HP 1005 scanner not supported error

the error say scanner configuration not supported close window and use TWAIN software. please help.

Some scanner models are difficult to support in VueScan because the author is unable to ascertain the control codes for a particular model. As I suggested you might ask HP tech support if they have scanner drivers for other models that will work with yours.
However, the reality is that new scanners are pretty cheap and for the money probably much better than the scanner you have. Maybe it would be better simply to buy a new scanner that you know is fully compatible and comes with Mac drivers for OS X (both PPC and Intel versions.)
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Similar Messages

Datatype : 25 not supported error while saving Logical Query in BIP Dataset

Hi All,
I have created a nested logical Query in OBIEE Publisher Datamodel using parameters.
Here is the simple query :
Select name, revenue, date from
select "SubjectAreaName"."TableName"."Name" name,
case when :Date > date '2012-01-01' then "SubjectAreaName"."TableName"."Revenue" else NULL end Revenue,
date date
from
"SubjectAreaName"
where
date = :Date
) T1
Note - :Date is the parameter. When I try saving this dataset as-is, it throws me Datatype : 25 not supported error. But, when i replace the parameter :Date with actual date, then the query works. Also, the inner query works with or without parameters. The issue arises when I use the outer query and the parameters.
Please let me know if you have come across such a problem ?
Any help on this regard would be highly appreciated.
Thanks
Swarna

ya i can understand we wont do the sql logic at the data model part as some time performance issue may come when comparaed to sql run in package and sql running in data model . so i have mostly done using package and i will just do select * from table in the data set of data model so i didn't face any issue's like this .
once check this tutorial may be you already
i use to create parameters like this i didn't face any issue
SELECT * from TEST where ID=:p_id
http://st-curriculum.oracle.com/obe/fmw/bi/bip/bip11g/gettingstarted/gettingstarted.htm

CS4 install problem "you cannot run...architecture not supported" error

Just received my copy of CS4 (Mac) from amazon.com. Installed it. But could not get it to run. Got a "You cannot run....architecture not supported" error message. Can't understand why? This is my first version of Photoshop CS. Didn't install CS3...etc. Nor did I previously install the "master" edition. And I am running a MBP 2.5GHz laptop. So it has to be software related. A corrupt file perhaps?
I also cannot install Adobe AIR. Suddenly 3 windows pop up. Telling me I can't install AIR.
Not happy. Expensive software not running. Not good. :P What gives???
Please help me soon!

Where were you yesterday Buko?? :) Where would one find the "CS4 Cleanscript" any how? Would have been nice if you provided a link. Heh...
Any how. Last night. I did d/l the trial version of CS4 Extended. Installed it. Then read the READ.ME file. Stresses that you MUST use their uninstall program. That you can't simply drag the folder to the TRASH (or use AppDelete or AppZapper...as you would be doing the same thing pretty much). So, I used Adobe's CS4 uninstaller. Did a very thorough job of removing the right files.
I managed to sucessfully install my copy of CS4. I even got the proper SETUP dialogue box this time (6 tabs). Previously only 3 tabs were visible. This one asks you to input your serial # and even register before you finish.
Now I see the blue PS folder icon. Have copied a few PS program icons to my dock. Working now as it should.
Moral of the story? Read the READ.ME file!! And use proprietary uninstall programs for huge complicated programs like PS CS4. :) Later guys.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

Jabber 4.4 "Graphics card or driver not supported" error on one machine but not another.

Hi, I looked at the KB document but the email link on it no longer works.
I have two end-users using Jabber 4.4 on identical machines, same specs, same driver build and OS image. One gets the "Graphics card or driver not supported" error, the other does not.
We have two DellOptiPlex 7010's,
Both had 2 instances of AMD Radeon HD 7470 - they are dual monitor machines.
In both cases the driver version 8.922.0.0, Driver Date 12/6/2011. This is the latest Dell has on their website.
On one machine when I run a fresh install for Jabber for TelePresence 4.4 it works fine. But on another the user first gets
"supportabilitytest.exe has stopped working
A oriblem cause the program to stop working correctly. Please close the program."
Then when that's closed out we get:
"Graphics card or driver not supported!
New features in this version of Jabber Video are not supported by your computer's graphics driver.
Update to the newest graphics driver available and run Jabber Video again."
I can't believe it's just a matter of upgrading the drivers because in this case one machine with identical drivers works.
I appreciate any insights, thanks !

Hi ksouthall,
It sounds like the openGL supported version did not install on the one that is failing. There isn't much we can do regarding that error. Best practice is to always upgrade to the latest manufacturer's available driver. Client requirements are below.
Windows 7 (32-bit or 64-bit), Vista, or XP (SP 2 or newer), with OpenGL 1.2 or newer.
For 720p HD video calls, Intel Core2Duo @ 1.2GHz or better.
For VGA video calls, Intel Atom @ 1.6GHz or better.
Webcam, built-in or external. You need an HD webcam if you want other callers to see you in HD.
Broadband Internet connection with a recommended bandwidth of 768kbps upstream and downstream. You need about 1.2Mbps upstream and downstream for 720p HD video calls.
Regards,
Jason

Getting a Not Supported error box when trying to link a subreport to the..

I am trying to build a subreport off of my main report. I am trying to link my subreport stored procedure to my main reports stored procedure. All of the paremeters on the sub report SP are of the same data type of the fields I am linking my parameters to in the main report SP. After I set it all up and go to preview it I get a "Not Supported" error box that pops up. Then I click ok and all i have is a blank white page. Does anyone know what is not supported? This happens when trying to build this report in crystal 2008. I even tried building this same report in crystal 10 and it works perfect. I don't know what I am doing wrong in the crystal 2008 environment. Please help

Thanks Bill. This fix resolved my issue.
I would award some points, but I guess as I didn't post the original question there is no facility to do this. Shame.
Appreciate it, Brendon.
Edited by: Brendon McEvoy on Apr 23, 2009 1:39 AM

E3000 shows "USB is not supported" error with External Harddrive

I have the E3000 router and recently purchased a USB WD (Western Digital) 2TB External Harddrive. I plug the Harddrive into the router, open the router homepage (http://192.168.1.1/) then click on Storage > Disk and I get a "The attached USB is not supported" error - any suggestions on how to fix this?
Thanks for any help!
Solved!
Go to Solution.

Likely Final Update: WD Support sent me a link to download / install SmartWare and solve the problem I was having with the SmartWare software ("Drive Settings" was greyed out). Once I got SmartWare back up and running I was able to change the "Drive Settings" within SmartWare. As the last update suggested, I modified the sleep timer settings and security (password settings) and tested to get the following results:
Sleep Timer on / Password protection on: E3000 shows "USB not supported"
Sleep Timer off / Password protection on: E3000 shows "USB not supported"
Sleep Timer on / Password protection off: WD Hard Drive seen and seems to function properly when connected to E3000
Sleep Timer off / Password protection off: WD Hard Drive seen and seems to function properly when connected to E3000
So (other than maybe some inital problems with the WD SmartWare) it appears the "USB is not supported" error is due to the Password protection being turned on for the External Hard Drive. This point should be highlighted in the Western Hard Drive materials but I don't see it anywhere on the box or in the manual (maybe its fine print in the manual). Cisco and / or Western Digital are screwing us by not allowing password protection (or making this point known) on at this least model of Hard Drive!
Thanks again to everyone that helped with troubleshooting this!

Message Format Not Supported - error message

If I receive an MMS message when connected to my Mercedes SAP module I receive a "Not text" SMS message on the car system. When I disconnect from the car I have a txt message stored on my SIM that looks as if it should redirect me to the Orange website to collect my MMS.
The problem is I have to copy the message to the phone memory to read it and when I try to read it I get the "Message Format Not Supported" error message.
Does anyone know how to correct this I don't want to loose any MMS received whilst driving!!
Message Edited by whitenemesis on 16-Mar-2008 02:10 PM

Could be related to the reducing of supported types that I just noticed the following today posted on their blog:
http://blog.share.ovi.com/twango/2009/10/you-have-spoken.html

Scanner Not Found Error Message on My Computer

5 years ago, I got an HP inkjet printer and after it was installed, I could never get the scanner to work. I always got an error message (can't remember the wording). Last month, I got a new HP laserjet printer with a scanner, and it is installed, but again, I get an error message when it comes to scanning. This message tells me that there is no scanner found on my computer.
Today, from the panel on the printer, I was able to open up the scanning option. It looks like the only options are to send the scan to an email or to have the scan sent to a flashdrive (USB port). So, if I want to scan a picture, how do I just scan the picture and save it in my documents? Why is the only option to send it in an email or a flashdrive or a network folder? If I try to access the scanner from my computer (instead of using the panel on the front of the printer), it doesn't look like the scanner is connected to the computer even though it is (I went into system preferences and found the printer and both printer and scanner are connected with this new printer).
So, my question is two-fold; why do I get this message saying my scanner is not found on my computer and is the only way to use the scanner is to have it connected to the internet or a USB port, and if so, how do I connect it to my email address or network? I guess I would have to email the scanned picture to myself if I want it on my computer or save it on a flash drive? Thanks for any help.
This question was solved.
View Solution.

Hi @awestruck ,
I see that you are getting a "scanner not found" error message. I would like to help you out today, but I will need to know some more information.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
Depending on which model you have, the features are different.
You should have the HP Software installed for scanning from the computer. You can also use Apple Preview, Apple Image Capture or Print & Scan.
What software are you using to scan with?
How is the printer connected? (USB/Ethernet/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Smart wi-fi browser not supported error by Linksys

Linksys seems to have created a doozy of an issue with this "browser not supported error" they keep displaying. Its as if head office is oblivious to this.
I am running IE 11 with all the updates applied and it gives the error. I downloaded firefox and it gives the same error. I downloaded Maxthon cloud browser most recent version and it does not work except when you log in with your cloud browser ID.
I have the latest version of Java 51 and cookies are enabled.
The strange thing about the Maxthon experience was when I logged out it continued to work. but when I went to another page and came back it stopped working.
There is something screwy in the linksys firmware here. they should have a bypass for this not so smart thing. Its really not worth the aggravation. Can anyone pinpoint where the issue is with this thing please?

Have you tried this?
-start with a turned off/powered down router
-turn on your PC and clear your browser cache with the router OFF
-prior to powering up the router... remove the WAN internet cable connecting the router to the cable modem or DSL unit.
-power on the router
-navigate to the correct ip address (probably 192.168.1.1 if there were no other routers in your network)
-now attempt to log in using the ACCESS ROUTER panel
-from now on it- local login should display as the main log in window with the smart wifi option in a panel below instead of the reverse which was the factory default.
-reconnect your wan cable and use as always.
-now the expectation is that you will always be able to log in through the ACCESS ROUTER panel locally.
Let me know if it works for you.

Video format not supported error

video format not supported error help

You get the error message when you try to sync your MOV / M4V / MP4 files from your iTunes to your iPad? The files are playable in iTunes?
Then, you'll need to change their so-called H.264 level to 4.1 or below. If you have a Mac, you'll need to use Subler. See http://www.iphonelife.com/blog/87/watching-videos-taken-max-roundup-mkv-mp4m4v-v ideo-converters for a complete tutorial; start at the paragraph starting with "After this, it's worth clicking the video track in the upper list if you want to play the video back in the stock Videos app on your iDevice and not in a third-party one".
The background explanation for all this is to be found at http://www.iphonelife.com/blog/87/making-stock-videos-application-play-every-mp4 -files-possible . Note that it uses other, more akward utilities to do the level fixing. Again, if you have a Mac, Subler is your friend.

CR9/Informix 7.4: "Not Supported" error

Hi All,
I've been racking my brain for the last day on this. I have a crystal report that has sub-reports, all data is collected from Informix stored procedures, but i'm receiving a very non-descript error "Not Supported" when trying to add any new subreports:
Main Report -> (storedproc_1)
--> SubReport (storedproc_2) Existing
--> SubReport2 (storedproc_3) Existing
--> SubReportNew (storedproc_4) NEW
When i run the above report, i get this "Not Supported" error pop-up about 4 times in a row on the page where SubReportNew is supposed to run. if i suppress this subreport it works fine and shows the first 2 subreports.
The Strange Part:
When i open the subreport and run it in isolation it works! Then if i run it from the main report it works fine. But once the document is closed and re-opened its back to not working.
When i put tracing on the stored procedure i find that Crystal isn't even calling it - it bombs out before that point.
Has anyone ever experienced this, or know how i can get more description on the error messages, is there a log somewhere with more detail?
Any help will be greatly appreciated.
Regards,
Trent

This thread can be closed. Although I did not find the cause of this problem, i did find a work around.
I was able to create new sub reports IF i import them from previously created reports - i was then able to change the datasource & create the reports i wanted.
The only thing i can think of is maybe a Windows release has changed some dependent DLLs and causing incompatibility issues. I say windows because we have not upgraded or installed any fixes for CR9 for over 2 years and never had this problem.

"original order" grouping is not supported.---- Error code:-2147215356

In one of my reports i need to display the data in original order.It is working fine when i run the crystal report,but when i integrate with java and check the report then it is giving the below error.
javax.servlet.ServletException: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Error loading report: "original order" grouping is not supported.---- Error code:-2147215356 Error code name:fileNotOpened
org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:850)
org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:779)

Hi Suhasini,
The JRC XI R2 (11.5) doesn't support "Original Order" grouping, however this functionality has been introduced in the latest version JRC -Crystal Reports for Eclipse
This version is available as a plug-in to the Eclipse IDE ad is available here:
http://diamond.businessobjects.com/eclipse
Note that you can use the same keycode you use for CR XI Release 2 with CR for Eclipse.
If you are not using the Eclipse IDE you can still used these jars as a drop-in replacement of the JRC XI R2 jars.
Kind Regards,
Flavio

JVM Vendor not supported error in NWDS.

I installed the NWDS 7.3 for customizing my portal 7.3 logon page. I am following an interesting blog for the same: Getting started with Netweaver 7.3 portal Part 2 - NWDS and Logon Page
However I am yet to complete this task successfully due to a JVM vendor not supported error. I have a JAVA_HOME entry to the javaw.exe path. Also, i have vm entry of the same path in the NWDS shortcut- properties- target value. C:Program Files (x86)Javajdk1.7.0_02 in
I chose program files (x86) for this installation bcos during my previous java error i read in my log that JVM 64 bit could not be run.
Initially i use to get JVM error during startup itself bcos of which i was not able to get to the home page of developer studio. I solved that error now by installing right version and making necessary entries as mentioned above. Now i get a pop up stating that oracle vendor is not supported (it says that i should have either a Sun or SAP provided java). Is it really the problem? If so, can some 1 get me the link to download it.
I am creating a new thread since the old ones posted by others on the same topic does not give me the solution.
Thanks in advance

Hi,
I also come to this warning. I did a little research, and found solution that worked for me by solving source of problem, without need of trying different JDK versions.
My current configuration:
SAP NWDS:
     - v7.30 EHP1 (7.31) SP10 PAT0001 (8.31.100001.140103092401 SP10 PAT0001)
     - file: "nwds-extsoa-7.3-EHP1-SP10-PAT0001-win32.zip"
     - Download location: https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/nw/731/doc/auto_latest_distributions.html
JDK:
     - v7 Update 51 - both x86 and x64 versions. As NWDS is x86 version, that platfotm is enought if you don't need native support for x64 applications.
     - Latest version download location: http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html
     - Older versions download location: http://www.oracle.com/technetwork/java/javase/archive-139210.html
     - I'm not suggesting that you need to install last version. I tested it on this version and it worked for me, but I use NWDS only for few specific tasks. So I did't test all functions for JVM compatibility. But my solution should work for solving cause of vendor specific problem. Not other JVM problems. And installing newer Java may be source of other problems, like is every release. But with correct backup there shouldn't be a problem.
Problem:
Problem is in older code of initial JVM check, where are specified allowed vendors. Oracle is not included in configuration, so warning is shown. Module is located in plugins folder:
     "<SAP NWDS>\plugins\com.sap.ide.jvm.check_1.0.0.140103091951.jar"
Version number (orange) can differs based on NWDS distribution. In jar file is configuration stored in file "config.xml". There is this part, that specifies allowed vendors:
<supportedRuntimes shutdownIfNotMatches="false" warnIfNotMatches="true">
    <vendor name="SAP AG">
        <versionRange jdkRequired="true" minInclusive="1.6.0_07"/>
    </vendor>
    <vendor name="Sun Microsystems Inc.">
        <versionRange jdkRequired="true" minInclusive="1.6.0_07"/>
    </vendor>
</supportedRuntimes
Here you can see that only "SAP AG" and "Sun Microsystems Inc." from older Java releases are included. And that's the problem, as new versions are released by Oracle. So vendor differs and warning is here.
Solution:
Before we begin it's best to backup whole NWDS directory and also workspace(s)!
1) Locate file with JVM checking module:
     "<SAP NWDS>\plugins\com.sap.ide.jvm.check_1.0.0.140103091951.jar"
    As mentioned before, version number can be different in your release.
2) Create backup copy of current file. Call it for example "com.sap.ide.jvm.check_1.0.0.140103091951.jar.BAK".
3) Copy original file to temporary location. I used "C:\Temp\com.sap.ide.jvm.check_1.0.0.140103091951.jar"
4) Extract files from JAR. JAR files are basically ZIP files. I used 7-zip program to extract source to folder based on file name:
"C:\Temp\com.sap.ide.jvm.check_1.0.0.140103091951\".
5) Locate and edit configuration file "C:\Temp\com.sap.ide.jvm.check_1.0.0.140103091951\config.xml". Add vendor node "Oracle Corporation" (part in green color). Just copy existing node and replace vendor name.
<supportedRuntimes shutdownIfNotMatches="false" warnIfNotMatches="true">
    <vendor name="SAP AG">
        <versionRange jdkRequired="true" minInclusive="1.6.0_07"/>
    </vendor>
    <vendor name="Sun Microsystems Inc.">
        <versionRange jdkRequired="true" minInclusive="1.6.0_07"/>
    </vendor>
    <vendor name="Oracle Corporation">
        <versionRange jdkRequired="true" minInclusive="1.6.0_07"/>
    </vendor>
</supportedRuntimes>
6) Pack directory. Pack whole content of directory from step 5) back to ZIP format. Change extension to .JAR in your favorite compression program, or rename new file from ".zip" to ".jar" after compression is done. Now we have our new corrected file for checking JVM version in NWDS - "C:\Temp\com.sap.ide.jvm.check_1.0.0.140103091951\com.sap.ide.jvm.check_1.0.0.140103091951.jar".
7) Replace original file. Copy file over original one:
"C:\Temp\com.sap.ide.jvm.check_1.0.0.140103091951\com.sap.ide.jvm.check_1.0.0.140103091951.jar" -->
"<SAP NWDS>\plugins\com.sap.ide.jvm.check_1.0.0.140103091951.jar". Overwrite if asked.
8) Done.

"Cannot play video - The Connected display is not supported" error message using Netflix 5.0.2 on my iPad

I'm running iOS 7.0.3 on my iPhone 4S and iPad (3rd gen) and have just upgraded to the current version of the Neflix app available in the Canadian App Store (5.0.2).
Although all other apps I've tried (e.g. Podcast, VLC) are able to properly output video & audio directly to my TV using the HDMI adapter (i.e. NOT via an Apple TV), the Netflix app pops up the error message "Cannot play video - The connected display is not supported". If I start a video and then plug the HDMI cable in, it will play for a few seconds and then halt with the same error message.
Netflix & Apple were supposed to have been working together to fix the previous issue with this scenario which was causing audio to be output but no video. The current Netflix app update was released yesterday and seems to have taken a step backward.
When I contacted Netflix support, they indicated that they have done whatever can be done from their side and this is now Apple's issue.
Any ideas?
Thanks!
Kiron

Hello all,
I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

HP 1005 scanner not supported error

Similar Messages

Maybe you are looking for