HOWTO: Fix beta 7 SDK provisioning/device errors.

Okay, through trial and error, I have determined:
1) Provisioning profiles have to be regenerated; ones generated yesterday or this morning are corrupted.
2) Apparently, your app ID must now be only three dot-levels deep. I.e., if you have 'com.mycompany.foo' on Mac OS X, you cannot name your app ID 'com.mycompany.foo.mobile' -- you will need to do 'com.mycompany.mobilefoo' or whatever. (This was the one that got me, and took me quite a while to figure out.)
3) Your app ID and the bundle ID in the target properties of Xcode must be identical, to the character. So if you have 'com.mycompany.*' as an app ID, you will need to set the bundle ID to 'com.mycompany.*' rather than 'com.mycompany.mobilefoo'
4) You will need to go re-select the code signing profile in Xcode before rebuilding for devices under beta 7.
5) You MAY (I didn't, but others did) have to change your code signing identity to be just 'iPhone Developer' instead of 'iPhone Developer: Firstname Lastname'
Hopefully this helps folks!
Message was edited by: RainPacket

jamois
Maybe I can help if you are still stuck. I figured it out with your help, so maybe I can help a bit.
I first grabbed my new provisioning information about about 8pm on the10th, so maybe I got good provisioning files. My provisioning identifier is 4 long xxxx.com.myco.myapp but following other's advice on this chain. Here is all I had to do:
1) I entered com.myco.myapp into my plist bundle identifer
2) In the Build configuration of the Project Info, I
a) Used my name in the Code Signing Identity field. I used the same name as I was told to use in the provisioning Certificates:
http://developer.apple.com/iphone/manage/certificates/team/index.action
b) I selected the proper provisioning profile from the Code Signing Provisioning Profile selector field.
c) That automatically selected the same profile in the Any iPhone Device selector field.
I compiled and it ran.
I figured out the last steps by reviewing this information:
http://developer.apple.com/iphone/manage/overview/development.action
Hope this helps
Joe
www.softwareops.com

Similar Messages

"Unable to provision your device' error when tryin...

Can someone please help! I 'upgraded' to v40 firmware for my Nokia 5800 and lost my contacts. I am trying to sync it with Ovi.com but when I try to SMS the settings the site (not the phone) gives and error 'unable to provision device'. I can't even find a way to enter sync settings manually. Please help!

Same problem here, except that I don't know if it was working before because it's the first time I try the service.
I DO get the SMS from OVI on my phone, but when I open it, it asks for a "Configuration settings PIN" which I don't have.
Immediately after I receive the SMS I get on the webpage the same error you guys are receiving.
Don't know what's wrong.
Any clues anybody?
Cheers,
Luis

My iphone5s is dead...plugged it into computer to charge, and it says "internal device error" how can i fix....i already tried plugging it into all other ports

my iphone5s is dead...plugged it into computer to charge, and it says "internal device error" how can i fix....i already tried plugging it into all other ports

tried another computer?
if it works there then your itunes install have gotten defect

DEVICE ERROR 365- HARDWARE PROBLEM !!!!!

Hi all, thanks for you help.
1. I plugged my charger into my Blackberry 8900, return to it and the phone turns off.
2. I reset it- pulling the battery out, putting it back in.
3. It then says: DEVICE ERROR 365: RESET
4. I've tryed to reload the OS on my blackberry but my mac and bb desktop software says :Cannot connect to bb. So I cant update it..NOTHING !!!
5. I called the carrier of the phone - ORANGE. They say that device 365 is a hardware problem- need to buy a NEW blackberry -_________-.
Would I be able to send the phone to Blackberry for repair or to have it replaced ?.
PLEASE HELP....If there is a way to fix the hardware please help me.
Thank you

Ignore Orange for now. They should know better.
Follow the directions in this link below:
Article ID: KB10062 BlackBerry device error 365
Please post back your results or questions.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Beta 7 - Distribution Provision - Grey and unusable?

I have Beta 7 successfully using the Developer Provisioning, but when I regenerated the pieces needed for the Distribution Provisioning it generates one, lets me download it, but when I drag, drop it into XCode it appears greyed out and does not allow me to click on it. It also does not appear in the Build area for Xcode.
This is the first issue I've had in all 7 Betas like this.
Has anyone else gotten this to work and if so, how so?
This literally is the only thing between me and release. I am a bit nervous if I've screwed up the cert, the app_id, something else, but I've tried and retried with no success.

archeon7 wrote:
I already had the iPhone Distribution set, my problem was that when changing from B6 - B7 I had to create a new app_id. This new name used the '*' option and dropped the app name.
Not a bug per se, but more examples would have been helpful.
To fix the build problem - be sure the name of the app you use for the provision is the same com.company.* worked for me.
The Organizer still shows the dist. provision unusable, but the build is working so I can now build a distribution build. I can use the debug version for the device, I only need to submit the distribution version. This problem may be related to not having the device registered with the provision at the portal. Since there is no option to use a device for the distribution provision, it probably figures your provision can't be loaded on that device. makes sense, but it would have been more helpful to have this spelled out rather than cause a brief panic.
archeon7, thanks for the helpful post. so you are saying that just building a distribution version of one's app without installing it on a provisioned devices is all that we are meant to be doing at this poing? which would explain why the build & go is failing.
btw, are you (or anyone else here) able to upload your binary via the portal? i can only upload information about it and not the application itself.
thanks.

DVD Burn problem. "Device error - the target device isn't suitable for use"

Hello everyone,
I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
Just thought it was important to report success as well as failure!
However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
Justin.

OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
system meets minimum requirements
Project size does not exceed disk capacity
successfully burned project to DVD folder -thus skip to step 8.
8. Using new blank media for burning
9. Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
10. Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
11. Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
12. Disabled IMAPI CD burning COM
13. DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
14. Updated DVD firmware
15. Already updated nVidia drivers
16. Don't have any other DVD drives to disconnect.
17. MPEG workaround. Will resort to if required.
18. Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
19. Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
20. Visit forums to see if other have the same problem. Hi guys
So still working through some of the items above.
Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
What a process.
Stay tuned.
Justin.

I have a HP Laserjet 4345MFP with Device Errors in the log

I have an HP LaserJet 4345 MFP with Device Errors in my log, How do I resolve this issues. It is obvoisly not a Windows 7 issue, or a connectivitiy Issue, it is a machine issue, if you would like me to continue using HP products for my company I think you would be wise and fix your website so it will let me ask the questions I have about it so I can get a decent answer to help me resolve my issues. HP has the worst forums I've ever seen..
50 Jan-17-2012 01:37 PM 136100 49 0665 09.170.8 5E90 2356 Device Error
49 Jan-17-2012 01:42 PM 136103 49 0665 09.170.8 5E90 2356 Device Error
48 Jan-09-2012 04:23 PM 134393 49 0665 09.170.8 5E90 2356 Device Error
47 Dec-29-2011 01:36 PM 132772 41.03.00 09.170.8 GENERAL MISPRINT ERROR
46 Dec-29-2011 11:31 AM 132748 30.01.03 09.170.8 ADF PICK ERROR
45 Nov-04-2011 11:47 AM 125334 41.03.00 09.170.8 GENERAL MISPRINT ERROR
44 Nov-04-2011 11:47 AM 125334 13.06.00 09.170.8 FUSER OUTPUT, PAPER STOPPED JAM
43 Nov-04-2011 11:46 AM 125333 41.03.00 09.170.8 GENERAL MISPRINT ERROR
42 Nov-04-2011 11:43 AM 125332 13.02.00 09.170.8 PAPER FEED 1, PAPER STOPPED JAM
41 Oct-26-2011 05:21 PM 122984 30.01.02 09.170.8 ADF PAPER JAM

Hi wonka001,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

CS5 Photoshop - Adobe Save for Web & Devices Error

Hi folks,
I know similar threads exists, but this one is different. For some reason, out of the blue, I can't use 'Save for Web' anymore. When I choose 'save for web', it opens the preview dialog nicely, up until I save & get this error:
"Adobe Save for Web & Devices Error
Could not complete this operation. An unknown operating system error has occurred."
Cleared all my settings, and the error remains.
I uninstalled PS CS5, installed it again... still get this error.
Hope someone knows how to fix it!
Tx!
MacBookPro3,1, running all the latest updates (OSX 10.6.4), CS5 Master Collection.
Luckily still have CS4 Master Collection installed (and Flash CS3).
(I've just got to get this off my chest, CS5 has so much issues that I stopped using it, I'm not getting paid for playing crashtestdummie. Please don't rush any future CS collections and try fixing bugs instead. )

Hi Wade,
Tx, but 99% of my time, I work on my local system (scratch disk also). Already had problems working with the company's network (files get locked or corrupted while trying to save), so we've learned the hard way not to use the network.
I guess that's somewhat expected if you work with a Mac, in a professional Windows environment.
Meanwhile, I'm a step closer in finding a solution myself. A colleague gave me a great tip, if you create an extra user account on the system, you start with a clean library. On my second account, PS CS5 is working just fine. So clearly, something went wrong in my library. Maybe permissions like you've said. At this point, I could try to fix it by copying files from the one user to the other. But I would like to wait for that connect session so they can see what's wrong.

Device error -the target device isn't suitable for use. Solution found!?

Hello everyone,
I have received the following error many times on my machine for different projects when trying to burn to disk and folders:
Device error -the target device isn't suitable for use.
I have multiple hard drives with ~60GB, 40GB and 12GB. I have tried to burn 4.7GB discs and folders and 8.5GB folders.
I have previously tried nearly ALL 20 troubleshooting items recommended by Adobe and have even changed to Verbatim media. None of these solved the problem.
What did solve the problem, EVERY SINGLE TIME, was freeing up hard drive space or reducing the length of the project.
You may look at the available hard drive space and THINK that you have enough. But you don't.
Perhaps the remainder of this thread could be used to discuss the disk space requirements for projects. I can't seem to crack the formula. I just keep deleting/archiving files until the project works. I have ordered some new big HDD's to be rid of this error forever.
Justin.

While it is certainly possible that diskspace is one factor in getting the dreaded "target device isn't suitable message" (usually after lenghthy processing), it does not appear to be the only one.
I got the message trying to burn a 3 minute video to a dvd on two seperate computers one running xp pro with 150Gb of spare disk space and one running W7 HP with 50Gb of spare space. Tryng to burn to a folder gave the same error.
To me, this pointed to something in the app, or the project, so firstly I deleted the disk menu...burn completed ok. Re-instated a menu (different one)....burn failed. Removed one scene marker and the stop marker......burn completed ok. Re-instated stop marker......burn failed
Am I missing something on the purpose of the stop marker?
There was nothing obviously wrong with the project, although I will admit that I am new to PRE but am not a complete novice to video editing.
The encoding process of the menu's (both passes) went ok, and it wasn't until it got to the "encoding media" phase that the error message appeared.
It would certainly seem that more illuminating error reporting would be beneficial in this case, but it would also seem to be worth trying changes to the menus or markers to see if that fixes the error message.

Device error "sequence contains no matching element"

Hallo,
I just received the VirtualBench and I could use it as I connect it for the first time. I then downloaded and run the program for Window7, so that I would be able to run the program from my PC.
Since then, I cannot work anymore more with the virtualbench. It always give the same error: device error: sequence contains no matching element.....
What it wronf what shall I do?
Note: I read a similar question, but it seemed that the error disppeared somehow for unexplained reason. So, there were actually no solution mentionned for this problem.
Thanks in advance for any support.
Solved!
Go to Solution.

For anybody that has this problem in the future, we'd really like to get to the root of the problem. To help with that I have created a small utility that will pull the configurations from your device and save them to files. These configurations appear to be corrupted in these situations.
The easiest way to use the utility is to run it from the command line. It will find the first USB VirtualBench on your system and save any configuration files it has to your temporary directory. For example:
C:\Users\User\Desktop>nivb_cfgutil.exe
Saving files to C:\Users\User\AppData\Local\Temp\
Connecting to device 'vbzach'
Found config: ni-virtualbench-preferences.vbconfig
Wrote config to file C:\Users\User\AppData\Local\Temp\ni-virtualbench-preference
s.vbconfig
Found config: test_cfg.vbconfig
Wrote config to file C:\Users\User\AppData\Local\Temp\test_cfg.vbconfig
Found config: test_cfg2.vbconfig
Wrote config to file C:\Users\User\AppData\Local\Temp\test_cfg2.vbconfig
It also has some options that allow you to specify the device to connect to (either by name, IP address, or hostname), where to put the files, and whether or not to overwrite existing files on your PC. For example:
C:\Users\User\Desktop>nivb_cfgutil.exe --help
Usage: nivb_cfgutil.exe [options]
Main options:
-h, --help
      Shows help.
-d, --dev=device
      Device name to target.
-o, --out=directory
      Output directory to save config files. If not specified, the temporary di
rectory is used.
-w, --overwrite
      Overwrite existing files.
What we would like is that when people run into this issue they perform the following steps:
Attach the application preferences files:
Open a file explorer
In the address bar, enter this path (copy/paste can help):
XP: %USERPROFILE%\Local Settings\Application Data\National Instruments\NI-VirtualBench
Vista, 7, 8: %USERPROFILE%\AppData\Local\National Instruments\NI-VirtualBench
Attach the file ni-virtualbench-preferences.vbconfig to a post here so we can inspect it.
Run the nivb_cfgutil.exe utility attached to this post, and post any *.vbconfig files it creates to a post here so that we can inspect it.
Once you have done that, you should be able to fix the issue by doing the following:
Use the reset button on the back. The application also uses information stored on the PC when it starts. If the problem is there, then resetting the device alone won't help.
NI VirtualBench Help :: Reset Button http://zone.ni.com/reference/en-XX/help/371526A-01/vbhelp/wirelessbutton/
Launch the app. If it works, you're done.
If the issue was not resolved, you may also need to delete the file mentioned above.
Open a file explorer
In the address bar, enter this path (copy/paste can help):
XP: %USERPROFILE%\Local Settings\Application Data\National Instruments\NI-VirtualBench
Vista, 7, 8: %USERPROFILE%\AppData\Local\National Instruments\NI-VirtualBench
Delete the file ni-virtualbench-preferences.vbconfig
Zach Hindes
NI R&D
Attachments:
nivb_cfgutil.zip ‏991 KB

Device Error - Sense Code

I have tried to burn a DVD using Premier 2.0. Once I got a message - Device Error - Sense Code (04 91 C0) the second time I got the same message but a different Code - (04 92 05). A Third time I got an "Unknown Error" message.
After the first error, I saved it as an AVI, imported it into a new project, fixed the tail end - which had black frames on it, and am burning from that project.
I have saved the file to a folder and tried to copy it using Magic DVD Writer, and get an error message there, too.
When I play the DVD using Nero, it looks fine.
I am using an AOpen writer. Do you suppose it is the burner - or something else?
The thing is that 2 weeks ago, I burned one and it flew through. Prior to that I couldn't get 2 others to burn, and I ended up saving them to folders on an external hard drive and taking them to someone else to burn the master DVDs. The final movies are great!
Thanks,
Penny

Penny,
Usually "Sense Code" errors reflect a problem with the burner and the process.
This can be:
1.) burner is bad or improperly connected
2.) burner is "in use" by another application, like a packet-writing module from Nero or Roxio, or even the OS itself
3.) media is not the correct type, has been used or is bad
Let's check these in order.
1.) does this burner function properly in any other application? If so, we can *probably* eliminate #1
2.) do you have Nero, Roxio or does your OS have a packet-writing (drag-n-drop) application? If so, this is *probably* the cause. If not go down to the next level. Adobe authoring apps need 100% control of the burner. If you must keep the packet-writing app, then look into the free ImgBurn program to actually do your burns.
3.) what brand of media are you using and what type is it? Have you used this brand and type before? If so, could this particular disc have already been written to, even if it was an aborted burn? I use Taiyo Yuden, or Verbatim blank DVDs, and none has ever failed to burn, or to play in a client's player. Note: some brands, like Memorex might actually contain several different producer's media, marked with their name - part of a spindle can be perfect and the rest bad. Ritek used to have a good rep, but lately they have been causing as many problems as Memorex and "bargain brands." Always use the best media you can possibly afford, and burn at the slowest speed, if your burning app allows you to reduce the burn speed.
Chances are that the cause is one of the above. If you go though all three of these and are still having problems, let us know the answers to the questions posed in the solutions area.
Good luck,
Hunt
[Edit] John types much more quickly, than I do!

Device error: 49.38.OC

My mfp laserjet printer m4555 is giving device error: 49.38
How do i fix this problem. we are using windows 7 operating system 64 bits.
Rgds

Good morning i want to upgrade window 8 how can i do it

Device error: 400

Hi:
I have a 7290 blackberry and I have a serious problem. I was installing many aplications in my blackberry but when I installed the last aplication,It´s appear in the blackberry screen: DEVICE ERROR: 400.
How I can to fix this problem? Thank you for your colaboration.

HI,
Something is wrong with an application that was loaded.
Here is the article for resolve your error 400:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11136&sliceId=SAL_Pub...
Thanks,
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Device Error 348 on Curve

I got this phone the other day and this code popped up the first time when my battery was extremely low. I left it off for a little while, charged it and turned the phone back on. It went away. Now for the past 2 days around the same time each morning it does this again. The phone is fully charged, never been wet.
What is this problem and how can I fix it?

Hi and welcome to the forums!
Please go to options, scroll to about,and tell me what version of software is listed.
I will be in the format v4.x.x.xxx.
Here is the fix for the error message, but I want to make sure of your software.
KB03355 Device Error 348 Press R to Reset
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Device error: 246

Hi everyone well my problem is the next when I try to active the mobil network on my cell phone the cell phone displays a message "no network available" the cell phone is unlocked and have the sim inserted. after this message I disable the mobil network and enable again and after this the cell phone display a message "device error: 246" and reset the terminal.
Please guys i need you help.
Thanks

You're in a mess because you installed two pieces of software that have not been released yet and are still in beta. If you were a registered developer(I'm guessing you're not) you'd have access to the developer forums to post your question. You're only solution is to wait until the software is OFFICIALLY released or use google & hope you don't end up making your phone permanently inoperable.

HOWTO: Fix beta 7 SDK provisioning/device errors.

Similar Messages

Maybe you are looking for