Hp color laserjet cp2025 goes into cleaning/calibration in the middle of print job.

HP Color LaserJet CP2025dn will be printing and suddenly stop and go into either a cleaning or calibration routine for no apparent reason.  This will last 5-10 minutes and then the print job will resume.  They will do this sometimes 2-3 times a day.  I provide IT support for a medium business, we are an all HP print shop, I have a lot of other models of color and mono LaserJets and no other model does this to my knowledge.  We have 3 CP2025dns and they all do it and it's driving our execs mad and I'm being asked to replace them.  Can you do anything to help me save the day?  Thanks.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • HP Color LaserJet CP2025 - Possible to use just black toner for black print?

    It appears that this printer utlizes all of the color toner cartridges (including black) to print what is just plain old black.  Not sure if it matters but we are running on Mac OS X.  This is a terrible waste of color toner when 99% of our printing is black and white.  Is there a way to change this?  I've not been able to find it if there is, so would appreciate any help.  Thanks!

    I am having the same problem! Please share if you find an answer.

  • HP Color LaserJet CP2025 is listed as Offline

    Our HP Color LaserJet CP2025 was bought in the middle of November, 2011 and has been working fine since then. I set it up with a static IP address and no one has had troubles connecting or printing until yesterday. All of a sudden the printer is listed as offline for everyone. A reboot of the printer will sometimes allow it to print one job and then go back to offline. Any time it is attached via USB, it works like a charm. I've uninstalled and reinstalled the driver/printer, I've updated the firmware, I've ran the HP Print Diagnostic Utility and it says that everything is fine, I've plugged it into different switches and none of them work. I'm lost and out of ideas. Any help?
    I'm currently running Vista Ultimate 64bit but it has shown up as offline on all the XP and 7 computers as well.
    This question was solved.
    View Solution.

    I figured it out. I set a static IP on the printer but didn't reserve the IP for it on my DHCP server so someone else had take the address. As soon as I changed the IP it worked great. 

  • Color LaserJet CP2025

    I have an HP Color LaserJet CP2025 printer.  The Status of the printer is "No Toner/Ink".  However, I have replaced low ink toner.  I still continue to receive this message.  Unfortunately, I'm not able to print either.  I'm guessing because of the Status message.
    Furthermore, I printed a Supplies Status Page.  Each catridge is at 50% or higher.
    Any suggestions?
    Thanks.

    The driver is useless on Windows 7. HP has failed with this one. That aside, I found in my case I could go into the printer's properties and create a new port. I'm using my HP2025 over the network so I created a new standard TCP/IP port with the printer's IP address. As soon as I hit apply it started printing. This redirects the printer from the flawed UPD port to a real IP "port"
    HP really should put more effort into their UPD design on Windows 7. I can't say enough about how horrible it is.

  • HP Color LAserjet CP2025

    I have a HP Color LaserJet CP2025 that randomly re-calibrates itself.  I have update the firmware, tried redownloading and installing the drivers, it doesnt have any extra RAM in it so thats not the problem(will be putting some in there to see if that helps). Was wondering if anyone had a guess???

    All HP printers will perform regular maintenance as the printer feels is necessary.  Normally there are 2 criterea for maintenance and calibration, time and number of jobs.  As your printer exceeds these quotas it will trigger the appropriate maintenance to keep the printer alive and accurate. You would have to give us more information to help us identify if what you are asking about is normal behavior or not.  For example, how often does it occur or after how many jobs?  

  • Driver for HP Color LaserJet CP2025 for Windows 7 64 bit

    I just purchased an HP Color LaserJet CP2025  for my computer running Windows 7, 64 bit as an OS. The driver disk does not include that OS and the Driver Support page does not specify which driver to use in order to take full advantage of the automatic two sided color printing capability. Any help out there?

    I am having the same problem! Please share if you find an answer.

  • Driver for hp color laserjet cp2025 windows 7 32 bit

    I just bought a refurbished Dell Optiplex 755 32 bit with Windows 7.   I have a hp color laserjet CP2025.  The icon appears in devices & printers  window as unspecified, category unknown yet the model no. appears correctly as CP2025.  It has a USB connection that loads a driver automatically.  I can't print a test page etc.  After I powered the system up initally I was able to print a test page but after 200 or so updates I can't do anything with the printer.
    This question was solved.
    View Solution.

    Hi,   FYI    I don't think my USB printer is supported in the latest version of Windows 7.  Tnx., Ray

  • HP Color LaserJet CP2025 Printing Issue

    HP Color LaserJet CP2025 - prints only in B&W - how do I set the printer to print in color?
    The latest driver has been installed.

    Hi Yahootie, 
    This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links. 
    http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support 
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413 
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Color LaserJet CP2025 Printer - Vertical Yellow Band printing on every page

    For the last several weeks whenever I print from my HP Color LaserJet CP2025 Printer the pages print with a vertical yellow band on the right hand side of each page. I checked the supplies status and it says each ink cartridge has plenty of ink left so I'm at a loss as to what could be causing this yellow band. I'm wondering if it has something to do with the printer's hardware (inside roller perhaps)? 
    Any insight would be most appreciated.

    Hi there cdyson44, Welcome to the Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital Imaging/ct-p/bsc-412
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP color laserjet CP2025 will not print. Help.

    I have a HP color laserjet CP2025, but it will not print. I installed the driver HP Color LaserJet CP2020 Series PCL 6. I have a Windows Vista Home Premium. There is a message to replace the cyan cartridge, but I assume if the printer has black ink, then it'll print in black and white. Do I need to replace the cyan cartiridge for it to print? What other options can I try to troubleshoot?
    Thank you.

    @kesler 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

    HP Color LaserJet CP2025  / Windows 7(64bit)-Why the printer does not print color letters??

    Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

  • Can I bypass color printing on HP Color LaserJet CP2025

    We have purchased a new wireless HP LaserJet Pro 400 printer to replace the Color LaserJet CP2025.  However we still have one new toner cartridge from a double package of black toner for the 2025.  I want to continue using the 2025 until I use up all the toner but it is flashing that I have to replace the magenta cartridge and won't print.  Is there a way to bypass color printing on this printer and have a function just as a black ink printer until I use up my remaining toner?

    Go thru the menus.  I think under the print quality menu there is a setting for supplies where you can have the printer continue to print when the cartridge is empty.  Just change the setting and the printer will continue to print even if all the color toners are empty.  For your information there are always about 100-200 pages left when the printer says the toner is empty.

  • HP Color LaserJet 2605dn going offline for no apparent reason. Need help!

    There are four of us with these printers in our finance department.  Two PC's are running Windows Vista and two Windows 7.  The printers are networked but installed locally on each PC.  Routinely all of these printers will go offline at the same time and there seems to be nothing that helps.  Our IT's answer is to buy four new printers but these printers work great when they're working.  There has to be a solution to this mystery out there somewhere.  I would appreciate any suggestions.

    Hi JThorne,
    The HP Color LaserJet 2605dn is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • HP Color LaserJet CP2025 Will Not Print in Color

    I switched to black print only when I ran out of the color yellow. At $124.00 a pop at any outlet it was more than I could afford. After six months I had enough money to buy the cartridage but now the printer won't print color. The test page prints in color but nothing sent from my HP computer prints in color. What do I need to do? The options for "devices," printer are so sparse I don't know what to do. What a crappy deal for the consumer.

    USB-Parallel converters can be problematic.  The models listed in posts flagged here have been verified by users to work with 64 bit Windows 7.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Can't install printer driver: HP Color LaserJet 2605dn drivers "not currently available from the Software Update server"

    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!

    Sean L. wrote:
    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!
    The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
    Printer on, and if networked, use a static IP address
    Print & Scan
    IP
    Provide printer static IP address
    Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
    Add
    Configure Driver under Options and Supplies
    I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
    Hopefully, you have already sorted this out.

Maybe you are looking for

  • How do I uninstall unwanted program or go back to a previous state?

    I have a Canon MP640. I found a Mac install dis that I didn't realise I had I tried to install. It reported that it failed  Now I notice some scan program icon on my top bar I dont want it I can see it in the applications folder + I have no idea what

  • Help please with wrangling Windows 7 fonts

    This may seem off-topic, but I'm hoping the practical expertise of posters here in working with fonts might provide some insight.  I've posted in Windows-centric forums, but most general users seem not to understand font issues, so couldn't respond. 

  • 5610 radio losing stations

    I've had my 5610 since January, and just recently it suddenly lost the ability to tune into any radio stations. (i.e changing the frequency didn't seem to be actually changing the frequency). Anyway, after much stuffing around I did a full factory re

  • Comment mesurer un fréqunce avec une carte pxi-6602?

     Bonjour, Je cherche grâce à une carte PXI 6602 à mesurer la fréquence d'une signal périodique. Cette carte possèdent 8 compteur/timer, et je suis déja parvenu à genérer des trains d'impulsion sur ces compteurs. Néanmoins je ne parviens pas à mesurer

  • Workflow for Purchase order

    Hi, Can anyone let me know the steps to activate workflow for purchase order so that workflow will be triggered after creation of PO and for any modification done after release. What are the customization and tcodes required for PO workflow and is th