How to use FMS on OPCH field to query value on a field in PHC1 form?

Hi All,
I have a problem. I created a user defined field in the AP Invoice form (parent form-OPCH). Now I would like to use the formatted search to add a query to that field that will select a value from another field also on the same form but at the row level (child form-PCH1). It seems that this is not possible. Any suggestions?
A general question for this: is their any way that I could use the formatted search to query value on an opening form that is inactive?
Thanks
Duc

Hi Sampath Kumar devunuri,
Thanks for your reply. It does not work. I have tried to searched through the forum about this topic and it seems that FMS will not work at row level. Not sure if there is any solution to overcome this.
My query is for example: I want my UDF on OPCH form to capture the description of the first row in PCH1:
Select $[$39.1.1]
If I assign it to a UDF at row level it works perfectly.
If I assign it to the Remark field on OPCH it still works.
But if I assign it to a UDF at title level it does not (this is what I need)
This may be because at title level the form name is OPCH which is different with the form name at row level: PCH1
I cannot think if there is any way that I could set focus on PCH1 to get the value.
Duc

Similar Messages

How to use FMS 3.5.1

Hi everyone,
Today is my first day on FMS 3.5.1.
how to use FMS?
can you help me plz?
Thanks in advance,
JaxNa

Hi,
First of all congrats to successfully setting up FMS 3.5.1 (I hope you have set it up )
I will also suggest you to upgrade 3.5.3, which is a free update or 3.5.
Now as to get started browse over Flash Media Developer Centre, particularly over the tab Getting started located at http://www.adobe.com/devnet/flashmediaserver/?view=gettingstarted
Go through all the articles here to get a feel of FMS and how it is used.
Then you can try out some cool samples at http://www.adobe.com/devnet/flashmediaserver/?view=samples to learn how real world applications are built.
Get back if you need any more info.
Thanks,
Abhishek

How to use NODIM func with out it's values being rounded

I created a new calculated key figure in Query Designer 3.x, and used the function NODIM() - Value with out dimensions. When I use this function, the values are rounding off to the nearest value.
For example, I have a value 0.000075 US$, when I use NODIM function the value is displayed as 0.000080. Value is getting rounded to nearest value.
I tried using absolute value it did not work.
Can any one tell me how to use NODIM function with out it's value being rounded to nearest value.
Thanks,

Hi,
According to your description, you might want that "Notice" field has a default value when form is created and users can be able to change the value of that
field.
As a workaround, you can add an action rule in “Name” field via InfoPath to fill the default value in “Notice” field only when “Name” field is not blank and “Notice”
field is blank.
Settings of the rule are as below, you can modify it based on your need:
Here is a link about how to add an action rule in InfoPath form, you can use it as a reference:
https://support.office.microsoft.com/en-us/article/Add-rules-for-performing-other-actions-5322d726-b787-4e5f-8d37-ba6db68b451d?CorrelationId=8a64c12f-aa60-4d90-b1f9-a44fcc4e74b5&ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support

How can we prevent a user from entering a value in Parameter Field?

how can we prevent a user from entering a value in Parameter Field and Select-options Field?

make it invisible, make it inactive, make it display only.
if the field is not there or not to be seen the user WILL have problems inputting data.
BUT once the field is there you can NOT prevent that the user fills it with data.
all you can do is on PAI check if the data the user inputted was good or bad, and clear his inputs, but you can NOT prevent him inputting something.

=SUM(IIF(Fields!OPTION_CODE.Value="M","0",Fields!COST.Value * Fields!TOTAL_UNITS.Value )) =IIF(Fields!OPTION_CODE.Value="P","0",SUM(Fields!COST.Value * Fields!TOTAL_UNITS.Value )) =SUM(IIF(Fields!OPTION_CODE.Value="M",CDbl(Fields!COST.Value * Fields

in this i want to calculate only Option code 'M' Amount in gross total.BUT MY Gross total calculating M and P Amount. option code P value should visible but not to add.
please any body help me to writing any function
=SUM(IIF(Fields!OPTION_CODE.Value="M","0",Fields!COST.Value * Fields!TOTAL_UNITS.Value ))
iam writing like below its showing error
=SUM(IIF(Fields!OPTION_CODE.Value="M","0",Fields!COST.Value * Fields!TOTAL_UNITS.Value ))
=IIF(Fields!OPTION_CODE.Value="P","0",SUM(Fields!COST.Value * Fields!TOTAL_UNITS.Value ))
=SUM(IIF(Fields!OPTION_CODE.Value="M",CDbl(Fields!COST.Value * Fields!TOTAL_UNITS.Value), CDbl(0,0)

Hi Pullela venu,
I have checked the expression and found that you have incude the string "0" in the SUM function which will cause the error, please remove the "" of the value 0 as below to have a test:
=SUM(IIF(Fields!OPTION_CODE.Value="M",0,Fields!COST.Value * Fields!TOTAL_UNITS.Value ))
=IIF(Fields!OPTION_CODE.Value="P",0,SUM(Fields!COST.Value * Fields!TOTAL_UNITS.Value ))
For the last expression as below is not correct, CDBL function format is CDBL(expression):
=SUM(IIF(Fields!OPTION_CODE.Value="M",CDbl(Fields!COST.Value * Fields!TOTAL_UNITS.Value), CDbl(0,0)
Modify as below:
=SUM(IIF(Fields!OPTION_CODE.Value="M",CDbl(Fields!COST.Value * Fields!TOTAL_UNITS.Value), CDbl(0.0) )
If the problem still exists, please provide the error message if the expression throw any error.
Any problem, please feel free to ask.
Regards
Vicky Liu

How to use P_SESSION.GET_VALUE_AS_VARCHAR2 in MDform item default Value

I have a master detail form based on two tables. In the DETAIL_BLOCK section I have an item named 'APPROVAL_STATUS' based on the column of the same name in the underlying table. I have an unassociated textbox named CURR_APPROVSTAT in the detail form for which I would like to set it's default value to the current value of APPROVAL_STATUS when the master detail form is opened in %3D mode via a hyperlink.
I have tried using the p_session.get_value_as_varchar2 in the default value field of the CURR_APPROVSTAT item, but it generates errors on run.
EX:
Item CURR_APPROVSTAT
default value field
p_session.get_value_as_varchar2(
p_block_name => 'DETAIL_BLOCK',
p_attribute_name => 'APPROVAL_STATUS')
Default Value type:
Function returns varchar2
on run, it generates error that p_session must be declared (I get the same error if I use portal.p_session... also).
default value field
select p_session.get_value_as_varchar2(p_block_name => 'DETAIL_BLOCK', p_attribute_name => 'APPROVAL_STATUS')from dual
Default Value type:
SQL returns varchar2
on run, it generates and error that a right parenthesis is missing.
I have also tried using the following in the Additional PL/SQL - before displaying form:
p_session.set_value
(p_block_name => 'DETAIL_BLOCK'
,p_attribute_name => 'CURR_APPROVSTAT'
,p_value => p_session.get_value_as_varchar2(
p_block_name => 'DETAIL_BLOCK',
p_attribute_name => 'APPROVAL_STATUS')
on run, this generates the error identifier 'P_SESSION.GET_VALUE_AS_VARCHAR2' must be declared
My questions are:
1) is it possible to use the p_session.get_value_as_varchar2 in the default value field?
2) If yes, then what if the proper syntax
3) If no, can I set this value when the MD form opens from the additional pl/sql triggers, and if so, what is the syntax?
any assistance you can offer is greatly appreciated.
Sincerely,
ARM

In my detail block I have 10 rows displaying that may or may not have data after querying. To set the default value in the detail block, you have to set the index value of p_session.set_value. Since I don't know how many rows are already populated, I'm setting the default value to all 10 rows. Is there a better approach?
Here's my code example, which I've placed in the additional PL/SQL section before displaying the form...
DECLARE
l_district_id VARCHAR2(7);
BEGIN
l_district_id := p_session.get_value_as_varchar2
(p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'A_DISTRICT_ID');
FOR i in 1 .. 10 LOOP
p_session.set_value
(p_block_name => 'DETAIL_BLOCK',
p_attribute_name => 'A_DISTRICT_ID',
p_value => TO_CHAR(l_district_id), p_index => i);
END LOOP;
END;

How to Use separate web template to a query, when default one is configured

Hi,
A default template is configured in SPRO. and all the queries display data using this template. Now I want to display a particular query result in a separed template that is customised to suit the need.
how can I achieve it? When I customise template and attach query to it, it displays the result in this template, when executed from WAD. If I execute from Bex, The result is automatically displayed in the default template mensioned in SPRO.
Please advise.

If you want this template to be attached to this query alone - then you will have to have the same as a separate iView on portal.. when you execute from BEx the default template will get executed and by changing the default template all the queries will start using the default template... it is not possible for you to specify the template to be used when executing queries from BEx Query designer..

How to expand rows in a table by calculated value of a field

Hi,
I'm trying to set the rows of an expandable table to follow the calculated value of a field.
The calculated field comes from two date fields that calculate the number of days and I want my table/row to expand based on that number..
Is is possible? Right now I have a button that does add an instance "Admin_Use.Table3._Row1.addInstance(1);" but I want it to be triggered by the calculated field instead...
Thank you so much!!!!

Hi Niall,
Thank you for your reply. I'm still a bit puzzled as right now I have this code in my calculate field (see below) under the calculated event and I'm not sure how to insert the code you sent me as I keep getting syntax errors. Any help will be greatly appreciated!!!
if (HasValue(Nights.FirstNight) & HasValue(Nights.LastNight) ) then
    if (Date2Num(Nights.LastNight, "YYYY-MM-DD", "en_IE") >= Date2Num(Nights.FirstNight, "YYYY-MM-DD", "en_IE")) then
        $ = Date2Num(Nights.LastNight, "YYYY-MM-DD", "en_IE") - Date2Num(Nights.FirstNight, "YYYY-MM-DD", "en_IE") + 1
else
        xfa.host.messageBox ("The first night cannot be after the last night", "Nights Covered", 0)
        Nights.LastNight.rawValue = null
endif
else
endif

How to Use the Procedures in a Sql Query

Hi Friends,
Can anyone help me out whether can we use the procedure in the sql query..
if yes help me out with an example
my requirement is
i have one sql query .. in which i need to use the procedure which returns multiple values... how can i overcome it,can anyone help me out for this..
for your reference i am pasting the sql query
SELECT paf.person_id
FROM per_all_assignments_f paf START WITH paf.person_id = p_person_id
AND paf.primary_flag = 'Y'
AND paf.assignment_type IN('E', 'C')
AND l_effective_date BETWEEN paf.effective_start_date
AND paf.effective_end_date
CONNECT BY PRIOR paf.supervisor_id = paf.person_id
AND paf.primary_flag = 'Y'
AND paf.assignment_type IN('E', 'C')
AND l_effective_date BETWEEN paf.effective_start_date
AND paf.effective_end_date
and paf.person_id not in (>>>I HAVE TO USE THE PROCEDURE HERE<<<<);
Thanks in advance

We never saw your procedure, but maybe you could wrap it in a function
SQL> create or replace procedure get_members(in_something IN number, out_members OUT sys_refcursor)
is
begin
open out_members for
    'select level member_id from dual connect by level <= :num' using in_something;
end get_members;
Procedure created.
SQL> create or replace type numbers as table of number;
Type created.
SQL> create or replace function members(in_something IN number)
return numbers
as
member_cur sys_refcursor;
members numbers;
begin
get_members(in_something, member_cur);
fetch member_cur bulk collect into members;
close member_cur;
return members;
end;
Function created.
SQL> select * from table(members(4));
COLUMN_VALUE
           1
           2
           3
           4
4 rows selected.Variant on same using piplined function
SQL> create or replace function members_piped(in_something IN number)
return numbers pipelined
as
member_cur sys_refcursor;
rec number;
begin
get_members(in_something, member_cur);
loop
     fetch member_cur into rec;
     exit when member_cur%notfound;
     pipe row(rec);
end loop;
close member_cur;
return;
end;
Function created.
SQL> select * from table(members_piped(4));
COLUMN_VALUE
           1
           2
           3
           4
4 rows selected.
SQL> drop function members_piped;
Function dropped.
SQL> drop function members;
Function dropped.
SQL> drop type numbers;
Type dropped.
SQL> drop procedure get_members;
Procedure droppedEdit:
Sorry Blu, had not seen you already posted similar thing
Edited by: Peter on Jan 27, 2011 5:38 AM

How to use bind variables in the following query

CREATE OR REPLACE PROCEDURE MMDB.test IS
sel_qtn VARCHAR2 (10);
CURSOR PT_QUANTITY IS select * from mmdb.product_tree WHERE QUANTITY_CHECK ='E'
AND run_id = 100
a PT_QUANTITY%ROWTYPE;
BEGIN
FOR i IN PT_QUANTITY
loop
sel_qtn := i.quanttity-1;
While sel_qtn>=1
loop
insert into mmdb.product_tree (BILLING_ACCOUNT_NO ,S_CODE) values (i.BILLING_ACCOUNT_NO ,i.S_CODE||'E');
sel_qtn :=sel_qtn -1;
End loop;
commit;
end;

Don't duplicate threads: How to use bind variables in the following query

How to use ABAP Class to modify Web Query Result ??

Hi all !
We are using Web Templates to display our Query.
What I would like to do ( and seems a really important issue for our users! ) is to have a "PAGE BREAK" everytime the value of a charateristics change in the report
For Example :
-Page 1-
Division     Project
   A               1
                    2
                    3
-Page 2-
Division     Project
   B               1
                    2
                    3
and so on....
I read threads about using ABAP CLASS but no example what so ever...
We are presently under BW 3.1 but are considering upgrading to 7.0 by the end of the year so if there is a solution to my problem on either version i'd like to know.
If anyone has any information about how I can do this it would be most appreciated
Thx
JB.

Hi Yong,
Ravi is right, first check the blogs by Jocelyn, and if you still have specific questions you can ask them. I have used ABAP classes in workflow and I know Mike Pokraka tries to use classes exclusively.
Regards,
Martin

How to display f4 help for a field based on value of another field

Hello All,
I have 4 fields : Sales Org : VBAK-VKORG, Distrib Channel : RV50A-VTWEG, Div : RV50A-SPART, Sold-to-party : KUAGV-KUNNR.
The second field depends on the first one, the third on the second one and the fourth on the first field.
However, when each of the second third and fourth fields' f4 help is displayed, the values are independent of the previous fields. How do I set the f4 help to display values based on the respective fields?
Regards,
Mithun

Please be sure that you are searching the forums before posting. This exact same question was asked just yesterday:
F4 help to input field
In particular study the section and the linked help document for ddic search helps export/importing parameters and the requirements for DDic Structure/table usage for the parameter mapping.

How to use MAX function in SSAS MDX Query

I want to run this Query with MAX Condition on LAST_DATA_UPDATE Column .

Hi Ashishsingh,
According to your description, you want to know how to use MAX function in SQL Server Analysis Services MDX Query, right? In this case, please refer to the link below which describe the syntax and sample of MDX function.
http://technet.microsoft.com/en-us/library/ms145601.aspx
http://www.mdxpert.com/Functions/MDXFunction.aspx?f=64
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

How to use "Order by" clause dynamically on LOV values in 10g r2 forms

Hi ,
I have following requirement,please guide me.
1 Create a List Of Values with 2 fields, Code and Description
2. Do not use order by clause in record Group Query
3. Attach this LOV to a field in Form
4. When user invokes the LOV user will see two fields in LOV with header as Code and Description
5. Now when user clicks on Column Header “Code” then LOV should be sorted on Code
6. And if User clicks on Column Header “Description” then LOV should be sorted on Description
Thanks in Advance.

Kindly post this problem in this forum ->
[Forms Forum|http://forums.oracle.com/forums/forum.jspa?forumID=82]
And, close this thread by marked it as answered. ;)
Regards.
Satyaki De.

Populate f4 values of a field based on value of other field

Hi,
I have created select options using WDR_SELECT_OPTIONS.For one of the fields ,f4 values should be based on value of another field in the screen.
How will i achceive this requirement.
I got a link about the same but that is not using WDR_SELECT_OPTIONS
http://www.sdn.sap.com/irj/scn/logon?redirect=/irj/scn/wiki?path=/display/WDABAP/Using%20Search%20help%20attachments%20for%20WebDynpro%20ABAP
I got another link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/606288d6-04c6-2c10-b5ae-a240304c88ea?quicklink=index&overridelayout=true
which I am going to try
Thanks
Bala Duvvuri
Edited by: Bala Duvvuri on Jun 22, 2011 6:49 AM

Hi,
Using OVS you can achieve this., In OVS Event Handler read the value based on which you want to display F4 for other field and populate the values based on the first field.
this link is fine., go through this: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/606288d6-04c6-2c10-b5ae-a240304c88ea?quicklink=index&overridelayout=true
hope this helps u.,
Thanks & Regards,
Kiran

How to use FMS on OPCH field to query value on a field in PHC1 form?

Similar Messages

Maybe you are looking for