How will come back 5th list to 3rd list in interactive reporting

hi all,
which of this code is correct to comeback 5th to 3rd list
at user-command.
case sy-ucomm.
when 'back'.
if sy-lsind = 5.
sy-lsind = 3.
endif.
endcase.
or
at user-command.
case sy-ucomm.
when 'back'.
if sy-lsind = 5.
sy-lsind = 2.
endif.
endcase.
thanks in advance

hi friend,
try out this code: normal list..i think second one will be the correct one..
START-OF-SELECTION.
WRITE: 'Basic List, SY-LSIND =', sy-lsind.
AT LINE-SELECTION.
WRITE: 'Secondary List, SY-LSIND =', sy-lsind.
if sy-lsind = 5.
sy-lsind = 2.
endif.
thanks
jaideep
if useful reward points..

Similar Messages

If I remove itunes and its drivers from my computer, as recommended by someone at the Apple store for a problem I'm having, I know my music will come back, but will my playlists still be there as they are now?

If I remove itunes and its drivers from my computer, as recommended by someone at the Apple store for a problem I'm having, I know my music will come back, but will my playlists still be there as they are now? I forgot to ask.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

A few days ago i bought the macbook pro in a Providence. In late Summer i will come back to my Country - Ukraine. I would like to know about a tax for my laptop. Can i return tax? Through the TAX FREE or return in airport? What should i do?

A few days ago i bought the macbook pro in a Providence. In late Summer i will come back to my Country - Ukraine. I would like to know about a tax for my
laptop. Can i return tax? Through the TAX FREE or return in airport? What should i do?

You need to talk with the tax authorities in the countries to which you traveled and that of your home country. We are all end-users liek you and not Apple agents.

HT4623 Both my iPad and iPhone have a message "Cannot get mail" The connection to server failed. I wen to the Apple store today and he could not do anything. Said maybe it will come back by itself. It has been 36 hours and nothing has happened. Help!!!

I have not been able to connect to the internet on my iPhone and iPad the past 36 hours.Went to the Apple store today and he said that maybe it will come back on it's own. That is the first time that I have been to the apple store with a disappointing resolve. Please help, there has to be an answer?

Your post says you have an iPhone 3G. Is it running iOS 4.2.1, which is the latest iOS it can run? Even if so, it's now quite old (nearly five years). That could be part of the problem.
Anyway, maybe you should delete your mail account (Settings >> Mail, Contacts, Calendars -- if it was still called that back in the iOS 4.2.1 days), and start over.
Here's the Mail Setup Assistant to help you do that:
iPhone Email Setup

Volume control: I cannot change the volume using the keyboard of my Macbook. I have to go into preference. How to come back to the keyboard controler.

I cannot change the volume using the keyboard of my Macbook. I have to go into preference. How to come back to the keyboard controler.

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

HOW WILL I BACK UP MY ITUNES LIBRARY TO HARDDRIVE SO I CAN FREE UP SOME SPACE IN MY MAC?

Hi!
My mac is running low in memory space and mostly of the bigger occupants of my laptop are my music collection. Therefore, i want to back it up or transfer it to my external hard drive so i can free up some space. And just play it when connected to my external hard drive. How will i do it?
Also is there a short cut for deleting duplicate songs in my itunes.
Please help thanks.

iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
Note that moving your library to another drive is not "backing up". Backing up is making a second (or more) copy of your files onto another drive because you know that some day, without warning, your hard drive will suddenly refuse to work or get stolen and you will be sooo happy you spent the $100 in getting a backup drive which will have saved all your files (such as irreplaceable photos).
How to find and remove duplicate items in your iTunes library - http://support.apple.com/kb/HT2905
http://dougscripts.com/itunes/itinfo/dupin.php (commercial)
Posts by turingtest2 about different types of duplicates and techniques- https://discussions.apple.com/thread/3555601 and https://discussions.apple.com/message/16042406 (Note: The DeDuper script is for Windows)
I would do it manually. As you can see from turingtest2's post, some duplicates are not really duplicates.

How to set default number of records shown in an interactive report table?

How can I set the default number of rows shown on an interactive report?
The default seems to be 15, I can't find where this can be changed.

Hi John,
When you're logged into the development interface, run the page with the IR. Set the rows from 15 to 5 (for example) and click "GO". Now click on the Actions Menu icon (the green gear), click "Save Report". "Save as: As default report settings". Click Apply and your rows will be set.
Martin
[http://apex-smb.blogspot.com/]

How to wrap a Column (Increase/Decrease column width) in Interactive Report

Hi,
I have a Interactive Report and I want to wrap the column values.
Also want to increase/decrease width of the columns..
I have 2 columns say.. Description and List
List - aaaaaaa, bbbbbbb, hhhhhhh, nnnnnnn, 222222, 55555555, 77777777, ..... // list of values are seperated by ,
         // 1. want to wrap the values ..I mean to decrease the width
Descriptiopn - sdgssdjkllkkkkkkkk // -- here I want to increase the width of column
                 dgdggdfgdfgdgg
                 dfgdfgdfdfggfdg
                 dgdgdgdgdgdf2ndly for the List Column, can I put the sepearte values in each Line (values are seperated by , here) - ROW will only one.
For each ROW, I want to display List column as shown below.
      List - aaaaaaa
        bbbbbbb
        hhhhhhh
        nnnnnnn
        222222
IS this possible in Interactive Report??
Thanks,
Deepak
Edited by: Deepak_J on Feb 23, 2010 4:14 PM

Actually, I want to increase/decrease the column width in Interactive Report.
As shown the in the example of Description field...it's coming in 4-5 lines.
I want to increase the width of Description column..so that it should come only in 2 lines..
thanks,
deepak
Edited by: Deepak_J on Feb 23, 2010 4:32 PM

How to show only filtered rows in download file of Interactive report

I have an interactive report.
If i filter column A and don't want to show column A in the download spreadsheet or PDF(NVL(:REQUEST,'column A') NOT IN('XLS','PDF'). All of the rows will show up in my download file. How could i show just filtered rows in the download file and also don't show the filter column?
Thanks,
Jen
Edited by: Jen Hu on Nov 22, 2010 2:54 PM

HI,
For example your model node is CountryModelNode and the value node binded to table is CountryValueNode then:
int sizeCountryModelNode=wdContext.nodeCountryModelNode().size();
for(int iCount=0;iCount<sizeCountryModelNode;iCount++)
   if("IN".equalsIgnorecase(wdContext.nodeCountryModelNode().getCountryModelNodeElementAt(iCount).getCountryCode())
   || "US".equalsIgnorecase(wdContext.nodeCountryModelNode().getCountryModelNodeElementAt(iCount).getCountryCode()))
    IPrivateCountryValueNode.ICountryValueNodeElement element=wdContext.createCountryValueNodeElement();
    element.setCountryCode(wdContext.nodeCountryModelNode().getCountryModelNodeElementAt(iCount).getCountryCode());
    element.setCountryName(wdContext.nodeCountryModelNode().getCountryModelNodeElementAt(iCount).getCountryName());
   wdContext.nodeCountryValueNode().addElement(element);
Note: Bind CountryValueNode to the table:
Regards,
Charan

How to use an Aggregate in a Computation on an Interactive Report?

version 4.0.2.00.07
Hello,
I'm trying to create a computation on an Interactive Report from the Actions menu to compute a percentage.
I have two Status columns, one for open and one for closed. I have to count the number of open and count the number of closed and then divide the two.
I created an aggregate, count, on the open status and closed status, but how to use them in the computation? There's no 'count' in the Function list in the Compute box.
I was hoping that those aggregated columns would be displayed in the Compute sub-menu on the Actions button but they don't appear to be.
Can someone help me with this?
Thanks,
Joe

Maybe an alternative would be to put this logic into the select.
select u.object_name,
       u.object_type,
       count(case when u.object_type = 'TABLE' then 1 end) over () count_tables,
       count(case when u.object_type = 'VIEW' then 1 end) over () count_views
from user_objects u;This would count the number of tables and views in the data dictionary. And it is returned as a column value.

How to create a link to a unix document in interactive report??

on the same UNIX server where APEX 4.2 is installed I have a directory with pdf documents - /d01/apex/docs/mydoc.pdf for example.
How can I create a link in APEX interactive report to point to the document and allow users to view or download on their PC's?
Thanks.

Hello,
In your report source, you should use something similar to:
Select empno , ....., '<a href= "#IMAGE_PREFIX# ........" >' Download from server '</a>' as "Download" from empWhere #IMAGE_PREFIX# stands for Static resources "i" in your web server. it should be in your case (for Windows):
C:\apex\imagesYou may need to use CASE Clause for multiple Docs
Please see this example:
http://apex.oracle.com/pls/apex/f?p=63066
worksapce: somefeto
user: test
pwd: test
Regards,
Fateh
Edited by: Fateh on Oct 24, 2012 11:35 PM

How to develop a Chart from Actions button of an Interactive Report ???????

Hi
I am trying to implement a chart from Actions button of an Interactive Report through frond end. I am getting the Flash Security error for this. I know we have to change the HOST variable for this. But i am not sure where exactly I do this. For a normal Flash Chart , i know that we have to do in the Region Source but for a chart from Interactive Report what do I do??????????
Thanks
Shruthi.

Hi
It seems you are using EPG.
Replacing #HOST# works for flash charts which you create yourself but I don't think you can do it for the charts generated by Interactive Reports. To fix this issue you either need to update host variable of EPG or the best is to use Apex Listener.
I would recommend you to use Apex Listener as it will avoid further issues if you use a Reverse Proxy with your Apex Server such as Lighttpd or Apache and use multiple Virtual Hosts etc.
To install Apex Listener see http://download.oracle.com/otn/java/appexpress/1.1/docs/AELIG/E21058_01.pdf?AuthParam=1324310446_77b28dc5a93555586fc93c0c8804e8de
You can use Stand Alone mode with Apex Listener as it is easy to very configure.
Zulqarnain
MaxApex Hosting
http://www.maxapex.com

How to know a table column name in HTML (Hyperion Interactive Reporting).

Hello,
I have a Hyperion Interactive Reporting dashboard section with an embembed table section on it.
The dashboard it will be open only in HTML.
I put the table as Active, so i can interact with her.
So, what I need to know now is how can I know the column name or number when I double click in one cell of the table.
Can anyone help me with this?
Thank you in advance,
Carlos

Views don't have primary keys though their underlying tables might. You'd need to pick apart the view to determine where it's columns are coming from.
You can select the text of the view in question from user_views.

How to change the color of 1px_trans.gif image of interactive report

Hi All,
Iam using interactive report in apex3.2
I need to change the color of 1px_trans.gif or remove the image in search tool bar
where we can change.
pls tell me .......
Thanks & regards
Balu..

I need to change the color of 1px_trans.gif or remove the image in search tool bar 1px_trans.gif is transparent and doesn't have a colour. It is used as a shim image—an outdated way of controlling the dimension(s) of some element(s). It's intended to be invisible. Giving it colour will cause it to become visible, resulting in all sorts of unexpected and unwanted lines (or worse, solid areas of colour) appearing throughout applications.
What do you think you want to do? (Whatever that is, it will almost certainly not be achieved by changing the colour of 1px_trans.gif...)

How will come back 5th list to 3rd list in interactive reporting

Similar Messages

Maybe you are looking for