How we will process error IDOC s.

Hi Experts,
can any body tell me how we will process the idoc when we got the error.
Thanks in advance.
-Bhaskar.

bhaskar rao wrote:
Hi Experts,
can any body tell me how we will process the idoc when we got the error.
Thanks in advance.
-Bhaskar.
Hi,
When an IDOC have some errors you need to set status for this IDOC by filling table IDOC_STATUS(           IDOC_STATUS                   STRUCTURE BDIDOCSTAT) and table RETURN_VARIABLES            (RETURN_VARIABLES              STRUCTURE BDWFRETVAR).
code sample:
LOOP AT IDOC_CONTRL.
  Set IDOC status
    CLEAR IDOC_STATUS.
    IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
    IF FLAG_ERROR_HAPPENED = C_FALSE.
      IDOC_STATUS-STATUS = '53'.       "OK!
JH/02.02.98/4.0C  KPr100004993 (Anfang)
    Fill Return variables
      CLEAR RETURN_VARIABLES.
      RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
      RETURN_VARIABLES-WF_PARAM = 'Processed_IDOCs'.
      APPEND RETURN_VARIABLES.
    Verknüpfungseintrag anlegen
      READ TABLE T_IDOC_MATNR WITH KEY DOCNUM = IDOC_CONTRL-DOCNUM
                              BINARY SEARCH.
      IF SY-SUBRC = 0.
        RETURN_VARIABLES-DOC_NUMBER = T_IDOC_MATNR-MATNR.
        RETURN_VARIABLES-WF_PARAM = 'Appl_Objects'.
        APPEND RETURN_VARIABLES.
      ENDIF.
JH/02.02.98/4.0C  KPr100004993 (Ende)
    ELSE.
      IDOC_STATUS-MSGID = I_MERRDAT-MSGID.
      IDOC_STATUS-MSGTY = I_MERRDAT-MSGTY.
      IDOC_STATUS-MSGNO = I_MERRDAT-MSGNO.
      IDOC_STATUS-MSGV1 = I_MERRDAT-MSGV1.
      IDOC_STATUS-MSGV2 = I_MERRDAT-MSGV2.
      IDOC_STATUS-MSGV3 = I_MERRDAT-MSGV3.
      IDOC_STATUS-MSGV4 = I_MERRDAT-MSGV4.
      IDOC_STATUS-STATUS = '51'.       "ERROR!
    Fill Return variables
      CLEAR RETURN_VARIABLES.
      RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
    return_variables-wf_param = c_wf_par_processed_idocs.
      RETURN_VARIABLES-WF_PARAM = 'Error_IDOCs'.
      APPEND RETURN_VARIABLES.
      WORKFLOW_RESULT = 99999.
    ENDIF.
    APPEND IDOC_STATUS.
  ENDLOOP.
Regards,
Gy

Similar Messages

  • How can we send Error Idocs via mail

    Hi,
    I have read read through forums and  understood that it can be achieved either through workflow or through report using table edidd & edids.
    If workflow option is used , does the mail trigger for every error idoc ? How can we send daily error report to user say by EOD containing all error idocs using all possible options.
    Regards,
    Rachel

    Rachel,
    I dont think so any direct Report will be available just to get Error IDOCs details. Although you can create a simple report to read the tables. An example is in below link.
    http://wiki.scn.sap.com/wiki/display/Snippets/Custom+report+for+IDOC+Monitoring
    Also, you can create a Query of EDIDC and EDIDS tables to obatin relevant information.
    Thanks,
    Ravi

  • How we will Search a IDOC

    Hi
      This is Durga Prasad i have doubt in idoc
                           how we will  Search  Idoc By its order no in inbound Side
    Thanks in advance
    Durga Prasad

    hi,
    U know the message and basictype ryt..so go to WE02/WE05 and give them,u will get list of iodcs for ur message and basictype...
    if u get the idoc number also u can directly go to WE02/WE05 and give the number,u will get ur idoc.
    order number will be thre in ur idoc data...u have to chek it...u need to check the segments 
    Regards,
    Nagaraj

  • How to process an IDoc using qRFC of version 6.30.060

    Hi all,
    Can anyone please tell me how can we process an IDoc using qRFC port of version 6.30.060.
    In this version 'Queue Processing' option in WE20 is missing and transaction WE85 is also not available.
    thanks & regards
    Piyali

    HI Piyali,
    Check out these links. THey will surely help...
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE2/BCFESDE2.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE5/BCFESDE5.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESRFC/BCFESRFC.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE4/BCFESDE4.pdf
    Re: SM59
    If you find this answer useful, please reward me for the same.
    Good luck
    Karthik Potharaju

  • Inbound Processing of Idocs with status other than success

    Hi,
           I am new to ALE/Idocs. Can anyone  please let me know how can I process the Idocs which have the status other than 53.
    Thanks &  Regards,
    Indira

    Hi,
    In addition to the previous posts few more programs to process failed inbound IDocs are as mentioned below.
    - Use program RBDAGAIE to process edited IDocs (IDocs with status 69)
    - Use program RBDAPP01 to process IDocs failing with serialization issue (IDocs with status 66)
    - Use program RBDAGAI2 to process IDocs after ALE inbound error (IDocs with status 56, 61, 63, 65)
    ~ Bineah

  • Urgent help required : Batch processing error of an inbound idoc

    hi,
       i have a problem while posting an idoc to the GL(FB01).
    i'm using an Inbound idoc message type : ACC_GL_POSTING
    idoc type : ACC_GL_POSTING01.
    Process code : BAPI.
    In the transaction code OBA7 i have enabled a particular document type as BATCH INPUT ONLY.
    i have set the option " Trigger by background program" in the partner profile (we20).
    while testing the process i'm getting the error "Document type -- is only defined for batch input".
    how can i overcome this error? can idocs be used to post for transaction that are batch enabled . plz help me.
    with regards.
    T.Jeyagopi.

    Jeyagopi,
    There are different types of Data loading into SAP.
    BATCH INPUT / BDC / IDOC / BAPI etc. BATCH INPUT are standard programs that take the data and update SAP. I don't think that is same as batch processing of IDOC.
    You might want to remove the setting of batch input, retain the batch processing in WE20 and try it out.
    In my opinion it should work.
    Regards,
    Ravi
    Note : Please reward points for the posts that help you.

  • Runtime Error: How to Reprocess File-XI-IDoc scenario

    Hi All,
    I'm working a file adapter to XI to IDoc scenario.  My XI message has about 2,000 records in it and one of those records contains an error (due to an invalid character in a description).  My question is in a production environment would it be somehow possible for me to reprocess this erred message and post the remaining 1,999 records that do not have an invalid character?  What are my options to progress?

    Thanks Bhavesh,
    Not sure what additional details you need but I'll give it a go.  I've got an input file that contains lets say 100,000 rows of data and each row is a separate record.  I use sender file adapter using file content conversion with fixed length definition.  I send that through a simple mapping program that will generate 100,000 IDocs.  I'll get 50 XI messages each containing 2,000 records (recordsets per message)
    Because of an invalid character in the source file (an "escape" character) in SXMB_MONI I get a red flag.  The error message is essentially "com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x1b".
    Since the XI message errors none of the IDocs for the 2,000 records in that message gets created even though 1,999 of them are OK.
    So my question is basically is there a way for me to restart this message via SXMB_MONI (or another way) so the other 1,999 records will process OK leaving me with the error to deal with later?
    Thanks again!

  • AES filing error - Idoc Outbound Processing: EDI number cannot be compiled

    Hi Gurus,
    We are configuring the AES filing.
    we've done the EDI  configI and initally we got the error that EDI partner is not maintained. As per the suggestions from this Forum we've added the cusoms office details in geography tab.
    Now when we are trying to process the same, we are getting the error "Idoc Outbound Processing: EDI number cannot be compiled"
    All suggestions are welcome.........
    Thanks in Advance.

    Hi Shiva,
    Here goes the solution: you need to maintain the Number of the Number Ranges starting with "10" and this applies only to GTS system as this is HARD-CODED in the Program, apart from 10 any number of the number range will result in an "EDI Number Range compilation" error.
    Cheers
    Harsha

  • Process overdue error:Idocs inflow BW

    Hi All,
    When we are scheduling an infopackage we are encountering an error as "Process is overdue" and also says Idocs inflow BW.In the status tab we are finding the following details:
    Non-updated Idocs found in Business Information Warehouse
    Diagnosis
    IDocs were found in the ALE inbox for Business Information Warehouse that are not updated.
    Processing is overdue.
    Error correction:
    Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
    When we go to <b>Detail tab</b> we found red status in the extraction itself as:
    Extraction (messages): Missing messages
    If we are going for manual updation of the IDOCs by process manually we get :Data packets were found that have not yet been read
    Data packets have to be processed manually
    and finally we recieve a message as
    You can only process data idocs in simulated form in warehouse.
    How to go about resolving this issue.

    Hi,
    Try this
    solution to these kind of problem is to use your mouse to click on every possible drill down field/line
    You can use We05/We02 ..a lot many other Xns to see the status and actual error message associated.
    But as I said use drill down & find the real error.
    Re: ALE IDOC inbound processing
    Regards
    Siddhu
    Message was edited by: sidhartha

  • How i will resolve beyond it subscript error

    how i will resolve beyond it subscript error in nested table .
    can any body give some example.
    please help me

    1-
    Before actually using the record in your process, you can test to verify its' existance:
    if v_nested_table.exists(n)=true then
    <<process>>
    end if;
    2-
    You can verify with a loop:
    for x in v_nested_table.first..v_nested_table.last loop
    <<process>>
    end loop;

  • How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

    How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

    Hi csreddy, 
    If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    http://support.apple.com/en-us/HT204204
    Update your device using iTunes
    If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
    Install the latest version of iTunes on your computer.
    Plug in your device to your computer.
    In iTunes, select your device.
    In the Summary pane, click Check for Update. 
    Click Download and Update.
    If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
    Find out what to do if you get other error messages while updating your device.
    Last Modified: Jan 12, 2015
    Apple - Find Locations
    https://locate.apple.com
    Contact Apple for support and service - Apple Support
    http://support.apple.com/en-us/HT201232
    Regards,
    - Judy

  • How to fix this error "The error occurred while processing a command of type 'setState' in plug-in 'servermgr_netboot'."

    I received this alert while configurating the OS X Server. But i don't know how to fix the error.
    Thank's
    lzraeder

    Hope this helps.
    I have been messing around with Mt Lion Server last day or so. Different than Lion Server, more refined, more sreamlined.
    I got this same error message when trying to enable and setup NetRestore / NetInstall.
    Looks like when one is using Wi-Fi as the network interface, you get this error. I suspected this.
    Not sure if this is a bug or Apple wants people to use Ethernet only, if so why give a choice, probably a bug.
    I have succefully used NetRestotre Lion server on a 2011 Mac Mini, worked perfectly. Then I remembered, I was using wired Ethernet, as I suspect most servers would use a wired network connection.
    MT Lion Server NetRestore / NetInstall works if you use Ethernet, and turn off Wi-Fi. Ethernet will actually show up as a selectable option under Access > Settings > Enable NetInstall Setttings On.., and you click Edit, and can check enable Ethernet.
    Once I did that the error went away. Then you get another message, if you do not have a NetRestore (in my case) image in the proper path, which you can set. I always like to do this away from the the boot volume, saves space, etc.
    You have to manually copy the .nbi folder you created with System Image Util. It seems Apple could have gone the extra step and included that in the Server GUI.
    No more Workgroup Manager, Server Admin, and the other dozen apps it tooks to admin server. Some are complaining. I for one like it very much. Always thought it was somewhat stupid and lazy of Apple to have that functionality across several apps. It was always un Apple like. It should be One App. I like what the Server app is now.
    Managing users, groups, shares, services is so much better, and refined, consolidated. Makes so much more sense.
    (Local User, Local Network User), you actually know clearly what type of user you are loooking at. WGM was IMHO a nightmare to navigate, it was schizophrenic (left over from NeXT I surmise).
    And of course one can go to the CL for all sorts of deep things like dns, changeip, dscl, odutil, etc. It's all there.
    john

  • Error while processing inbound Idoc (HRMDA_07) with FM IDOC_INPUT_HRMD

    Hello,
    I have a inbound Idoc of type HRMD_A (basistype  HRMD_A07) which is processed by Function module (FM)  IDOC_INPUT_HRMD with  proofing. After processing an Idoc the status Monitor for ALE messages (BD87) tell me that my Idoc has status 53, which should be the result i would like to have.
    Unfortunately when i go to transaction PA20 and check the infotypes, i see that infotype 0302 isn't created. When analyzing this problem i see that during the processing the Infotypes are posted with HR_MAINTAIN_MASTERDATA (dialog mode is 0 and luw_mode = 0 from include LRHA2F02 FORM save_pa_pb_infty)  When this is done for infotype 0302 sy-subrc <> 0 the message is A complex application error has occured. This error message is placed in Export parameters
    Return and Return1
    of HR_MAINTAIN_MASTERDATA. When the program returns to the calling Form it checks if there is message of type E in HR_RETURN (see below) :
    CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
              EXPORTING
                pernr                          = ins_objects-objid       "#EC DOM_EQUAL
                actio                           = 'INS'
                tclas                           = tclas
                dialog_mode               = dial_mode
                luw_mode                  = '0'
                no_existence_check = $cross
                no_enqueue              = $cross
              IMPORTING
                return1                       = return
                hr_return                    = hr_return
              TABLES
                proposed_values    = proposed_values.
            REFRESH proposed_values.
         IF hr_return-msgty = 'E'.                           "note 984409
          CLEAR protocol_error.
          protocol_error-msgty  = hr_return-msgty.
          protocol_error-msgid  = hr_return-msgid.
          protocol_error-msgno  = hr_return-msgno.
          protocol_error-msgv1  = hr_return-msgv1.
          protocol_error-msgv2  = hr_return-msgv2.
          protocol_error-msgv3  = hr_return-msgv3.
          protocol_error-msgv4  = hr_return-msgv4.
          READ TABLE t_hrobjinfty WITH KEY objid = hr_return-pernr
                                           infty = hr_return-infty
                                           subty = hr_return-subty.
          protocol_error-segnum = t_hrobjinfty-segnum.
          protocol_error-routid = 'create_prf_pa_pb_object'
    As mentioned above, the error message is only placed in the parameters Return and Return1  and not in HR_RETURN.please read the first reply

    Hi,
    I think you have preety much done from your end itself .
    Could you please tell me what you got in this parameters:
         protocol_error-msgty  = hr_return-msgty.
          protocol_error-msgid  = hr_return-msgid.
          protocol_error-msgno  = hr_return-msgno.
          protocol_error-msgv1  = hr_return-msgv1.
          protocol_error-msgv2  = hr_return-msgv2.
          protocol_error-msgv3  = hr_return-msgv3.
          protocol_error-msgv4  = hr_return-msgv4.
    It may help us to track down the issue in more better way .
    Thanks!

  • XI-- IDOC scenario, how to link process code with function module

    Hi Forum,
    I have a XI--->IDOC (R/3) scenario,
    where i m creating a IDOC in XI and sending it to R/3,
    i have done all settings to send the IDOC from XI to the R/3,
    i also have the function module to process that IDOC in R/3,
    the problem is:
    I want to know in details (step by step) how to make a Idoc Inbound process code, link it with the function module and use the process code in the Partner Profile in R/3,
    pls help

    HI,
    FOr this u need to go to transaction WE41 for inbound and WE40 for outbound there u assign the function module.
    Now u go to WE20 transaction for partner profile and u can assign the proces code to the inbound message.
    Go to the below help for more information:
    http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
    Inbound process code:
    http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
    Thnx
    Chirag

  • HT4623 I can not get connected to App Store , download or update any apps,  EVEN I DID RESET ALL SETTING , STILL I RECIEVE A MESSAGE says: YOUR REQUEST IS NOT PROCESSED ,ERROR COD: 109 !! WHAT DOSE IT MEAN? HOW CAN I SOLVE THE PROBLEM??

    I can not get connected to AppStore , DOWNLOAD OR UPDATE ANY OF MY APPS , WHEN I GO FOR INSTALLING , THE MESSAGE SAYS: YOIR REQUEST IS NOT PROCESSED ,  ERROR CODE, 1009!!! HOW CAN I SOLVE THIS PROBLEM??

    Try contacting the iTunes support staff, they do the app store also, at:  http://www.apple.com/emea/support/itunes/contact.html

Maybe you are looking for