HP 8600 scan-to-web : scans fine, but then saves a blank file
I have an HP 8600 which I am trying to use to webscan because I am using it from linux.
The scan works fine, the scanned image shows up on the screen fine.
When I try to save it, I get a blank file (.jpg).
It also doesn't ave with PDF either, or gives a squashed PDF file that is 4x wider than it is tall.
I am running with a new version of Google Chrome, Version 37.0.2062.94 (64-bit). I finally gave up on chrome and got it to work with Firefox. I don't think your javascript is working properly in the newest version of Google Chrome.
Hello @systemBuilder00 , and welcome to the HP Forums.
I understand you are experiencing Linux scan issues. I would like to try and assist.
If you are connected via wireless, I would recommend this document on Getting the Latest Firmware and Product Updates.
I would also recommend the following link:
HP Linux Imaging and Printing
If that doesn't resolve the issue, I would recommend utilizing the Linux Support Forums.
Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.
Similar Messages
-
HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures.
HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures. Using the printer completely unconnected from a pc or network, using a SSD memory card to print off. As the printer begins the print, the printer prints only about 3/4 of the image, and clips the rest leaving it blank. Within the options, you can see the whole picture on the LCD screen, and selecting the 4x6 print mode it still clips the picture.
Not sure exactly whats going on, the printer was doing this fine for about a year, and just randomly started to print with the image cut off at the beging and ending abruptly at the end only printing half-3/4's. Also using the same memory card, have not tried a different card though. Any ideas?As far as I know, you cannot scan or perform software-based copying over a Bluetooth connection. Printing is doable. Perhaps that is something that is in the pipe for developement.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
My ipod froze so I restarted it, but then it happened again, so I restarted it again, and it was fine but then it ran out of battery. Now when I plug it into the charger it, the Apple sign comes up for 5 seconds then disappears, it doesn't turn on or come up with the charging sign. Is it not going to work again, or is ther something I can do? Please help.
I have the same problem, and my Ipod turned off (when I held the home and power button)
but then when I held down the home button (after turned off) nothing happened, the screen is still black.
Do you know what I should maybe do?
Thanks is advance -
I own a I phone 4. I recently changed my service from AT&T to Straight Talk. It was working fine but then I deleted the vpn file on accident. Now when I try to get on line I get a message that I am not signed up with a cellular data network. Does anyone know how I can retrieve or download the vpn file?
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together
You have a hardware problem and you should take it into a apple store to be looked at and fixed.
-
New user here. Trying to import iPhoto 9.4.2 libraries into Aperture 3.4.3 as referenced files. When accessing File>Import>Library, it finds the iPhoto library just fine, but then imports it as Master files. No option that I can find to leave the photos in place on the file system. All the literature says their should be an option to choose, but I never get that option. What?
All the literature says their should be an option to choose, but I never get that option.
That has been true for the previous Aperture versions. Now Aperture simply treats the original image files exactly as they are in the imported library. Referenced images will stay referenced, managed will be imported as managed. But you can always relocate the imported managed images afterwards by using "File > Relocate".
Regards
Léonie -
I have an iPhone 6. For the first two weeks my bluetooth worked fine but then started having issues. Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls. The radio continues to play. Please help!
Hello there, Srushevics.
It sounds like you may be having issues with the connectivity of your iPhone with the Bluetooth in your vehicle. The following Knowledge Base article offers up some great steps for troubleshooting that Bluetooth connectivity with your iOS device:
If you can’t use a Bluetooth accessory or car kit
To resolve the issue, you'll need to first sign in to iCloud and review your devices:
Sign in to iCloud on your iOS devices and Macs with OS X Yosemite (available this fall).
On one of your devices, tap Settings > Bluetooth and look under My Devices. You'll see all devices that are connected to Bluetooth, but make sure that you see your Apple devices that are signed in to iCloud and are using iOS 8 or OS X Yosemite.
Sign out of your iCloud account from any devices that you don't want to use. To sign out of iCloud on an iOS device, tap Settings > iCloud > Sign Out.
Then, remove any inactive devices from iCloud:
Sign in to iCloud.com.
Select Find My iPhone.
Select any devices that aren't active anymore.
Wait for Find My iPhone to stop trying to find the inactive device.
You should see the option to remove this device from your account. Select it to remove the device.
After following the steps above, restart the device with the issue. Then try to use it with your Bluetooth accessory.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have bought a new iPad 2 charger and it works absolutely fine but then I wanted to upload some pictures on the computer so I put the wire in the right places but it doesn't work so I tried my iPhone and it worked fine?
Plz answer as soon as possible
-
I needed memory to upgrade so I exported all of my iphoto to an external hard drive. I then deleted and emptied the trash. The photos are fine but the videos are blank. Is there any way to recover the videos? Any software recovery programs apple supported?
no official way but if you open the Apple TV and put the hd in the external case it should mount and give you access to the data on it
-
my ipad will not sync or back-up and thus cannot install OS5, it starts fine, but then says "cannot verify applications" and stops sync. Can someone help me?
going to "transfer purchases' does work - however the thermometer bar at the bottom reflecting apps, music, video, book, etc cpapcity fraks out, sliding left to right maybe 4 or 5 times during the process. Have you ever seen this?
After it is finished, the SYNC button is not longer darkened - so I thought it was safe to attampt an upgrade to OS05... which i am doing now... takes maybe 20 mins and then I normally get the error "the applications on this ipad cannot be verified" and the bottom thermometer bar zeros out all by my music. The content and apps are all fine on teh ipad. so strange. I made an appointment with customer service tomrrow AM - but i do not think i should have to pay for this - i have never even used support before!
I will update if it works - or re[eats the strange pattern again and does not update.
Thanks for your time and help! -
My daughter's ipod nano shows up in "devices" when I plug it in...but it disappears. Right away it says it needs to update, but then after extracting the files it comes back and says that it can't be updated because it can't be unmounted. help?!
When in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.
-
Airdrop receives file on iPad but then can't find file anywhere. Help please?
Hi,
Any help on this would be hugely appreciated.
Have been trying repeatedly to send a video file from an iPhone 5s to the latest iPad using Airdrop.
Everything works: devices are recognised, file is sent all the way to the 'tick' symbol appearing on the iPad and the iPhone says the file is sent.
BUT
Then nothing happens, no file opens, and I can't find it in any albums (photos, videos or otherwise) on the recipient iPad.
I haven't come across this on the forums yet so I'm hoping someone from Apple can help.
Thanks in advance!By and large, we aren't Apple here, just other users trying to help each other. The few actual employees, who are here mostly to keep the forums working smoothly, only rarely offer help, mostly from canned help documents.
A file transferred by AirDrop should wind up in the same app that sent it. For example, if you sent a video using the Photos app, it will wind up in the Photos app, specifically in the Camera Roll. I just verified that it works that way from my iPhone5 to my iPad Air (both on 7.0.6).
If that's not how it is working for you, please tell us the app you are using to send the video, the iOS level on each of the two devices, and anything else you think might help somebody here assist you. (It might well not be me.) -
MacBook Pro scans images fine, but only saves as gray page with banding
I purchased a new MacBook Pro recently. I used my HP Deskjet F4580 to scan with my old MacBook and it worked fine. Now when I scan the image it appears fine on my screen, but when I go to save, there is no trace of the image, just a full gray page with some banding. I tried another printer/scanner: HP Officejet 7310 and I got the same results. I have tried saving as a pdf, jpeg, png. I read other ways to operate the scanner with a Mac, still no success. I would appreciate any help. Thank you.
Hi Julie,
In order to help you better. Would you let me know which application/Service of Adobe you are using?
And what are you steps to scan the file and save it. And if you are using any Non-Adobe application to scan the documents are you able to save them perfectly?
Regards,
Ajlan Huda. -
Good morning all!
I am trying to publish a fillable form to a website for users to fill out. The trouble is that I myself can fill out the form when I click the link, and save it using the disc icon. However when I have other users click it, they can fill out the form on the PDF in the internet browser, but cannot save it using the disc icon that pops up on the bottom right hand corner. I discovered that if I Save As Adobe PDF, it will save my information. When I try using the disc icon to save a physical copy, the information is completely missing from the field in the PDF, as if I never filled it out before.
Since other users of all walks are going to be using it, I can't exactly give explicit instructions on how to use the work around for this, since it's intuitive to click the disc icon. Can anyone offer help regarding this issue?
Some other pieces of information:
I am using the Save as Other -> Reader Extended PDF -> Enable More Tools (Includes form fill-in and save), yet users cannot save the information typed in on the web browser PDF form.
Thank you for your time and help.https://gsbs.uth.edu/dotAsset/93e2c3b0-ca8d-4335-b053-c608eb79def0.pdf
Thanks for your reply.
We're using Adobe Acrobat XI Pro 11.0.10 (Latest update)
This looks to be the only PDF with the issue on fillable forms, but we have not yet posted any others with this issue.
From that link, you can fill out the form, but when you click the pop up Disc icon on the bottom right, it does not save your typed in information. This happens on Firefox, Chrome, and IE. However when you click the print icon and Print as PDF, it saves the information you typed in.
Thank you for your help. -
Urgent : everything works fine, but cannot find a .jpg file
This is my first attemp at creating a jar file and running the running the program
i created a jar file ran it, everything works fine but when i click the about menuitem, it throws a java nullpointer exception,
it says it cannot find the .jpg file that is used for the about box,
the code works fine if i run as a normal program i.e
java <somepackage>/<classname>
javax.swing.ImageIcon aboutimage;//in the constructor
try{
aboutimage = new javax.swing.ImageIcon(getClass().getResource("resources/image/"+"About.jpg")); //-- exception at this line
}catch(Exception e){
e.printStackTrace();
}i post a bit more details in case sm1 might want to refer,
Thanks in advance ..it's a bit long sorry for the inconv.
I created a jar file this way,
- first created the Manifest.txt file and added the the main class,
follwed steps from the tutorial at sun:
http://java.sun.com/docs/books/tutorial/deployment/jar/appman.html
then this at command prompt
jar cfm Aid.jar Manifest.txt IDTT/
Now when i run the jar file every thing runs fine except for the About.jpg,
that file doesn't show up when i click the about button in the application
Everything works fine when i directly run the file from command prompt as java IDTT/Aid
Error recieved:
Exception in thread "AWT-EventQueue-0"
java.lang.NullPointerException
at javax.swing.ImageIcon.<init>(Unknown Source)
at IDTT.Aid$AboutPanel.<init>(Aid.java:336)
at IDTT.Aid.menuItem_AboutActionPerformed
(Aid.java:304)
this is line 336 in Aid.java:
javax.swing.ImageIcon aboutimage = new javax.swing.ImageIcon(getClass().getResource("resources/"+"About.jpg"));
Aid.java has package as
package IDTT,
the files in folder graph
have package as
package IDTT.graph
"resources" is a normal folder that has a image file called About.jpg
and another folder called "html" that contains many html files.
there's no error for html files
This is the package/folder tree structure
IDTT
|
|- Aid.java (has main)
|
|- graph (a package that Aid.java uses)
|
|_ resources
|
|- image
| |--- About.jpg
|
|- html
Maybe you are looking for
-
My troubles with Markers in Premiere
I’m editing a feature documentary in Adobe Premiere CC (latest update) on my MacBook Pro 2014 w/ Mavericks. I have about 100 hours of source footage that I’m logging using Comment Markers in Premiere. The problem I’m facing in this workflow is dealin
-
I need to change my find iPad pass code how do I do it??
I already locked my step sons ipad once and I need to lock it again with a diff passcode but there is no option how do I change it??
-
ITEM_TYPE 'WFSTD' is protected, no changes were saved.
Dear friends, When I use "WFLOAD $fndunpw 0 Y UPGRADE ./xxcub/import/FAAPPROV.wft |tee -a $LOGFILE" to upload a customization.The error message as follows: Should the Access level is too low.Need I change the access level using Oracle Workflow Builde
-
iPhoto Slideshow: Sometimes the slideshow starts at the last image, rather than the first. How do I ensure the slideshow commences at the first image?
-
Maintenance Order creation control
Is there a way to control that a Maintenance Order could be created only if the notification is already put in progress? Not if the notification is on status u201COutstanding notificationu201D. Iu2019ve tried to do it by security access but didnu2019