How to verify the current connections on a firewall?
I am a new computer support specialist in a small company. We would like to focus on network security. How can I verify the current connections on a PIX firewall? We would like catch malicious behavior while it's occurring. How do I inspect all the connections going through our firewall - both in and out. My focus is on anomalies and investigate them; this could include outbound FTP or inbound Telnet/SSH sessions. We have a Cisco perimeter router, which functions as the company firewall. A PIX firewall sits behind the router and its sole function is to build and terminate IPSEC tunnels. I would appreciate any advise.
Thanks.
Said
Hi Said
"sh crypto isa sa" will show all the IPSEC phase 1 connections to your pix.
"sh crypto ipsec sa" will show all the IPSEC phase 2 connections to your pix.
"sh conn" will show all the connections that have been allowed through your pix.
HTH
Jon
Similar Messages
-
How to use the current connection when calling db procedure ?
dear all,
Am using Jdevleoper 11.1.1.3 ,
I have a java class that call a database procedure , now everything is going fine with me but a bit slow bcoz am openning a new connection I think it would be definitely faster if am using the current connection
so how can i re-write my code so i can use the current connection istead of defining a new connection to the DB :
public void DeleteApp (int PAppNo){
String username,password,thinConn;
username = "ACC";
password = "ACC";
thinConn = "jdbc:oracle:thin:@..."
try {
DriverManager.registerDriver(new OracleDriver());
Connection conn = DriverManager.getConnection(thinConn, username, password);
CallableStatement cs = conn.prepareCall(" { call myprocedure(?,?,?) } ");
cs.setInt(1,PAppNo);
Thanks for all,
LamaDelta,
You shound NOT be doing JDBC calls from your UI project. You should put the code as a service method in your application module, expose the service method to the client, and then call it through the binding layer from your UI http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcservices.htm#sm0212
thx John & timo but u always post the same reply at the same time for my questionsTimo and I have been around long enough that we recognize the questions that have been posted 9,461,293,811 times before and know the stock answers, and know where in the documentation the answers are given. As you appear to be new to ADF, I'd strongly recommend reading the Fusion Developer's Guide (skim it once and then read in detail the parts that interest you). As I've said before, so many of the basic (and not-so-basic) concepts are covered in there. Once you've skimmed it in enough detail, then the next time you have a problem, you might not know the answer, but you'll remember, "ah, I think I read something about that before, let me check..."
John -
How do I find the current connections?
I've noticed that the disk doesn't always spin down after using my media player (OSMC on a Raspberry Pi) to access my My Cloud, and I'd like to debug this. First, I need to see if there's a persistent connection by checking the connection status at the My Cloud command line. Googling tells me that you use the "smbstatus" command for this -- and there's my first stumbling block. That command is not present because it's in the "samba" package, which I am surprised to find is not installed by default. # apt-cache policy samba
samba:
Installed: (none)
Candidate: 2:4.1.17+dfsg-2
Version table:
2:4.1.17+dfsg-2 0
500 http://ftp.us.debian.org/debian/ jessie/main armhf Packages I could install the "samba" package with "apt-get install samba". Is that safe to do on the My Cloud? The My Cloud is all about providing samba shares and yet the "samba" package is not installed. I was wondering if it was not installed for a reason. Installing it won't trash the My Cloud's normal services? Or is there a better way to find the current connections -- one that doesn't need the "smbstatus" command?Hi and welcome to the WD community.
I have not tried this, lets see if another user can share some tips and information on this matter. -
How to cooperate the current mail system with Sun Java Commnication Suite 5
Dear all and Shane,
Excuse me for bothering you again.
Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5. I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.
Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5.
My plan is as following
1. Sun Java Communication suites 5 server ( I called it comms5 ) will be in DMZ zone and will open the necessary ports in firewall.
2. I will create more than six sub domain name in Sun Delegate server and the necessary accounts within these domain names.
3. All messages will be transmitted via Postfix and clients will retrieve from Courier-IMAP
4. All Clients included other branch offices will use different mail clients to share their calendars, contacts via COMMS5 ( But how will COMMS handle the messages such like invitation ? )
Any suggestions will appreciate.
PS: Is it possible to classify the contacts in outlook address book ?
For example, when user click the receiver, it will show like as following
GLOBAL ADDRESS BOOK
--Director
--and so on
----CN.BRANCH OFFICE
-----------CN01 EMAIL ADDRESS
-----------CN02 EMAIL ADDRESS
-----------CN03 EMAIL ADDRESS
and so on
----JP.BRANCH OFFICE
-----------JP01 EMAIL ADDRESS
-----------JP02 EMAIL ADDRESS
-----------JP03 EMAIL ADDRESS
and so on
----TW.BRANCH OFFICE
and Due to the user account is located in CN.BRANCH OFFICE, it will extend the CN.BRANCH OFFICE contacts level.
Excuse me for bad English, hope you can understand it.
Best Regards,
BruceDogz wrote:
Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5.
I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.Getting your current mail system to 'co-operate' in this way will require more time then simply migrating the accounts of users on the current mail system to the comm-suite-5 installation and making use of UWC for Webmail access and ClamAV/SpamAssassin integration within the messaging MTA.
Also the use of Outlook Connector with a non-Sun IMAP backend isn't supported, nor is the use of a non-Sun IMAP backend possible with UWC.
Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5. Once again I should remind you that CentOS is not a supported platform for comm-suite-5
Regards,
Shane. -
How to see the Currently loged on user and Locks using Enterpirse manager
Hello Everybody,
I want to see using enterpirse manager
*1.* the currently connected users
*2.* The locks held by users.
How to do this in Enterprise manager?
RegardsHello Asif,
Your and Deepak suggessions do no t show the connected users. Instead If we use the following query,it will give us the names of all users that are currently connected.
SELECT SUBSTR(s.username,1,15) USERNAME,
SUBSTR(s.status,1,8) STATUS,
SUBSTR(s.server,1,10) SERVER,
SUBSTR(s.type,1,10) TYPE,
SUBSTR(s.event,1,20) "WAIT EVENT",
DECODE(s.command,
1,'Create Table',
2,'Insert',
3,'Select',
6,'Update',
7,'Delete',
8,'Drop',
9,'Create Index',
10,'Drop Index',
12,'Drop Table',
17,'Grant',
26,'Lock Table',
42,'Alter Session',
43,'Alter User',
44,'Commit',
45,'Rollback',
s.command) COMMAND
FROM v_$session s, v_$session_wait w
WHERE (s.sid = w.sid)
AND s.username != 'SYS'
ORDER BY s.username;
Best Regards -
How to verify that your connected to wifi
How to verify that your connected to wifi
3 ways:
1. The symbol at the top of the iPad on the left hand side. Will tell you if you are connected, and how strong the signal is:
2. Going into Settings->Wifi will tell you what Wifi network you are connected to at the time if any,
3. If the network has internet access, you should be able to open a website in Safari. -
HT1600 How long does the current Apple,TV software download take
How long does the current Apple TV software up date take , or should it take ..?
Depends on your internet connection. Mine is usally done in a few menutes, but I have seen the install part take up to 45 min.
-
How to get the current path of my application in java ?
how to get the current path of my application in java ?
thanksTo get the path where your application has been installed you have to do the following:
have a class called "what_ever" in the folder.
then you do a litte:
String path=
what_ever.class.getRessource("what_ever.class").toString()
That get you a string like:
file:/C:/Program Files/Cool_program/what_ever.class
Then you process the result a little to remove anything you don't want:
path=path.substring(path.indexOf('/')+1),path.lastIndexOf('/'))
//Might be a little error here but you should find out //quickly if it's the case
And here you go, you have a nice
C:/Program Files/Cool_program
which is the path to your application.
Hooray -
How to calculate the Current APC (Acquisition and Production Cost)
Hi,
Please help me how to calculate the Current APC.
The Current APC (Acquisition and Production Cost) is a calculated value based on Previous Year Acquisition balance plus any value changes up to the time of the report.
The Asset History Report (RAGITT_ALV01) calculates the Current APC value &
The Current APC can also be found in the Asset Explorer (transaction code AW01N) under Country Book 10/ Posted Values tab then the line Acquisition Value and column Posted values.
I suppose that the calculation of Current APC (Acquisition and Production Cost) is getting done in the GET statements in the report RAGITT_ALV01, but unable to find the actual logic.
Please help me.
Thanks in advance,
SatishHi,
you'll find the logic in fm FI_AA_VALUES_CALCULATE
A. -
How to calculate the Current APC
Hi,
Please help me how to calculate the Current APC.
The Current APC (Acquisition and Production Cost) is a calculated value based on Previous Year Acquisition balance plus any value changes up to the time of the report.
The Asset History Report (RAGITT_ALV01) calculates the Current APC value &
The Current APC can also be found in the Asset Explorer (transaction code AW01N) under Country Book 10/ Posted Values tab then the line Acquisition Value and column Posted values.
Thanks in advance,
SatishHi,
I suppose that the calculation of Current APC (Acquisition and Production Cost) is getting done in the GET statements in the report RAGITT_ALV01, but unable to find the actual logic where it is being done.
Please help me.
Thanks in advance,
Satish -
got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE
Under Network Preferences, select the WiFi
click on "Advanced..." button
Select the network you want to delete from the list and click on "-"
Click "Ok"
Click "Apply"
Well done ;-)
You may also want to delete the wireless key from Keychain.
Open Keychain, seach for the old wifi network name, slect it and click delete -
How to check the current EHP stack level? in SAP
Dear All,
How to check the current EHP stack level? in SAP . i have checked forum before i am posting but still comfused .
same one said SAP_APPL , EA_Appl and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
Pls check the details and confirm either is ehp1 or ehp4 .
Component version is simply shows SAP ECC 6.0 in system -> status.
Software Component - Release - SP level
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
SAP_HR 604 0029
SAP_HRCAR 604 0029
SAP_HRCAT 604 0029
SAP_HRCAU 604 0029
SAP_HRCBE 604 0029
SAP_HRCBR 604 0029
SAP_HRCCA 604 0029
SAP_HRCCH 604 0029
SAP_HRCCL 604 0029
SAP_HRCCN 604 0029
SAP_HRCDE 604 0029
SAP_HRCDK 604 0029
SAP_HRCES 604 0029
SAP_HRCFI 604 0029
SAP_HRCFR 604 0029
SAP_HRCGB 604 0031
SAP_HRCHK 604 0029
SAP_HRCID 604 0029
SAP_HRCIE 604 0029
SAP_HRCIN 604 0029
SAP_HRCIT 604 0029
SAP_HRCJP 604 0029
SAP_HRCKR 604 0029
SAP_HRCMX 604 0029
SAP_HRCMY 604 0029
SAP_HRCNL 604 0029
SAP_HRCNO 604 0029
SAP_HRCNZ 604 0029
SAP_HRCPH 604 0029
SAP_HRCPT 604 0029
SAP_HRCRU 604 0029
SAP_HRCSE 604 0029
SAP_HRCSG 604 0029
SAP_HRCTH 604 0029
SAP_HRCTW 604 0029
SAP_HRCUN 604 0029
SAP_HRCUS 604 0029
SAP_HRCVE 604 0029
SAP_HRCZA 604 0029
SAP_HRGXX 604 0029
SAP_HRRXX 604 0029
EA-IPPE 400 0018
EA-APPL 604 0008
EA-DFPS 600 0018
EA-FINSERV 604 0007
EA-GLTRADE 604 0008
EA-HR 604 0029
EA-HRCAR 604 0029
EA-HRCAT 604 0029
EA-HRCAU 604 0029
EA-HRCBE 604 0029
EA-HRCBR 604 0029
EA-HRCCA 604 0029
EA-HRCCH 604 0029
EA-HRCCN 604 0029
EA-HRCDE 604 0029
EA-HRCDK 604 0029
EA-HRCES 604 0029
EA-HRCFI 604 0029
EA-HRCFR 604 0029
EA-HRCGB 604 0029
EA-HRCHK 604 0029
EA-HRCID 604 0029
EA-HRCIE 604 0029
EA-HRCIN 604 0029
EA-HRCIT 604 0029
EA-HRCJP 604 0029
EA-HRCKR 604 0029
EA-HRCMX 604 0029
EA-HRCMY 604 0029
EA-HRCNL 604 0029
EA-HRCNO 604 0029
EA-HRCNZ 604 0029
EA-HRCPH 604 0029
EA-HRCPT 604 0029
EA-HRCRU 604 0029
EA-HRCSE 604 0029
EA-HRCSG 604 0029
EA-HRCTH 604 0029
EA-HRCTW 604 0029
EA-HRCUN 604 0029
EA-HRCUS 604 0029
EA-HRCVE 604 0029
EA-HRCZA 604 0029
EA-HRGXX 604 0029
EA-HRRXX 604 0029
EA-PS 604 0007
EA-RETAIL 604 0007
FINBASIS 604 0008
ECC-DIMP 600 0018
ERECRUIT 604 0008
FI-CA 604 0008
FI-CAX 604 0007
INSURANCE 600 0018
IS-CWM 600 0018
IS-H 600 0024
IS-M 600 0018
IS-OIL 600 0018
IS-PS-CA 604 0007
IS-UT 600 0018
LSOFE 600 0018
SEM-BW 604 0008
ST-A/PI 01M_ECC600 0001
Regards
Edited by: satheesh0812 on Nov 17, 2011 7:57 AMHi Sateesh,
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
EHP4 is derived from your component SAP_APPL 604.
In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
Hope this answers your query.
Regards,
Deepak Kori -
Hello All,
I am getting below error can you please help me
Error:-
The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.Perhaps this thread will help you out
http://stackoverflow.com/questions/11453066/error-the-transaction-associated-with-the-current-connection-has-completed-but
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
How to get the current page URL
HI All
I am working in oracle apps 4.0
I have one page called history in that i have one page item called Application url. My application id is 122 but its a copy of application 106
How to get the current page url for the page item.
Any steps should be help ful
Thanks & Regards
Srikkanth.MI'm not 100% clear on what the requirement is from the description, however it does sound like you are making things unnecessarily complicated.
If you want permanent/ID-independent links then use application and page aliases.
so here we used to display the url like this: <tt>{noformat}http://81.131.254.171:8080/apex/f?p=122{noformat}</tt>
Do you mean that the URL is displayed like that? If so that doesn't seem particularly helpful. How is anyone supposed to know what it is?
There are many ways to provide links in APEX—including lists and nav bars.
Where the link is to another resource located on the same server (such as another page in the same app, or a different app in the workspace), relative addressing can be used, making it unecessary to include scheme, domain and port information in the URL. For example, if the page to be linked to has a page alias <tt>ABOUT</tt> in an application with alias <tt>UNITY</tt>, and the apps share an authentication scheme/cookie to permit shared sessions, then the link URL is simply
f?p=UNITY:ABOUT:&APP_SESSION. -
How to get the "current date" in the BEx?
Hi all,
I need to get the "current date" in my Bex report in order to make a comparison. I know there is a "How to" which shows how to get the current date via a User Exit, but I didn't find it. Could you please help me?
Thanks1. Create a New Formula in Key Figures structure
2. Give tech name and description and Select "New variable" option
3. Next screen will launch Variable Wizard -> create a new variable with replacement path as processing type
4. in next screene select the date characteristic that represents the first date to use in the calculation (From Date)
5. In the next screen select Key in the Replace Variable with field. Leave all the other options as they are
6. In the next Currencies and Units screen select Date as the Dimension ID.
6. Save variable
repeate the Above steps to create another variable (To Date)
and now you can use these two new replacement path variables in your new formula.
Dev
Maybe you are looking for
-
Demo Check Flight Seat Availability works only once
Hi! I have configured the Check Flight Seat demo and I can execute it without an error after a restart of the whole SAP system. When I would like to execute it again I get following error: 405 ICM_HTTP_INTERNAL_ERROR In message monitoring is a CLIENT
-
Hello, We have a PO where the GR based IV was initially checked. Then the flag was unchecked and the PO was saved. After this GR took place with a 101. Later on the business reversed this GR (using a custom movement type, which is a copy of 102), bec
-
How to solve error - default position not allowed
Dear friends, While hiring a new person i am getting the error "default positon not allowed" in infotype 0001. PLOGI-PRELI switch for default positon is maintained. Kindly help.
-
I am unable to attach more than one photo to an email. It says there are "14 great photos" but only one gets sent. The pop up message says" Mail error: Can't get Para 8 of content of outgoing message ID131267600. Invalid index." I have no idea what t
-
SAP Netweaver Developer Studio Version Issue
Dear All, We need a clarification on SAP NWDS version to be installed on client machine. We have standalone SAP NW 7.3 (Enterprise Portal) server. Its SP level is sp00. To develop and deploy portal applications, Which NWDS version we need to use. We