How to use Structure In TableView

Helo BSP Gurus,
In BAPI_PO_GETDETAIL, upon giving the PO number it outputs the Header and Item Data. Item data is a Table so I can display n BSP using tableview. But header falls under import parameter and being a Structure, How shld I display n BSP using tableview.
Regards
Leo

Hi...
  I think you are mentioning about PO_HEADER.
You can't use the Structure in Tableview.
You need to create an internal table or Table type with BAPIEKKOL and use itab in tableview.
Also you may not want to display all the fields..So use Iterator.
Raja T
Kindly close & reward the thread if your issue is resolved..
Re: Can I use a Model Internal Table Parameter in <html:inputfield>
Message was edited by:
        Raja Thangamani

Similar Messages

  • How to use Structures of Variant Configuratin in BAPI_QUOTATION_CREATEFROM2

    Can any one help me by telling How to use Structures of Variant Configuratin in BAPI_QUOTATION_CREATEFROM2
    the structures are :QUOTATION_CFGS_REF, QUOTATION_CFGS_INST, QUOTATION_CFGS_PART_OF, QUOTATION_CFGS_VALUE.
    What the necessary parameters to be passed ?
    Thanks,
    Mohan

    Ankur,
    I change the Structure Scope to B and Application SD01, but it seems conflict with the config strategy and variant matching. So, in VA21, material can't be determined by system automatically through choosing characteristics. System expands all the material of the top material. Like this:
    AA
    Aa
    aa
    ab
    Ba
    ba
    bb
    Are there some mistakes in my Item Category configuration?
    Thanks.
    Edited by: wayne wu on Jun 21, 2011 4:41 AM

  • How to use structure QUOTATION_CFGS_VALUE in BAPI_QUOTATION_CREATEFROMDATA2

    Hi All,
      I am using bapi for quotation creation BAPI_QUOTATION_CREATEFROMDATA2
    I want to know how to use structure QUOTATION_CFGS_VALUE in BAPI_QUOTATION_CREATEFROMDATA2.
    This structure is used for Variant Configuration.
    Can you please help me.
    Thanks in advance.
    Mohan kumar

    Hi
    I am also looking for same code(Create quotation using BAPI)..could you please share the code
    Thanks a lot

  • Query: how to use structure and selection and what's the difference between

    Query: how to use structure and selection and what's the difference between these two?
    Would be appreciated if some experts here give examples to demenstrate on how to use structure and selection in query and what's the difference between these two?
    Thanks in advance!

    Hi Kevin,
    1. Well by default all the KF that you include in your query go into a Key Figure Structure. You can additionally have another structure for defining how your chars are laid out. A common example is a Calmonth structure where you have selections for 12 months, quarers and YTD values. This would be a char structure with different selections (for each month, qtr etc)
    2. Yes, a selection with a KF is the same as restricting a KF. You can use am RKF is you have one on the left hand side, or if you need to do this locally in the query, right click the structure and choose New Selection, then proceed to choose your KF and reqd char values.
    Hope this helps...

  • Explain How to use Structure mapping button

    Hi All
    Iam Developing an application "Implementing and Using Exceptions in Guided Procedures"
    Can you please explain How to use Structure mapping button,
    Plz give me steps in details
    Thanks
    Srinivas

    Hi
    Create a project using 0020 as method.
    Max

  • How to use structure in ABAP program

    I developing a report in smartforms but i want some fields to be display on the report but unable to find the relvent table as the field is show in structure.i can not find the actual table . is there any specfic way to find the table .or is there any way to use the fields defind in structure in my ABAP program.

    Hi,
      May be iam not clear with the question. But why you want to use structure. In report you can define your own structure, also you can declare your fields directly using standard datatypes.
    Hope this will help!!!
    Amol

  • How to use structure pointer with « Call Library Function node » in LabVIEW

    I use GetTimeZoneInformation from kernel32.dll. It definition is :
    DWORD GetTimeZoneInformation( LPTIME_ZONE_INFORMATION lpTimeZoneInformation );
    Where
    lpTimeZoneInformation
    [out] Pointer to a TIME_ZONE_INFORMATION structure to receive the current time-zone parameters.
    http://msdn.microsoft.com/library/default.asp?url=​/library/en-us/sysinfo/base/gettimezoneinformation​...
    I don't know how to set this parameter with my cluster based on the TIME_ZONE_INFORMATION structure.
    Your help will be appreciate
    Thanks
    INKSPEC

    INKSPEC wrote:
    I use GetTimeZoneInformation from kernel32.dll. It definition is :
    DWORD GetTimeZoneInformation( LPTIME_ZONE_INFORMATION lpTimeZoneInformation );
    Where
    lpTimeZoneInformation
    [out] Pointer to a TIME_ZONE_INFORMATION structure to receive the current time-zone parameters.
    http://msdn.microsoft.com/library/default.asp?url=​/library/en-us/sysinfo/base/gettimezoneinformation​...
    I don't know how to set this parameter with my cluster based on the TIME_ZONE_INFORMATION structure.
    Your help will be appreciate
    Thanks
    INKSPEC
    If creating a wrapper DLL which does the conversion for you is not an option (I think it won't since that would require C programming and if you knew C programming you wouldn't ask this here) then you will have to create a byte array of appropriate length and just configure the Call Library Node to pass this array as an Array of unsigned bytes and as C pointer.
    On return you will have to copy out the interesting data at the right position.
    First the length of this structure would be:
    typedef struct _TIME_ZONE_INFORMATION {
    LONG Bias; 4
    WCHAR StandardName[32]; 32 * 2
    SYSTEMTIME StandardDate; 8 * 2
    LONG StandardBias; 4
    WCHAR DaylightName[32]; 32 * 2
    SYSTEMTIME DaylightDate; 8 * 2
    LONG DaylightBias; 4
    } TIME_ZONE_INFORMATION
    Total 172 bytes
    Now the fun part will be to actually get out the information. There are a number of difficulties.
    First the strings are 16 bit Unicode so if you are interested in them you will have to call a different Windows API function WideCharToMultiByte function to convert the 16bit Unicode string into an ASCII string. For this part there has been a post here:
    http://forums.ni.com/ni/board/message?board.id=170​&message.id=123821&requireLogin=False
    For the LONG values you would pick 4 bytes at the appropriate offset from the array through the Array Subset function and then typecast it into an int32 and pass that through the Swap Bytes and Swap Words functions to reverse the LabVIEW Big Endian byte swapping in the Typecast function.
    The SYSTEMTIME is a structure with eight 2 byte integers so it would be best to use Array Subset again to extract 16 bytes at the correct offset, typecast this into a cluster with eight int16 numerics and pass it through Swap Bytes too.
    You see accessing such API functions in LabVIEW directly can get easily quite a mess and that is the reason why creating a wrapper DLL to convert properly between LabVIEW datatypes and C datatypes gets soon the easier solution if you need to interface with more than one or two functions taking such complicated data structures.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • How to use Structure in a ABAP Report

    Dear Sir,
    We are rqeuired to read the data from a Structure "RMCP3" . Please guide us  as how can we read the Data from Strcture using a SELECT statement and Where clause .
    It will be a great please .
    Regards
    B Mittal

    Hi
    Structures are Data Dictionary objects and they are not related to underlying database. So there is no data in a structure, They Have adta only During the Run time.
    Data: begin of itab occurs 0.
    Include structure  <Structure Name>
    Data: end of itab.
    Reward If Helpfull,
    Naresh.

  • How to use For-Each Structure with Multiple node XML structure

    Hi,
      How to use for-each (BPEL 2.0) construct for Multinode XML structure.
    Here is the easy case: I have list of suppliers specified by supplier
    <supplierList>
    <supplier>1</supplier>
    <supplier>2</supplier>
    <supplier>3</supplier>
    </supplierList>
    Now there is a web service http://hostname/getsupplierdetails/wsdl which accepts one supplier at a time.
    like
    <supplier>1</supplier>
    reponse object is
    <message> notfound/found </message>
    But how can I use for each of XML node to call this service and collect the result like
    <supplierList1>
         <Suppinfo>
            <supplier>1</supplier>
            <message> not found</message>
    </suppinfo>
        <suppinfo>
            <supplier>1</supplier>
            <message> not found</message>
    </suppinfo>
    </supplierlist1>
    Thanks

    For looping you use foreach loop and , loop for the number of occurences and when constructing response, adding a new element you have to use bpelx:append.  Good sample at Enterprise Integration: Oracle SOA Suite 11g: Populating a list or an array in BPEL without using XSLT.

  • How to use the structure in the EXIT_SAPMM06E_013 function module

    Hello Experts,
    Please guide me how to use the structure defined in function modules under  table tab in the driver program for smart form to fetch the data. Please post some sample code if available.
    Best Regards,
    Sandesh.Sreyamsh

    Can you please elaborate little bit more what is the actual requirement?

  • How to use File Adapter with hierarchial Structure?

    Hi,
    How to use File Adapter with hierarchial Structure like..
    Data:
    --Header Details:
    Line Item Details:
    Data
    Bcoz I am getting a Flatfile in a hierarchial way as shown below.
    Header Details :1
    Line Item a
    Line Item b
    Header Details :2
    Line Item c
    Line Item d
    Kishore

    Hey Kishore,
    In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
    check the link for the needed configuration paramters.
    If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
    If you have any question i'll be more than happy to assist.
    Nimrod Gisis

  • How to create a hierarchy in Regional Structure and how to use it

    Hi,
    Please guide me how to create a Political Region Structure hierarchy and how to use it.
    Thanks and Regards

    Hi,
    Thanks for reply please.
    I request you to please copy paste all the possible information here. It will be a great help.
    I hope you understand why we can not provide our id on this forum.
    Please guide.
    Thanks and Regards
    Edited by: MP Vashishth on May 18, 2009 7:14 AM

  • How to use "Reference Structure" setting in analysis grid item

    Hello expert,
            in Bex analyzer, how to use "Reference Structure" setting in analysis grid item by example?
    Many thanks,

    The variable needs assigned a value, that's why you're getting prompted. When you execute the statement, it's not executing the variable and exec lines.
    Having script output available in a grid would be an enhancement request.

  • How to use content conversion for Complex structure

    Hi All,
    I want to know how to use content conversion for the following complex structure:
    Data               
    ...Details            1 to Unbound
    .....Header           1 to 1
    .......HF1
    .......HF2
    .......HF3
    .......ITEM           1 to unbound
    .........ITF1
    .........ITF2
    all are of type string.
    Thanks & Regards,
    Viswanath
    Message was edited by: Viswanath Mente

    Hi,
    In the content conversion,
    give ur
    1.document name as message type
    2.give ur recordstructure as Details,,Header,1,ITEM,
    3.mention ur keyfield.
    conversion parameter
    Header.fieldFixedLength - give the field lengths
    Header.fieldNames=mention all the field name
    Header.keyField=enter the value of keyfield
    Header.endSeparator='nl'
    repeat the same  for Item
    regards
    jithesh

  • How to use shift register in this structure?

    Dear All,
    In order to use less variety of graph, I want to use shift register to manage and send data to graph.
    But there is not only event structure in my vi, for some reason(because I want to use only one button to control running and stop, and this must do through variety of button, I can't put this loop into the event structure) I must use other while loops, I don't know how to use shift register in this structure.
    Please tell me anything helpful.
    Thank you!
    Attachments:
    shift register.vi ‏26 KB

    hi there
    there are a lot of solutions. my favorite one is the usage of a so called "FGV" (functional global variable). this allows you to strore, manipulate and transport data through your app with a minimum of wires. see attachment.. (other users may have other favorite solutions...)
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"
    Attachments:
    Shift Register 7.1.zip ‏20 KB

Maybe you are looking for