How to Validate on Tab?

Dear All,
Generally the validations we write in PAI work only on pressing the 'Enter' key. Is there a way to make them work on the press of the 'Tab' key?
Regards,
Alok.

Dear Friends,
Thanks a lot for your reply but I's not referring to Tabstrip at all. The scenario is like this: I have a dialog screen and there are text input fields also on this screen. I have written some validations on this input fields. These validations trigger when I press the ENTER key after inputting the value in these fields. My question was how can I trigger these validations if I input a value in one field and move to another using the Tab key and without pressing the Enter key at all.
Thanks once again,
Regards,
Alok.

Similar Messages

How to validate table entries for that table

i hav created one ztable se11.how to validate table entries for that table

hi,
create foreign key relation ships
do the following way
create a check table with key fields the fields which you want to check
create a foreign key relations with that table
the procedure is as follows
To create your check table:
Begin at the Dictionary: Initial Screen.
Type the table name in the Object Name field.
Choose the Tables radio button.
Press the Create button. The Dictionary: Table/Structure: Change Fields screen is displayed.
Type a short text, choose delivery class A, and tickmark Tab. Maint. Allowed.
Type the field and data element names at the bottom of the screen.
Tickmark both fields to indicate that they both form the primary key
Press the Save button on the Standard toolbar. The Create Object Catalog Entry screen appears.
Press the Local Object button. You are returned to the Dictionary: Table/Structure: Change Fields screen
Press the Technical Settings button on the Application toolbar. The ABAP/4 Dictionary: Maintain Technical Settings screen is displayed.
In the Data Class field, enter APPL0 (APPL0 with a zero, not APPLO with an alphabetic O).
Enter 0 (zero) in the Size Category field.
Press the Save button.
Press the Back button. You are returned to the Dictionary: Table/Structure: Change Fields screen.
Press the Activate button on the Application toolbar. The message "was activated" appears in the status
bar and the Status field contains the value Act..
Choose the menu path Utilities->Create Entries to enter data into your newly created check table. Enter six rows with land1 values of US, CA, DE, IT, JP, and AU.
Foreign Key Creation Procedure
To create a foreign key:
Begin at the Dictionary: Initial Screen.
In the Object Name field, type the name of the table that is to contain the foreign key .
Choose the Tables radio button.
Press the Change button. The Dictionary: Table/Structure: Change Fields screen is displayed.
Position your cursor on the field that is to become the foreign key
Press the Foreign Keys button on the Application toolbar. The Create Foreign Key screen will be displayed
Type a description of the foreign key in the Short Text field, for example, Country Code validation.
Type the name of the check table (-t005) in the Check Table field, or click on the down-arrow and choose it from the list.
The Change Foreign Key pop-up appears. It states Check table name was created or changed. Generate a proposal for field assignment? Press the Yes button.
You are returned to the Create Foreign Key screen. The check table field names and the foreign key field names are displayed. (The check table field names are -t005-mandt and -t005-land1. The foreign key field names are -lfa1-mandt and -lfa1-land1).
Press the Copy button. You are returned to the Dictionary: Table/Structure: Change Fields screen and the message "Foreign key was transferred" appears in the status bar. The Status fields contain the values Revised and Not saved.
Press the Activate button on the Application toolbar. The message "was activated" appears in the status bar. The values in the Status fields are now Act. and Saved.
reward if helpful
prasanth

How to validate an attribute in a table/EO using a DB Table

I have an attribute LocationId in DuplicateLocationEO(LocationId,LocationName)
And I need a validation on this so that user can enter a LocationId that exists in LOCATION_ID of HR.LOCATIONS table
How to validate an attribute in a table/EO using a DB Table?

Issue: Insert a value into an attribute if it is valid, Like it is available in another table.
Scenario: Insert a Location into a DuplicateLocationEO based on LocationEO.
Solution: Create a Entity Validator on LocationId of DuplicateLocationEO that is list based on query of LocationEO’s LocationId.
Note: if the validation is created at attribute level, then it leads to NPE or Undesirable results.
Procedure Steps:
Step#01: Open desired Entity Object “DuplicateLocationEO”, Go to “Overview” tab & “Business Rules” finger tab.
Step#02: Select “Entity Validators” & Click “+”
Step#03: Set the following Rule Definition Tab:
•     Select Rule Type as “List”
•     Attribute “LocationId”
•     Operator “In”
•     List Type “Query Result”
•     Enter SQL Statement “Select LOCATION_ID FROM LOCATIONS”
Step#04: Now go to “Failure Handling” tab & Select radio button for “Error”.
Step#05: Click the Magnifier link to create a message.
Step#06: In the “Select Text Resource” popup. Provide the following
•     Display Value: “Invalid LocationId: {LocationId}. Please enter a valid Location”
•     Key: INVALID_LOC
•     Description: message when user enters an invalid location.
Step#07: Click “Save and Select” Button
Step#08: Click “OK” Button
Reference:
DuplicateLocationEO DDL Script:
CREATE TABLE "HR"."TEST_LOC"
(     "LOCATION_ID" NUMBER NOT NULL ENABLE,
     "LOCATION_NAME" VARCHAR2(50 BYTE) NOT NULL ENABLE,
     CONSTRAINT "TEST_LOC_PK" PRIMARY KEY ("LOCATION_ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
To Populate Rows:
Insert into TEST_LOC select Location_id, city from LOCATIONS

How to validate numbers in char field.

Hello all,
I have one database column with char data type. This field should allow insert only
numbers [ zero to nine] and plus symbol .. how to validate this?
Pls help me..
I.m using oracle 9i database. So it does not allow REG-EXP and WITH methods.. So give some
sql coding to do this

As this forum is for issues with the SQL Developer tool, you'll probably get more answers in the SQL And PL/SQL forum.
Regards,
K.

How to open "All Tabs" from previously shown pages history?

Hi,
How to open "All Tabs" from previously shown pages history. I am not asking about "Reopen from last session". I am asking about how to open all tabs from previous webpage links from a past date from history, currently its allowing me to select each page link manually by clicking it.
Thank you!

Select the first item you wish to open, scroll down to the last, Shift-click that one & all those between should be selected too. Double-click on them & they should all start to open... or you can copy & then drag/paste into a new or existing bookmarks folder.

How to validate the dates in the table control ?

How to validate the dates in the table control ?
Can I write like this ?
LOOP AT it_tab .
CHAIN.
FIELD : it_tab-strtdat,it_tab-enddat.
module date_validation.
ENDCHAIN.
ENDLOOP.
Module Date_validation.
ranges : vdat type sy-datum.
vdat-sign = 'I'.
VDAT-LOW = it_tab-STRTDAT.
VDAT-HIGH = it_tab-ENDDAT.
VDAT-OPTION = 'BT'.
APPEND VDAT.
WHAT CODE I have to write here to validate ?
and If I write like this How can we know which is the current row being add ?
It loops total internal table ..?
Bye,
Muttu.

Hi,
I think there is no need to put chain endchain.
To do validation you have to write module in PAI which does required validations.
Thanks
DARSHAN PATEL

How to get "tones" tab in drop down menu

how to get "tones" tab in drop down menu

I assume that you are referring to the categories on your iTunes library (?), if you are then go into Edit > Preferences and on the General tab make sure that Tones is ticked
You can also enable the left-hand sidebar on iTunes 11 on a PC via control-S, which then allows you to view the sections of your library (those enabled in Preferences) via that sidebar, and if you have iOS devices they will also show on that sidebar when connected.

How to read a tab seperated data from a text file using utl_file

Hi,
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....
Thanks in advance...
Naveen

Naveen Nishad wrote:
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....If it's a text file then UTL_FILE will only allow you to read it a line at a time. It is then up to you to split that string up (search for split string on this forum for methods) into it's individual components.
If the text file contains a standard structure on each line, i.e. it is a fixed delimited structure, then you could use external tables to read the data instead.

How to copy a tab from one tab group to another?

In Tab groups view, drag and drop allows one to move one tab from one group to another. But how to copy a tab?

Press '''CTRL''' while dragging to copy instead of moving.

How to validate material status in physical Inv Doc creation using MI01

Hi Experts,
I would like to know how to validate material status while creating physical inventory document using MI01 transaction.
I tried to figure out a suitable BADI and customer exits ,but it didnt work out well.
Kindly share your thoughts on how this can be achieved.
Regards,
Mohammed Aslam Rasheed

Do you really create your inventory documents with this MI01 transaction manually by entering material for material?
The real transaction for physical inventory is MI31. How do you want SAP to react if hundreds of materials are selected and inventory documents are created in a batch process?
SAP takes care about the material status in MI04 and MI07 transactions.
I am not aware of any exit for MI01 maintenance, you may consider Explicit and Implicit Enhancement Options

How to Validate a User on the click of a button in Oracle APEX

Hi,
How to Validate a User on the click of a button in Oracle APEX.
say for e.g: I want to allow only a specific user to go beyond after clicking on a button and restrict all the other Users. Any ideas please.
Thanks in Advance,
Af

Well , the actual idea was to hide the button for specific users and show the button only for some specific users... is this possible...?
@ AndyH: yeah, what you have suggested also fits well for my requirement... Could you please let me know how can i achieve it...
Regards,
Af

How much RAM do tab groups use (on average)? Do I need to watch out for how many groups I create?

I may have gone overboard in the creation of Tab Groups. I say this because now my system is beginning to act a bit sluggish. I created 7 groups, two of which have 9 or 10 tabs. Should I pull back on the number of groups I create (as well as how many tab are located within each group). That is: How much RAM do tab groups use. How can I calibrate or understand the trade off between these markers and the amount of RAM they use?

You can see the memory usage on the about:memory page.
You can open about: pages via the location bar like you open a website.

How to validate the file path when downloading.

Hi
How to validate the file path when downloading to Presentation or application Server.

hiii
you can validate file path by following way
REPORT zvalidate.
TYPE-POOLS: abap.
DATA: w_direc TYPE string.
DATA: w_bool TYPE abap_bool.
w_dir = 'c:\Myfolder\'.
CALL METHOD cl_gui_frontend_services=>directory_exist
EXPORTING
directory = w_direc
RECEIVING
result = w_bool
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
wrong_parameter = 3
not_supported_by_gui = 4
OTHERS = 5.
IF NOT w_bool IS INITIAL.
WRITE:/ 'Directory exists.'.
ELSE.
WRITE:/ 'Directory does not exist.'.
ENDIF.
regards
twinkal

How to validate a date in message mapping

Hi experts,
how to validate a date in message mapping. For ex: if date comes as 2008/02/31, then file it shold not get processed.how to achieve this in message mapping. Please help .
Thanks&Regards,
Reyaz Hussain

Hi,
There are few simple ways for date validation as follow,
1.If you would like to handle it in XI only, then in message mapping you could verify about it with the help of generating smart exception.
For e.g in mapping there is one Date conversion API i.e. somthing DateTransformation It converts the incoming date format to required format. Here give the date format i.e expected from Sender File.
If in case the format miss-matched then it will create the exception.
You could handle this exception with the use of [Alert notification|http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm] and could be even able to notify to sender system about it.
2. The another solution is easy for SAP synchornous communication --If you are passing the file data to SAP, then you could use below function modules to verify date format in receiver RFC/BAPI or inbound IDOC program. If the sy-subrc is not 0 then don't process further.
CONVERT_DATE_FORMAT
ISU_DATE_FORMAT_CHECK
Thanks
Swarup

How to validate the FI-AR& AP& FI-GL   and CO-PA extractor in R3

Hi,
I would like to do the integration testing in R/3 and BW.
How to validate Standard FI-AR& AP& FI-GL and CO-PA extractor in R/3.
Snapshot result of RSA3 and the tables?
What are the tables and extractors need to be validate for FI-AR& AP& FI-GL   and CO-PA extractor in R3.
As per our integration testing for FI-AR& AP& FI-GL   and CO-PA extractor in R3.
How would i like to do the testing in BW QA system.
Please some one will help me in this and answer would be great appreciate.

Solved

How to Validate on Tab?

Similar Messages

Maybe you are looking for