HOWTO set scan to email using a google mail?

Hi all ,
I am trying to scan to email with our HP 4100 mfp , I have already followed the manual and various tutorials on the net but still doesn't work .
The email accounts we use are google ones for businesses and they require authentication ssl, the problem is that is not possible to set the ssl parameters on the printer setting .
Does anyone know what to put on smtp gateway and smtp server or another trick to make it work?
thanks

I think that all mail provider use the authentication and ssl to send. I'm try to look for a provider that don't use these settings.

Similar Messages

Problems Setting Up University Email (uses Gmail) in Mail

I have a student email account that runs through gmail, but it doesn't actually say gmail in the email address anywhere. I think this might be the reason why when I try to set up that account in Mail (tried both POP and IMAP) it's not accepting my login information. Is there a way to make this work?

Not an exact solution for you, but our University has a computer store on campus that was all kinds of help when setting up University email to operate through Mail, remotely.
Give the IT Help desk or (if one exists) the store a try.

How do I set up my email on Windows Live Mail on Windows 10

Upgraded my Window 8 to Windows 10. I also have a laptop with Windows 7.I am trying to set up my email (using Windows Live Mail) on the computer with Windows 10. I typed in exactly how it is on my laptop, but it won't work. Anyone able to help?

If it will not verify, that means that one of the settings that you have done for the account is incorrect. Check back with the email provider to make sure you have all of the settings required, that they are correct, and lastly to make sure that you are entering all of the correct information in the correct places.

How can I configure mailto links to use my Google mail instead of Outlook ? I had it set in FF v3.6

In Ver 3 I had my mailto links using my Google Mail instead of Outlook. How do I set the same way in Ver 4 ?
I'm looking for the mailto app in Apps area and do not see it. That is how I did it in Ver 3.
Thanks,
Joe

So I had the same problem and expected it to change with Ios5 but it's still the same. Settings in my iPhone4 v5.0 shows my Mac.com asthe account but Mac.com address is STILL grayed out when sending mail. Can ONLY send from me.com (which i NEVER use) It's not that way on my iPad, just the VZ phone. Very annoying.

Can I set up an email account in Mac mail if it already exists in mac for outlook?

Can I set up an email account in mac mail if it already exists in mac outlook or do I need to delete the outlook account first? I have tried to set it up and its not working.

Mail and Outlook are two different applications, so you can maintain the same account in both, incl sending and receiving.
What matters is that the setup is correct. E.g., is it a POP3 or IMAP account? By default, IMAP stores all mails on the (ISP's) server, while POP3 usually deletes it there after it's been received. So, with IMAP you'd easily have your mails everywhere, in every client, while with POP3 it's only in the client which you used most recently, so to speak.
A quick description of IMAP vs. POP3

Set up BigPond Email on Mac OSX Mail 10.4 to 10.7

This page will help you set up your BigPond® Email on Mac OSX Mail versions 10.4 to 10.7.
Mac is a trademark of Apple Inc
Before you start
You'll need your Telstra email username and password.
Note: The setup and use of your email account may incur data use charges.
You may need to first turn on a 'POP' Internet email protocol for your Outlook.com account (following Steps 1 to 5 below) – if your email app:
does not support Exchange ActiveSync or IMAP, but
does support POP3.
If you're not sure, you should follow Steps 1 to 5 to check that the right settings have been applied.
Step 1
Sign in to your Outlook.com account
Step 2
Press the Options icon and then press Options
Step 3
Under Managing your account, press Connect devices and apps with POP
Step 4
Under POP, select Enable
Step 5
Press Save.
Then use the following settings in your email app.
Step 6
Open the Mail menu and then select Preferences
Step 7
In the Accounts window:
Press the Accounts button in the top menu to activate the Accounts tab.
Press the “+” button at the bottom left of the window.
Step 8
In the Add Account window, enter your logon information as follows:
Full Name: Enter your name as you’d like it to appear in the emails you send.
E-mail Address: Enter your full email address (ending in '@bigpond.com' or '@bigpond.net.au').
Password: Enter your Telstra email account password which will be case-sensitive.
Step 9
Press the Continue button
Step 10
In the Incoming Mail Server window, update the settings as follows:
Incoming e-mail server type: Select 'POP3'.
Incoming Mail Server: Enter 'pop-mail.outlook.com'.
User Name: Enter your full email address.
Password: Enter your Telstra email account password which will be case-sensitive.
Step 11: Press the Continue button
Step 12
In the Outgoing Mail Server window, update the settings as follows:
Outgoing server: Enter 'smtp.outlook.com'.
Ensure the checkbox is ticked for Use only this server.
Ensure the checkbox is NOT ticked for Use Authentication.
User Name: Enter your full email address.
Password: Enter your Telstra email account password – which will be case-sensitive.
Step 13
Press the Continue button
Step 14
In the Accounts Summary window, carefully review the settings you’ve entered to ensure that they’re correct.
If you need to edit something, you can press the Go Back button
Step 15
Press the Create button to create your account which will allow you to send and receive email
Step 16
There are still some more settings to update in the Advanced tab:
Open the Mail menu – and then select Preferences.
In the Accounts window, press the Advanced tab.
Step 17
In the Advanced tab, update the settings as follows:
Select the radio button for Use Custom Port.
Use Custom Port: Enter '587'.
Ensure the checkbox is ticked for Use Secure Sockets Layer (SSL).
Authentication: Select 'Password'.
User Name: Enter your full email address.
Password: Enter your Telstra email account password which will be case-sensitive.
Step 18
Once all the settings are entered correctly, press the OK button.

Re: Set up BigPond Email on Mac OSX Mail 10.4 to 10.7
The " BigPond® Email on Mac OSX Mail versions 10.4 to 10.7." has references to the outlook configuration and nothing referring to Apple Mail. Please revise this section of the help guide.

Can i set up two emails accounts on the mail function tab and switch between them

I would like to be able to set up two email accounts on the mail tab on the Iphone 5 and switch between them, is this possible?

Yes it is possible to set up multiple accounts but you cannot switch between them in the mail app. What you can do in settings/mail etc is have one set as active an dthe other as inactive and you can change that from time to time if you want

Color imageCLASS MF9220Cdn scan to Email using GMAIL as business apps

We use Google apps for nonprofits and all of our email is handled by gmail.
What settings do we use on the MF9220Cdn to send scans by email?
I have set the SMTP server, username & password. How can I turn on SSL?
Any help?

I have a Color imageCLASS MF8580CDW on a wifi network (no ethernet or USB connected), behind a home router (Verizon). I use it with Airprint on my iPhones and two Macs.
Here's what I use in System Management Settings:
Network Settings
TCP/IP Settings
Port Number Settings
SMTP: 587
E-Mail Settings
SMTP Server Address: smtp.gmail.com
E-Mail Address: <<myusername>>@gmail.com
Authentication/Encryption Settings
Use POP Authentication Before Sending: Off
Use SMTP Authentication: On
User Name: <<myusername>>@gmail.com
Password: Set.
Use SSL: On
Confirm Certificate for SMTP Sending: Off
It took me a while to get this, and like the reply you got, Canon was no help at all when I asked them via email. Good luck!

Can I set my iCloud email as the outgoing mail server for my google apps email account in Mac Mail?

I have a google apps email account from an old client, all my work emails have been going to it for years. As I'm no longer affiliated with this client I'd like to make a transition to using my iCloud account for work. I asked people to use my iCloud address but as they've been using my google apps address for years it's what automatically comes up when they type my name.
I figure the easiest way to make a transition is if I reply to all the emails that arrive at my old address from my iCloud address and gradually they will start using my new address without realising it. But I can't find a simple way to do this.
In Mac Mail preferences > accounts > Google IMAP (my old account name) > Account information > Outgoing Mail server (SMTP) I'd like to set my iCloud SMTP server. But although my iCloud account uses its own outgoing mail server for its own account , it is not in the server list when I select my google account. I've tried to add it to the server list as smtp.mail.me.com but it caused my whole iCloud account to give me error messages until I force quit Mail...
Any ideas?

In iCloud/Mail, have you tried going to Preferences (select with gear at lower left)/Composing and setting a Send from address there?

Scan to email using gmail as SMTP

I have an HP Office Jet Pro 8600 N911g printer. I have this currently setup with the scan to network folder working great. I would like to set the scan to email. As the corporate office uses exchange I have to use another service for SMTP. I setup a Gmail account and puched in the appropriate settings, but the unit fails to connect to gmail. I've tried multiple ports without success, I've also tried setting up the email server settings, again trying multiple ports without success. I've tried using every combination using SSL and SMTP authentication, but nothing seems to connect.
Does gmail actually work, I've seen some say yes, others say no. Is there another service that would work outside my corporate network or do I need to setup an internal email server, just so I can scan to emails?
This question was solved.
View Solution.

Hi,
Try following the exact steps below and check if that may help:
Click the network setting on the printer and locate its IP Address.
Type that IP from the browser on your PC to access its EWS page.
Click the Scan tab.
Under Scan to E-mail click Outgoing Email Profiles.
Click New.
Type your email address and any selected Display name, then click Next.
Note: be sure to take a note of the specific Display Name.
Fill the mail settings as following:
- smtp.gmail.com
- 465
- Check the box next to SSL
- Check the box next to the SMTP Authentication option
- Type your full gmail address as teh user name and type the gmail password.
Click Next and dontinue following the steps till teh Summary, then click Save and Test.
If the Test fails for any connectivity issue continmue following the steps below:
Click the Network tab.
Under the active connection type section click IPv4 (Wired / Wireless).
Keep the IP Address Configuration as exists, under the DNS Address Configuration check the box next to Manual DNS Server.
Set the Preferred DNS as 8.8.8.8
Set the Alternate DNS as 8.8.4.4
Click the Scan tab and click on Outgoing Email Profiles again.
Click the Test button next to the Display Name configured earlier and check foir any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Setting up outgoing email using sky

Hi we are having trouble transferring our existing email address to sky broadband. We previously transfered our virgin email account to orange broadband no problems but have recently changed our broadband provider to sky. Now we can recieve incoming mail ok (on the virgin email address) but cannot send outgoing mail from our computer, virgin say they are ok with us using their server/address still and sky claim there is nothing they can do. Can anyone shed some light, I have read a few comments about ISP's not letting you use other ISP's email addresses, is this the case ? Do we really have to change our email address again ???? Help !

Hello help_me_please9,
Welcome to the HP Support Forums!
I understand you are having issues setting up Scan to Email, I have a suggestion that may be helpful to you. Gmail as a Two-step Verification within their Email settings that helps secure your account. Try disabling this, if enabled, and see if it allows you to then setup Scan to Email.
Log into your Gmail Email account.
Click Email or icon in right corner and then Account.
Click Security.
Under Account permissions> Access for less secure apps, click Settings.
Enable it and click Done.
Re-run the Scan to Email setup.
Let me know if this helps.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How can I set up another email client to send mail as my dotmac account?

My business uses an online application that can send emails to our customers as long as we provide it with an email account. I used the following from my mail.app:
SMTP HOST: smtp.mac.com
SMTP PORT: 25
SMTP_AUTH: true
SMTP USER: cryogen (my dotmac account and email)
SMTP PSWD: ****** (my dotmac password)
But, I cannot seem to get this to work. I tried it with another account I have with COMCAST.NET and I was able to successfully send emails using that account.
Is there something special about a dotmac account that I am missing?
Thanks.
PowerMac G4 MDD Mac OS X (10.4.8)

The information you’ve provided now is what I was asking for. Unfortunately, it’s still insufficient. It’s critical to know here whether the SMTP server does actually accept or reject the request of the mail client to send the message. Any conventional mail client would allow you to know that. In Mail, for example, you know that the message has been sent because Mail puts it in the Sent mailbox (whether the message arrives at the destination is an entirely different issue). And if the SMTP server rejects the message for some reason, Mail will report what the reason is.
Whether I’ve actually set up a different mail client to send with a .Mac account is irrelevant -- I don’t even have a .Mac account, for that matter, nor do I need one. Gee, if I needed to have the same accounts as the people I help, I couldn’t be here. Fortunately, I just need to know how email works and what the idiosyncrasies of some email services are, if any.
Try setting up your .Mac account using a conventional alternative mail client, such as Thunderbird, and you’ll see that you can do that with no problems -- or, if you have problems, it should be pretty clear what they are exactly and how to fix them.

HT201320 how do you set up and exchange account for google mail

how do you set up and exchange account for google mail

If it's a free gmail account, you don't. Google no longer permits free accounts to be set up using Exchange Active Sync. Only paid google apps accounts can be set up as Exchange accounts.

Setting the browser to use in mac mail

my mail.app is suddenly using IE when I click on an email link.
how do I set this back to Safari? I see no preferences for this in mac mail prefs.
thanks!
G5 Dual Mac OS X (10.4.2)

You set the default browser via Safari preferences and you set the default email client via Mail.app preferences.
Choose Preferences from the Safari menu, then click General. Choose Safari from the Default Web Browser pop-up menu.

Satellite P200-10O: Can't send emails using Vista Windows Mail

Can any one help.
I have a Satellite P200-10O, with Vista installed. In Win Mail i have set up my email accounts as normal.
When i open Win Mail i can click send and receive and it searches for new messages, this can be repeated as often as you like. However when i create a new message and click send it stops working. The message goes into the outbox, if i open it in the outbox and click send, nothing happens, after a while of trying every thing freezes up. If i then close the program and re open it will send the message but then sometimes the send and receive doesn't work until you close and re open. Also the message counters do not up date.
I have tried everything i can think of, Vista forum, ISP, Toshiba. So far no joy although i will be getting back in touch with Toshiba again. Message is set to send immediatley.
No virus or firewall is being used.
Cheers
1stopcarp

Hi buddy,
why are you making yourself such problems?? Why dont you use Mozilla Thunderbird which is faster, reliable and has better functions then this Vista Mail thingy??
I use Thunderbird now for some years and I love it. Its better than outlook and has so many functions which make the work a lot easier.
If I were you I would check the following link a thinkabout:
http://www.mozilla-europe.org/en/products/thunderbird/
Greets

HOWTO set scan to email using a google mail?

Similar Messages

Maybe you are looking for