HP Pavillion stuck in startup repair

Hi. I have a HP Pavillion g6 1d21ca. I think it was running windows 7. I started having problems with a blue screen that popped up a couple of times during start up, however the computer always continued to boot. I think the blue screen said there were errors, if this is the first time continue to boot. Then yesterday, the computer failed to boot. I got a black screen that said boot windows normally or launch start up repair. I tried booting windows normally however it was stuck on a grey screen. Then I tried launching start up repair which ran for a whole day and didn't seem to ever finish. I tried this a couple of times, same results. As I was writing this, I turned the laptop upside down to look at the bottom and now it won't even power up. My daughter received this as a Christmas gift last year and it was hardly used. I was using it to write papers for university and I need info off of it. I'm hoping someone can help.
This question was solved.
View Solution.

hi , i have the same problem with my compaq cq56 . one thing recomended was hard restart . it did not work for me but you can try it as you are not playing with any file's . all you need to do is unplug the mains lead , then take off battery, then hold down power button for 15 seconds , then plug the mains lead back in but not the battery , and try a restart . this was off the hp website. so give it a try . 

Similar Messages

  • Satellite L655 Stuck in Startup Repair mode

    My laptop is stuck in Startup Repair mode. A blue bar has been crossing the screen for over 24-hours with a dialogue that says, "Repairing disk errors. This might take over an hour to complete." If I try to cancel, I get a pop-up message that says, "The current repair operation cannot be cancelled."  Shutting down using the buttom and restarting takes me back to the same screen. Shutting down, and using F-8 takes me to the same screen. Does anyone have a suggestion as to how to escapte from this "loop"?

    Which Satellite L655? There is a label on the bottom.
    -Jerry

  • In BootCamp Stuck in Startup Repair.

    Hello I've Been using Bootcamp to play my windows games and becasue of its automatic update It turned off and i tryied to boot into it and now it's Stuck in Startup Repair and Now its Looping. Can anyone please help me get out of its annoying loop so i can play with my friends.
    Thank you on whoever Helps.

    Backups are always handy.
    You tried booting from the Windows 7 DVD and that too isn't helping?
    F8 Safe Mode can sometimes work and get you through.
    If checkpoints were being made, which is automatic default, you might but some driver updates and others can be trouble.
    If you can run chkdsk that is also sometimes able.
    If you are low on disk space...?
    Paragon Software CampTuneX $19 can redistribute space and check and see if it does more, like make an image.
    WinClone 4.x $29 is Mac utility to make a disk image of Windows (be sure to have non-system drive to use to store it on) and while slow and can fail on restore sometimes does have its uses.
    But try with Windows DVD -- and be prepared to reinstall. Windows 8 has improved the ability to refresh the OS and leave files intact, and added a better File History that is automatic once setup to make backups (but not a system image) and works similarly to TimeMachine in some respect.

  • Computer Stuck at Startup Repair

    Last night I ran a chkdsk. It took awhile, and it was towards the end of the night and I fell asleep. When I woke up it said chkdsk complete but under it said an error occurred. I reset using the power button. When it booted back up it would stay stuck at a blue screen with the cursor. I tried safe mode and the other options in f8 and still the same issue. When I tried it again, Startup repair came up and now it's taking forever saying, searching for problems.

    Hi,
    Do you have recovery media with you, which you must have created after setting up the laptop first time?
    Please test the hard drive - quick & extensive from BIOS, tap away f2 or ESC key as soon as you power on the laptop, enter System Diagnostics and do the tests. Wait for it to finish.
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Startup repair for hp pavillion o1710n vista..

    How to locate startup repair for hp pavillion o1710n vista. I have no startup disk as  the windows restore is on the D partion.  getting crash dump when doing scan disk.

    Hello chevaliet,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are attempting to locate the startup repair for your pavilion o1710n, and I would be happy to assist you in this matter!
    Since you are not able to use the RECOVERY on the D Partition, I recommend following this document on Obtaining HP Recovery Discs or an HP USB Recovery Drive. This should help you acquire a recovery disc necessary to replicate a RECOVERY partition.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Stuck in Windows Startup Repair Loop - U410

    Hey guys, back with another problem. I'm this close to just giving up on this laptop.
    I had used the laptop last night like to normally do - emailed some people, checked the mail, wrote some homework up. Shut down normally when I was done. I opened it this morning only to find thecomputer going into Windows Startup Repair.
    I shrugged and said okay. the repair happened quickly and it then took me to the normal loading screen.
    At which it stayed on loop for about an hour (I was able to watch a movie in the meantime on my phone only to see that it still wasn't done). I then forced shut down through the power button. Waited roughy a minute and then started t up again. This time I picked the option of Start Windows Normally hoping to see if a shut down from there would fix the problem. Only it was stuck on the loading screen for about twenty minutes.
    Force shut down again. I went back to starting windows repair like it prompted me to do. Another hour wait at the looping startup screen.
    I wish I could post a picture of the thing for you to see.
    This is roughly my sixth or seventh time trying to start the computer.
    I've also tried that method with the NOVO button as some posts say to do, but nothing is happening.
    Should I just take the laptop into my nearest bestbuy or future shop??

    I can't seem to access safe mode at all - I did the option of pressing F8 repeatedly but it seemed to ignore it and go into the option of either starting the Repair or running windows normally. 
    Once it does the repair, it stays on this screen indefinitely. The same goes with trying to start windows normally - it stays on the Loading Windows screen. 

  • Hp Pavillion Dv7 normal startup/startup repair go to blank blue Hp background Options

    I was recently minding my own business on the web when my computer seemed to freeze completely, I clicked a few buttons and then my computer turned itself off out of the blue. I turned it back on and it prompts me with two options, startup as normal, or startup repair, whichever I click has the same end; it goes through the starting windows fine but goes to the Hp blue backdrop screen and it's empty with just a mouse and a window which pops up for around half a second before closing..
    I have no disc to re-install, no usb to re-install, no option for safemode, and defiantly no patience.
    Any help is needed thanks

    I solved this problem today. I tested some of the components and it came down to the HDD. I just bought a new HDD (WD) and replaced the Samsung hdd that came with the notebook. The notebook responds very good now (like before). It seems something on the old hdd was corrupt because further tests (installing XP and Ubuntu) suggested SMART error. I didn't had much time to investigate further on why is this happening. The old hdd works fine on desktop as a secondary hdd.
    Most probably if the BIOS had an option to disable SMART the old hdd would of worked just fine. But with this new F23 (updated) BIOS you don't have a lot of options.

  • Hp Pavillion Dv7 normal startup/startup repair go to blank blue Hp background

    I was recently minding my own business on the web when my computer seemed to freeze completely, I clicked a few buttons and then my computer turned itself off out of the blue. I turned it back on and it prompts me with two options, startup as normal, or startup repair, whichever I click has the same end; it goes through the starting windows fine but goes to the Hp blue backdrop screen and it's empty with just a mouse and a window which pops up for around half a second before closing..
    I have no disc to re-install, no usb to re-install, no option for safemode, and defiantly no patience.
    Any help is needed thanks

    Hello mike211,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you have recently begun having issues with your HP Pavilion p7-1240 Desktop PC waking from sleep/hibernation mode properly. I am providing you with the HP Support document: Resolving Problems with Sleep and Hibernate Modes (Windows 7), which will walk you through troubleshooting your sleep/hibernation mode issue.
    Additionally, if the above document does not work since you stated that it has only been going on a couple days I recommend that you review and follow the steps set out in the HP Support document: Using Microsoft System Restore (Windows 7), which will walk you through restoring your system to back a few days to before the issue began.
    ***NOTE: This will not adversly affect your personal files, but it will affect any applications that you have installed between the day you choose and now as well as any settings you may have changed. The applications will need to be re-installed or settings re-changed.
    Please re-post if you require additional support. Thank you for posting this issue on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Help! Laptop won't start up- startup repair goes to black screen!

    Hi! Just wondering if anyone can help me with my toshiba laptop C650-152! I was online yesterday when my laptop froze and in the end i had to turn it off by cutting the power source! Today I have tried to turn it on and It keeps going to a black screen with white writing which asks if I want to Start it normally or do startup repair! If I press start normally it gets me to the windows start up screen (with the coloured logo) but then gets stuck there. If i press start up repair it goes to a black screen with a White mouse cursor and gets stuck there too! I can use a laptop just fine but am pretty clueless when it comes to technical matters so if anyone could help explain what I should do (in laymens terms) it would be much appreciated!! Thanks in advance for your help! Beth

    To burn the disc from an ISO file, Beth, you may need a third-party utility depending on the version of Windows. I use the free BurnCDCC burning program from here.
       TeraByte Unlimited Freeware
    To use the disc do I just turn my laptop on..?
    Something like this. Turn the computer on, load the disc, turn the computer off, start it again and then press F12 to get the boot-priority men, select the optical drive, follow the instructions (like choose a language and a Windows installation), and you're on your way to the Windows Recovery Environment.
    Then will a menu appear so I can choose to do a system restore or do I have to search for it? Finally will doing a 'system restore' delete any of my saved data such as photos/music/uni work?
    All that was answered at the link I already gave you.
       What are the system recovery options in Windows 7?
    Click Show All. Under System Restore, click the links What is System Restore and System Restore: frequently asked questions. No data files are disturbed by System Restore.
    -Jerry

  • Server 2012 R2 Essentials stuck in Automatic repair loop on every reboot

    We are running Windows Server 2012 R2 Essentials on a brand new Dell PowerEdge T110. Nothing new has been installed or are we running any special software. This server is a doing DHCP, Domain Controller and DNS. It is also intergrating the Office365. 
    I am assuming a windows update did this but i cannot pinpoint when exactly this happened and which update since it was a couple months ago. But everytime we try to reboot this server it goes to that Windows 2012 repair screen and asks us if we want to troubleshoot.
    I am able to break this loop by going into safe more and then rebooting but this doesnt fix it, it only allows us to then boot windows normally once after that. But this can only be done when we are onsite and not remotely so we havent rebooted this server
    or ran new windows updates in quite some time.
    Any help or input would be appreciated.
    Thank You

    Hi,
    On current situation, please use Bootrec.exe to troubleshoot this issue. for more details, please refer to
    the following KB.
    Use Bootrec.exe in the Windows RE to troubleshoot startup
    issues
    Meanwhile, please refer to the following similar thread and check if can help you.
    Windows
    Server 2012 essentials stuck in automatic repair loop
    Hope this helps.
    Best regards,
    Justin Gu

  • Yosemite stuck at startup

    I Have a MacBook pro with Yosemite installed and Windows 8.1 via Bootcamp. Couple of hours back I had used Windows and then now when I tried booting to Mac it's stuck on startup. Basically I see the loading bar go approximately 40% and then the display dims with a loading circle showing up below the bar. This circle keeps rotating for sometime and finally just stops. Leaving it idle for 15 mins causes the display to dim to go off until I tap space bar. I tried resetting PRAM and also checked disk and repaired the disk using disk utility but still no luck. Attaching screenshot of the screen

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • HP Pavilion dv6 7039tx Notebook-It was working fine and then it suddenly got stuck during startup.

    I own a HP Pavilion dv6 7039tx Notebook.  The OS is Win 7 64bit. I made 4 partitions after formatting the 1TB HDD as the C drive would not reduce to the  40GB size I wanted through disk management.
    It was working fine till now and then it suddenly got stuck during startup.
    I talked to customer support and they said it was a OS problem and I should order a set of 6 Recovery DVDs. i want to know if using the HP recovery disk
    1) Has an option to repair the system and leaves the disk partition unchanged?
    2) It resets the notebook to factory condition?
    3) There is an option of recovery disk which I should specifically ask for?
    Thanks!!

    Hi RanSri,
    I understand you are having issues with the HP Pavilion dv6 7039tx Notebook.
    You can restore it to a previous time when it was working correctly.
    This link for windows working correctly.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01835735&lc=en&product=5277768&tmp...
    Use this link if Windows does not open normally.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01835735&lc=en&product=5277768&tmp...
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • X1 Carbon Startup Repair

    Hi. I have a 3month old X1, which has been a near perfect machine... until the motherboard apparently failed a couple of weeks ago. Finally had a lenovo engineer visit onsite today to replace the board. All seemed good. Until unit was booted up. It has now hit the windows startup repair process and has taken 8hrs so far with the screen still stuck on 'attempting repairs'. I am aware this can take hours... so will leave overnight. What I am looking for is a plan B. Can I download a X1 Win7Pro 64bit rescue/restore package from somewhere, to make a boot USB and start a rebuild from scratch. Hoping and wishing for help. Thanks.

    Look at this thread:
    http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X1-Carbon-2014-Model-endless-bootloop/td-p/155...
    Unfortunately you are not alone.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • HT201262 Blue/Gray Screen Stuck on Startup: Best Actions In Safe Boot?

    My husband took his MacBook Pro into the Apple store for this problem a few weeks ago, but the blue/gray screen stuck on startup is back.
    We stabilized the system last time from running diagnostic utilities (Apple, Onyx) in safe mode. Is there anything else we should be doing for self help? He's upgraded to Mountain Lion and made all OS updates. Advice is welcome.

    See OS X Mountain Lion- If you see a blue screen at startup. I suggest the last recommendation - reinstall OS X:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • HP Envy 17-1181NR, Startup Repair / Recovery Manager / etc. not working

    Okay, I've read some other similar threads made recently ("HP DV7 Recovery Issues", "HP Envy 17-2100ex") but feel I need to ask for help for my specific circumstances.
    Model: HP Envy 17-1181NR
    Product No.: YL747UA#ABA
    SN: CNF0414VRL
    Hardware: 17.3" Notebook, Intel Core i7-720QM processor, 750 GB HDD, 6 GB mem ...
    OS: Windows 7 Home Premium 64-bit
    Noticed computer was running really slow last night and this morning, ctrl+alt+del to bring up task manager, eventually saw that somehow (maybe with a recent upgrade?) msmpeng.exe was started and running, though I had disabled it long ago. I killed the process tree within task manager.
    Looked online and read how much of a bother this msmpeng.exe can be and resolved to disable it again to keep it from starting automatically at Windows startup. So following what I read, ctrl+r, typed msconfig, used that to disable the antimalware services that launch/use msmpeng.exe and a couple other services that seemed completely unnecessary (I was 95% sure).
    Restarted machine to have changes take effect, came back to it minutes later frozen at a wallpaper that's blue with light rays coming down through it, as with sunlight through water. Mouse cursor moves, but unresponsive to all keyboard and mouse button input. Later discovered this screen is the background to the Recovery Manager, which was hung...
    Later discovered what had happened: that on the first restart, starting Windows normally, it reached a BSOD with message:
    "UNMOUNTABLE_BOOT_VOLUME" ...blah, blah, blah, * * * STOP: 0x000000ED (0xFFFFFA80064D8C00,0xFFFFFFFFC0000185,0x00000...,0x00000...
    Which flashed for a split second before auto-restart, this time stopping at "Windows Error Recovery" screen giving choice between "Launch Startup Repair" and "Start Windows Normally" again. The former happened automatically after 30 second or whatever time delay, and then after loading files, hung at the water-screen described earlier. I can repeatably encounter these two outcomes for the two choices on the "Windows Error Recovery" screen.
    Hitting escape after restart, and hitting F11 for "System Recovery" takes me to same water-screen hang point. I tried looking at system info, then doing system diagnostics, tried different scans and eventually the system tune-up scan. This failed with:
    Memory Test: PASSED
    SMART Check: PASSED
    Short DSTL FAILED
    FAILURE ID: 94UFL3-5B65QF-XD002K-6OUL03
    PRODUCT ID: YL747UA#ABA
    Hard Disk 1
    This made me think of a disc error and that I can't trust Recovery Manager to be launched correctly from the recovery partition, D:, so I popped in my recovery DVD (first of 5 burned from recovery partition much earlier). Choosing repair options in the startup from this disk, after changing the boot device order in the BIOS settings (F10), brought me to the very same hanging at the water-screen.
    I then tried F8 for "Advanced Boot Options" and various safe modes with the intent of reaching a command prompt to run "chkdsk /f /r" and/or "fixboot". But it can't get past loading the CLASSPNP.SYS driver. And without a command prompt now, I can't very easily copy in a pristine CLASSPNP.SYS from matching model / OS.
    Is this HDD gone bad, just coincidentally with what I'd changed? Or is this a software issue as I'd be inclined to believe? Any thoughts or inputs from anyone will be much appreciated. Thanks.

    Hi
    I found some info that may help you
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01890478
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01867124
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

Maybe you are looking for