HP PCL 6 - Problem with A5 printing?

Hello
We have this printer, HP PCL 6 at my work and it works great.
But i now have a little problem with printing A5 pages on both sides.
This works on A4 paper, but not A5
I have changed the parameters and told it to print A5 and envirement friendly printing ( two pages printing ).
But it still writes on 2 pages instead of 1
Can anybode give me a hint what im doing wrong?
Kenneth

Hello Kenneth,
Unfortunately, the A5 paper size indeed not supported by the Automatic Duplexer,
The supported sizes are as following:
Letter: 216 x 279 mm (8.5 x 11 inches)
A4: 210 x 297 mm (8.27 x 11.7 in)
8.5 x 13: 216 x 330.2 mm (8.5 x 13 in)
Legal: 216 x 356 mm (8.5 x 14 inches)
Executive: 184.2 x 266.7 mm (7.25 x 10.5 in)
JIS B5: 182 x 257 mm (7.17 x 10.12 in)
You may find the infornation listed under the Automatic duplex printing (two-sided printing) section below::
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Problem with the printer or ink system code 0x610000f6 HP model 6700 premium

Hello, I have recieved an alert for the second time in a week stating that there is a problem with the printer or ink system. The alert prompts me to turn off, then on the printer. If problem persists, contact HP. 0x610000f6. What could be the cause for this type of alert to appear?

'0x610000f6' error message appears if there is a 'Paper Jam' or a 'Carriage Jam' in the printer.
You can experience following issues:
The product won't print.
The print job stops unexpectedly.
To resolve Error code '0x610000f6' follow methods provided in below mentioned link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01620497

Problems with HP printer and PSE 11 (was bill v)

When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

I had already set it to borderless but it still prints a very small white
border. HP had no solution. I am ready to send the printer back to them.
In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time,
[email protected] writes:
Re: Problems with HP printer and PSE 11 (was bill v)
created by hyadav (http://forums.adobe.com/people/hyadav) in Photoshop
Elements - View the full discussion
(http://forums.adobe.com/message/6010537#6010537)

Problem with my printer "sorry not recognised"

Dispite posting the problem i had after MUCH hard work and searching for how to do this, i never got a reply (i thought this was a support forum), i hate to say it but support from HP has seriously gone down hill, i have a problem with my printer which is in warrenty can i send and email NOOOOOOO cos i have to put S/N and product number i put them in but i get "sorry not recognised" How the hell are you meant to get any support when they make 99% impossible to to post and email them i am sorry HP but your support is a shambles, your heads should be hung in shame.

Same problem and the same printer, Yosemite not recognize the printer (which I think is incredible, Windows was better in these areas to get a new OS).
Some advice from those who have been mentioned here and do not solve the problem?
If I had known I stay with Snow Leopard, worked best on Imac mid-2010.
Very unhappy with Apple, had understood that they were more serious and respectful to customers.

Pavillion G6. Shrunk C Drive, and formatted the other as I drive. Had some problems with my printe

I shrank C drive. that left me with another drive, which I formatted as drive I. The recovery drive is D, as it was when I received the computer. I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
When I try to use the recovery through Windows, it says factory reset is disabled?? When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
Any way I can put this all back to normal?
Thanks
Joe

517joe wrote:
I shrank C drive. that left me with another drive, which I formatted as drive I. The recovery drive is D, as it was when I received the computer. I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
When I try to use the recovery through Windows, it says factory reset is disabled?? When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
Any way I can put this all back to normal?
Thanks
Joe
You damaged the partition structure when you shrank C, see this guide to properly add a 5th partition after you get it restored using HP recovery media.
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-repartition-HDD-of-HP-notebook-with-...

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

There is a problem with the printer or ink system.

Will not print. Turn it off then back on; will print one document, but not the last page. Try printing only the last page, but will not print. Will not print one page documents at all. Will not print more than one document without repeating this process.
First Error message: "There is a problem with the printer or ink system. Turn the printer off, then on. If you continue to get this message, contact HP." Out of warranty.
Tried this page: http://support.hp.com/us-en/document/c03081973
Which led me to this page: http://support.hp.com/us-en/document/c03262508
Now that the ink cartridges are removed as instructed, the carriage will not return to the center of the access area.

Hey @KennyBee51,
Thanks again for getting back to me regarding this issue.
I would have to agree that the HP Officejets Printhead system is defective. I would recommend at this time that you contact our Technical Support queue by phone to explore additional hardware options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
It has been a pleasure working with you. I wish you luck going forward with this!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

I am unable to print a proper playlist in the jewel case format. Lines print on top of one another. No problem with other print formats

I am unable to properly print a playlist in the jewel case format. All lines bunch together. I have no problem with other print formats. Help please.

If it is a USB powered external, no AC adpater, that may be the reason. Mac notebooks are known to have low powered USB ports. You can get around that with a Y USB cable to connect to 2 USB ports at the same time.

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
However, I can not get a AV chat working to a real user....
In response to your suggestions:-
I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
Internet sharing is off.
I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
Thanks again

PROBLEM WITH LOGO PRINTING IN REVERSE DIRECTION

HI,
When Ever I take the print out of the checks, The company logo is getting printed in reverse direction, but if i look at the print preview , it is showing up correctly. even if i take the print out of just the logo from SE78, the logo is getting printed out in reverse direction...I think it is the problem with the printer settings, but i m not sure. Can any one please help me out with this issue,
Regards,
Raghu

Hi,
Are you trying to get this print directly from the backend or some frondend application triggers your form? As I also faced same problem many a times but then observed that when smartform was triggered from frontend, logo was always in its right position.
Regards,
Shikha

Problem with cheque printing in production Server Tcode - FBZ5

Hi
Cheque Printing using SAPScript with TCODE FBZ5.
I had a problem with cheque printing in production Server. TCODE - FBZ5
It is working fine in Development Server with proper alligned data but not coming alligned data in production server. I compared, dubugged and checked the allignment...there is no difference I found.
Could you please let me know, where the problem is occuring.
The amount is not coming properly and coming out of the box.....but it is coming properly in development server.
Sekhar

Hi,
For Amount field you must print like &amount(C)&. And it must be printer settings only. Because i gor same like this error while printing cheque. at that time Basis team had made the changes in printer settings.

HP PCL 6 - Problem with A5 printing?

Similar Messages

Maybe you are looking for