How to view SAP JPA query

Hi All,
In Hibernate we can see the query by setting in persistence xml file
<property name="show_sql">true</property>
Do we have anything like this in SAP JPA so that i can see the actual query ?
If not is there any place in Server where can I check the fired query?
Many Thanks

Hi Arvind,
You can monitor JPA Cache, for more details please have look of the below help
Using JPA Monitors - Monitoring - SAP Library
Thanks,
Hamendra

Similar Messages

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to view a BI query with anonymous user in the portal

<b>Hi Gurus,</b>
Does anybody knows how to view a BI query in the portal with anonymous user?
Cause when i try to view a query the portal always ask for authentification. And i don't want to sign with a user cause my portal is for everybody and if the user logged in it shows the roles that previously were assigned.
I have the Netweaver 2004 with SP9
<b>Thank you Very Much</b>

do you have sso configured between portal and BW server, if yes the authentication pop up should not come.
if you dont want to do sso between portal and bw server and still want to logon to BW query with anonymous user,
in you bw server go to transaction sicf and navigate to DEFAULT_HOST->SAP->BW->BEX and double click on bex node in the resulting window, log on details section provide a default userid/password
Raja

How to view sap standard 0P_PRFP1 query variable

Hi Guys,
I want to view the code for sap stadard query varibale Previous Period of Current Fiscal Year (SAP Exit) 0P_PRFP1. I have checked in TCode SE37. I know i can view customer exits by viewing Tcode CMOD. Is there a transaction to view SAP standard variables?
Thanks
Forhad

Hi,
Is it Function Group BWCO -> Function Module RSVAREXIT_0P_PRFP1 ?
Regards,
Michael

How to view the sql query generated in query designer..?

Hi experts,
Can i view the sql query generated by the query designer for a query in sap bw?
regards,
ksvsivam

Hi Sivam,
You can definitely view the sql query.
Go to RSRT and give the report name. Then goto Execute+Debug and click on it.
A new window will open, there tick the box Display SQL/BIA Query and the press on the ok button.
Finally click on execute. The Sql query will be displayed.
Hope this helps.
Thanks,
Rahul

How to print sap bex query varaibles in webi report

Dear Friends,
I created a webi Report on universe ( Based on SAP BW Bex Query with variables).
its working fine. Now i want to show the selected variable values on the top of my webi report.
How can i access and print my bex query variables on header of my webi report.
We are using BOE 3.1 SP2, SAP BI 7.02.
Regards
Malik

Malik
That is default behavior of BO. The integration mapping from BI to BO will populates like that, COZ you made BI variable on top of Date dimension, which needs From and TO fields.
To display that info, what user has selected on the fly:
As suggested, use UserResponse() function.
keep in mind, prompt text and userresponse text must be identical. Otherwise, it wont't work.
Eg: prompt Text: Enetr From Date:
Var: =UserResponse(Enter From Date:) -->> Results: (Blank)
Why?? Prompt text Enetr not Enter
Hope it clears you.
I'm Back

How to migrate SAP Bex Query to BO report

Hi All,
I want to migrate some of the reports from Bex Query to SAP BO.
Will you suggest me what are the best ways to do this,Whether there are any tools to do this??
Regards,
Shiva Kumar G.C

Hi,
When you say migrate do you mean to use BOBJ for reporting?
If your answer is yes then other questions come into picture.
What type of reports you have in SAP- Adhoc, WAD, Formatted etc?
BusinessObjects is combination of some tools.
WebI is a web base tool and mostly used for Adhoc. You will have to create a Universe on the top of your Bex Query and then WebI Document (WebI Report)
Crystal Reports is used for formatted reporting. You will create connection on the base of your requirement. You can create a Universe or make a direct connection with your InfoProvider and then create your reports. Use MDX functionality to create Reports.
Crystal Xcelsius is used for dash board reporting.
And if your answer is no to above question and you want to migrate your reports to BOBJ like and upgrade without recreating the reports then it is not possible.
Regards,
Bashir Awan

How to use SAP BEX query Free characteristics in BO Universe?

Folks,
I have a BEX query which has lots of objects listed under free characteristics.
When I create a Universe these objects are not brought in the Universe.
Is there any way to bring those objects into our Universe?
Thanks
Bashir

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/03/24/businessobjects-and-sap-part-5
Ingo

How to build SAP B1 query reports for VAT in Source currencies

Hello,
Need help ASP

You may start your query by checking these threads first:
VAT Report
I need VAT Report
Re: Can we set tax amount directly instead of tax code?
Thanks,
Gordon

How to view constraints

I have added a constraing for my emp table
ALTER TABLE emp
add CONSTRAINT MyKey PRIMARY KEY (empno);
How can i view what are constraints for a table
How to view constraints?

Query ALL_CONSTRAINTS
HR%xe> desc all_constraints
Naam
OWNER
CONSTRAINT_NAME
CONSTRAINT_TYPE
TABLE_NAME
SEARCH_CONDITION
R_OWNER
R_CONSTRAINT_NAME
DELETE_RULE
STATUS
DEFERRABLE
DEFERRED
VALIDATED
GENERATED
BAD
RELY
LAST_CHANGE
INDEX_OWNER
INDEX_NAME
INVALID
VIEW_RELATED
SELECT * FROM ALL_CONSTRAINTS WHERE TABLE_NAME = 'MY_TABLE';

How to remove Decimals in Quantity Objects in SAP BO Explorer View created on top SAP Bex Query?

Hi,
I created SAP BO Explorer report on top of SAP BEx Query.
In SAP BEx Query, Decimals were hided but when i created OLAP Universe on top that SAP BEx Query and Created Index on top of Information Space in SAP BO Explorer and then created Exploration Views. But i'm getting Decimals in my Exploration Views where as SAP BEx Query in RSRT, no decimals were appearing.
Can anyone suggest me how to remove decimals in SAP BO Exploration Views.

Hi Ramana,
I am not use how you connect to SAP BEx query (Via universe or BWA or HANA)
What I could say is BWA and HANA, you cannot adjust this
For universe, you could try in universe layer, there is note about this
For BWA and HANA, this function might be enhanced but you 'd better raise OSS to SAP to check with them
Best regards
Alex yang

How to call SAP query in a program

Hi experts
I have created a query in SQVI its gives a result. Now i want this query to be used in my program. Is there any FM which gets the quary name and populates the result in iternal table. So that i can use that result.
I know without query you can write using the tables you can fetch the records but i just want to explore a new way to do things. If any body done such type let me know and also give some sample code or process how to achieve it.
Regards
Vijay

Hi Siva
My final option is that only. That you can do any how. But my intension is to learn something new way. How to do copy the query and where to inject the code is there any example in wiki or artical for that. I want to something new. Old way of creating a report program is possible i want to do this way. If some body could help me out.
@ karthik
I have generated the SAP query and i got the program but when i view the code i dont find any select statment or where storing my input data. How to identity that i did in debug mode but am not sure where it pulls the data and where it put in internal table. Can you throw some light with example code or an article.
Regards
Vijay

Save view button in SAP BW Query Report view

Dear all,
When SAP BW Query report iview is called in portal, u will get Save view, Bookmark, variableSreen...etc buttons.. When u click on saveview button...it will ask u to save as a view of that report with specfic name.
My question is, where it will get stored.?
If u give the BEx analyzer for users, u will be able to see the saved views.....but i dont want to give BEx analyzer to the enduser...
Kindly suggest me
Rgds
Pradeep
Message was edited by: Pradeep Reddy
Message was edited by: Pradeep Reddy

I hava the same doubt. Other portal web has a "Open View" link button, how can i config it?

SAP JPA simple query

Hello, experts!
I have a simple entity
@Entity
@Table( schema = "dbo", name = "class")
public class ClassEntity {
private Long id;
        @Id
     @Column(name="id")
     @GeneratedValue(strategy= GenerationType.IDENTITY)
    public Long getId() {
          return id;
     public void setId(Long id) {
          this.id = id;
I have about 10.000 records in this table. The simplest query "SELECT c FROM ClassEntity c WHERE c.id=:id" tooks 3-4 seconds! I have found (using mssql profiler) that SAP JPA implementation selects ALL records and only then returns the one I need!
Moreover, query "SELECT count(c) FROM ClassEntity c" tooks 3-4 seconds too, and its behaviour is the same! Have anyone an idea, whats going on? How can I select just 1 record (ClassEntity) from the table?
Thanks for any advice.

Hi Andrey,
the behavior you are describing would be absolutely unexpected.
Could you please double check using the SQL Trace (http://<host>:<port>/OpenSQLMonitors) that the generated SQL is a you are describing it.
-Adrian

How to write a SQL query in SAP B1 2007 B with input parameters?

How to write a SQL query in SAP B1 2007 B with input parameters, on execution of which will ask for some input value from the user and the values will be selected from a list such as item list?

The syntax like
SELECT * FROM OITM T0 WHERE T0.ItemCode = '[%0\]'
Thanks,
Gordon

How to view SAP JPA query

Similar Messages

Maybe you are looking for