HP Device Monitor

I'm using a model 10,1 iMac with 8GB of ram, running Mavericks 10.9.5. I have a Photosmart 8450 (5 or 6 years old) and a Photosmart 7525 (1 year old).
Anout two weeks ago HP Device Monitor took over my iMac, with the result that it's very slow (strangely, it's seems to be even slower when I go to HP Support forums). The fixes I've read about here in the forums have not worked for me. What can I do to have my iMac be normal again?

Hi Dan40,
Did you try the fix on this post and this one? Scroll down to the post by stix4, looks like it has worked for this problem. If it doesn't work for you, let me know and I'll do a little more research
Say "thanks" by clicking the Kudos thumbs up!
Was your question answered? Mark it as an Accepted Solution!
I work on behalf of HP

Similar Messages

Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

Error message HP Device Monitor quit unexpectedly will not go away! Help please.

Hi, I deleted our old HP Printer from MAC and loaded the new one. Now I'm getting an error message constantly. Sending report, Ignoring, Relaunch - nothing gets rid of it. Also rebooted computer, turned it off, and unplugged new printer all to no avail. Hitting relaunching button makes it message disappear, but nothing relaunches. HELP.
Thank you.

Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.
Or, while in Safe Mode...
Get Find Any File...
http://apps.tempel.org/FindAnyFile/
Search for Name contains...
HP Device Monitor
Hold Option or alt key when selecting Find to Find All.
Trash the .plist & reboot.

"HP Device Monitor quit unexpectedly" on a Mac

I accidentally installed the wrong printer software for my all in one printer and every since then i have a constant pop up message that reads "HP Device Monitor quit unexpectedly" it is very frustration and I have already tried going through all the hp files i could find and bring them to trash and it didnt work
I have a mac with os x version 10.5.8, 2.53 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3. Please help!
This question was solved.
View Solution.

Do you have a Hewlett-Packard folder in your Applications folder? Is there an uninstaller in that folder?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

LMS CiscoWorks 3.2 CPU 100 % on devices monitored

HI,
it's possible that LMS CiscoWorks influenced devices performance? On devices monitored from CiscoWorks CPU reached peaks of 100% of utilization.
If i stop Ciscoworks they work normally.
Thanks

Yes, it is possible. Device bugs can exist that cause high CPU when certain MIB objects are polled. There may also be other factors that can lead to high CPU when a device is polled with SNMP. For example, routers will large ARP caches may see CPU spikes when User Tracking polls the devices during acquisition. In these cases, SNMP views can be applied to restrict those MIB branches from being polled.
To determine what MIB objects are leading to CPU spikes, the output of "show stack PID" is required when the CPU is spiking (where PID is the process ID of the SNMP ENGINE and IP SNMP processes). In addition to this, the show version and show region output are required.

HP Device Monitor... pop up

Hello,
Can anybody please inform me how to get rid off the pop up "HP Device Monitor is closed...."
Thanks

Hi, I think it's likely a hidden file running...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Fortigate Device Monitoring with SNMP

HI
I have SCOM 2012 R2 in my environment. I want to do network device monitoring for Fortigate routers\firewalls. I have configured all firewall ports between my management server and fortigate device. I have created SNMP v1,v2 run as account and have added
community string in network device as well. When i create the rule and run it, my fortigate device appears in the Network Device Pending management. On alerts pane i can see that the rule discovery is failing. The error log says there might be problem in credentials
or firewall settings. But i have configured all of them properly. Please help

Hi,
Please refer to the link below:
How to Discover Network Devices in Operations Manager
https://technet.microsoft.com/en-us/library/hh278846.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What is NI Device Monitor?

I cannot find any documentation on the NI Device Monitor that sits in the system tray. I don't need it (?) so I want to get rid of it. But how do I restart it if I do need it? I cannot find a shortcut installed in the menu and no reference to it in any of the settings. A search of NI website doesn't even come up with a hit.

From what I understand, the NI Device Monitor is a service that will launch certain NI Software if an NI USB device (like a USB DAQ device) is plugged in. I'm no expert on this stuff, but in the past, when there's been a service running on my machine, I go to Control Panel > Administrative Tools > Services and change the service from Automatic to Disabled. If I need the service in the future (like in your case, if you ever buy an NI USB DAQ device), change the service back to Automatic.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Device Monitor - Black except for Storage tab

Hi,
My Device Monitor (from Quick Settings) is completely blank except for the Storage tab. That means Battery, CPU, and Memory are all not loading properly.
Any suggestions?
Merci!
Solved!
Go to Solution.

Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Device monitor at apps with usage access

In my 'apps with usage access' I see device monitor ticked by default. What would happen if I unticked it?

http://forum.xda-developers.com/showthread.php?t=1089470
http://forum.xda-developers.com/showthread.php?t=2429827
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Best Practices for ASA 5500 Device Monitoring

I have looked high and low and am unable to find anything on this topic. I am hoping that somebody here may be able to share some insight into what are considered the best practices for monitoring ASA's--specifically the 5510 with Sec+ License.
My current monitoring application keeps reporting issues with outbound interface buffers being too high, but there are not any performance issues and I believe the thresholds are just set absurdly low.
Thank you in advance for any assistance.

Hi James,
You probably won't be able to find any all-encompassing documentation for these types of best practices that cover all scenarios. The better method would be to define exactly what items you'd like to monitor and we can provide some guidance on how to best get that working for you.
-Mike

Q10 Device Monitor - Small suggestions about drop-down menu.

It would be nice if the drop-down menu would remember my previous choice (last 48 hours) and also offer an additional choice of "last 7 days".
ics.com - Where Qt experts work.

Hi!
Thanks for sharing! Don't forget that you can also submit your Ideas on the The BlackBerry Innovation Community. Cheers!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

The application HP device monitor quit unexpectedly window keeps popping up

Help
I installed driver from HP for my version 10.5.8 and I now get the above message popping up every 5 seconds and I cannot get the printer to work. How can I remove this message and get printer to work wirelessly? I have removed all the files (HP) I can find and restarted comupter but message keeps coming up.
I am very frustrated.

This can depend on whether your iMac running Leopard 10.5.8 is an older PPC (G4 or G5) iMac or a post-2006 Intel based iMac.
They would need different printer drivers - check with HP that you have the right one.

Device Storage Almost Full

Hi. I've had a Blackberry Z30, current OS 10.2.1.3062, since late April 2014. In the last couple of days I've had notifications about the "Device Storage Almost Full".
I've done a complete security wipe to try to resolve this issue (as advised on another forum). I've tried a Factory reset (as advised on another forum - a Google search reveals lots of fellow BB owners with an identical issue, but so far no actual explanations as to what's happening, or solutions that work for me!). I have NO documents, videos, music, or any other downloaded files saved on my phone, and minimal apps too. The largest app is The Sims FreePlay - 785.4, and total storage listed for apps is 1.84Gb
Each time, I reinstall fewer and fewer apps, yet over an hour or more, I can actually look at the Device Monitor periodically and watch the Storage being filled up with more and more 'System' files, whatever these may be! If I look at the Device Monitor, Memory, System, it shows that during the night, when I am in 'Bedside Mode' in the last two days it has downloaded 9.5Gb of data - this drops to almost nothing during the day when I'm actually USING the phone. However, this evening, I recorded the following stats, with no corresponding download of data over wi-fi during the same period, so I'm not sure if these two things are actually related!
The stats were:
18:28 - Just backed up the phone, not being actively used by me, Wi-fi switched off for test purposes, mobile network still connected
Storage showed at 18:28: System - 1.77Gb, Apps - 1.83Gb, User - 135Mb, Free - 9.45Gb
18:31 - Wi-fi turned on, played Sims FreePlay for 30 minutes
19:04 - Device Monitor checked
Storage showed at 19:04: System - 3.58Gb
19:04-19:24 - Switched to Bedside Mode for test purposes
Storage showed at 19:24: System - 8.63Gb
19:25-19:30 - Phone not being actively used
Storage showed at 19:30: System - 9.79Gb
19:31 - Received notification "Device storage almost full"
Storage showed: System - 10.12Gb
Currently at System 10.97Gb, User - 134Mb, Apps - 1.84Gb, Free 255Mb
This seems to be the maximum amount of space System can take up. Once it reaches this level, it remains static and does not increase any more. If I'm lucky, some of the random things I've been trying manage to actually clear it (or it appears so - may just be coincidence!), until the next time. When it starts piling on the pounds faster than a Weight Watcher at an all you can eat buffet (i.e. ME !)
I've owned SimsFreePlay for several months and my children, as well as myself, have been using it regularly. This week is the first time I've seen this issue, so I'm not sure if the game can be blamed!
Sometimes, I can do a restart by holding the power button and it clears out the excess System data, but not always (more often doesn't help than does). Once, I managed to clear out the excess by 'Resetting Sync Relationships' in BBLink (although that could just have been coincidental as it hasn't worked any time since!). I've tried 'rebooting' through holding down the higher and lower volume buttons simultaneously, as someone advised someone else on another forum when I Googled the issue.
I've tried browsing the folders and files via the USB connection to the PC to clear out any other rogue data that may be filling it up. I have no Android apps side-loaded since the first security wipe. Once, I actually did nothing (was just poised, about to do another reluctant wipe and restore of the OS, so was glad I saved myself the bother!) and it cleared itself out spontaneously!
Would dearly LOVE it if someone with more nous than myself can point me in a direction I haven't yet tried please The phone, once it reaches it's maximum bloat, becomes completely unusable - hub can't download even a single email or text, or even display ones I have stored there. Many of the apps can't even start and sometimes even Device Monitor is unable to load too so I can see what's going on!! I'm well and truly stuck for ideas now, so thank you for any suggestions you may have that might help

ArletteJ wrote:
Hi. I've had a Blackberry Z30, current OS 10.2.1.3062, since late April 2014. In the last couple of days I've had notifications about the "Device Storage Almost Full".
I've done a complete security wipe to try to resolve this issue (as advised on another forum). I've tried a Factory reset (as advised on another forum - a Google search reveals lots of fellow BB owners with an identical issue, but so far no actual explanations as to what's happening, or solutions that work for me!). I have NO documents, videos, music, or any other downloaded files saved on my phone, and minimal apps too. The largest app is The Sims FreePlay - 785.4, and total storage listed for apps is 1.84Gb
Each time, I reinstall fewer and fewer apps, yet over an hour or more, I can actually look at the Device Monitor periodically and watch the Storage being filled up with more and more 'System' files, whatever these may be! If I look at the Device Monitor, Memory, System, it shows that during the night, when I am in 'Bedside Mode' in the last two days it has downloaded 9.5Gb of data - this drops to almost nothing during the day when I'm actually USING the phone. However, this evening, I recorded the following stats, with no corresponding download of data over wi-fi during the same period, so I'm not sure if these two things are actually related!
The stats were:
18:28 - Just backed up the phone, not being actively used by me, Wi-fi switched off for test purposes, mobile network still connected
Storage showed at 18:28: System - 1.77Gb, Apps - 1.83Gb, User - 135Mb, Free - 9.45Gb
18:31 - Wi-fi turned on, played Sims FreePlay for 30 minutes
19:04 - Device Monitor checked
Storage showed at 19:04: System - 3.58Gb
19:04-19:24 - Switched to Bedside Mode for test purposes
Storage showed at 19:24: System - 8.63Gb
19:25-19:30 - Phone not being actively used
Storage showed at 19:30: System - 9.79Gb
19:31 - Received notification "Device storage almost full"
Storage showed: System - 10.12Gb
Currently at System 10.97Gb, User - 134Mb, Apps - 1.84Gb, Free 255Mb
This seems to be the maximum amount of space System can take up. Once it reaches this level, it remains static and does not increase any more. If I'm lucky, some of the random things I've been trying manage to actually clear it (or it appears so - may just be coincidence!), until the next time. When it starts piling on the pounds faster than a Weight Watcher at an all you can eat buffet (i.e. ME !)
I've owned SimsFreePlay for several months and my children, as well as myself, have been using it regularly. This week is the first time I've seen this issue, so I'm not sure if the game can be blamed!
Sometimes, I can do a restart by holding the power button and it clears out the excess System data, but not always (more often doesn't help than does). Once, I managed to clear out the excess by 'Resetting Sync Relationships' in BBLink (although that could just have been coincidental as it hasn't worked any time since!). I've tried 'rebooting' through holding down the higher and lower volume buttons simultaneously, as someone advised someone else on another forum when I Googled the issue.
I've tried browsing the folders and files via the USB connection to the PC to clear out any other rogue data that may be filling it up. I have no Android apps side-loaded since the first security wipe. Once, I actually did nothing (was just poised, about to do another reluctant wipe and restore of the OS, so was glad I saved myself the bother!) and it cleared itself out spontaneously!
Would dearly LOVE it if someone with more nous than myself can point me in a direction I haven't yet tried please The phone, once it reaches it's maximum bloat, becomes completely unusable - hub can't download even a single email or text, or even display ones I have stored there. Many of the apps can't even start and sometimes even Device Monitor is unable to load too so I can see what's going on!! I'm well and truly stuck for ideas now, so thank you for any suggestions you may have that might help
Hello and thanks for your detailed iinfo.
So...let me summarize this: during the day, under normal use (WiFi OFF and data service ON) the phone`s storage is staying the same. Then you switch WiFi ON and start playing the SIM game and according to your time line, in aprox 60 min, the phone runs out of storage....
Have you tryied to take a look at your "Device Monitor" > "Storage" before the phone becomes unusable, just to see what`s eating up your storage space?

Can't get correct resolution for second monitor

I am trying to use two monitors with a Vostro 1400 (Intel X3100 video card), the problem is I can't set the external monitor to 1280x1024. Gnome's screen resolution program only let me choose from 640x480 to 1360x768. Besides the resolution of the second monitor, everything else seems to be working fine. Some relevant info:
Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH x86_64
Current Operating System: Linux 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:13:30 UTC 2008 x86_64
Build Date: 17 December 2008 10:46:49PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 25 02:18:40 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Failsafe Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Intel GMA X3100"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(**) Extension "RENDER" is enabled
(**) Extension "DAMAGE" is enabled
(**) Extension "XFIXES" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x7b54e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfeb00000/1048576
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "exa"
(**) intel(0): Option "DRI" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xFEA00000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7616 kB
(II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Failsafe Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(**) intel(0): Option "NoDDC" "True"
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1280x800@60
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(**) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (336, 210) mm
(**) intel(0): DPI set to (193, 247)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x00000000
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status:
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x0001f5f6 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x0000fafb to 0x00014141
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfea00000
(II) intel(0): [drm] ring buffer = 0xe0000000
(II) intel(0): [drm] mapped front buffer at 0xe0100000, handle = 0xe0100000
(II) intel(0): [drm] mapped back buffer at 0xe5600000, handle = 0xe5600000
(II) intel(0): [drm] mapped depth buffer at 0xe6a00000, handle = 0xe6a00000
(II) intel(0): [drm] mapped classic textures at 0xe7e00000, handle = 0xe7e00000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 62914560 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x05600000 (pgoffset 22016)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x06a00000 (pgoffset 27136)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x07e00000 (pgoffset 32256)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB)
(II) intel(0): 0x00045000-0x00045fff: power context (4 kB)
(II) intel(0): 0x00100000-0x019fffff: front buffer (25600 kB) X tiled
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x01a00000-0x055fffff: exa offscreen (61440 kB)
(II) intel(0): 0x05600000-0x069fffff: back buffer (20480 kB) X tiled
(II) intel(0): 0x06a00000-0x07dfffff: depth buffer (20480 kB) Y tiled
(II) intel(0): 0x07e00000-0x09dfffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(EE) intel(0): underrun on pipe A!
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.99.2
(**) Option "Device" "/dev/input/event9"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(**) Option "SHMConfig" "True"
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "br"
(**) Video Bus: xkb_layout: "br"
(**) Option "xkb_variant" "abnt2"
(**) Video Bus: xkb_variant: "abnt2"
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event7"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) config/hal: Adding input device Microsoft Microsoft Trackball Optical?
(**) Microsoft Microsoft Trackball Optical?: always reports core events
(**) Microsoft Microsoft Trackball Optical?: Device: "/dev/input/event5"
(II) Microsoft Microsoft Trackball Optical?: Found 5 mouse buttons
(II) Microsoft Microsoft Trackball Optical?: Found x and y relative axes
(II) Microsoft Microsoft Trackball Optical?: Configuring as mouse
(**) Microsoft Microsoft Trackball Optical?: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Trackball Optical?: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Trackball Optical?" (type: MOUSE)
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event11"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "br"
(**) Video Bus: xkb_layout: "br"
(**) Option "xkb_variant" "abnt2"
(**) Video Bus: xkb_variant: "abnt2"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event10"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "br"
(**) Video Bus: xkb_layout: "br"
(**) Option "xkb_variant" "abnt2"
(**) Video Bus: xkb_variant: "abnt2"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "br"
(**) AT Translated Set 2 keyboard: xkb_layout: "br"
(**) Option "xkb_variant" "abnt2"
(**) AT Translated Set 2 keyboard: xkb_variant: "abnt2"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
AUDIT: Thu Dec 25 02:18:51 2008: 11649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=11673 )
AUDIT: Thu Dec 25 02:18:51 2008: 11649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=11674 )
AUDIT: Thu Dec 25 02:18:51 2008: 11649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=11675 )
(EE) intel(0): underrun on pipe B!
xorg.conf
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
Load "GLcore"
Load "glx"
Load "dri"
Load "int10"
Load "vbe"
EndSection
Section "Device"
Identifier "Intel GMA X3100"
Driver "intel"
BusID "PCI:0:2:0"
Option "DRI" "True"
Option "NoDDC" "True"
Option "AccelMethod" "exa"
Option "MigrationHeuristic" "greedy"
Option "ExaNoComposite" "false"
Screen 0
EndSection
Section "Monitor"
Identifier "Failsafe Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1280x800"
Horizsync 31.5-50.0
Vertrefresh 56.0 - 65.0
modeline "1280x800@60" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
DisplaySize 336 210 # 96 DPI @ 1280x800
Gamma 1.0
EndSection
#Section "Monitor"
# Identifier "Monitor externo"
# Vendorname "Samsung"
# Modelname "917p"
# Horizsync 31.5-50.0
# Vertrefresh 56.0 - 65.0
# modeline "1280x1024@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
# DisplaySize 339 271 # 96 DPI @ 1280x1024
# Gamma 1.0
#EndSection
Section "Screen"
Identifier "Default Screen"
Device "Failsafe Device"
Monitor "Failsafe Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1280x800@60"
#Modes "1280x1024@60"
Virtual 2560 2048
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
Option "DAMAGE" "Enable"
Option "XFIXES" "Enable"
EndSection

ichbinesderelch wrote:have you tried using xrandr? xrandr -q shows available outputs, xrandr --output outputadapter(like VGA) --mode 1280x1024, as far as i can see, virtual monitor is set high enough that this should kinda work!
Yes, I tried xrandr:
$ xrandr --newmode "1280x1024" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
$ xrandr --addmode VGA 1280x1024
$ xrandr --output VGA --mode 1280x1024
$ xrandr --output VGA --right-of LVDS
At first this didn't work at all, so I tried to mess with screen resolution applet and got output on the second monitor, but not at the desired resolution.
I tried running these commands again and got output on the second monitor, but at the wrong resolution. The strange part is that the resolution I want is listed by xrandr:
$ xrandr -q
Screen 0: minimum 320 x 200, current 2304 x 800, maximum 2560 x 2048
VGA connected 1024x768+1280+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800@60 60.0 +
1360x768 59.8
1024x768 60.0*
800x600 60.3 56.2
640x480 59.9
1280x1024 60.0
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800 60.0*+
1024x768 85.0 75.0 70.1 60.0
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1
TV disconnected (normal left inverted right x axis y axis)

HP Device Monitor

Similar Messages

Maybe you are looking for