HP DV7-6178US Battery Status is OK but not chrging

HP DV7-6178US Battery Status is OK but not chrging. I tried all possible solutions provided in other forums. But no Luck.
 Tried following stepss,
 1. remove battery shut down and un install Microsoft driver and start again.
2. Updated Bios Image.
But none of them works. Any better solutions. My battery status is charging and 2% but i remove AC adopter it's power down.

How long have you had the laptop? All signs point to a battery that needs replacement.

Similar Messages

  • HP Pavilion DV7 2206TX - DVD drive reads DVDs but not CD's

    My HP Pavilion DV7 2206TX - DVD drive reads DVDs but not CD's.
    When I insert a CD, the drive tries very hard to read the CD but gives up after about a minute.
    I get no error message.  I do not see the Auto play message.
    Windows Explorer does not recognize the DVD drive.
    When I insert a DVD, I get the Autoplay menu, Windows Explorer recognize the drive and the DVD. I can play the DVD using any number of Video players.
    I would welcome advice relating this problem.

    your HP Pavilion needs a new DVD driver. I ran into many problems such as this when troubleshooting computers in school.
    A DVD drive should play CD at any time:  While a CD driver will not play a DVD disc. Do not think there is a problem with sofware because it will only throw your troubleshooting skills  out the window and it will confuse you.

  • Updated to IOS 6.1.1 but battery still draining quickly but not ask quick than 6.1

    Updated to IOS 6.1.1 but battery still draining quickly but not ask quick than 6.1

    Do you have an Exchange/ActivSync email account?

  • Hp Pavilion g4, Product Number B6U80A, problem is Battery showed plugged in but not charging.

    Hi,
    I bought a hp pavilion g4 2036TU and Serial No is {Removed for privacy} and Product No is B6U80PA#ACJ from Cyborg world, Laminton Road, Mumbai, 400009 and invoice No is 302431 and that is hpauthorized showroom. From next couple of days i got a problem: "charger plugged in not charging". due to some busy work i not able to register complaint at that day but i register my complaint on 25-08-2012. They i...
    ssue a complaint no is HP Case ID #: 4681263011 but now current Case ID number is 4682402097 after i track lots effort they sent engineer Pradeep(9022181367) on site at 8-09-2012, and he didn't got any solution, and told me that he will order a battery as there are some problem in battery, but on next working day he called me and told that he sent a mail which contain a link to update BIOS and your problem surely resolved by that. But after using that link i updated BIOS but still problem and when i call to hpcustomer care they told me that your case is transferred to hp service centers, Vashi Navi Mubai. In between that I busy in my office work for some day and not get time to call again and again. And i got socked when I receive a mail from "{Personal Information Removed}" that your case is closed because your mobile is not reachable. But i all-ready contact to many time on
    customer care and also registered my response at Support Case
    Manager one day before their closing mail. After that on 15-09-2012 i again waist my full day on hp customer care to resolve my isuue ,
    but mostly they tell me your call connected in non-techinacal department, and you will get callback within 2 hour, but i don't get call back always.
    After done lots of call to many person, swati, rajani, pradeep, and to many customer agent they told that a engineer again visit to detect the problem, but i don't understand why they sent engineer again and again to only detect problem. And today another Engineer Mahesh Rahate(9702788581) visit and told that problem in motherboard and need to replace, These guy doing R & D on my system, they don't know what is problem. I attached receipt which given by their engineer. Their are not link between hp service center and hp customer care. Customer care agent told your case is referred to hp service center and they contact you, but don't tell any updated status.
    I have one major question why i ready to repair my mother board in newly system, I only want brand new System or refund my money. I have lost my hard earn money (approx 40000/-) in this process. So I only want either refund of money or newly brand system only, no any replacement.
    I have lost my whole month in that process and i also affected my work which affected by because of this system. It cost me more then 40000/- financially. So my one and last option to either refund my money or give brand new product, I don't want defected system replace again and again and my work suffer in future.
    And about my experience of Hp product, its wrost, in both term product wise and also in term of after sales services. How they pass testing of product and brought in market a defected product. And not provided proper service. So as per my experience I never suggest to purchase any hp product as per my worst experience of hp service after sales.
    Thanks!
    With Regards,
    Arvind Kumar Gangwar

    I saw your post and forwarded it to the right people a for their review. You should hear back from someone shortly.
    Be certain to watch for private messages.  
    This can be checked by usign the mail icon in the top-right corner next to your user name.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Battery showing 100% charge, but not running off battery

    I have an Hp Pavilion 10 Touchsmart that shows a 100% battery charge, but will not run off the battery when I unplug the AC adaptor.   I have tried calibrating the battery which went okay. I have tried uninstalling the microsoft driver for the battery and reinstalling it and it did not fix the problem.I have also checked the "Battery Report" using the cmd prompt. The battery report showed everything was charging good with the battery on the laptop for many days.I checked the "Energy Report" using the cmd prompt. The energy report had some warnings, but it was all relating to energy use.I have owned this little computer for less than a year and it should not be giving me this much trouble. At this point, I think I have done everything I can do on my end especially since I cannot remove the battery without disassembling the laptop.  I do not think it is a bad battery unless it is defective because the computer sees very little use and it is less than a year old so I am thinking a software problem. Any additional suggestions?

    It is my understanding Hp warranty is only 90 days which means it is not under warranty. I have owned the laptop for less than a year with it shipped by Hp on "Thur 9/18/2014 5:15 pm". I orginally thought it was not under warranty, but I just tried a Hp warranty status site and it said "2015-10-23" was the warranty expire date.

  • IDOC status on 03 but not recieved on target system

    Hi,
    We are recieving inbound idoc from external system and processing Inbound IDOC on SAP system, after processing inbound idoc on SAP we are sending status outbound idoc to external system.
    The above functionality was working fine before upgradation.
    after upgradation we have recreated RFC (TCP/IP) connection, updated at port level and also configured the new SAP system details ( sid, Hostname, service programsname...) on external system correctly.
    Now we are recieving inbound idoc from external system on upgraded system,after processing inbound idoc details on SAP system, generating outbound idoc from SAP and it reaching the outbound prot sucessfully on 03 status with green light.
    But external system is not recieving the IDOC. How to find why idoc is not reaching external system even though it is sucessfully passed at outbound port level with green light status 03.
    We have also checked the SM58 for TRFC entries but we didn't identified any entries on SM58. Please help us on this issue
    Thanks,
    Raju

    Hi Raju,
    As  mentioned by The specified item was not found., the one common problem for the IDocs not being sent might be a missing COMMIT WORK. I.e. when using the standard SAP API's for sending outbound IDocs, SAP actually creates the IDoc and registers an update function for sending the IDoc out. So without the COMMIT WORK, the IDoc usually exists on the database (implicit or database commmits), is in status 03, but hasn't been sent out and cannot be found in the outbound RFC queue (because SAP never tried to send it).
    If you're convinced that a COMMIT WORK is happening (and after trying to send the outbound IDoc) then I'd try the following: Replace the used RFC destination (or re-define it temporarily) with one that points to the same system from where you're sending. If you don't see the IDocs as inbound IDocs or in the outbound RFC queue, the sending never happens. (Ok, might be a moot point if you completely trust your external system, but usually it's good to even rule out the most unlikely causes - if it's simple.)
    So if this didn't help, maybe you can provide some further insight into how you're creating/sending the outbound IDocs. This could help us in trying to get some answer, but for a starter the COMMIT WORK mentioned by The specified item was not found. is in my opinion the best candidate.
    Cheers, harald
    p.s.: Even if you're using ALE, I don't think it could be due to anything in your distribution model as mentioned by The specified item was not found.. If you wouldn't have setup the distribution model, the SAP API's should create a master IDoc in memory and then no communication IDocs (since there's no recipients or due to filtering) and thus there should be no outbound IDocs on the database.

  • Battery charged to 100% but not working

    Have a G510 and it works fine when pluged into AC adaptor but won't run when not connected.
    The battery is reading at 100% charged but won't actually run the system.  Can anyone advise if it is the battery is dead or something wrong with the actual hardwear.
    I have 12 days on my warranty left so would like to know sooner rather than later.

    Hi Fazzie,                           
    Welcome to Lenovo Community!        
    As per the query we understood that you are facing issue with battery of your Lenovo G510 laptop.
    As you have mentioned that the system is not powering on only if the battery is connected to the system, please check the battery with another system to confirm the issue, try to connect other battery and check for the issue.
    Also try to reset the battery gauge, go to start search type power manager, under power manager select battery tab, under battery tab select battery maintance and select perform reset under the battery gauge reset option.
     Hope this helps! Do post us back for further queries.                                
    Best regards,                       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My battery gets really hot but not a recalled number

    my battery (serial A1045 HQ344) gets really hot - unbearable on my legs even through trousers. has anyone else had this problem. as it is not covered by the recall program is there a way of alerting apple to it? i have read the other posts on hot batteries.

    Welcome to Apple Discussions!
    Call AppleCare. In the UK there is this number:
    (44) 0870 876 0753
    Though according to this article, that amount of heat is not unheard of:
    http://docs.info.apple.com/article.html?artnum=30612
    If you see other symptoms or your hardware test:
    http://docs.info.apple.com/article.html?artnum=86287
    reveals something abnormal about your machine, definitely give AppleCare a call.
    Note your machine is under a 1 year hardware warranty when you buy it, and if you buy AppleCare before that one year is up, you can extend both hardware and software Apple coverage to 3 years from computer's purchase.
    Otherwise you are given a per incident fee, and repair costs for parts and labor out of the Applecare plan if something needs repair. For more on how AppleCare works, see this page:
    http://www.apple.com/uk/support/products/

  • HP Pavilion dv7 plugged in but not charging.

    I have aj HP Pavilion dv7 that's almost 2 and half years old. For some reason my battery won't charge even though I have the charger plugged in. Right now the battery is completely dead but before it died I tried everything to fix it. I tried updating the BIOS but this website said my laptop was up to date. I tried a hard reset, I tried turning it on with the charger in and battery out. Usually the light next to the charger port is illuminated but now it doesn't come on. I hovered over the battery icon and didn't even say it was plugged in. It just showed how much battery was left. Could the battery not be receiving charge or is it my charger that doesn't work?

    Huffer wrote:
    Does the charger run the machine with the battery out? If so, the charger is good. 2.5 years is about normal battery life so the odds are strong you just need a replacement battery now.
    Yes, the charger works with the battery out. My question is however: I just  bought a replacement battery, my problem is that my  battery is plugged in but not charging. I bought a non OEM Battery FY1. Is there help for this? Thanks
    DV7-102nr, Windows 7 64x SP1,  BIOS Version/Date F.2D, 11/29/2010, 
    1) HP Pavilion dv7-1025nr

  • Red battery showing but not charging and button not working

    My daughters iphone 3G is showing a red battery when plugged in but not charging, it always shows 20%.  Also the button isn't working, so I can't reboot.  I have plugged it into the PC and it doesn't recognise the device?? what is going on with this?

    same problem here, on the Black MacBook, purchased in April 2008.
    0% icon and the green lid.
    I tried restarting, reseting etc ... without any success.

  • Keyboard battery status in yosemite

    I keep loosing contact with my keyboard and it occurred to me the battery might be low. I went into System prefs to check the keyboard battery status and it is not there. It was in Mavericks. Am I missing something? How do you know your battery status?? And if anyone knows why I might be losing connection. I have  a new iMac 5k Retina (yay).

    Ok, I feel silly. I rebooted and the battery status is there. There is something weird happening and just as soon as I pinpoint it I can rely on me to let someone know. Meanwhile, I will continue to play with my new machine.

  • My ipod shuffle voice over button does not list the song/artist or give battery status.  I am following direions but it doesn't respond wether I push it once or twice.  Any ideas?

    ?The voice over button does not work per directions (press once for title/artist; press twice for battery status.  Any ideas how to make this work?

    I discovered that if I push the button quickly (twice), I get the battery status.  But I still do not have any title artist data.  The music get quieter but no info.

  • How to reset battery status in menu bar?

    After upgrading to 10.5.5 I experienced sudden loss of performance with both of my batteries.
    Overnight the battery yielded only 45 min, and the recharge time was usually about 40 min as well.
    As a result of frustration, I decided to crack open the case of 1 battery and connect a 12V 20W bulb to fully discharge the battery.
    Possibly as a result of the deep discharge, the battery took 6 hrs to recharge, and now yields approx 3-4 hrs of power.
    HERE IS THE PROBLEM. The battery status in the menu bar does not seem to reflect the battery's newly found performance.
    It keeps says "40 min." left, and when it runs out of minutes, it displays: "Calculating ... remaining"
    The same odd behaviour occurs when charging the battery. It says: "35 min" to full charge, and when it runs out of minutes it displays: "Battery finishing charging"
    MOREOVER, yesterday, the low level power indicator appeared, but the computer kept working for another 1.5 hrs before going to sleep.
    Finally the System profiler shows this information
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 1661
    Remaining Capacity (mAh): 1361
    Amperage (mA): -1203
    Voltage (mV): 11441
    Cycle Count: 71
    After the deep discharge, the Full Charge capacity jumped form 640 to 1661.
    That's good, isn't it?
    But how can I reset the battery status in the menu bar to reflect the actual performance of the
    battery? Or did the deep discharge damage something?
    Regards

    I talked to Apple repeatedly and they refused to replace the battery in spite of the many good arguments I brought forward. Their only argument is that the battery is old (was shipped in 2006)
    I even requested them to ask their own technicians whether
    it is normal for a battery with only 71 cycles to discharge so soon.
    My request was declined.

  • Storage 6180 - Both controller Battery status is Learning

    I have face the problem in 6180, battery not charging. So i have reset the controller. After reset the controller, controller battery is charged and alarm is cleared. But both controller battery status is showing learning. Kindly suggest.
    regards,
    Anwar

    user13590162 wrote:
    I have face the problem in 6180, battery not charging. So i have reset the controller. After reset the controller, controller battery is charged and alarm is cleared. But both controller battery status is showing learning. Kindly suggest.
    regards,
    AnwarA non authorative 'guess' is that the controller is attempting to learn the rate of discharge of the battery. It needs a little time (maybe quite a few hours, even a day) to do this.
    Batteries are a weak spot of things.
    Get prepared to replace the battery .... otherwise I suspect (and I know not the 6180 specifically and I am not bothered to look it up, you can as well as I), the appliance may degrade and run a little slower.

  • HP Battery status changed from "Weak" to "Replace"....

    Hi,
    I had purchased HP Laptop dv4-1211 TU in India in 2009. Now i stay in US. Recently few days back, i checked a option " HP Battery Check" in my laptop. When clicked it said my battery status is "Weak". I didn't bother much. But today when i checked it back it said " Replace". How do i go about this?
    My queries are:
    1. Is it safe to use my laptop in this condition?
    2. Battery gets heated up too much after this, so do i need to replace with a new one or can i plug in and use it, i.e i meant on AC power and not battery alone?
    Waiting for the response from u.... pls help me....

    Hi sweety2222!: most laptops that use batteries can also use AC as well
    but to be sure I'd check the manual the manual will also tell you if you can replace it, the type of battery & how to replace it as well
    good luck
    hope this helps you
                                                                                                                 spacechild

Maybe you are looking for