Posting custom headers in B2B via ESB

Hi All,
I am dequeue a payload from IP_IN_QUEUE using AQ Adaptor(ESB) and using Transformation and routing service of ESB(XSLT), I populate few headers and enqueue to IP_OUT_QUEUE. I am successfully able to populate FROM_PARTY,TO_PARTY, etc in the headers.
My question now is, how do I populate custom header attributes??? Is it possible... How this will do in EDI X12 and EDIFACT messages???
The TO_PARTY I populate in header goes as AS2-Identifier... similarly how the custom header attributes will go???
Regards,
Praveen

Hi Praveen,
As far as I know, B2B passes all headers which it receives from the back-end. For few mapping is system defined, so they get mapped but additional headers will get passed as it is.
You may like to refer-
AQ Header - B2B IP IN QUEUE
Re: AQ-Header parameters/ IP_MESSAGE_TYPE parameters
Custom AQ - Dequeue is not happening
[Urgent]How to assign Payload in Payload Header.
Regards,
Anuj

Similar Messages

Custom Headers with LrHttp.post?

I am using custom HTTP headers in my application and this works
great with LrHttp.get. However, LR doesn't send anything when I try to do this with LrHttp.post.
My code looks like the following:
            local customHdrs = {
                { field="XXX", value="yyy" }
            local data, hdrs = LrHttp.get(url, customHdrs)
            data, hdrs = LrHttp.post(url, xxx, customHdrs)
Any ideas? Has anyone used custom HTTP headers with post before?
Thanks!

Hi,
I've used standard headers with LrHttp.postMultipart, but not custom headers with LrHttp.post. Could you try using LrHttp.postMultipart instead to see if it has any more luck for you than LrHttp.post?
Also have you tried using something like Fiddler2 to intercept the HTTP traffic and confirm whether or not the headers were sent with the request?
Matt

Custom Headers Sent via UrlLoader?

Hi all,
Why you need to actually send some data in order for UrlLoader to send custom request headers.
For example this code is working:
var ul:URLLoader = new URLLoader();
                    var urlRequest:URLRequest = new URLRequest();
                    ul.addEventListener( Event.COMPLETE, onComplete );
                    //urlRequest.contentType = 'application/x-www-form-urlencoded';
                    var uv:URLVariables = new URLVariables();                                    uv.z = 'g';
                    urlRequest.requestHeaders.push( new URLRequestHeader('TestHeader', '754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628=754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628') );
                    urlRequest.requestHeaders.push( new URLRequestHeader('TestHeader2', '754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628=754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628') );
                    urlRequest.requestHeaders.push( new URLRequestHeader('TestHeader3', '754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628=754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628') );
                    urlRequest.method = URLRequestMethod.POST;
                    urlRequest.data = uv;
                    urlRequest.url = 'http://localhost/customHeadersTest/customHeaderReader.php';
                    ul.load( urlRequest );
And this is not working:
var ul:URLLoader = new URLLoader();
                    var urlRequest:URLRequest = new URLRequest();
                    ul.addEventListener( Event.COMPLETE, onComplete );
                    //urlRequest.contentType = 'application/x-www-form-urlencoded';
                    var uv:URLVariables = new URLVariables();                                   //uv.z = 'g';
                    urlRequest.requestHeaders.push( new URLRequestHeader('TestHeader', '754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628=754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628') );
                    urlRequest.requestHeaders.push( new URLRequestHeader('TestHeader2', '754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628=754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628') );
                    urlRequest.requestHeaders.push( new URLRequestHeader('TestHeader3', '754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628=754d3b148df7a597947f5556cbe06628754d3b148df7a597947f5556cbe06628') );
                    urlRequest.method = URLRequestMethod.POST;
                    urlRequest.data = uv;
                    urlRequest.url = 'http://localhost/customHeadersTest/customHeaderReader.php';
                    ul.load( urlRequest );

Also custom headers don't work if method is GET. So can someone please elaborate this. Thanks

Post Customs Document via /SAPSLL/API_CUSTOMS_DOC_CREATE

Hi Gurus,
We are trying to post Customs document Via FM /SAPSLL/API_CUSTOMS_DOC_CREATE. Is there a better way to post Customs document via program/manually?
can any one provide a sample program to create/change Customs document via program?
Regards,
Abhi.

HI Abhshk Bhatta,
do you have any experience with the connection of a non sap system to sap gts?
my idea is to use to call this function module e.g. via a web-service and post the customs declaration into gts....
what do you think - may that be possible?
regards,
Ralf

How to post data to Oracle B2B's httpReceiver using SOAP UI

Hi All,
I have successfully tested an inbound EDI X12 810 transaction by creating document version, type, definition. I have used an inbound file channel in this case to
pick the file and the sender trading partner is dentified from the ISA and GS values as I have configured EDI Interchange ID and EDI Group ID at Remote trading
partner profile level. This configuration is successfully working fine.
Now my intention is to replace the inbound file channel with httpReceiver i.e. I just want to post 810 document to B2B's httpReceiver using SOAP UI instead of
using inbound file channel. For this I have mentioned Generic Identifier as Acme under the profile tab of Remote trading partner (Note that Acme is my remote
trading partner). And I am posting data to httpReceiver using SOAP UI by setting sender as Acme in the SOAP UI headers. But in the B2B reports, the transaction
is erroring out as it is unable to identify sender, doc type and agreement.
Please let me know is this the correct way of populating headers from SOAP UI? Is Sender only sufficient in the headers or any others required? Do I need to pass
IP address also as header? If so, is it my machine IP address? Is that should be static IP compulsorily?

Found an answer - hope this is what the first person was looking for.
You can embedded the Apex code within HTML with the following key steps:
1. Java scripts need to reference the correct URL paths. For example on apex.oracle.com they would be
<script src="http://apex.oracle.com/i/javascript/htmldb_html_elements.js" type="text/javascript"></script>
<script src="http://apex.oracle.com/i/javascript/htmldb_get.js" type="text/javascript"></script>
2. The <form...> tag needs to have the DAD URL in it. Such as:
<form action="http://apex.oracle.com/pls/otn/wwv_flow.accept" method="post" name="wwv_flow" id="wwvFlowForm" >
Any other references need to point to the right URLs.
Finally, the action that will occur after submission is defined by the Apex Form, so you will need to set the appropriate Branch action in the application, such as going back to the same URL currently on, etc.
Stephen

Can we pass values to custom headers through HTTP bindings in BPEL?

hi,
I have an urgent requirement where I have to pass values to custom headers of HTTP url through HTTP bindings in bPEL.
Is it possible? Say I have a http url http://localhost:80/test.
I need to post xml over the above HTTP url as well pass some values to the Custom Headers Variables.
Can I achieve this functionality thorugh BPEL or not?

Hi,
My requirement is exactly the same as yours, can you please let me know what did you do to overcome the Oracle Forms Default change password screen.
Regards,
Praveen

Is is possible to pass EDI X12 GS 02 value to B2B via BPEL?

Hello Oracle B2B Gurus,
We currently have a trading partner with 900 different group ids.
I have created a reference table from which I would like to pass the GS02 segment for B2B via a BPEL process. B2B would then consume the Group ID and forward that to the VAN.
Since the ISA sender id and reciever id is the same for all 900 group ids, I was wondering if B2B has the option of not setting a group id and consuming it via a paramater using either AQ or default?
Thanks

Does this mean that I need to add the 855 with GS headers at the Version level? Will this effect all other 4010 transactions that I have? Yes, it will affect all the 4010 transactions however if you want to use separate group or interchange ecs for a particular partner, then override the group and interchange ecs at partner level (Remote Partner Name --> Documents --> select document definition --> Override Version Param)
Or do I just create a GS group ecs file with only the GS segments and place that at the version level? If you want to use common group ECS for all the partners then upload it at the version level otherwise override it at the partner level.
Can you provide a sample of the default GS file that is currently in B2B? I can provide but it's simple to create a group and interchange ecs -
Group ECS must have only GS and GE segments.
Interchange ECS must have only ISA and IEA segments.
You may create a transaction set ecs with envelope parameters and delete all the segments except required one to prepare a group/interchange ecs.
Regards,
Anuj

Is list of custom headers and footers. I can't find how to change the footer to print the Long Date

'''There should be a list of custom headers and footers.''' I can't find how to change the footer to print the '''Long Date'''. It took awhile just to find Page &PT. So I would appreciate if someone could post a list. Also if someone can answer how to print the Long Date.
Thank you

When you're on a call, use the volume buttons on the left side of the device. This will then adjust the In-Call Volume.

Remove custom background and ringtone via CUCM from IP Phone

Hallo,
we'va a CUCM 7.1 running at our company with about 700 IP Phone (7962). Now I've set via Bulk Phone Update the option "Phone Suite" to
disabled.
But in the time before several employee have personalized their phones
Is it possbile to remove the custom backgrounds and ringtone via CUCM from all phone and if yes how?
Kind kegards
Kai

No, it's not possible to do so via CUCM.
This part of CSC is for video over IP calls, please post your questions in the right section.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Error while posting Customer with Multiple sales areas using DEBMAS05.

Dear experts,
We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05. we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error: "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created! The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization). OSS Note (384462) provides further details about this. One Important point from the note is:
"As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
For your customers, contact persons exist to which a private address or a different business address is assigned.".
This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
If someone have experienced the same issue before and have found a solution to it, kindly help out.

I have found the cause and solution to this problem.
This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
This was resolved by splitting the IDOC into 2.
The solution is to First post only the KNA1 segment and create the customer.
In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”: you would have got the KUNNR after the first step.
Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC.
I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
Cheers
Venkat

Clear Withholding tax data while posting customer invoice

Gurus,
I am trying to post Customer invoice document using FB01 transaction.
If the customer has with holding tax information available in Customer Master the corresponding information is getting posted into invoice document.
Is there any user exit, enhancement or substitution available to clear this with holding tax data.
Please do share if any code examples on this issue.
Appreciate your quick response.
Thanks,
Suneel

Dear AMD008
were you maintain properly in OB40 MWS (out put tax) relevant GL Account
Note: are you using NEW GL please conform me
Regards
shankar

Firefox 3.6.9 on mac running 10.4.11 does not have option for custom headers when printing.

I am trying to print web content for a college project, it requires custom headers and footers. Firefox 3.6.9 does not have a custom option in the header/footer lists. In the help pages for Firefox is shows this option. Is this missing only on the Mac version? Thanks for any info.

See if this works.
Type '''about:config''' in the URL bar and hit enter.
Filter = '''print.print''' <br />
There are 6 prefs for headers / footers. <br />
'''print.print_header...''' center, left, & right <br />
and <br/>
'''print.print_footer...''' center, left, & right <br />
You can add what you want in the '''''Value''''' column and then Restart Firefox to effect the change. <br />

FI,Post Customer Down Payment

can any one give me the BAPI for POST CUSTOMER DOWN PAYMENT : HEADER DATA transaction F-29 and BDC program for poasting the same?

These might be of some help too :-
f-29 document header
Down payment request: posting using BAPI_ACC_DOCUMENT_POST

Bapi for 'post customer down payment (t-code F-29)'

hi all
can any one tell which bapi is used to 'post customer down payment:header data (t-code F-29)'.
thanks in advance,
lokesh

Hi,
this one :
BAPI_ACC_DOCUMENT_POST
Best regards,
Erwan

Posting Customer Invoice using FB70

Hi Experts,
While posting customer invoice (FB70) for the customer having withholding tax information defined, I am able to simulate the transaction successfully but not able to post it.I can see the TDS transaction executed.But, the post icon symbol is inactive. It displays " error messages still exist" . When i checked the error log it displayed Message number 047 in the application area F5A.
Please help me
Regards,
Sasidhar

Hi
In accounting document posting - system not shows any specific error log.
In your case, the error might be any of the below :
- check whether the balance of the all line items is zero
- check whether the WHT calculation is correct
- check whether the customer invioce amount is entered
VVR

Posting custom headers in B2B via ESB

Similar Messages

Maybe you are looking for