Howto add user role in OID for PORTAL use from wihtin SSO SERVER plugin

Hi all,
Can someone help me with this issue:
I'm developing a custom authentication module for SSO Server. From this plugin I would like to set the roles/groups to which that user belongs, before the redirect to the Portal is done.
I'm adding the user attributes to the OID via the DirContext.modifyAttributes(..) method from within the plugin. However I don't know how to add the roles/group definition to the user entry in the OID so that Oracle Portal can show a personalized desktop when the user logs on.
Hope someone can point me in the right direction.
Many thanks in advance!
Kind regards,
Chris

Chris ,
Do you know how to get user role in OID? Did you fix this issue. i have same job in this point.
Thanks

Similar Messages

  • PROBLEMS INTEGRATING OID PLUG-IN FRAMEWORK SOLUTION WITH SSO SERVER

    I wrote a OID plug-in to authenticated against an external
    password store as suggested in chapter 27 of the Oracle Internet
    Directory Administer's Guide., release 9.0.2.
    The function works if I run an ldap-bind from the command, the password
    is checked against the external password store, and copied into the OID.
    The function doesn't work from the SSO server, It will authenticate against
    the password contained in the OID rather than the password contained in the
    external password store, if there is a difference.
    I think the reason for this is probably that SSO uses indirect (proxy)
    access to the password store instead of Direct Authentication, as
    described in chapter 11 of the OID administrators guide.
    Does anyone know if it is possible to change the
    authentication method of the SSO server from
    indirect to direct?
    Thanks,

    -cont.
    orclPluginName=OID_WSL_PLUGIN
    orclPluginType=operational
    orclPluginTiming=when
    orclPluginLDAPOperation=ldapcompare
    orclPluginEnable=1
    orclPluginSubscriberDNList=cn=users,dc=localhost,dc=com;dc=localhost,dc=com;o=localhost,dc=com;
    orclPluginVersion=1.0.1
    orclPluginIsReplace=1
    cn=when_compare_replace
    orclPluginKind=PLSQL
    Using the ldapadd command-line tool:
    ldapadd –p 4031 –h localhost –D cn=orcladmin –w security007 –v –f when_compare_replace.ldif
    and restart the Oracle Internet Directory server and AS too.
    4)and tested the plugin with login requests to the OID server and made some calls using ldapcompare tool like:
    ldapcompare -p 4031 -h localhost -D cn=orcladmin -w security9 -b "cn=userA,cn=users,dc=localhost,dc=com"
    -a title -v manager
    but the log table was never filled with the parameter values.
    Does this framework stuff ever work? Is it possible to replace the password comparison of OID?????
    Is my ldif file correct? Is it the way it should deploy/register? Can you tell my were i am wrong? any help is greatly appreciated...

  • How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

    How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
    Thanks in Advance
    NTRao

    Hi,
    There are numerous ways to change the cache size.
    You could deploy a vbscript to a collection of the devices.
    On Error Resume Next
    Dim UIResManager
    Dim Cache
    Dim CacheSize
    CacheSize=20000
    Set UIResManager = createobject("UIResource.UIResourceMgr")
    Set Cache=UIResManager.GetCacheInfo()
    Cache.TotalSize=CacheSize
    Or you could use a configuration item.
    http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
    You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
    http://www.nowmicro.com/recast/right-click-tools/
    http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
    select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
    https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

  • ABAP User Roles and Query for accessing particular T- codes and Reports

    dear Gurus
    I have one problem, i want to know about ABAP User Query ,i have one requirement my user wants to Lock all the HR Std versus Customized reports in T- code SQ01,other department peoples also see the Payslips and Hr personal reports which is harmfull to the dept so i want to Lock all the reports in Std T- code in SQ01 and i have created one Customized User Roles or Query in which the T-codes and Reports are assigned only those particular user can access the T-codes and Std reports .how can it be possible i dont have any idea about user roles and Queries .
    kindly help me out or send me some documents related to user roles and queries
    regards ritesh sharma

    Hi Ritesh,
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/103cafc2-7a64-2b10-14b3-eddb7d324561
    Regards,
    Flavya

  • ICal falls short for enterprise use in an Exchange server environment

    (Cross posting from the "Using Mac OS X 10.6 Snow Leopard" discussion).
    I work at a very large software company on a team of people who all use Macs. We were thrilled to install Snow Leopard and begin using the new Exchange server features in Mail, Address Book and iCal. Sadly, though, some very rough edges on the iCal experience are making many people go back to running Entourage, or even Outlook in Parallels (ugh).
    Specifically, iCal does not allow you to control how and when notifications are sent when you edit an existing event. As a meeting organizer, if you make a change, such as adding a new attendee to a meeting that includes 40 other attendees already, all 40 of those existing attendees get a notification, forcing them to re-evaluate the meeting in their inboxes.
    There is no way to save a draft of a meeting invitation without sending it to the attendees. Often the chore of assembling the correct mix of attendees for a meeting takes significant time. If you are unable to complete the agenda or other planning aspects of the event in a single sitting, you must send the meeting as is, which is not a real option if your respect your colleagues time, because they will be receiving multiple updates to your meeting as you complete it.
    Declining a meeting automatically notifies the meeting organizer without giving the invitee a choice. This also creates a lot of unnecessary "noise" in peoples inboxes. Sometimes it is desirable, but not always- the ability to control notification is a very sensitive issue in the context of meeting etiquette.
    You cannot Reply, Reply All, or Forward a meeting calendar event from within iCal.
    There is no support for rich text in the meeting calendar event's "Notes" field - the field in iCal that is used to represent the meeting invitation email's body text. This strips out meaning and complicates the workflow for attending a meeting.
    Getting people to participate in collaborative work in large distributed organizations is a challenge as it is. We cannot afford to use tools that work against the goal. Apple, please hurry up and provide the rest of the features required to really USE an Exchange calendar client in an enterprise environment.

    "He also wants to get his calendar appointments and address book (contacts), but he doesn't want to use Entourage"
    You need to use GroupCal by Snerdware but we have found it not to be a really good product in our office. The address book has the ability to sync to exchange server many have indicated it doesn't work (Address Book/Preferences/General Tab/Sync with Exchange)
    You could try Thunderbird mail product not used that but I doubt any of the Tasks, To-Dos and Calendar come over...now Entourage used to be horrible with this sync but now with 11.3.6 (or whatever it is now) our users see calendar events, to-dos and the LDAP directory
    Though I am a Mac fan, still in a windows world you cannot be too choosy they should just use entourage for an outlook like product.
    NOTE do NOT go to Exchange 2007 tons of IMAP problems our Mac users are unable to get mail (and yet our Windows Admin could care less)
    good luck

  • SMS Provider for sending SMS from SAP BI server

    Hello,
    I need to send sms from sap bi server.
    Which service provider is preferable to use for sending sms?
    Any suggestions?

    You can opt for IDEA...............

  • How to create a new user id in OID for Oracle Collab suite File System

    Dear Friends,
    I want to know how to create a new user id in the oracle internet directory where i can use that user for the new subscription of the oracle collabration suite file system..
    Please do the needfull and thanks in advance...
    With warm regards
    R.Prasad

    Hi!
    The way you suggest should not be used.
    A CS user will be created as a normal OID user and will receive the CS attributes in a different subtree later during the provisioning.
    For creating CS users use oesuser and uniuser. Files provisioning will work in a different manner anyway.
    cu
    Andreas

  • How to add user defined F4 help for s LDB field?

    Hi,
         I am using PNPCE Logical Database for a program using the standard HR report category. But I want to have my own restricted F4 help for a particular field.Is it possible to override the standard LDB search help? I tried doing it , but I am getting a syntax error .
    Mahesh

    Hi Mahesh,
    I don't think so that you can attach a User defined F4 help in a standard LDB.
    What I would suggest is that you copy the standard LDB into Z LDB from SE80.
    Then go to the selection screen of the LDB and either try and attach a F4 help by writing the code in it OR
    Hide the field where you want to attach the F4 help with the keyword Exclude(you will have to check on the exact keyword).
    And add the same field in the selection screen of the report and define the F4 help.
    Do not forget to attach the Z LDB to your report by going to the Attributes.
    Please refer to the code below for attaching a generic F4 help to a select options:
    report zrich_0001 .
    data: begin of ihelp occurs 0,
    field type char10,
    ftext type char50,
    end of ihelp.
    data: a_field(20) type c.
    select-options s_field for a_field.
    initialization.
    ihelp-field = 'A'.
    ihelp-ftext = 'Description A'.
    append ihelp.
    ihelp-field = 'B'.
    ihelp-ftext = 'Description B'.
    append ihelp.
    ihelp-field = 'C'.
    ihelp-ftext = 'Description C'.
    append ihelp.
    at selection-screen on value-request for s_field-low.
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
    retfield = 'FIELD'
    dynprofield = 'S_FIELD'
    dynpprog = sy-cprog
    dynpnr = sy-dynnr
    value_org = 'S'
    tables
    value_tab = ihelp.
    start-of-selection.
    In case you have any further clarifications,do let me know.
    Regards,
    Puneet Jhari.

  • Not able to add user into Dataset Group  for RACF

    Hi,
    I am trying to add a RACF user to a dataset.I am getting following error message in log file. Pls. help
    2011-05-27 03:15:04,740 ERROR (http-0.0.0.0-8080-7) [XELLERATE.APIS] Class/Method: tcFormInstanceOperationsBean/addProcessFormChildData encounter some problems: maoErrors:Cannot schedule a task for child table change, schedule item save failed
    2011-05-27 03:15:04,740 ERROR (http-0.0.0.0-8080-7) [XELLERATE.APIS] Class/Method: tcFormInstanceOperationsBean/addProcessFormChildData encounter some problems: Error occurred while validating password policy '
    2011-05-27 03:15:04,740 ERROR (http-0.0.0.0-8080-7) [XELLERATE.APIS] Class/Method: tcFormInstanceOperationsBean/addProcessFormChildData encounter some problems: Cannot schedule a task for child table change, schedule item save failed
    Thor.API.Exceptions.tcAPIException: Cannot schedule a task for child table change, schedule item save failed
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(Unknown Source)
         at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.addProcessFormChildData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
         at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
         at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
         at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
         at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
         at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
         at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
         at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
         at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
         at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
         at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
         at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
         at org.jboss.ejb.Container.invoke(Container.java:960)
         at sun.reflect.GeneratedMethodAccessor123.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
         at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
         at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
         at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
         at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
         at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
         at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
         at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
         at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
         at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
         at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
         at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
         at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
         at $Proxy758.addProcessFormChildData(Unknown Source)
         at Thor.API.Operations.tcFormInstanceOperationsClient.addProcessFormChildData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy804.addProcessFormChildData(Unknown Source)
         at com.thortech.xl.webclient.actions.UserDefinedFormAction.addChildFormData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
         at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
         at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
         at java.lang.Thread.run(Thread.java:619)
    2011-05-27 03:15:04,740 DEBUG (http-0.0.0.0-8080-7) [XELLERATE.SERVER] Class/Method: tcDataBase/eventPreInsert entered.
    2011-05-27 03:15:04,740 DEBUG (http-0.0.0.0-8080-7) [XELLERATE.SERVER] Class/Method: tcDataBase/tcDataBase left.
    2011-05-27 03:15:04,740 DEBUG (http-0.0.0.0-8080-7) [XELLERATE.SERVER] Class/Method: tcDataBase/eventPreInsert entered.
    2011-05-27 03:15:04,740 DEBUG (http-0.0.0.0-8080-7) [XELLERATE.SERVER] Class/Method: tcDataBase/tcDataBase left.
    2011-05-27 03:15:04,740 ERROR (http-0.0.0.0-8080-7) [XELLERATE.WEBAPP] Class/Method: UserDefinedFormAction/addChildFormData encounter some problems: Cannot schedule a task for child table change, schedule item save failed
    Thor.API.Exceptions.tcAPIException: Cannot schedule a task for child table change, schedule item save failed
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(Unknown Source)
         at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.addProcessFormChildData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)     
         at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    Edited by: JRS on May 27, 2011 2:19 AM

    Follow:
    OIM: Getting an error when trying to add entry into child table
    http://kr.forums.oracle.com/forums/thread.jspa?threadID=1066123&tstart=1365

  • User roles were deleted for the mass change in CUA system.

    Dear Team,
    I have assigned a role to a set of users in CUA via SU10 to a specific child system, as like I have executed the task 3 to 4 times for the assignment of the different roles to a set of users and some users may repeated in each execution .
    And when I check in child system after few hours the old roles were deleted and contains the role which I have assigned in the mass change.
    It was happened only to few users not more than 20 users, then I expected that may be the users who get repeated in SU10 more than one time for the different role assignment it get impacted.
    But that is not a problem, because I verified some of the users who repeated more than one time in child system and they didnu2019t get deleted  the old roles and it was appended with the new role to the existing rights of the user.
    Still some of the IDOC were showing in SCUL transaction with Yellow signal triangle shape
    So please help me out what would be the issue.
    Kindly let me know if need more information....
    SV

    Hi,
    It is a problem related to IDOC issue. Please contact Basis Team regarding pushing of the Idocs. I am giving an over view of the steps that needs to be executed for idoc push. Please contact Basis with the same.
    Run RBDAGAIN report (se38)
    Give Idocs and save as variant.
    Now go to sm36 specify a job name and start.
    This will change the Idoc status from 02 to 30. For 03 to 30 it needs a different report. Please check and let me know if any issue. As long as idocs are not pushed properly it will give an error. At times also check the CUA user is ok or not. It gets locked at times. To know which one is the CUA user->Login to child system->su01->See the change executed by the user->Get the user name.
    Let me know if any issue.
    Regards
    Aveek.

  • Add user exit to ZRGGBS000 for transaction AS02

    Hello,
    I have added a new form to ZRGGBS000 for updating the tax jurisdiction whenever the cost center changes on the asset master record.  In the img I cannot get the substitutions node to recognize my new form. I keep getting the message that the new form is not declared in the form pool.  I have saved and activated the program. Can anyone please point me in the right direction?
    Thanks,
    Jereme

    Hello again Debasish,
    I have added the code to update the jurisdiction field for the user exit.  However, when I access the asset master and change the cost center and save the code is never executed.  Is there a step or setup procedure that I am missing? 
    Thanks,
    Jereme

  • User roles!despersate for help!!!

    Basically we are setting up the IPC AND CRM IDES version4.0 which we have done sucessfully integerating with XML.We need to create users for ISA CRM.We are looking for the UME Configuration and steps involved in it.Your help will be highly appreciated.
    Cheers
    Gareth

    There is  a read/write permissions service in the Content Services category in workbench that will allow you to control the access to the space or th efile that you write intp CS.
    Paul

  • Howto add user to group without logout/login

    Hi All,
    Sometimes I have o add myself to a group in order to get access to a file.
    # usermod -a -G video cedric
    Before I can actually get access to the file, I have to logout and login. I have figured out I can avoid it by doing this:
    # su
    # usermod -a -G video cedric
    # su cedric
    $ now I can access the file
    Is there a way to update the rights without the logout / login?
    Best regards,
    Cedric

    Using the newgrp command will start a new environment with the group membership.

  • Problem with ERP User Role: Cant do Bank Reconciliation using SM35 Pls help

    Hi Everyone,
    I'm having soem problems. A user can upload the electronic bank statement (MT940 format) using FF_5 however when they attempt to process it using SM35 the file is not there.
    I think we might be missing an authorisation object or something that stops the bank file from being transported to the processing function SM35 but I dont know what the missing object is or how to correct it.
    If you can help - please do!
    Many many thanks!
    Ciara

    Hi Andrew,
    I'm able to run the programs as I have access to SAP ALL, I traced myself running the program (ST01) but cant make sense of the report to work out what's missing.
    I'll try running the same trace for the user that is mising the authorisation objects to see what the difference is.
    Thanks so much for your response - you obviously understood my question!
    Much appreciated
    Ciara

  • How to add user information list in site page using out of box

    Hi,
        Kindly suggest me any solutions or reference links regarding adding user information list in one of the site pages using out of box.
    Thanks
    Razvi444

    Hello Razvi444,
    it is not clear what you are trying to accomplish, but for your information User Information List could be find under <your_site>/_layouts/15/people.aspx?MembershipGroupId=0. If you would
    like to display all user on the page you need to develop a custom web part and using the aforementioned URL all user could be displayed on your page.
    Or you could also edit the page and insert a link (/_layouts/15/people.aspx?MembershipGroupId=0), set a description. SharePoint will name it people.aspx. After that you could "Edit Source" and rename it accordingly.
    Let me know if this one is helpful.
    Enjoy!

Maybe you are looking for