How to User Purge Recyble bin as System

Hi all,
I want to purge scott's recycle bin as user "SYSTEM". Because I do not know the user's password. How do I achieve it?
SQL> purge scott.recycle bin;
purge scott.recycle bin
ERROR at line 1:
ORA-38302: invalid PURGE option
Thanks a lot,
Kinz

KinsaKaUy? wrote:
You mean that you want to purge Scott's recyclebin being System? The user Scott would be able to purge its own recyclebin isn't it? Yes but they it is not of their concern to maintain it.
I tried "purge dba_recyclebin" as system but I got "insuficient privilege error" as I need to be SYSDBA. I only allowed to login as SYSTEM and I know this has "dba" privilege.
Any other uptions?
What is this purge tablespace users scott?This would drop only that user(Scott in this case) objects from the mentioned tablespace. If you can't use this, method suggested by Fran would be the way to go.
Aman....

Similar Messages

HOw to find how many users into into r/3 system and when the log in

HI
I need to find who are others log in to R/3 system?
HOw to find how many users into into r/3 system and when the log in

Hi,
You can also use transaction code AL08 to see the list of users logged on with the transactions they are working on.
Regards,
Venkat

How to check how many users is using SAP B1 system

Hi, there
I need know whether there are users are using SAP B1,
if no user is using then can change Master data, oterwise can not change.
Who knows the method, thanks for your share.
Many thanks!
Lanjun Wang

Hi Lanjun,
You question is very confusing. What do you meant by System SAP B1. Is it a R3 System, BW System, CRM System , EP 6.0 System?
Thanks,
Praveen

How to know how many user log in days ago

Hi,
how can i know how many users were logged into a system last sunday?
thanks

Try going to tcode se16 enter table USR02.
Click on setttings
Click format list
Click choose fields
Click deselect all
Then choose the follow fields:
<b>Field Name                           Field Label</b>
MANDT                                 Client
BNAME                                 User
USTYP                                 User Type
TRDAT                                Last Logon Date
LTIME                                 Last Logon Time
click on save/copy
Then enter the date you are looking for in the Last logon date.
Hope this is what youare looking for..
HB

How many Users Logged in ?

Hi,
I have a peculier requirement. I need to know, how many users logged in, when the system crashed. This is needed before restoring the system. Is there anyway from Unix level, this info can be captured?
This we need for deciding, if system crashed notification to be sent or whom to send.
Thanks,
Raj

Hi,
Why do you need the users? You just restore and then put a message in SM02 when ever the users logins message will be shown.
Regards,
Vamshi.

How to conf in Hyperion, so the system couldn't login with the same user

Hai.....
how to configure in Hyperion, so the system couldn't login with the same user id in different machine ? (could you please provide me with detail step by step ? )
rgds
uka fp

fane_j wrote:
Sally R. wrote:
Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
This was published on MacWorld's site, and it's not a very good tip. Try this instead
ls -la /Users/Shared/*.so
Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
By bastion
Fri Feb 24 08:49:05 PST 2012
PeterSParker said
Your terminal statement has an extra "." in it that prevents it from working.
Also, you should add the options -alR to show what is happening, and to search subdirectories.
The revised command looks like this:
ls -alR /Users/Shared/*.so
The above is completely wrong. The command as shown in the article is appropriate.
The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
Because you're explicitly searching for things that start with "." you don't need the -a flag.
Because you only care about simple existence and not any metadata you don't need -l.
Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

How to get the list of roles assigned to a user in all the child systems

how to get the list of roles assigned to a user in all the child systems from CUA SYSTEM

Try transaction SUIM in your CUA system. Go to user, cross-system information, users by roles. If you run it wide open, you'll get all users and all roles assigned for all systems managed in your CUA.
Krysta

How to get user status in place of system status - B2C

Hi,
In our requirement for B2C webshop, we need to replace the user stattus with the system status . In the standard B2C webshop, , we have only OPEN and COMPLETED orders, which related to system status - OPEN and COMPLETED.
I want to get user status in place of system status.
Please help me how to proceed with the things.
Regards
Yaswanth.K

Done using Custom RFC and jsp modifications!

How to fetch service order with partucular system status and user status

Hello All,
How to fetch service orders with specific system status and user status.
thanks

I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
I want to fetch released service orders with status INIT and RENT.
Here, SYSTEM Status = Released and
USER Status = INIT
RENT
So is there any function module available for the same.....

Dear apple support communities, how can i fix this problem? /users/ocha/.bashrc/bin:??

dear apple support communities, how can i fix this problem?
/users/ocha/.bashrc/bin:??
i have change the directory after i install GMT 5
but i was wrong and that are the result,.
please help me

or could you please tell me how to see if i have a back up? and how i can restore it?
If you do not know whether you have a backup or not, then you DO NOT have a backup. I'm assuming you have not been running Time Machine, nor any other backup utility.
and then i dont know what to write to get me into the right directory
Shell initialization files (.bash_profile, .bashrc, etc...) go in your home folder. The environment variable $HOME contains the path to your home folder. The commands I gave you will edit the file in the correct directory.
but i'm still new
Everyone has to start somewhere.
To give any editing advice, we need to know what you "REALLY" want to accomplish, especially if you have little or no command line knowledge.
Why are you in the Terminal in the first place?
Why are you trying to edit .bash_profile and/or .bashrc?
What do you hope to accomplish when everything is done?
If you are following someone else's instructions, what are they? Post them here, or give a simple pointer (and by simple, I mean we are volunteers, so we do not want to spend hours digging in some web site to find the instructions, so make our job easy, so we can make it easy for you).

How to find the user who never logon R3 system since system golive.

Hi everyone,
Our R3 system golive on 2005.Due to some reasons,we need to find out the users who never logon R3 system since system go live and want to delete it.Those large numbers of unvalued users has been created because of imprecise estimation before golive.So for now,we willing to remove those users by using some kind of method.and you know,the number of unvalued user are immense,so it's impossible to identify this kind of user by using T-code su01 one by one.
Thanks in advance.

Hi rong,
Run report RSUSR006. One of the criterias is "Users with Initial Password"
That should answer your question.
Regards
Juan

How to map Portal User groups to a MDM System?

Hi,
Have anyone tried mapping portal user group to a MDM System?
The idea is to avoid each user to do user mapping for MDM of their own.
When i look into the usermapping section of a portal user group, it shows me a message -
"There are no systems available for user mapping for the selected principal"
Thanks and best regards,
Arun prabhu S

Hi All,
Got it!
1. Create portal users,
2. Create a portal user group,
3. Assign Users to User group,
4. Go to System Administration, edit permission of the MDM system, add the user group to the MDM system permission list and save
5. Go to User Management, modify the user grooup, go to the User mapping of the user group and do mapping for MDM system and user group using a valid MDM User name and password and Save
6. In User Management, modify the Portal role for MDM , add the user group to the role and save
7. Edit permission of the role object, add the user group to the permission list and save
Result:
All the users assigned to the user group will be able to access MDM information on the portal correspond to the MDM mapping done at the user group level. This avoids self user mapping in personalization link.
Best regards,
Arun prabhu S

How to fetch the current login user name at the BI system

Hi,
In our scenerio we need a query to fetch the current login user name at the BI system. Would you please suggest the possibilities?
Thanks and regards,
Pradip

Hi,
The current login id will be available in text elements of query.
Regards
Akhan

How do I clone a fully operational system that relies on Windows 7 for the underlying operating system?

I'm a retired IT professional desiring to assist a friend who owns a small business who recently experienced very malicious attacks on her computers from unknown parties operating anonymously on the Internet. Because
of her lack of preparation for such events, her future ability to continue to conduct her business was seriously threatened. The incident revealed, to my friend, the need to be prepared to deal with spontaneously occurring problems that create suspicious conditions
that arise with modern computer software before they can be analyzed in a sufficiently comprehensive manner to have an opinion regarding the appropriate course of action for obtaining a permanent remedy. In that, the ability to quickly react on the basis of
only suspicion is the goal.
I want to recommend an approach that involves maintaining an offline image of an operational system that is capable of running any of her computers. This image needs to include all of the software required to run
her business. In that, it is not limited to the operating system. This single image could then be used to restore any computer to a known reliable state should the need arise. This technique will also insure that each computer has sufficiently similar capability
to allow them to substitute for each other. Insofar as image restoration is itself an operation susceptible to causing unacceptable business delay I'm also recommending that each of the identical computers (i.e., from a hardware perspective) operate in a multi-boot
environment where a virtually offline backup can be instantiated via a simple reboot (i.e., an operation that all users of the Windows operating systems turn to when strange behavior is first observed). My intention is to limit the cloned system (i.e., partition
or C: drive) to the operational software. The business data along with storage for temporary data will be isolated on other partitions (i.e, mounted with other drive letters) accessible by each instance of the software eligible for multi-boot operation.
This kind of operation is something that I know how to setup on older versions of the Windows operating system. However, Microsoft has now dropped support for all of those operating systems and my much more limited
experience with the currently supported operating systems reveals that changes to the boot process will necessitate making changes to the specific preparations needed to build such an environment.
Before recommending that my friend replace all of her computers with new ones, that includes paying for new operating system (i.e., Windows) licenses, I need some assurance that the new operating systems are as
good as the old ones in this respect. These need to be relatively inexpensive desktop computers and we're only talking about a few of them. Let's say fewer than half a dozen. My friend is a sole proprietor and even though her business has become completely
dependent on what was once called personal computers she must operate on a fairly tight budget. This especially includes the budget for technology.
The articles I've been able to find on the Microsoft support websites seem to treat multi-boot as a situation where someone is running different versions of possibly difference operating systems whereas my need
to produce a single image that will both run on multiple computers as well as multiple partitions on the same computer. I'd appreciate finding some technical advice that applies to building such a system using a supported version of Windows.

I tried the image creation/restoration described by Jared. I don't think it makes much sense to rely on an operational system to do such a restoration therefore I opted for method 3 which involves using a "System Repair Disk". My first
reaction is what a crude tool. The image creation process had no trouble putting the image on a simple network share. However, it appeared as though the restoration couldn't even connect with the device. I then copied the files to a USB drive.
In this case the repair disk said it couldn't find the files even though they were there. It offered no mechanism to even look and see what was there. It appears as though it will only find the image if it is located in a folder by the certain
name used on creation and it is in root directory. Not very handy.
As ugly as all that was when we finally come to the point of making the restore it looks like the only option is to restore the entire disk, which in my case would mean also restoring both the windows partition and the recovery partition. This just
isn't what I want to do. It is also something I wouldn't even consider doing unless it was the only possible way to recover from a failed hard drive.
In summary, unless I've completely failed to notice how it works that just isn't going to work.
I hope there is something better than this. What about WinPE and ImageX?
Absent anything useful from Microsoft it will be necessary to try using other software. Time to try Acronis! I guess.

Imsadmin user purge problem ??

"Hi,
I am having a prob with purging users of one particular domain .....
Though I can purge users of all other domains fine !!!
I am running ims5.2 hf 2.07
The errors I get are :
admin-serv/logs/error
====================
[22/Sep/2005:10:23:54] failure: for host host.abc.com trying to GET /msg-ms/Tasks/operation/cgi_enduser, send-cgi reports: error occurred while sending script output (IO error)
debug of imadmin purge
=======================
hostA # /iplanet/ims52/ndacli/bin/imadmin user purge -D ServiceAdmin -w PASSWORD -n domainAA.com -g 0 -d DOMAINBB.com.com -l userAA -v
[Debug]: Object = user ; task = purge
[Debug]: default domain from Properties: domainAA.com
[Debug]: NDAhost from Properties: hostA.domainAA.com
[Debug]: NDAport from Properties: 8080
[Debug]: Login: ServiceAdmin ; PASSWORD ; domainAA.com
[Debug]: Contacting : http://hostA.domainAA.com:8080/servlet/auth
[Debug]: To servlet: domain=domainAA.com&username=ServiceAdmin&password=PASSWORD&charsetenc=UTF-8
[Debug]: cookie => JSESSIONID=hostA.domainAA.com-8%253A43322881%253A77a742bb2315863;path=/
[Debug]: cookie => ssogrp1-nda45=hostA.domainAA.com-8%253A43322881%253A77a742bb2315863;domain=.domainAA.com;path=/
[Debug]: In getObjTaskArgs for: user; purge
[Debug]: Contacting : http://hostA.domainAA.com:8080/servlet/climap
[Debug]: Sending to servlet: task=purge&object=user
[Debug]: getObjTaskArgs Status: 0
[Debug]: Number of servlets: 2
[Debug]: Servlet Name: TaskManager
[Debug]: Servlet args: task=PurgeUser
[Debug]: Servlet args: objecttype=User
[Debug]: Valid Options Array: 4
l, true, *, true, true, user's uid, userkey,
d, true, , false, true, DNS domain name, domainname,
g, true, 10, false, true, grace period (days), purgegrace,
P, false, , false, true, preview only, don't purge, preview=yes,
[Debug]: Servlet Name: TaskManager
[Debug]: Servlet args: task=PurgeUser
[Debug]: Servlet args: objecttype=MailUser
[Debug]: Servlet args: strip=yes
[Debug]: Valid Options Array: 4
l, true, *, true, true, user's uid, userkey,
d, true, , false, true, DNS domain name, domainname,
g, true, 10, false, true, grace period (days), purgegrace,
P, false, , false, true, preview only, don't purge, preview=yes,
[Debug]: argVal =userAA
[Debug]: MyURLEncoder: input data = userAA
[Debug]: servCommand =task=PurgeUser&objecttype=User&userkey=userAA
[Debug]: argVal =DOMAINBB.com.com
[Debug]: MyURLEncoder: input data = DOMAINBB.com.com
[Debug]: servCommand =task=PurgeUser&objecttype=User&userkey=userAA&domainname=DOMAINBB.com%2Ecom
[Debug]: argVal =0
[Debug]: MyURLEncoder: input data = 0
[Debug]: servCommand =task=PurgeUser&objecttype=User&userkey=userAA&domainname=DOMAINBB.com%2Ecom&purgegrace=0
[Debug]: Contacting : http://hostA.domainAA.com:8080/servlet/TaskManager
[Debug]: To servlet: task=PurgeUser&objecttype=User&userkey=userAA&domainname=DOMAINBB.com%2Ecom&purgegrace=0
[Debug]: RECV: 1
[Debug]: RECV: [email protected]: purging user...
[Debug]: RECV: [email protected]: purge user failed:
[Debug]: RECV: Failed: unable to parse CGI response: {<HTML><HEAD><TITLE>OK</TITLE></HEAD>
[Debug]: RECV: <BODY><H1>OK</H1>
[Debug]: RECV: An error has occurred.
[Debug]: RECV: </BODY></HTML>
[email protected]: purging user...
[email protected]: purge user failed:
Failed: unable to parse CGI response: {<HTML><HEAD><TITLE>OK</TITLE></HEAD>
<BODY><H1>OK</H1>
An error has occurred.
</BODY></HTML>
[Debug]: Contacting : http://hostA.domainAA.com:8080/servlet/logout
[Debug]: Logout ...
[Debug]: RECV: <html>
[Debug]: RECV: <head>
[Debug]: RECV: <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=UTF-8">
[Debug]: RECV: <META HTTP-EQUIV="Content-Language" CONTENT="en">
[Debug]: RECV: <script>
[Debug]: RECV: if(navigator.appName.indexOf("Microsoft") != -1) {
[Debug]: RECV: document.write('<META HTTP-EQUIV="Expires" CONTENT="Tue, 20 Jul 1971 00:00:00 GMT">');
[Debug]: RECV: }
[Debug]: RECV: </script>
[Debug]: RECV: <title>iPlanet Delegated Administrator</title>
[Debug]: RECV:
[Debug]: RECV: <script language="JavaScript">
[Debug]: RECV: function closeWindow() {
[Debug]: RECV: if (window.name != "") {
[Debug]: RECV: window.name = "";
[Debug]: RECV: }
[Debug]: RECV: window.close();
[Debug]: RECV: }
[Debug]: RECV: function backToStart() {
[Debug]: RECV: window.top.location = "/nda/default/en/start.htm";
[Debug]: RECV: }
[Debug]: RECV: </script>
[Debug]: RECV: </head>
[Debug]: RECV:
[Debug]: RECV: <body bgcolor="#cccccc" link="#666699" vlink="#666699" alink="#333399">
[Debug]: RECV: <table border="0" width="100%" cellspacing="0" cellpadding="0">
[Debug]: RECV: <tr><td align="center"><p> </p><table border="0" width="300" cellspacing="0" cellpadding="1" bgcolor="black">
[Debug]: RECV: <tr><td><table border="0" width="100%" cellspacing="0" cellpadding="0" bgcolor="white">
[Debug]: RECV: <tr><td><table border="0" width="400" cellspacing="10" cellpadding="0">
[Debug]: RECV: <tr><td valign="top"><img src="/nda/default/en/images/messagel.gif" width="32" height="32"></td>
[Debug]: RECV: <td valign="top"><font face="PrimaSans BT, Verdana, sans-serif" size="-1">
[Debug]: RECV: You are now logged out.<p>
[Debug]: RECV: Please close your web browser now!<p>
[Debug]: RECV: The information you have just seen remains in your Web
[Debug]: RECV: browser's memory until you close the browser.
[Debug]: RECV: <form>
[Debug]: RECV: <input type=button value="Close Browser" onClick="closeWindow()">
[Debug]: RECV: <input type=button value="Back To Start Page" onClick="backToStart()">
[Debug]: RECV: </font></td></tr>
[Debug]: RECV: </form>
[Debug]: RECV: </td></tr></table>
[Debug]: RECV: </td></tr></table>
[Debug]: RECV: </td></tr></table>
[Debug]: RECV: </td></tr></table>
[Debug]: RECV: </form>
[Debug]: RECV: </body>
[Debug]: RECV: </html>
access log
===============
hostA.DOMAINAA.com - - [22/Sep/2005:11:49:02 +0800] "GET /msg-ms/Tasks/operation/cgi_enduser?cmd=deleteuserfolder&object=|enduser&userdn=uid%3DServiceAdmin%2Cou%3DPeople%2Co%3DDOMAINAA.com%2Co%3Disp&userpwd=PASSWD&user=uid%3DuserAA%2Cou%3Dpeople%2Co%3DDOMAINBB.com%2Co%3Disp HTTP/1.0" 200 92 - { - }
Any body having any clue ....."

hi,
I found no restriction of Internal on the mentione page so this is the buglist I found :
List of bugs verified in iDA1.2p2
4742853 - unable to edit mailists with name containing single quote
4613879 - Selected focus when sorting mesage filters.
4621763 - Domain Organization Users Cannot be Deleted/purged by CLI.
4733829 - My Account "Set Mail Filter" clicking causes JavaScript Error
4760708 - RFE: Prevent users from creating filters with same name
4768794 - RFE: iDA UI should not allow customer to set Gbytes
4800717 - "OK" and "apply" button does not function any more in particular scenario
4806086 - RFE: iDA UI should not allow customer to set more than 2147483637 bytes
4821819 - error when maximazing "Create a user" window
4907306 - iDA should not display the change password page when the password is already exp
4911038 - problem in the language of password expiration page
4940927 - SSO: iDA shows previous user's session when invoked from Webmail
4949005 - SSO fails between webmail and iDA depends on characters of SessionID
4968403 - iDA causing web server to consume more CPU
4986070 - Clicking on 'About' link shows wrong version of delegated administrator
What is the idacli tar file for?
With iDA 1.2p2 you will see a file called idacli-1.0-withJRE-us.sparc-sun-solaris2.6.tar which is for the 6.0 customers who never had a imadmin binary. It is not intended as an upgrade for 5.2 customers. So they should not try to install it at all.
What it is not?
It is not a version which will work with Web Server 6.1.
It is tested and supported with Web Server 6.0x (6.0.1, 6.0sp5)
It is not a version which should be used without Direct LDAP setup in the Messaging Server. (2 negatives, ok, I mean they really should be using Direct LDAP)
It will not work with Identity Server or schema 2.
It is not part of Messaging 6.0 (although we tested it for EXISTING customers who are going from Messaging 5.2 to 6.0 and using schema 1, we telll customers they can use the iDA they got from 5.2, and this is the one we mean.)
Regarding the install, you should use the release notes of the iDA1.2p1
I'm however, not sure it would solve your problem. I have not found any reference to the described issue which matchess it completely.
And if the upgrade would solve it it's probably because something is rewritten, not fixed ... but you do not know what caused it. I don't like this myself.
I suggest you better open a support case so it is determined what the real problem is.
Cheers, Ben.

How to User Purge Recyble bin as System

Similar Messages

Maybe you are looking for