HP 3180 - "Detect Separate Items" stuck on

I have an HP3180 and am running 10.6.1. It appears to function correctly except that I cannot disable the "Detect Separate Items" function. I have tried scanning from Preview, Image Capture and directly from the control panel. I have reloaded the 10.6 drivers. I have rebooted. I have checked the box and unchecked the box until I am blue to no avail. Alas, I still get my scan chopped up and with some parts not scanned at all. I see that the C4480 has a nice new driver set v10.3, but there is none for the 3180. What to do.....

John,
Can you take a look and delete any of these files that exist:
~/Library/Preferences/ByHost/com.apple.Image_Capture.<some long number>.plist
~/Library/Preferences/ByHost/com.apple.ImageCapture2.<some long number>.plist
~/Library/Preferences/ByHost/com.apple.ImageCaptureExtension2.<some long number>.plist
~/Library/Preferences/Image_Capture.plist
~/Library/Preferences/com.apple.ImageCaptureApp.plist
Yes I know a couple of them were already on your list. If they are back, delete them again. Hopefully this will get you to a clean starting point.
Just trying to help.
Andrew

Similar Messages

  • Image capture and detect separate items

    I have a Lexmark Genesis S816 multifunction printer and am using Mac OSx 10.7.5.  I am trying to scan multiple photos and have an issue with "Detect Separate Items".  This feature works, but with odd quirks.
    With the details panel open, the initial scan works well.  On the second scan, I have multiple boxes on the screen and each picture is scanned multiple times.  The Use custom size check box is checked and I am saving the images as .jpeg with a resolution of 300 dpi.
    If I close the details panel, the images are scanned a single time, but I have no control over the size or position of the images.  If a picture has a light background, the automatic feature cuts off part of the picture, believing the image stopped at that point.
    Any suggestions
    Dave

    John,
    Can you take a look and delete any of these files that exist:
    ~/Library/Preferences/ByHost/com.apple.Image_Capture.<some long number>.plist
    ~/Library/Preferences/ByHost/com.apple.ImageCapture2.<some long number>.plist
    ~/Library/Preferences/ByHost/com.apple.ImageCaptureExtension2.<some long number>.plist
    ~/Library/Preferences/Image_Capture.plist
    ~/Library/Preferences/com.apple.ImageCaptureApp.plist
    Yes I know a couple of them were already on your list. If they are back, delete them again. Hopefully this will get you to a clean starting point.
    Just trying to help.
    Andrew

  • Detect Separate Items

    I have a Macbook Pro, v 10.6.6 and when I scan with my HP c309 printer/scanner it would not
    scan the entire document. Only one section. After playing with the settings I got it to work properly
    by selecting the   'Detect Separate Items'  checkbox. Now it scans the entire document as one.
    If I deselect the checkbox, it identifies only a small section of the document.
    I'm satisfied that is is operating correctly, but this setting seems reversed according to
    every help aid I could read. It should be the other way around- check the box to detect
    smaller areas of the document. My wife says sometimes I am losing it. Maybe she is
    finally right........

    I tried scanning text, photos, graphics, and all the combinations thereof. Now I've only tried scanning two items at a time. Items were separated by 1/4" to 1". It could be my specific printer driver that is the issue.
    You give me cause to believe that it can be done. Thanks for that.

  • Separate items

    I could have sworn Image capture would scan an image with the "Detect separate item" option and conform it right even though the item was not be even angle wise in the scanner.
    Now for some reason items don't get an even box and I can't straighten them unless I do it myself which won't be 100% accurate.
    I have used the angle line in the middle of the enclosing box but it is not 100% acturate also.
    Was I dreaming that image capture was making it easy for my or is some setting not right?
    BF

    I tried scanning text, photos, graphics, and all the combinations thereof. Now I've only tried scanning two items at a time. Items were separated by 1/4" to 1". It could be my specific printer driver that is the issue.
    You give me cause to believe that it can be done. Thanks for that.

  • Image capture won't scan some of "detect separate image"

    When put multiple photos on my scanner using "detect separate images, Image Capture recognizes each separate photo, but when it scans, some of the images come out black, and i have to rescan them.
    Any ideas?

    Thanks PAHU that were a lot of drivers for sure in your link and I installed those. Unfortunately, nor the driver package nor the ICA driver did solve my problem. I'm beginning to think it might just be a bug within Image Capture, although Image Capture is stating the scanner is reporting an error. Strange thing is that Image Capture will work fine as long as I hide the details pane.
    It seems to be an isolated problem too as I can't find any other subject on this on the net. I see more people having trouble to scan images with Image Capture but that's mostly related to not selecting the right part of the preview. I will see if I can reinstall Image Capture from the OSX dvd.

  • Image Capture: can it detect separate images for film / transparency?

    is there anyway to detect separate images while scanning film? this check box dissappears when selecting the dropdown SCAN MODE into anything but FLATBED.
    would be very useful when scanning film strips. thanks,
    -A

    I noticed after upgrading to Snow Leopard that images imported with Image Capture have "No Access" for Everyone.  I used Image Capture a lot under Leopard and Everyone had "Read Only" or "Read & Write" permissions.  Before and after the upgrade, I stored the images folders I created (with Image Capture) in a Shared/Pictures folder.
    I couldn't find any answers on why the permissions are set this way by Image Capture with Snow Leopard.  I found this article http://www.ehow.com/how_2314896_fix-permissions-mac-os-x.html which at least helped me change the permissions of all images in a given folder.
    Seems one should not have to change the permissions after importing images....
    iMac 2007, OSX 10.6.8

  • We have adobe suite and want to own separate items for separate individuals for portion of the suite is this ok?

    We have adobe e-learning suite license and want to own separate items for separate individuals for portion of the suite is this ok?  the primary owner doesn't utilize the photoshop person but we want to let someone else in our group utilize that portion

    no, only the licensee is legally allowed to use their purchased product.

  • Work item stucked on SAP inbox

    Hi Gurus,
    I have a problem on workflow items that are stucked on our approver's SAP inbox even after the PR or PO has already been approved/released. When I check the log, the status is still "In Process". This does not happen always and not for all our PR/PO docs.
    Can you help/guide me on where to look for the root cause so i'll know where to correct.
    Thanks,
    Marianne

    Hi MM,
    how is the PR/PO done for these workitems that are stuck?
    I mean was it sent to users SAP Inbox and he released it from his Inbox, or is it that though he got a workitem in his SAP Inbox, he released it thru ME54N/ME28N.
    Because in the later case, you have to define your WF such that if user directly releases them from the T-codes, it should terminate that WF so that it deletes from users SAP Inbox.
    Hope it helps.
    Aditya

  • PTO model item stuck at awaiting Fulfillment.

    Hi,
    I created an order with only PTO model item and no options and booked the order. Order Line followed the Line Flow-Generic, Bill Only process.
    Status is Awaiting Fulfillment..but even after running the WF Background process, it is stuck at awaiting fulfillment only.
    WF status monitor displays Notified at Fulfill Line node.
    I have checked for holds and fulfillment sets, they are not there.
    All pointers to the above problem are highly apprciated.
    Thanks,
    Rahul

    You may have a problem in how the model was setup or with the line type.
    1) Make sure that the line type is correct. Have you been able to ship PTO models using this line type?
    2) Go to BOM responsibility. Make sure you are in the org that is listed as warehouse on the sales order line. Open the INDENTED bom for the PTO item. Do you see option classes / ato models/ optional items. You have to have something there.
    Hope this answers your question
    Sandeep Gandhi
    Omkar Technologies Inc.
    Independent Techno-functional Consultant

  • Styling MenuBar drop-down (how to separate items with borders)

    Hi,
    I have a MenuBar with some drop down. I would like to
    separate each item in the drop down with a top/bottom border such
    as the below. How can I do this? I can't seem to get the right
    style.
    ROOTNode
    item1
    item2

    hi
    see this
    http://blog.flexexamples.com/2008/01/29/adding-a-horizontal-separator-to-a-flex-popupbutto n-controls-pop-up-menu/
    and this
    http://livedocs.adobe.com/flex/201/html/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Live Docs_Book_Parts&file=menucontrols_061_3.html

  • Windows Vista and HP Laserjet 6P--installed software but can't print. Item stuck in queue

    I have found plenty of answers to my problem relating to Windows 7 but not for Vista.
    I picked up a used HP Laserjet 6P which is supposed to be in working order.
    I attached the printer with a parallel port-USB adapter and installed the software using the HP Wizard. All looked good but when I go to print, the page stays in queue and the printer windows say Error.
    I tried using the HP diagnostic tool but it can't detect the Laserjet 6P.
    I tried setting up via a different USB port (USB001 Virtual Port) and creating a new one (Standard TCP/IP Port) but neither worked.
    Any idea how I can make this work or is is just too outdated?
    Thank you

    Hi @harleywish 
    I wonder if the issue might be related to the print spooler rather than a port. Please try bypassing the spooler to see if you can print directly to the printer.
    1. Click on start and go to devices and printers.
    2. Right click on  the printer and click on printer properties.
    3. Choose the option "Print directly to the printer".
    4. Click apply and then ok.
    If this works follow the next steps and try to print again.
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box
    Type services.msc and press Enter
    Locate Print Spooler and double click on it to open the Spooler properties 
    Make sure startup type is set to Automatic, if it is not please click on the drop down and choose Automatic
    Under Service status, please Stop the server, and then wait a moment and click Start
    If bypassing the spooler does not result in a successful print, let me know.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Out of stock item STUCK in cart!

    Tried multiple browsers and OS's. There's a single item in my cart and it's OOS. When I click "Remove this item" it never actually leaves my cart. I can't actually make any purchases until this is fixed because when clicking "Check Out" it wants you to remove the item from the cart that is out of stock.

    Hello MichaelG,
    Not being able to remove items from your cart, which in turn prevents you from purchasing other items, does sound quite frustrating, and I'm very sorry to hear this has happened to you. I would be happy to see how I can assist.
    It seems that in previous instances this issue has resolved itself after about 24-48 hours. With that said, there are certainly some things you can do that may also help alleviate this. We suggest performing these tasks in the order listed:
    Log out of your BestBuy.com account
    Clear all cookies, cache, and history information from your browser
    Add the item you’re wanting to purchase to your cart (currently as a guest)
    Go to the checkout page and login to your account as a returning customer
    Attempt to remove the previously unavailable item if it’s still there
    After performing these steps, please let me know if this was successful! If not, I would suggest trying a different browser all together, or trying on our mobile website via a smartphone.
    I hope this information is helpful, and please do not hesitate to let me know if you need further assistance. 
    Thanks for posting! 
    Maria|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Jquery - Detect Page / Item Change

    Hi Guys,
    I am aware of the skillbuilders save before exit plugin but I was wondering if there is a stripped down version, maybe some Jquery to identify if a Page has had any changes made.
    For example if an item on a page is accessed / changed in anyway then an hidden item is set with a flag?
    Thanks All

    No need to reinvent really. If you know about the Skillbuilders plugin, you probably have tried it out already. Their plugins come with good documentation and the source files.
    In the documentation the "changeDetected" procedure is explained:
    The changeDetected method can be used to check elements (not set to ignore) to see if they have changed since the page loaded. It can be called as follows (returns Boolean):
    $(document).apex_save_before_exit('changeDetected');
    Knowing this, you can take a look at the source javascript (apex_save_before_exit.js). The changeDetected function does exactly what you want and would need very minimal adjusting.
    Start with removing
    .not(uiw.options.ignoreChangeSelector)The code also doesn't do anything wild: everything used is standard, such as the defaultValue attribute on text input items.
    Only shuttles are a small exception as they have no standard defaults that can be checked against, and that is why in the "_create" of the plugin these values are stored in a data attribute on the shuttle:
          $('form#wwvFlowForm fieldset.shuttle')
             .not(uiw.options.ignoreChangeSelector)
             .each(function() {
                var loadVal = $v(this.id);
                $(this).data('apex-sbe-load-val', loadVal);
             });You can leave it like that, or rename the data attribute (and change it in the changeDetected attribute).
    If you want to check single items, the function shows you everything you need to check any type of item.

  • Item stuck in the sim opening hole.

    The place where you put a paper clip/sim opening device there is now an object stuck in there and I am unable to open the sim slot. What shall I do?

    probably take it to an Apple retail store genius bar

  • IPhone not being detected by computer, stuck in DFU mode. Please help.

    My iPhone is not being detected by my computer. I have uninstalled and reinstalled iTunes 3 times to no avail. This occurred during a restore in which the computer lost connection to the phone and left it in DFU mode. Please help. I also must add that my lock button is broken as well.

    If your button is broken there's probably no way to recover the phone. You will need to get the hardware problem resolved first.

Maybe you are looking for