HP Officejet 8500 909 AG

Is my Officejet 8500 909A capable of ePrint? If so, how do I get the email address of the printe? I have an Android tablet running Outlook and there is no print capability for emails. I was advised to forward it to ePrint.
Thanks,

Hi SM1251,
Welcome to the HP Support forums.  I understand that you would like to print from your Android tablet to your Officejet 8500 A909g.
Your printer does not have the ePrint feature but you still can print from your Android device to the printer. I have included a document on how to do that.  I have also included a document with the FAQs for the HP ePrint mobile app. For additional reference I have also included a document about printing using Android 4.4 KitKat if that is the Android version your tablet is running.
Printing from Your Android Device with Non-Web-Enabled Printers (No HP ePrint Support)
HP ePrint Mobile App FAQs
Android 4.4 (KitKat) and Later: How to Use the Android Printing Solution
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

  • OfficeJet Pro 8500 909

    How do I perform a full reset of HP OfficeJet Pro 8500 909a

    Hi azgene
    I understand you would like to know how to run a full reset on the Officejet 8500 909a.
    Here is a url for partial reset.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01631212&tmp_task=useCategory&cc=us&dlc=en&lang...
    If you want to private message me I can provide you with the full reset.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Installation big problem with Officejet 8500

    My problem is the following:
    I have a LAN on which are connected 2 PC's with XP, 1 PC with Vista and one with Windows 2000. I want to install a printer on the router using TCP/IP and cable.
    The installation of the Officejet 8500 was without problem on the XT machines.
    It went well on the Vista machine. Then it lost the printer. I had to go back to the pre-installation stage and do it again. Now it seems OK.
    The problem is on Windows 2000. The installation process goes up to the point where the printer is found and the IP address and printer ID correct.
    Then the sofware tries to configure the printer and it fails (the printer configuration has failed). I have tried again a lot of time without success.
    The only way out is to proceed with installation and try to establish the connection to the printer later. I tried it also, without success.
    The contacted HP support seems to be lost with the problem.
    Can somebody help me?
    Many thanks,

    When you say that after half an hour it told you that you "could not" do you mean that the install process never began (no "installing..." progress bar) or that it did start but subsequently quit, reporting failure?
    If the first, try booting from your G4's Tiger install disk & running its copy of Disk Utility -- don't do an install but instead choose that application from the "Utilities" menu of the installer application. Perform both the disk repair (first) & then permissions repair. Quit Disk Utility, choose the Startup Disk utility (from the same menu), select your G4's drive & restart.
    If the second, your Tiger OS has been compromised with some (but not all) the Leopard components, which is why startup hangs. For this, start off as above but just run the disk repair from the Tiger installer disk, then perform an Archive & Install from its installer. This should restore the Tiger OS to a functional state, but you will have to reapply any OS 10.4 updates released after the release date of the Tiger installer disk. A good way to save time with that is by downloading the latest combo updater (10.4.11) & applying it.
    In either case, it is a good idea to backup your home folder(s) from your G4 to prevent data loss should anything go wrong. Target disk mode, as already described, is a good way to access the G4's contents even if you can't boot it into an OS.

  • Printer Control iPad app can't find OfficeJet 8500 909g even though HP ePrint can

    The HP Printer Control app for iPad can't find the HP OfficeJet 8500 909g. The printer is properly connected to the wireless network and was found easily by the HP ePrint iPad app (and by my computer's utility and scan apps). But when that ePrint app suggested I use the Printer Control to do mobile scanning, the  PC app still couldn't find the printer.

    Hi,
    This is an expected behavior as only ePrint enabled devices are supported by the HP PRinter Control app, the specific model is not supported as you may listed below within the full chart of any supported products for the different mobile apps:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&lc=en&cc=us&dlc=en&product=3752459#N26...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • OfficeJet 8500 Pro A910 display freezed on "Printing in progress"

    Hi,
    I've a problem with my OfficeJet 8500 Pro A910. When I send a file to print the print queue on PC shows "Print error" and on the printer display appears "Printing in progress" but nothing is printed. At this point I must switch off the printer, wait some seconds, switch on the printer and send again the file to the printer, so the file is finally printed.
    The printer is plugged by wired network and I've the same error on Windows 8 and Windows 7 PC. Why?

    Hello and thank you for your update.
    In my honest opinion and from my experience working in this field, it could be anything at this point. Your printer may be having an issue where the screen is freezing when you send a command to the printer. 
    You want to try everything before you determine it's your printer that is at fault.
    Make sure you have this printer plugged into a direct wall, not a surge protector?
    Have you tried to uninstall and reinstall your software? (To make sure that's not a possible cause)
    How long have you been experiencing this issue for?
    Also, try a hard reset. Click here to perform this step.
    Let me know your troubleshooting steps and I will continue to assist you further.
    I worked on behalf of HP.

  • Why is my computer telling me to turn ON my HP officejet 8500 all in one? It's ON!

    My HP officejet 8500 all in one printer is powered on. The fax and copier are working but when I try to print my computer (windows 7 pro 32bit) tells me to power on my printer. I had trouble with my DSL internet server yesterday and installed a new modem w/ router from at&t and my printer runs through a netgear prosafe port switch. I had to reboot everything to get the internet up on my PC. the printer worked fine before the internet and hardware trouble. I have tried wiring it directly to the PC with the USB cable and it gives the same error. I have rebooedt, unplugged computer and printer over and over.

    Turn the printer off.  Hold # and 6 keys while and a bit after turning it back on.  This will reset the printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Why is my Officejet 8500 909a not recognized by eprint?

    Trying to use eprint on ipad, but it doesn't find my networked Officejet 8500 909a printer. This printer IS on the approved list, why isn't it being recognized?

    Hi videoguy741,
    Which method of using ePrint on your iPad for your Officejet 8500 are you trying to use:
    Trying to print from the HP ePrint Service app?
    Trying to print from the HP ePrint Home and Biz app?
    Trying to email the printer using the ePrint service?
    Clarifying will help specify the solution. However, the first option is not the most efficient and the third option is not possible on this particular printer. The second option, the HP ePrint Home and Biz app, would be the best option to print to your Officejet 8500 A909a printer from your iPad, over your local wireless network.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Officejet 8500 Flashing Firmware

    I have just updated the firmware using a direct USB connection, I could not get it to work via a wired network. The printed test page shows the firmware to still be the old DLM1FN1006BR version, even though the install completed. Any thoughts anyone? The self test page shows the correct printer at the top Offiecjet pro 8500 A909g Series, Win 7 shows a 2nd printer now in the control panel,, HP734BEC ( HP Officejet Pro 8500 A909g ). 
    I am dong this because the Show HP Solution Center icon does not open the center, I get an error that the software installation did not complete. The printer is and has always worked fine, but if I do not close that Solution Center icon on the taskbar, in Win 7 64 bit, it crashes windows. This is the only problem I have with this machine.
    Thanks for any help.
    Albie

    Hello Wawa,
    Welcome to the HP Forums!
    I understand you're receiving a couple of issues with the Officejet 8500 A909G. I will do my best to assist you! If the firmware said it was successful, then the firmware version should of changed. You can try resetting the printer for more than 60 seconds. Leave the printer turned on> Disconnect the power cord from the back of the printer. Try printing another test page to verify if this made a difference.
    Since you're receiving a message from Solution Center stating the software installation is not complete, then follow this thread from @SuperMario1 on: "HP solution center cannot run because your device installation is not complete".
    Please post your results, as I will be looking forward to hearing from you. Have a great day!
    I worked on behalf of HP.

  • Problem HP Officejet 8500 with Mavericks

    Hello,
    Since the last update for the printer HP officejet 8500 a909a, all the documents are printed in black and white and never in colors ...
    Thanks for your help.

    Apple makes updates for the printers ...
    Cfr. : Gestionnaires d'imprimantes HP v3.0 pour OS X

  • Clearing inaccessible paper jam on OfficeJet 8500

    After printing no more than 20 pages on my new OfficeJet 8500 Wifi printer, the paper jammed. I have tried to clear the jam but have not yet succeeded.
    Here are details of my problem:
    My printed page almost finished feeding out from the printer, but the very end of it is stuck between the rollers. This means that - after removing the ADF - I cannot reach the paper at the back of the printer to pull it out backwards. Since the advice is NOT to pull it forwards, what do I do?
    No error message displayed. This worried me!
    Any advice please?
    Unfortunately the help page I consulted from HP does not explain how to clear the jam I have. (See "HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g) All-in-One Printers - 'Paper Jam' Message Displays on the All-in-One" http://h200003.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01617494&lang=fr&cc=fr&task...

    Is it possible to reach inside with long nose pliers or something like that to pull it out from the back? Maybe work it out sideways? Or can you print something that would go through and hopefully dislodge that piece of paper?
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • HP OfficeJet 8500 Pro A909n error says printhead has problem, can't access tests or fixes

    The printer was not printing but a few streaks of magenta. I ran the tests and the test printing and did the functions to allign printheads, clean printheads, and calibrate linefeed but still could not get magenta to print. I read much advise on the forum and followed it: after making sure the ink cartridges were not empty, I first cleaned the contacts on the 2 printheads and replaced them. After a partial reset, the printer could not get proper allignment. After using the HP Print & Scan Doctor to do the tests and the services again (including 3 trials at allignment), the printer could still not get allignment. While I was getting this error message, I could press OK and bypass the message to allow printing and other functions.
    Then I started getting an error message that there was a problem with the Black/Yellow printhead. This error message could not be bypassed and I could not access Setup, it would not respond to anything I tried to do from the HP Print & Scan Dr, or the Solution Center, or the embedded web server--I could also not bypass the error message to access the printer from the LCD touchplate. Then it switched error message to say that there was a problem with the Magenta/Cyan printhead. Trying to do tests or services from the Solution Center, I get the screen where it shows that there's adequate ink in all the cartridges, but then when trying to access any of the Services, I get the error message on my computer that there were no ink cartridges detected! Because of this wrong conclusion by the Solution Center, it won't run any of the Services.
    I don't believe any of the 2 printheads need to be replaced. I think that whatever it takes to allign the printheads is not working right. Because I could not get past the printhead problem error message, I tried a full reset by plugging in the printer while holding down the 3 and the # symbol on the keypad. Then I was prompted to choose a language and location, but it went right back as I confirmed the location as the USA to the printhead error message and I'm back to square one, unable to do anything or to print anything. I could replace both printheads, but I'm afraid the printer will still not be able to do a proper allignment and still will not print with the same error message or something new. Is there any help for this printer?

    Welcome to the forums @uvbogden !
    I read through your post about the problems you have been having with your Officejet 8500 A909a model. To be honest with you, you seem to have tried just about all of the steps I could have possibly suggested to you, in order to get through the alignment problem. Usually when this happens, the printhead(s) have failed, and need to be replaced, or the printer itself could have an internal malfunction and a new unit entirely might be needed. I have found some troubleshooting guides for you to check out below, perhaps browse through them and try any steps that you may not have tried to see if they can help.
    HP Officejet Pro 8500 All-in-One Printer Series (A909) - An 'Alignment failed' Error Message Display...
    HP Officejet Pro 8500 All-in-One (A909) and Officejet Pro 8500A e-All-in-One (A910) Printer Series -...
    'The Following Printhead Appears to be Missing or Damaged' or 'The Following Printhead has a Problem...
    HP Printers - 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a '...
    If the issue continues, please consider calling us directly to discuss your printer/parts replacement options or trade ins.
    Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    I wish you good luck and hope you enjoy your Wednesday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Officejet 8500 skips lines when printing MS files

    Has anyone ever encountered this?
    My HP Officejet 8500 pro prints 3 lines then skips 3 lines repeatedly when printing MS documents but will print all my pdf
    files flawlessly.  Did I mentioned it is connecected to a network and reacts the same for all users.    

    Hello -
    Sounds more like a "Print Quality" issue. I send you a link with some steps you can try.
    If the quality is fine, there is a "calibrate linefeed" in the tools section on the printer. press the wrench, then tools, then calibrate linefeed.
    8500A (910A)
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02208875&cc=us&dlc=en&lc=en&product=4083971&tmp...
    8500 (909A)
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01624436&cc=us&dlc=en&lc=en&product=3752462&tmp...
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    Donald

  • Officejet 8500 Plus A910, in OS 10.6, won't keep duplex accessory recognized.

    I have the duplex printing accessory installed on my new Officejet 8500 Plus A910. I am using an iMac with OS 10.6. When I first set up the printer, I am pretty sure it recognized the duplexer. However, now it does not automatically recognize the duplexer. EACH TIME I want to print on both sides of the paper, I have to go into System Preferences first and click on the check box that the duplex accessory is installed. Then the printing program will indicate that two-sided printing is ON. Otherwise, the two-sided printing option (under "layout" in the print dialog box says "OFF" and is grayed-out. How do I get the printer/software to keep the duplex accessory recognized?

    Thanks for response on the Epson duplex mode problem. I downloaded the updater, but it would NOT open after I installed it. The install created a second file called InkJet Printer 2 (original was w/o the 2). The updater tool is v 8.33 on the one just downloaded while the existing one was v 6.66, so definitely a later version. The v 6.66 gave message "unexpected quit", so it would not open either. Got same results on iMAC and MAC PRO. Do I delete the original InkJet printer file before installing the new download? Was afraid to as afraid driver would not work at all. What am I doing wrong???
    When select duplex mode in the print window get message "duplexer not installed" on both computers.

  • Can you e print with a officejet 8500 a909 using window OS

    Can you eprint  on a officejet 8500 a909 using windows 8 os

    No,
    The Officejet Pro 8500 (A909) does not support the ePrint feature regardless the operating system version. you may find the product capabilities listed below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&cc=sg&dlc=en&lc=en&product=5070121&tmp...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Officejet 8500 no showing all images on SD card

    i am using an officejet 8500. it is not showing all the images which are present on my sd card. all the images were taken with a digital camera. some of them show up using my laptop which is networked into the printer. it is fine if i plug the sd card into a different netbook to view the images.

    Nevermind, I just spoke with my wife who imported the pictures last night just from that event. She did not delete them after importing either. I guess next time this happens I will uncheck the box that says "Do not import duplicates" to troubleshoot.

Maybe you are looking for