How to validate a user login attempt to your computer's IP address ?

I Need validate Oracle users with your ip address
example
usrerdb 192.168.0.1
userdbx 192.168.0.2
For some users may only have one active secion
Anybody know how do ?

Really a user connects to the db which is the owner of the application, the user will need to validate it with the web server ip address
exemple
web server <=> connect login db <=> userdb = 192.168.x.x <=> login valid db
192.168.x.x
This user only can connect from your ipadress, defined in a table, procedure or function
Regards
Edited by: user13717863 on Jan 12, 2011 5:53 PM

Similar Messages

How to Validate a User on the click of a button in Oracle APEX

Hi,
How to Validate a User on the click of a button in Oracle APEX.
say for e.g: I want to allow only a specific user to go beyond after clicking on a button and restrict all the other Users. Any ideas please.
Thanks in Advance,
Af

Well , the actual idea was to hide the button for specific users and show the button only for some specific users... is this possible...?
@ AndyH: yeah, what you have suggested also fits well for my requirement... Could you please let me know how can i achieve it...
Regards,
Af

Failed user login attempts

hi can u say in which failed user login attempts will be stored.

Hi,
Configure the SAP audit system with TC SM19.
Then use TC SM20 to see failed logins (and much more)
cheers
Jan

How to check whether user login in SNC mode or Non - SNC Mode

Hi
When SNC is enabled system will accept secure network connections. But,It is up to the user to login in SNC mode or NOT.
Can any one let me know How to check whether user login in a SNC mode / Non-SNC mode?. Is it only through SU01?.
Is there any other possibility?. where to check if user login through RFC connections?.
Please correct me if i am wrong.
Regards
Srinivas P.

Hi,
Where to check if user login through RFC connections?
Check T-Code SM04 on every instance. In the column Type you can see what kind of login has been used (GUI, RFC, Plugin, System).
But,It is up to the user to login in SNC mode or NOT.
Depends. Check these [parameters|http://help.sap.com/saphelp_nw04/helpdata/EN/19/164442c1a1c353e10000000a1550b0/content.htm]:
snc/accept_insecure_cpic
snc/accept_insecure_gui
snc/accept_insecure_r3int_rfc
snc/accept_insecure_rfc
Regards,
Sven

Our system has detected an unauthorized login attempt to your AppIeID from an IP address location different than one you usually use. In order to protect your account, we will disable your AppleID due to our concern for the safety and integrity of the App

Our system has detected an unauthorized login attempt to your AppIeID from an IP address location different than one you usually use.
In order to protect your account, we will disable your AppleID due to our concern for the safety and integrity of the AppIe community.
In order to confirm that you are the rightful owner of this account, we recommend that you click here: My Apple ID.
I received this e-mail during the night and wondered if is genuine?

It's a scam to steal your Apple ID and password.
Delete it.

In digital editions how to you access the pdf file on your computer - I want to read in acrobat

in digital editions how to you access the pdf file on your computer - I want to read in acrobat as digital editions too hard to read.@@

On Mac, try looking in:
/Users/dug.geo/Documents/Digital Editions
On Windows, look for "Digital Editions" in "My Documents". If it's not there, look one level above "My Documents".
If you know the filename of the PDF, you could also try doing a file system search for it.

How can you tell if someone is accessing your computer or camera remotely?

How can you tell if someone is accessing your computer and/or camera remotely?

what is making you suspicious that this is happening? Or is this just a general question?

How do you get time machine to reset your computer to the specific date you would like?

How do you get time machine to reset your computer to the specific date you would like?

Hey carlleeh,
Thanks for the question. The following resource may guide you through that process:
OS X Mountain Lion: Recover your entire system
http://support.apple.com/kb/PH11192
Thanks,
Matt M.

How do you load a pdf file to your computer once its been created

how do you load a pdf file to your computer once its been created

Hello there,
Once you have created a PDF file with Acrobat.com, this file will live in your file organizer; if you select the file, you will have the option to download it. You can do this either while viewing the document (by clicking the "Download" button in the top menu bar) or from your organizer (hovering over the file name, you will see a little arrow; click it, and in the resulting menu choose "Download"). In both cases, you will be prompted to choose the location on your computer to which to save the file. Once you have chosen a spot, the file will be saved there.
Please let me know if you need any more information on this process.
Best,
Rebecca

How to restrain the user login portal once, in the same time??

Hi
I need to restrain the user can't repeat to login portal ....
to reduce portal loading
How can I restrain the user login portal once, in the same time???
Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
tks

Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
- Jim

How to change a users login password via single user mode, plus multiple issues?

So, there is much to this Thread.
(First Issue)
A lil back ground, i'm working on a MacBook Pro 3,1 running OS X Tiger 10.4.(something, no idea), the The user has forgotten their account password. Now before you tell me to just change it through the Root Admin account, that account seems to have its own issues, the accounts do not show up in the system preferences, therefore not allowing me to change that users account password.
(Second Issue)
Once I'm able to login into the users account, is there any way to disable / erase / eradicate the key chain system?
(Third Issue)
All of a sudden the MacBook has lost all audio capability, both in the built in speakers and through the headphone jack.
i'm open to any ideas, its currently 10:14am the user is wanting this to be done by 2:45pm please help i'm desperate and i don't want to be defeated by a Mac

It's possible some of these things are related. I'd first do a basic verification of the computer's system.
First, if at all possible make a backup of the drive in its present configuration. If something goes wrong during repair attempts and makes things worse you will have a backup. You will have to decide how to work this in the light of any present backups you may have, for example, a backup that may be a few days out of date. In that case you may want to keep that one and make a second backup of this as they are now, though I realize people often don't have a lot of empty drives sitting around.
Boot from the System installer disc that came with your computer or is the one for the version you currently have on there, select language if applicable, choose utilities, run Disk Utility and verify (and repair if necessary) the drive. You can verify a drive from DU on your main drive while booted but I have found this can result in incorrect reporting of errors. To repair your drive you have to run it from a drive other than the boot drive anyway.
Next, boot from your drive in [Safe Mode|http://docs.info.apple.com/article.html?artnum=107393] and repair permissions. You can repair permissions while booted from the installer disc but this uses the permissions configuration on the installer disc which may be out of date if you have run any updates on your computer. Booting your computer to Safe Mode restricts the number of things running on your computer while permissions are being run and does a bit of spring cleaning at the same time.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
From BDaqua (couldn't have said it better):
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer (Edit: Do not use this disc if it is not the same general version as what you have currently on your computer, e.g. use a Tiger disc for a Tiger drive, not a Panther disc), then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes."

How can I know Users login in EP?

Hi to all,
How can I know how many users Login in EP?I want to navigate all those users.

Hi Supriya,
thats is the default setting for the activity report, if you need some changes in the setting then you have to do that for that you need the role of System administrator.
1.choose System Administration -->System Configuration
2.detailed navigation, choose Service Configuration. The Service Configuration Editor is displayed
3.Applications >com.sap.portal.activityreport.core>Services-->ActivityReport
4.Right-click ActivityReport and choose Configure.
Dont forget to appreaciate if helpful.
Manisha

How to Validate the user entred value

Hi All
I am new to APEX... :)
Can any one send me the URL or material where i can go through and create sample applicaiton having the following functionalities
1) Create a form for the user to enter the data
2) Create users and give access
3) Validate the user entered values (Validation of a e-mail filed or Phone no)
Thanks & Regards
Hari

Hari,
You should start on our Getting Started page (http://www.oracle.com/technology/products/database/application_express/html/getting_started.html). I would suggest you do the OBE. It will show you how to create an application, add validations (that is what will make a user enter data in your email and phone fields) and create users. It uses APEX Authentication which means that any developer within the workspace can access and run the application and that you can also create end-users from within your workspace that will only be able to run your applications (not access the development environment).
It will definitely answer your questions -
-- Sharon

How to retrieve my user login

I've forgotten the user login for my super old mbp, now I can't log in.
Is there anyway to solve this? Thanks

http://support.apple.com/kb/HT1274

Can't sign in (computer not validated); followed Help directions and did no good. Any thoughts on how to "validate" my iMac (which is my main computer)

Help!

If you are running v10.6.5 of Snow Leopard as your profiles suggests, you need to update your software.
Click the Apple menu icon top left in your screen then click Software Update...
You can "authorize" your computer but it must be done using iTunes.
Launch iTunes. From them menu bar click Store / Authorize This Computer.
Login problems using your Apple ID help here > Apple - Support - Apple ID

How to validate a user login attempt to your computer's IP address ?

Similar Messages

Maybe you are looking for