HP Laserjet 2820 - print spooler was unable to connect

Working in Microsoft 2003 and printer is on a wireless network. In over a year - never had a problem until 5 days ago an error message appeared when I attempted printing which stated... print spooler was unable to connect to your printer. This can be caused by your printer being turned off, the cable being unplugges, or being connected to a VPN, which will block your access to your local network.
Also, when I attempted accessing the Print Settings from HP Director, it would not open and gave an error message...An unknown error occurred. Make certain that the device's power cord is plugged in, the power is turned on, and that all cables are properly connected. Check the Troubleshooting tab or product documentation for more information.
Next, I thought I would delete the software and re-install. However - I no longer have the installation disk for the printer.I then tried changing the printer port to a standard port. That did not work.
Help would be greatly appreciated.
Thank you.

hi everyone
i have same problem on hp clj2820, half page printed, half page
1) i cleaned laser mirrors and verify conectors and wires of laser scanner unit ... the problem persist
2) i inspected carousel assembly, a small plastic gear on the upper left side was wrong aligned, 1 tooth scrolled up or down, i fit this tooth in correct position ... the problem persist
what is happening?, regards

Similar Messages

The search request was unable to connect to the Search Service

I have upgraded from WSS 3.0 to SharePoint Foundation 2010. So far everything appears to be OK apart from my search.
When I attempt a search I get the following:
The search request was unable to connect to the Search Service.
I checked the Manage Database Update Status in Central Admin and noticed the following(an upgrade is required):
Also, I checked Manage Services on Server and noticed that the only search related service is 'SharePoint Foundation Help Search'.
If I go into Manage Service Applications and click new there is no option to add a search service.
Finally I tried PSConfig:
PS C:\Users\administrator.ACHESON> PSConfig.exe -cmd upgrade -inplace b2b -force
-cmd applicationcontent -install -cmd installfeatures
SharePoint Products Configuration Wizard version 14.0.6009.1000. Copyright (C) M
icrosoft Corporation 2010. All rights reserved.
Performing configuration task 1 of 6
Initializing SharePoint Products upgrade...
Waiting to get a lock to upgrade the farm.
Successfully initialized SharePoint Products upgrade.
Performing configuration task 2 of 6
Initiating the upgrade sequence...
Successfully initiated the upgrade sequence.
Performing configuration task 3 of 6
Registering SharePoint features...
Feature installation has determined that there are no new features that require
installation.
Successfully registered SharePoint features.
Performing configuration task 4 of 6
Installing the application content files...
Installing the SharePoint Central Administration Web Application content files..
Installing the SharePoint Web Application content files...
Successfully installed the application content files.
Performing configuration task 5 of 6
Upgrading SharePoint Products...
10.00%Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfig
urationTaskException was thrown. Additional exception information: The upgrade
command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Total number of configuration settings run: 5
Total number of successful configuration settings: 4
Total number of unsuccessful configuration settings: 1
Successfully stopped the configuration of SharePoint Products.
Configuration of SharePoint Products failed. Configuration must be performed be
fore you use SharePoint Products. For further details, see the diagnostic log l
ocated at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\1
4\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log and the application
event log.
This is the warnings and errors that the log contained:
10/09/2013 12:48:16 10 WRN Found registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ComponentsToRegister, but the SubKeyCount is zero
10/09/2013 12:48:24 10 WRN Failed to add the service connection point for this farm
10/09/2013 12:48:24 10 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=acheson-glover,DC=com doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
10/09/2013 12:48:40 10 ERR The exclusive inplace upgrader timer job failed.
10/09/2013 12:48:40 10 ERR Task upgrade has failed with a PostSetupConfigurationTaskException An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
10/09/2013 12:48:40 10 ERR An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:40 10 ERR Task upgrade has failed
10/09/2013 12:48:40 1 ERR Task upgrade SharePoint Products failed, so stopping execution of the engine
10/09/2013 12:48:40 1 ERR Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed or some tasks were not run
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed to execute
10/09/2013 12:48:41 1 ERR Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log, fix the problem, and run this configuration wizard again.
10/09/2013 12:48:41 1 ERR Post setup configuration was not run successfully when using the command line task driver module
How do I resolve this?
Cheers
Paul

Hi,
SharePoint Foundation the search service should be installed by default. It's not the same as with 2010 Standard or Enterprise where you can create a "Service Application" for it.
Follow this article to configure SharePoint Foundation Search:
http://plexhosted.blogspot.com/2011/11/how-to-configure-sharepoint-foundation.html
Meanwhile, here is a thread which discusses the similar question:
Configuration of SharePoint Foundation 2010 Search
http://social.technet.microsoft.com/Forums/sharepoint/en-US/af57728f-ae20-477b-8c67-2b594a1a72de/configuration-of-sharepoint-foundation-2010-search?forum=sharepointadminprevious
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

EA3500 - Windows was unable to connect... (Win 7 and Win 8.1 have done this off and on)...

I recently purchased a Linksys EA3500 router and am using it as the sole router in my home network. I have primarily had three devices connected to the network computers/tablets - two running Win7 and one running Win8.1.
The first few days were OK but then the Win 8.1 system would not connect to the network (see the error message below). "Windows was unable to connect..." I tried the problem troubleshooter, power cyclilng the comptuer, power cycling the router. Updating the router firmware to the latest (it added a .1 at the end). Uninstalling and reinstalling wireless drivers on the computer. I've reset the router to factory defaults. I've run the router with and without wifi passwords.
This morning I was able to connect the Win 8.1 system to the network. Not sure what changed overnight. However, today I have had two instances of a different computer, one of the Win 7 systems, suffering the same problem. Different hardware. The Win 8.1 system is an Asus T100 tablet/netbook using a Broadcom 802.11abgn Wireless SDIO Adapter. The Win 7 system is a Dell E6540 laptop using a Dell Wireless 1506 802.11b/g/n 2.4 GHz adapter manufactured by Atheros Communications, Inc.
Last night, when I was having problems with the Win 8.1 system, I should note that it worked fine with the 5 GHz network. The laptop, however, does not support 5 GHz and now that it's suffering the same problem my only work-around is a cellular hotspot.
I'm suspecting the router at this point. Has anyone else seen this? Any ideas what could be causing it, what I could do to fix it or what I might do to help diagnose the problem(s) ? I'm more than willing to run third-party software to analyze and better understand what is happening on a network level (I would actually like to understand as much as anyone is willing to get me started on).
If I am unable to determine why certain systems almost seem to become "banned" from my network while others are working just fine then I'm going to have to return this device and try something else.
Thanks,
Dave
I recen

Hi @daved31,
You are on the right track. Checking the Wireless MAC Filter is one of the troubleshooting steps. For 2.4 GHz frequency, the suggested channels are 1, 3, 6, 9 and 11. For the 5 GHz, I suggest to use the highest channel. Those channels will give you a better signal, just make sure that no other wireless device is using it to avoid wireless interference.
If only one wireless device is not connecting wirelessly, we should focus on the wireless device itself because we know that the router/access point is working since the other wireless devices are working wirelessly.
I suggest to delete preferred networks on the laptop. Here's the link that may help: http://kb.linksys.com/Linksys/GetArticle.aspx?docid=85537a14b0214be48217c733bba9ac65_Removing_Wirele...

The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
online & server 2008 on my LAN , now I have changed the server for Online)
Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
error code is as follows -
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
System.Net.WebException -- The operation has timed out
Source
System.Web.Services
Stack Trace:
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

Hi Sagar,
First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
Please try to run iisreset on the WSUS server, then try to reconnect.
Also, please try to run the server cleanup wizard to remove the unused update.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Reload Software:552 and then "Application loader was unable to connect with your device."

Hi guys
I'm new to this forum and looking for a help please..
My curve 8900 got the "Reload Software:552" message on the screen. I was trying to uninstall an application and after it asked me to reboot, it showed me that message. I already try to reinstall the OS like most of you guys said. But when I already in the process of that, it showed me "Application loader was unable to connect with your device. Please re-connect yout device, enter password, if requiered, and retry"
I was trying this steps..
1. use the BlackBerry Desktop Manager
2. connect the BlackBerry to the computer using a USB cable
3. click application loader, then start
4. then i choose the OS and apps i want to install it also
5. after i click finish and the process start, i stuck on the task 2 of 5 "wait for device initialization" and then the message "Application loader was unable to connect with your device. Please re-connect yout device, enter password, if requiered, and retry" showed.
I try and try again but there is no use. it keeps show that message.
help me please, this really frustrates me
Thanks in advance guys..

1. Make certain your USB cable is connected to a main REAR USB port on the rear of the PC, not a front USB port, not a USB hub.
2. Try loading the OS with these instructions (make sure that Desktop Manager is not running):
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Iphoto was unable to connect to iCloud photos on my mac. What should i do?

iPhoto was unable to connect to iCloud photos on my Mac. How do I solve this?

absolutely no idea sicne you provide no information
Best guess is to upgrade to iPhoto '11
Maybe if you provided some information including versions of iPhhoto and of the OS, details of exactly what you are doing, details of whathappens that keeps you from connection
LN

Error enabling photo stream "iphoto was unable to connect to Photo Stream"

Whenever I try to enable Photo Stream, it times out after awhile, and I get the following error: "iPhoto was unable to connect to Photo Stream." (see below [1]). I "tcpdump" shows that the computer is trying to open connections to akamai (unrelated?) but not apple. I am using iPhoto 9.2 build 626.
There is one oddity in this scenario : I have one iCloud account that I am trying to use between three computers. I was able to register iPhoto on my mac book pro, but it is failing on my second.
thanks in advance,
-tom
08:26:35.984082 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:37.417858 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
08:26:38.032082 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:39.977873 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:42.025748 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:42.435600 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
08:26:43.971461 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:46.019515 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:47.453197 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
08:26:47.965198 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:49.606268 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 339
08:26:49.708805 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 348
08:26:49.811498 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 379
08:26:49.914098 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 405
08:26:50.016310 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 401
08:26:50.017171 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:50.118847 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 401
08:26:50.221214 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 393
08:26:51.958833 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:52.368490 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
08:26:54.006909 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:55.004001 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [.], seq 187854:189302, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 1448
08:26:55.004213 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [.], seq 189302:190750, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 1448
08:26:55.004264 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [P.], seq 190750:191283, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 533
08:26:55.004415 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [P.], seq 191283:191688, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 405
08:26:55.035678 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 189302, win 4116, options [nop,nop,TS val 2280641050 ecr 1073825952], length 0
08:26:55.053470 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 190750, win 4116, options [nop,nop,TS val 2280641068 ecr 1073825952], length 0
08:26:55.060158 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 191283, win 4116, options [nop,nop,TS val 2280641074 ecr 1073825952], length 0
08:26:55.066460 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 191688, win 4116, options [nop,nop,TS val 2280641081 ecr 1073825952], length 0
08:26:55.209380 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [P.], seq 103254:103691, ack 191688, win 4116, options [nop,nop,TS val 2280641223 ecr 1073825952], length 437
08:26:55.209522 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [.], ack 103691, win 65535, options [nop,nop,TS val 1073826154 ecr 2280641223], length 0
08:26:55.952463 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:57.386190 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46

Good catch, nifmus. I'm kicking myself for not checking system.log earlier! I have very similar messages in mine.
By any chance is your Library folder (or part of it) relocated to a separate disk? Or your entire home folder? I have part of my Library folder on a SSD for speed, but my home folder and some of the larger Library subdirectories are on a regular disk because they wouldn't fit on the small SSD. It's all tied together with symbolic links, and without problems... until Photo Stream came along and didn't like it.
I knew that sandboxd was involved somehow, but your post prompted me to focus on it. It's definitely the problem here. I found the following sandbox profile file inside the iPhoto application bundle:
/Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app/Conten ts/Resources/PhotoStreamAgent.sb
Inside this file are a bunch of definitions to control what PhotoStreamAgent is allowed to do. There are a bunch of lines under an allow-file-write* declaration which should allow PhotoStreamAgent to write to the above files listed in your log. Lines such as:
(home-regex #"/Library/Application Support/iLifeAssetManagement")
(home-regex #"/Library/Preferences/com\.apple\.iLifeAssetManagement\.crash\.plist(\.[^/]+)? $")
And many others. In my case, I suspect that the problem may be related to the fact that the final absolute path of those files may differ from what you'd get if you just substituted my home directory in for "home-regex" since I have stuff relocated around. Although since I was able to get it working with a blank home directory, also put in place via a symbolic link (so the final path differs), I'm not 100% sure of this.
What I do know right now is that there is a quick "hack" that fixed it for me. I don't like the hack and would strongly recommend against it, because it's likely to break the next time there's a software update for iPhoto. But it works until I can find a permanent solution.
To make it work, I edited the above file and changed the second line from "(deny default)" to "(allow default)". This, of course, defeats the whole purpose of the sandbox by allowing PhotoStreamAgent to do anything it wants, but it also allows stuff that is really supposed to be allowed but fails anyway for us.
If you want to try this, it helps to be familiar with the unix underpinnings of OS X. There's probably a way to do it in the normal graphical user interface, but as a longtime unix guy, I just jumped to the command line and did a "sudo vi (that long filename)". To do it via the gui method, you'll have to navigate to that folder in Finder (quickest way is to hit Cmd-Shift-G and copy/paste the path, or right-click iPhoto and "Show Package Contents", then drill down to the file), edit the file, save a copy (because you don't have permission to modify it), then copy the new version over the old (it will ask for an admin password).
Again, I don't recommend this because it's likely to break in the future and defeats the security that Apple intended with the sandbox, but it's a quick fix. I'll continue to investigate as I have time, trying to find out precisely what's causing the failure with the default sandbox profile.

Aperture was unable to connect to Photo Stream

Aperture was unable to connect to Photo Stream. Help!

That didn't work for me. However I found an alternate fix. You just need to move ~/Library/Application Support/iLifeAssetManagement to the trash and then reboot, and it should work.

Prem c310 Prints Wirelessly But Unable to Connect to Applications on Printer

We are unable to use any of the Applications that show on the viewer. We receive error message"There was a problem connecting to the Internet. Please try again". I am on Macbook Pro with no issues printing wirelessly. All settings say the printer is connected to the network. Thank you

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

IPhoto was unable to connect to photo stream

When I try to enable Photo Stream I get the error message that is the title of this post. How do I fix this?

Hi LN,
It's iPhoto 9.2.1
In iCloud System Preference I selected the Photo Stream button but when I go to iPhoto to enable it there it fails with the message "unable to connect to Photo Stream" and when I go back to iCloud System Preference I find that the button has been UNselected.
Yes, it was working happily on all my devices. The problem cropped up after I did a reset on my iPhone. I don't know what that has to do with it, though, because both it and my iPad are happily connected to Photo Stream and pics I take with my phone show up on my iPad.
Thanks!

When I open fire fox and try to go into another web site, it tells me that it was unable to connect. I have internet connection and can get into safari because I have a macbook but also need to use firefox. Please help.

I have a macbook laptop. When I go to open firefox it opens but when I try to get into a website such as www.yahoo or any other, a menu pops up and says it is unable to connect to the server check your internet connection or if u have fire wall check to see if it is set for firefox to connect. I have never had this problem before. All of a sudden it does not want to work and I need firefox to work.

Hey, Buzz.
You can download the latest version of iTunes supported on Leopard here:
http://support.apple.com/kb/DL1575
I hope that helps.

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

HT4314 I was unable to connect to Game Center and changed my password, but I still can't connect to the server. Any suggestions?

Please, someone help me. I couldn't play any games on my ipad 2 anymore because I couldn't connect to the server. I reset my password but the Cannot Connect To Game Center server continues to appear. Can anyone give me a solution? I'm a Scrabble Junkie and is in serious pain right now!

on my iphone 3gs, i had the same error. i finally found help that worked on the internet. “Go to Settings > General > Date and Time > Set Automatically > On. My setting was set to 'OFF' (no idea how). I changed it and now i can log into game center, the app store and itunes once again.

IPhoto was unable to connect to iCloud Photos

I have iPhoto 7.5.1 on Mavericks 10.9.2 on an iMac. To try to fix another iPhoto issue (Home Sharing not showing iPhoto albums - a Fetching... permissions issue I thought), I created another admin, logged in as the new admin deleted my admin, saved the folder, and restored my admin user.
Everything was fine, but now I cannot set up any photo streams or shared photo streams in iPhoto. I go to System Settings and enable Photos for my iCloud/Apple ID account and it does a "setup" and the Photos box is checked.
But when I'm in iPhoto -> Preferences -> iCloud and try to set up iCloud sharing, it starts enabling and then stops with this. When it does this, it also unchecks the Photos item in System Settings.
And the same process when I want to share a photo in iCloud, go through the setup again in a separate window with a Use iCloud button, but clicking the button shows the Enabling iCloud Photos... dialog like above but NO error message and no iCloud area appearing under SHARED and the setup window just stays there. And I can repeate that over and over and no error message but no iCloud (although it UNCHECKS the Photos item in System Settings like above)! And then I clicked No Thanks, and all my existing shared streams disappeared.
What can I do to enable iCloud in iPhoto?

A iMac restart fixed this issue (but still cannot view iPhoto photos or albums on Apple TV - Home Sharing Photos Suddenly Not Working)

I downloaded the corresponding Apple app, version 1.0.3627. I carefully followed the sync instructions several times and was unable to connect. 4 emails with no response. Help

I received a cookoo watch as a gift. After downloading the Apple App, version 1.0.3627, I carefully followed the instructions repeatedly to connect to my iphone 5 only to fail to get a connections. I tried rebooting, turning of and on bluetooth and wifi with the same results. I have connected to the help link in the app and after four emails over the past week, have not had a response. Any suggestions? I almost feel like someone gave me an expensive bird house that happened to contain a cheap watch.

Definitely seems to me this is a problem with the App Developer. Hope they can get your cuckoo working.

HP Laserjet 2820 - print spooler was unable to connect

Similar Messages

Maybe you are looking for