HP 8753ES 'block input error' when recalling state

Question

I use HP8753 save/recall state.vi to save and recall state with the HP
8753ES network analyzer. I try to recall state back into the analyzer.
Saving is fine, but when recalling state, I get 'Block Input Error'. I
tried changing '1' to '0' at the Exclusive-OR in Write Text to
Screen.vi in HP 8753 save/recall state as Sastry recommended on
Lilach's question, but it doesn't work. I even take the write text to
screen.vi off and modify the vi to run without it, but it still
doesn't work. Can you advice me how to recall state properly? Thanks

Answer 1

Hi,
a post from Paris, with cloudy weather :-(
learn string of HP8753ES is 7656 bytes long. So 5000 bytes used to read
the VISA ressource are not enough and must be increased to 8000. After
that, HP8753 Save/Recall State.vi works fine here. I hope it will be the
same for you...
Daniel
Rung a écrit:
> I use HP8753 save/recall state.vi to save and recall state with the HP
> 8753ES network analyzer. I try to recall state back into the analyzer.
> Saving is fine, but when recalling state, I get 'Block Input Error'. I
> tried changing '1' to '0' at the Exclusive-OR in Write Text to
> Screen.vi in HP 8753 save/recall state as Sastry recommended on
> Lilach's question, but it doesn't work. I even take the write text to
> screen.vi off and modify the vi to run wi
thout it, but it still
> doesn't work. Can you advice me how to recall state properly? Thanks