromExtr, but have a look at the XML Guide http://docs.oracle.com/cd/E22582_01/xmlguide.pdf,specifically pages 36-37. You can pass some simple markup tags in your extract data to perform bolding, and an example is shown in the doc.
-Andy

How to use rule in workflow

Hi all.
I am new to workflow. Can you pls let me know how to use the rule in worklow .I have created a rule using the transaction PFAC. Pls provide me some screen shots which demonstrates hoe to use this rule in workflow.Thanks in advance.
Cheers,
sami.

Hi SAMI
go to this pdf in SCN.All about rules.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d053fe48-6513-2b10-a59f-871923ff99d8
Second thing workflows related question should be posted at
SAP-Netweaver -> workflow
Regards
s@chin

How to use rule and send the same email to multiple recipents

Hi,
My requirement is to send the workitem to the multiple recipents. one of my reiend suggest me to use the rule but i don't know how to use that .
can any one of you suggest me how to use rule in workflow.
Also i want to send the same email to multiple recipent .how can i do it by using the multiline variable...please advice me with example if possible..
Note :- Is it necessary to saparate the email id with comma or i will add all the email next one another..
Please suggest.
Thanks in advance ,
Anand

Hi Anand,
I would suggest you first follow the guidelines of the forum and a little searching. One of your questions has been asked just a few threads below.
Regards,
Martin

How to tune data loading time in BSO using 14 rules files ?

Hello there,
I'm using Hyperion-Essbase-Admin-Services v11.1.1.2 and the BSO Option.
In a nightly process using MAXL i load new data into one Essbase-cube.
In this nightly update process 14 account-members are updated by running 14 rules files one after another.
These rules files connect 14 times by sql-connection to the same oracle database and the same table.
I use this procedure because i cannot load 2 or more data fields using one rules file.
It takes a long time to load up 14 accounts one after other.
Now my Question: How can I minimise this data loading time ?
This is what I found on Oracle Homepage:
What's New
Oracle Essbase V.11.1.1 Release Highlights
Parallel SQL Data Loads- Supports up to 8 rules files via temporary load buffers.
In an Older Thread John said:
As it is version 11 why not use parallel sql loading, you can specify up to 8 load rules to load data in parallel.
Example:
import database AsoSamp.Sample data
connect as TBC identified by 'password'
using multiple rules_file 'rule1','rule2'
to load_buffer_block starting with buffer_id 100
on error write to "error.txt";
But this is for ASO Option only.
Can I use it in my MAXL also for BSO ?? Is there a sample ?
What else is possible to tune up nightly update time ??
Thanks in advance for every tip,
Zeljko

Thanks a lot for your support. I’m just a little confused.
I will use an example to illustrate my problem a bit more clearly.
This is the basic table, in my case a view, which is queried by all 14 rules files:
column1 --- column2 --- column3 --- column4 --- ... ---column n
dim 1 --- dim 2 --- dim 3 --- data1 --- data2 --- data3 --- ... --- data 14
Region -- ID --- Product --- sales --- cogs ---- discounts --- ... --- amount
West --- D1 --- Coffee --- 11001 --- 1,322 --- 10789 --- ... --- 548
West --- D2 --- Tea10 --- 12011 --- 1,325 --- 10548 --- ... --- 589
West --- S1 --- Tea10 --- 14115 --- 1,699 --- 10145 --- ... --- 852
West --- C3 --- Tea10 --- 21053 --- 1,588 --- 10998 --- ... --- 981
East ---- S2 --- Coffee --- 15563 --- 1,458 --- 10991 --- ... --- 876
East ---- D1 --- Tea10 --- 15894 --- 1,664 --- 11615 --- ... --- 156
East ---- D3 --- Coffee --- 19689 --- 1,989 --- 15615 --- ... --- 986
East ---- C1 --- Coffee --- 18897 --- 1,988 --- 11898 --- ... --- 256
East ---- C3 --- Tea10 --- 11699 --- 1,328 --- 12156 --- ... --- 9896
Following 3 out of 14 (load-) rules files to load the data columns into the cube:
Rules File1:
dim 1 --- dim 2 --- dim 3 --- sales --- ignore --- ignore --- ... --- ignore
Rules File2:
dim 1 --- dim 2 --- dim 3 --- ignore --- cogs --- ignore --- ... --- ignore
Rules File14:
dim 1 --- dim 2 --- dim 3 --- ignore --- ignore --- ignore --- ... --- amount
Is the upper table design what GlennS mentioned as a "Data" column concept which only allows a single numeric data value ?
In this case I cant tag two or more columns as “Data fields”. I just can tag one column as “Data field”. Other data fields I have to tag as “ignore fields during data load”. Otherwise, when I validate the rules file, an Error occurs “only one field can contain the Data Field attribute”.
Or may I skip this error massage and just try to tag all 14 fields as “Data fields” and “load data” ?
Please advise.
Am I right that the other way is to reconstruct the table/view (and the rules files) like follows to load all of the data in one pass:
dim 0 --- dim 1 --- dim 2 --- dim 3 --- data
Account --- Region -- ID --- Product --- data
sales --- West --- D1 --- Coffee --- 11001
sales --- West --- D2 --- Tea10 --- 12011
sales --- West --- S1 --- Tea10 --- 14115
sales --- West --- C3 --- Tea10 --- 21053
sales --- East ---- S2 --- Coffee --- 15563
sales --- East ---- D1 --- Tea10 --- 15894
sales --- East ---- D3 --- Coffee --- 19689
sales --- East ---- C1 --- Coffee --- 18897
sales --- East ---- C3 --- Tea10 --- 11699
cogs --- West --- D1 --- Coffee --- 1,322
cogs --- West --- D2 --- Tea10 --- 1,325
cogs --- West --- S1 --- Tea10 --- 1,699
cogs --- West --- C3 --- Tea10 --- 1,588
cogs --- East ---- S2 --- Coffee --- 1,458
cogs --- East ---- D1 --- Tea10 --- 1,664
cogs --- East ---- D3 --- Coffee --- 1,989
cogs --- East ---- C1 --- Coffee --- 1,988
cogs --- East ---- C3 --- Tea10 --- 1,328
discounts --- West --- D1 --- Coffee --- 10789
discounts --- West --- D2 --- Tea10 --- 10548
discounts --- West --- S1 --- Tea10 --- 10145
discounts --- West --- C3 --- Tea10 --- 10998
discounts --- East ---- S2 --- Coffee --- 10991
discounts --- East ---- D1 --- Tea10 --- 11615
discounts --- East ---- D3 --- Coffee --- 15615
discounts --- East ---- C1 --- Coffee --- 11898
discounts --- East ---- C3 --- Tea10 --- 12156
amount --- West --- D1 --- Coffee --- 548
amount --- West --- D2 --- Tea10 --- 589
amount --- West --- S1 --- Tea10 --- 852
amount --- West --- C3 --- Tea10 --- 981
amount --- East ---- S2 --- Coffee --- 876
amount --- East ---- D1 --- Tea10 --- 156
amount --- East ---- D3 --- Coffee --- 986
amount --- East ---- C1 --- Coffee --- 256
amount --- East ---- C3 --- Tea10 --- 9896
And the third way is to adjust the essbase.cfg parameters DLTHREADSPREPARE and DLTHREADSWRITE (and DLSINGLETHREADPERSTAGE)
I just want to be sure that I understand your suggestions.
Many thanks for awesome help,
Zeljko

How can I remove a flag using a rule in Mail.app?

I'm using Mail Act-On to flag messages that are important. I also have got a smart mailbox that displays only those messages that are flagged, this is my "To Do" mailbox.
Once I've read and answered the message I want to remove the flag, preferrably via a rule using Mail Act-On as well. However in the rules dialog in the Mail.app preferences there's only the option to set a flag, not to remove one.
Can anyone help: how can I remove a flag using a rule?? Maybe via Applescript as the last resort?
Thanks for any advice Jan

Hi Jan
I haven't gotten around to put unread and unflag into Mail-ActOn but MailTags has the functionality. MailTags also allows you to mark a message unread via act-On rule.
It is interesting to note that apple doesn't include unflag and unread as the rules were originally intended to apply only to new messages (of which none should be read or flagged) with that logic, there would be no need for unread, unflagg.
@David: The reason to do it via Act-On rule would be to set up a sequence of events, one of which is to unflag, others may be to set keywords, move messages, set colors etc.
Scott

How to use complex function as condition in Oracle Rule Decision Table?

How to use complex function as condition in Oracle Rule Decision Table?
We want to compare an incoming date range with the date defined in the rules. This date comparison is based on the input date in the fact & the date as defined for each rule. Can this be done in a decision table?

I see a couple of problems here.
First, what you posted below is not a syntactically valid query. It seems to be part of a larger query, specifically, this looks to be only the GROUP BY clause of a query.
Prabu ammaiappan wrote:
Hi,
I Have a group function in the Query. Below is the Query i have used it,
GROUP BY S.FREIGHTCLASS,
R.CONTAINERKEY,
S.SKU,
S.DESCR ||S.DESCRIPTION2,
S.PVTYPE,
RD.LOTTABLE06,
R.WAREHOUSEREFERENCE,
RD.TOLOC,
R.ADDWHO,
R.TYPE,
S.CWFLAG,
S.STDNETWGT,
S.ORDERUOM,
R.ADDDATE,
C.DESCRIPTION,
(CASE WHEN P.POKEY LIKE '%PUR%' THEN 'NULL' ELSE to_char(P.PODATE,'dd/mm/yyyy') END),
NVL((CASE WHEN R.ADDWHO='BOOMI' THEN RDD.SUPPLIERNAME END),SS.COMPANY),
RDD.BRAND,
S.NAPA,
RD.RECEIPTKEY,
R.SUSR4,
P.POKEY,
RDD.SUSR1,
r.STATUS, DECODE(RDD.SUSR2,' ',0,'',0,RDD.SUSR2),
rd.SUSR3Second, the answer to your primary question, "How do I add a predicate with with a MAX() function to my where clause?" is that you don't. As you discovered, if you attempt to do so, you'll find it doesn't work. If you stop and think about how SQL is processed, it should make sense to you why the SQL is not valid.
If you want to apply a filter condition such as:
trunc(max(RD.DATERECEIVED)) BETWEEN TO_DATE('01/08/2011','DD/MM/YYYY') AND TO_DATE('01/08/2011','DD/MM/YYYY')you should do it in a HAVING clause, not a where clause:
select ....
from ....
where ....
group by ....
having max(some_date) between this_date and that_date;Hope that helps,
-Mark

How to use rules and roles in workflow?

Hi experts,
I am a beginner in workflow. Could any one tell me how to use rules and roles in workflow ?
Can u pls tell me the steps to follow?
and more over what are all the <b>important things</b> we have to learn in workflow module ??
I shall be thankful to u.
Thanks
uma

Hi
Workflow automates the steps and activities in a business process according to predefined procedures and rules.
Workflow presents information and documents to the appropriate knowledge worker or agent (another entity such as a program) to make a decision or perform an activity.
Workflow tracks each and every step in the process flow and maintains an ongoing status.
Workflow also collects and reports all of the metrics associated with the execution and completion of the process.
Check the below links u will get lot of info..
http://www.sap-press.com/product.cfm?account=&product=H950
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Go through the following links on FORK :
http://help.sap.com/saphelp_nw04/helpdata/en/24/e2283f2bbad036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/25f1e7454311d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
http://www.insightcp.com/res_23.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
For more reference on workflow: http://****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/9277a346f311d189470000e829fbbd/frameset.htm
Check these links.
http://www.sapgenie.com/workflow/index.htm
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_nw04/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
Debug a workflow.
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440
Workflow tutorials with step-by-step and with screenshots are available at
http://www.****************/Tutorials/Workflow/Workflow.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://www.sapbrain.com/TUTORIALS/TECHNICAL/WORKFLOW_tutorial.html
Regarding Work Flow
work flow scenarios.
1. applying for a leave.
2. approval process.
3. material creation process.
4. mainly work flow is for notification purpose.
chk this links
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.erpgenie.com/workflow/index.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
http://www.insightcp.com/res_23.htm
A good tutorial
http://www.thespot4sap.com/articles/Invoice_Verification_Automation_Using_SAP_Workflow.asp
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
/people/alan.rickayzen/blog
/people/jocelyn.dart/blog/2006/06/19/why-use-abap-oo-with-workflow
a good book
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-press.com/downloads/h950_preview.pdf
Check the following PDF
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
also seach the workflow forum: SAP Business Workflow
Regards
Anji

How to use Material Group in substitution rule

Hello,
Anyone experience in how to use the entry of the material group of a PO, in a substitution rule for accounting documents.
I have noticed the material number can be used within a substitution rule, and is also available in BSEG... so far have not find a solution to do this for a material group.
Please note, this is applicable for PO with no materials (ONLY a material group to use for account determination).
Many thanks,
Daan

forget about all varible in essbase CSC
it's bad practics.^^^Is it?
Essbase cube are self big array )^^^That's what makes ARRAY so cool -- you can set up an array that encompasses a dimension.
Example straight from a HBR:
ARRAY SomeArray["Entity"] ;
Regards,
Cameron Lackpour

How to use "Adjustment Level " in automatic adjustments rule

Now we are setting up BPC for legal consolidation.
we use BPC 7.0MS SP4 Version.
I want to use some result of automatic adjustment rules for source data, so I tried to use adjustment level in automatic adjustments rules.
I was setting up A rule's (to use source data) adjustment level is 0 and B rule's level is 1,
the result of SPRUNCONSO were "Error" CSD-150 and CSD-160.
Please let me know how to use adjustment level option.
Thanks.
Edited by: tae-youn.kim on Dec 14, 2009 3:20 AM

Hello :
CSD-150
Check the method between METHOD Table and your ownership Cube. Check your Rules between the RULES Table and The ELIM Table. Check The INTCo.
Regards,
SANJAY

How do we use Data rules/error table for source validation?

How do we use Data rules/error table for source validation?
We are using OWB repository 10.2.0.3.0 and OWB client 10.2.0.3.33. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
I reviewed the posting
Re: Using Data Rules
Thanks for this forum.
I want to apply data rules to source table/view and rule violated rows should go to defined error table. Here is an example.
Table ProjectA
Pro_ID Number(10)
Project_name Varchar(50)
Pro_date Date
As per above posting, I created the table in object editor, created the data rule
NAME_NOT_NULL (ie project name not null). I specified the shadow table name as ProjectA_ERR
In mapping editor, I have projectA as source. I did not find error table name and defined data rules in table properties. It is not showing up the ERR group in source table
How do we bring the defined data rules and error table into mapping?
Are there any additional steps/process?
Any idea ?
Thanks in advance.
RI

Hi,
Thanks for your reply/pointer. I reviewed the blog. It is interesting.
What is the version of OWB used in this blog?
After defining data rule/shadow table, I deployed the table via CC. It created a error table and created the all the source coulmns in alphabatical order. If I have the primary key as 1st coulmn (which does not start with 'A') in my source, it will apprear middle of of columns in error table.
How do we prevent/workaround this?
If I have source(view) in sch A, how do we create Error table in Sch B for source(view)?
Is it feasible?
I brought the error table details in mapping. Configured the data rules/error tables.
If I picked up 'MOVE TO ERROR' option, I am getting "VLD-2802 Missing delete matching criteria in table. the condition is needed because the operator contain at least one data rule with a MOVE TO ERROR action"
On condition Loading - I have 'All constraints' for matching criteria.
I changed to "no constraints' still I get the above error.
If I change to 'REPORT' option instead of 'MOVE TO ERROR' option, error goes off.
Any idea?
Thanks in advance.
RI

How to use the language's coding on the personnel calculation rule.

I want create rules for Time management, I know that it use the transaction code PE02 for writing calculation rule all the standard rules for time or payroll but I don't know how to use language wrote for the rules.
Anybody have the documents for using code on the rules.
Thanks for your help.
Regards,
Huyen Nguyen.

Hi Huyen,
Please follow this link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_REGEL.pdf
Warm Regards,
Kapil Kaushal

How to use estimation rule in MDM2.0.1

Similar Messages

Maybe you are looking for