Howto overcome the 255 char limit in XSLT when outputting using method=text
Hi, I am facing a problem in my XSLT program to output a CSV file. The header line is exceeding 255 char limit, seems built into the editor and looks like it repeats the 255th character into the next line where it finishes the rest of the line. Now this screws the columns in the CSV file. I have tried different combinations of <xsl:text></xsl:text> tags but to no avail.
Is there a way to overcome this problem, spanning a line onto multiple lines in SAP but getting a single line in the output ?
Thanks in advance.
Swapan
I should have known better to searched in SAP provided documentation instead here first. I needed to end the line with &> chars to continue into the next line.
http://help.sap.com/saphelp_erp2004/helpdata/en/50/b6463c32a3fe13e10000000a114084/frameset.htm
Similar Messages
-
I have three users each with PC/Mac and iPods, how do I overcome the '5 user limit'?
I have three users each with PC/Mac and iPods, how do I overcome the '5 user limit'? If I create a new acct, will it blow out the library on the iPod?
thxYou don't. 5 is the limit of COMPUTERS that can be authorized to a single itunes account. Ipods/iphones/ipad/Apple Tvs do NOT count toward the 5.
-
I have the Jeode EVM on my PDA. I have to execute a code for which I have to list 9 jar files. The entire .ink file is around 400 characters. Could someone please tell me if there is a way to increase the 255 character limit or if I could change the class path to point to there jar files. I tried looking for this in regedit but did not know what command to tweek.
Could someone please help me. I am stuch up here and need help desperately.
ThanksIt is possible to get parameters from file (and setting up classpath by this), when calling evm (in .lnk). Now I can't check what the parameter is (-f ?). It should allow omit the 256 characters limit in .lnk. Try to run evm with parameter which show all options (maybe advanced options). If you couldn't find this, I will check it later and give you detailed information.
regards,
prusak -
Help! I need a simple powershell command to display all folders & files over the 260 char limit
Can anyone help me please? I'm trying in vain to identify any files or folders I have in a directory over the 260 char limit.
my powershell knowledge is quite limited so I've hit the wall with ideas.
Any help appreciated.
ThanksWould running this command on its own within powershell work?
Or do I need to add this to your script?
get-folderitem | Where {
$_.fullname.length -gt 260 -
What is the max file limit for FTP adapter that uses FileIoInteractionSpec
Hi,
I know that Oracle provided some new features in 10.1.3.4 using which we can use the file and ftp adapter to move files in a more efficient way
http://download.oracle.com/docs/cd/E12524_01/relnotes.1013/e12523/adapters.htm#CHDGFAAB
Essentially it involves modifying the WSDL to use the new InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
Now my question is, what is the file size limit which can be transferred using this.
I have tried with 20 mb file, it works. But I want to know the upper limit.
Thanks,
AmitTried with 31 mb file.
It successfully delivers the file but....
The instance never completes successfully in the BPEL Console. If I open the audit tab, it shows the following message
There is a system exception while performing the BPEL instance, the reason is "JTA transaction is not present or the transaction is not in active state. The current JTA transaction is not present or it is not in active state when processing activity or instance "7,200,001". The reason is The execution of this instance "7200001" for process "TestFTPLimit" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.. Please consult your administrator regarding this error. ". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point.less
ORABPEL-02182
JTA transaction is not present or the transaction is not in active state.
The current JTA transaction is not present or it is not in active state when processing activity or instance "7,200,001". The reason is The execution of this instance "7200001" for process "TestFTPLimit" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
Please consult your administrator regarding this error.
at com.collaxa.cube.engine.CubeEngine.store(CubeEngine.java:5514)
So does anybody know how to get over this.
I understand that sync read is a sync operation, so obviously it was going to timeout, as this transfer took around 4 minutes for me. But then, isnt this a bug from Oracle's side -
With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1
This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.
-
Occasionally when filling in forms in Safari 5.1.2 certain keys on the keyboard don"t work. When I use the coma it opens up another tab. I've used other browsers to fill in the forms and they work fine so my keyboard is OK.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is localized to your user account, or is system-wide. Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select “Help” from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Any application you run will behave as if you were running it for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, launch the application(s) and test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. -
The send buttin is greyed out when I try to text some but not all people from my iPod Touch. This happens even when they have iPhone 4s. Any ideas why and how I can fix this?
This issue can be caused by the McAfee SiteAdvisor extension.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.
Hi there,
Can you please share your Captivate version?(Help>About Adobe Captivate)
Thanks,
Nimmy Sukumaran. -
Is the iphone4 suppose to get hot when in use.
Is the iphone4 suppose to get hot when in use?
Which player? My Nomad Jukebox plays alphabetically if I just select an artist, but if I open an artist and select an album, it's by album order.
-
Hi,
I've recently posted a question about this but right now, I'm to understand the concept. I'm going to give a bit of background in order to make it more understandable.
We have an application in which an object (A) contains a list of objects (B). Each of these objects in turn may contain objects (C). Each of these is a different type of object
Currently, we have designed a very simplistic pattern that follows:
- Load all Objects A according to user criteria
- Build a list of comma-separated IDs of Object A and retrieve Objects B using SELECT * FROM B WHERE ID IN (1, 2, 3, etc...)
- Use the B objects returned to build a comma-separated list of IDs of Object B and retrieve Objects C using this list as: SELECT * FROM C WHERE ID IN (4, 5, 6, etc...)
Now, this works, but only in very simple conditions.
Obviously my main concern is that it just won't work if you return more than 1000 Objects A or B at any point in time. The main problem I am facing now is regarding the way to make this work better, in terms of coding pattern and SQL optimization. IN is not that great with large sets as I understand it since it will use conditions such as 1 OR 2 OR 3 etc...
I've checked out Tom Kyte's website and the table type solution (http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:110612348061). It works, but my string parameter passed in could be more than 4,000 bytes for large reports... Soooo, I kept on reading and saw the BULK INSERT idea.
My question is the following: In an application where many users may run reports at the same time, is it even valid to consider doing this?
- LOAD --> BULK INSERT --> LOAD USING BULK INSERTED VALUES --> CLEAN UP CUSTOM TABLE
Hereby preventing other users from running their reports until this one is finished (unless I have one custom table per type of object)?
Or is the simple: LOAD OBJECTS A --> LOAD OBJECTS B USING SUBQUERY TO LOAD OBJECTS A better from the beginning? My main thing against it is that we run a query again after we just ran it so we already have the data we need but we have no choice but to re-write it.
I don't have anything against the BULK INSERT method etc... but for index usage and maintenance, the other solution just seems more complex for a performance that just would not be that great.
What do you think about it? And if you have the same problem as I do right now, how do you go around it?
GregHi,
No no it's my bad, I actually did not realize that I mixing up some programming and Oracle concepts without being specific.
I'm assuming the problem with the 1000 list limit for an IN operator is understood though.
We perform several SELECT statements to retrieve records from our database. These records are used to instantiate java objects (this is in a J2EE application server, not in the Oracle JVM or java pool at all).
As an example (I apologize if it's a bad one), on the java side, we have a motherboard. It can contain one or more RAM slots. Each ram slot may contain a RAM module in it (for the sake of the example, I'll say it can contain one or more modules, just like old sockets...). On the database side, we have a MOTHERBOARD table, a RAMSLOT table, and a RAMMODULE table.
My question was the following: a user may run a report saying that he/she wants to get all motherboards' information in the database. Right now, the way it's been made is that we select all motherboards, get their unique identifier and build a comma-separated list of these ids (in the java code), and then do a
SELECT * FROM RAMSLOT WHERE MOTHERBOARD_ID IN (1, 2, 3 etc...).
And the same is done between RAMSLOT and RAMMODULE. The problem is that if more than 1000 motherboards exist, it just won't work.
Now, when I was looking at the ways to overcome this problem, I went to the Tom Kyte article mentioned. One solution is to create a function that will return a custom table type when passed in the string '1, 2, 3, etc...'. While this works with a small number of motherboards, well, if we loaded a lot of them and went over 4,000 bytes, we get a 'String Literal too long' error. This was mentioned on the AskTom article, to which the followup was: 'use BULK INSERT'. This is why I mention it. I guess what was meant is to load all the data in the custom type table and then perform as before.
This is why I was wondering how this could possibly be better than just re-writing the query as a subquery later (as undesirable as it might be).
Thanks for the help and please answer if anything isn't clear.
Greg -
SQLLOADER: Large Data Loads: 255 CHAR limit?
Issue: I'm trying to load a delimited text file into an Oracle table
with data that execeeds 255 characters and it's not working correctly.
The table fields are set to VARCHAR2 2000 - 4000. No problem. Some of
the data fields in the file have over 1000 characters. Ok. When running
a load, SQLLOADER seems to only want to handle 255 characters based on
it's use of the CHAR datatype as a defult for delimited file text
fields. Ok. So, I add VARCHAR(2000) in the .ctl file next to the fields
that I want to take larger datasets. That does not seem to work.
When I set a field in the control file to VARCHAR(2000), the data for
that field will get into the table. That's fine but, the issue is
SQLLOADER does not just put just that field's data into the table, but
it puts the remainder of the record into the VARCHAR(2000) field.
SQLLOADER seems to fix the length of the field and forgets I want
delimiters to continue to work.
Anyone know how to get SQLLOADER to handle multiple >255 data fields in
a delimited file load?
jk
Here is my control file:
load data
infile 'BOOK2.csv'
append into table PARTNER_CONTENT_TEMP
fields terminated by ',' optionally enclosed by '^' TRAILING NULLCOLS
(ctlo_id,
partners_id,
content2_byline ,
content2 varchar(4000),
content3 varchar(2000),
content9 varchar(1000),
submitted_by,
pstr_id,
csub_id)
nullI have been sucessful using char instead of varchar. But having
the optionally enclosed by value in the data has always solved
the problem. -
Dealing with the 255-field limit
Hello,
In one of my AW DB — a file with which I keep track of my student records, like grades and absences — I have 3 x 60 fields to count the absences, in each of the trimesters and the number of 50-minute class could be close to 60.
The classes fields are labelled: '01', '02', ..., '60'; '2.01', '2.02', ..., '2.60' and '3.01', '3.02', ..., '3.60'.
The value fields of each of those fields are: “ “, “.” and “f”. The default is “.”.
The way for counting the absences of the 1st trimester, using 3 fields, i.e., the number of “f” is:
T1_Faltas1=
COUNT2("f",'01','02','03','04','05','06','07','08','09','10','11','12','13','14' ,'15','16','17','18','19','20','21','22','23','24','25','26','27','28','29','30' )
T1_Faltas2=
COUNT2("f",'31','32','33','34','35','36','37','38','39','40','41','42','43','44' ,'45','46','47','48','49','50', '51','52','53','54','55','56','57','58','59','60')
T1_F=
IF(OR('Situação1'="Regular",'Situação1'="Incluído"),'T1Faltas.1'+'T1Faltas.2',"")
This has been functioning well for some years.
The problem appeared now, because I am going to teach classes to 5th and 6th year of another State School and those grades have 5 Math classes a week — instead of 4 classes. Then, I would need around 15+ classes fields for each trimester.
But the real situation is that I can not create those extra fields because my DB has a limit of 255 fields and I already reached that number of fields.
I can resolve this by using a single class field for a day that has 2 classes, and the options would be: “ “, “..”, “ff”, “.f”, “f.”
Note: the option of a “ ” empty space or a double empty space are for the students that left that group; the options “.f”, “f.” are for students that were in one of the two classes of a day and the option “ff” is for the ones that were absents in both classes of a given day.
The problem would be to count the absences: I know how to do it, using a lot of fields — but the limitation of fields is the big problem — and I am writing you to get a better solution.
If I could create more fields, I would do the following for each of the trimester, say T.1:
1)T1f1=
COUNT2("f",'01','02','03','04','05','06','07','08','09','10','11','12','13','14' ,'15','16','17','18','19','20','21','22','23','24','25','26','27','28','29','30' )
2)T1f2=
COUNT2("f",'31','32','33','34','35','36','37','38','39','40','41','42','43','44' ,'45','46','47','48','49','50', '51','52','53','54','55','56','57','58','59','60')
3)T1.f1=
COUNT2(".f",'01','02','03','04','05','06','07','08','09','10','11','12','13','14 ','15','16','17','18','19','20','21','22','23','24','25','26','27','28','29','30 ')
4)T1.f2=
COUNT2(".f",'31','32','33','34','35','36','37','38','39','40','41','42','43','44 ','45','46','47','48','49','50', '51','52','53','54','55','56','57','58','59','60')
5)T1f.1=
COUNT2("f.",'01','02','03','04','05','06','07','08','09','10','11','12','13','14 ','15','16','17','18','19','20','21','22','23','24','25','26','27','28','29','30 ')
6)T1f.2=
COUNT2("f.",'31','32','33','34','35','36','37','38','39','40','41','42','43','44 ','45','46','47','48','49','50', '51','52','53','54','55','56','57','58','59','60')
7)T1ff1=
COUNT2("ff",'01','02','03','04','05','06','07','08','09','10','11','12','13','14 ','15','16','17','18','19','20','21','22','23','24','25','26','27','28','29','30 ')
8)T1ff2=
COUNT2("ff",'31','32','33','34','35','36','37','38','39','40','41','42','43','44 ','45','46','47','48','49','50', '51','52','53','54','55','56','57','58','59','60')
At each trimester end, the total of absences would be something like this:
9)T1_F=
IF(OR('Situação1'="Regular",'Situação1'="Incluído"),'T1f_1’T1_f_2+T1_.f_1+T1_.f_2+T1_f._1+T1_f._2+2T1_ff_12T1_ff2,"")
So, using 9 fields — instead of 3 — for each trimester, I could do the task.
Maybe I can stay with this solution — depending on how many days that I will have 2 classes — using only one field — but I would like to see if I can come with a solution that counts the absences using less fields, say just counts how many ‘ f ‘ each student has.
Any help will be appreciated,
Jorge Lucas, the guy from Rio Grande do SulYvan The Terrible,
I am not surprised that you were able to write this script for me; it did not completely solve the task but it did an important portion. This is not the first time you wrote a script for me.
Seeing the result, I thought that one could rewrite it the other way around, i.e.: with the fields and the field types of a given DB, one could write a script to build a new AW DB, with those fields. Of course, the first script to get those fields and field types should be deeper to extract the formulas of Calculations Fields and the options for the Value List Fields.
Since I have 180 Value List fields with exactly the same options, it would be very much easier to have those in a SS module, before recreate — or just create — the DB. Besides those, there are a number of calculations fields, that are pretty much alike, with some adaptations. It would be very easy to redesign the DB.
I am not asking you to do this, but I would not doubt that it is possible.
The only thing that would consume time would be designing the layouts, unless one could be able to do this given, at least, the sizes of the fields (imagine that you have the sizes of most of the fields, say 60, inserted in a customized layout, instead of 1 inch width!); this would be really difficult, but here one question is too important, in order to recreate an DB file:
*+Is there a way to import a layout from a DB file to another DB file with the same fields of this very layout?+*
About the origins of AW and FMP: several years ago I pass some time playing at the FMP 3.0; after I saw the version 6.0 and later the version 9.0 — +it looks like some time I will see the FileMaker Pro 12.+
I remember perfectly well that the creation of the fields in the FMP 3.0 was very much similar to ClarisWorks. After, I was able — seeing the templates — to create a relational DB with 6 to 8 files in the FMP 6.0. Of course, like Barry said, the learning curve is steeper.
But I felt at home.
It surprises me that both you, Yvan — on this forum — and Barry — on a direct message — said that they were created by different teams. My guess is that one copied the other.
Thanks for your time!
Best regards,
Jorge Lucas (the guy from Rio Grande do Sul)
P.S.: +if I ever grew up — I am only 55 — I wanna be like you: a terrific expert in building AppleScript scripts.+
Message was edited by: Jorge Lucas
Message was edited by: Jorge Lucas -
My friend wanted to get some music off my itunes - when syncing it it said she had to update her phone software first - which it did. Now all her photos are gone. When we tried to restore the last back up - the only one was from when she used my itunes 6 months ago which was from her old iphone. So now it has put all her photos from her old phone onto her new iphone and deleted all the new ones. We cannot find her new photos. Please help and there was 100 new pics. Is there any way we can get them back. I already have the program Asoftech - but it doesnt seem to register the iphone only C and D drive. Please help!
bechosken wrote:
My friend wanted to get some music off my itunes
This is called "stealing". You do not have the legal right to give her the music you have in your iTunes library unless you are the copyright holder.
when syncing it it said she had to update her phone software first
That's not quite what it said. Someone should have paid more attention to the great big warning about the possibility of losing data if the phone wasn't backed up.
We cannot find her new photos. Please help and there was 100 new pics. Is there any way we can get them back. I already have the program Asoftech - but it doesnt seem to register the iphone only C and D drive. Please help!
It restored the backup that was made on your computer 6 months ago, which did not contain those photos. You're wasting your time trying to find them on the phone. They don't exist.
Hopefully, your friend syncs her phone to her own computer on a regular basis. She needs to plug her phone into her computer and restore it from her last backup. That will restore it to the state it was in when the backup was made.
She also needs to get in the habit of extracting the photos on a regular basis, like she would from any other digital camera. -
What 's the meaning of "sample rate =-1" when to use the CAN init.vi?
ALL,
I saw a kind of use to CAN init.vi where The mode = "output recent" and the sample rate = -1. I check the NI CAN help document, it seems that the sample rate must be large than 0 when the mode = output recent. So,here,why the sample rate can be -1? What does it mean?
Thanks!
LaiI found that it is different whether to use "-1" or ''0" to sample rate. In CAN init.vi, there is an input parameter filepath which is used to load the ncd file or dbc file. The ncd file can't set the sample rate of CAN message, but dbc file can. When I use sample rate = -1 and dbc file , the period(=1/sample rate) of CAN transmission equals the Sample time defined in dbc file and is not determined by loop time in LabVIEW programm. But when I use sample rate = 0, the period of CAN transmission equals the loop time in LabVIEW programm. So I guess the period of CAN transmission is determined by the Sample time defined in dbc file when use sample rate = -1. Is that true?
Maybe you are looking for
-
I can no longer read my bank statements. I believe they are using a PDF to display this information.
I can no longer read my bank statements. I believe they are using a PDF to display this information. If I go to chrome it will open the bank statements but Firefox no longer open these flies. Why??????
-
Help, i dont want to loose all my music on my ipod
heres what happend. i was reinstalling windows and i put all my (12gb) worth of music on my ipod.. i just copy and pasted it onto the ipod. i basically deleted everything off of it and used it as a external hard drive... i then went ahead and reinsta
-
When I start Firefox, I only get the background of my browser in the Firefox window. I the normal window for 1 second, but then it changes in only the background window. So without toolbar, or navigation. I already reinstalled it, but that doesn't fi
-
HI , i have explained sample use case here . i have vo having 3 attributes named as Attr1,Attr2,Attr3 . for Attr2 , i have attached LOV ,its returns two value and values mapped to Attr1 and Aattr2. i need to perform search based on the Attr1 and Att
-
It's happening more often!! While using safari, it suddenly freezes (beach ball of dead) and then the whole Mountain Lion freezes. The only option is to press the power button for some seconds so it turns off. Anyone has any idea about this!?