HP Printer and my Memory card

I have a digital camera, it's a Canon, and a memory card. I have always inserted the memory card into the printer to upload to iPhoto, and it's always worked fine. But this time, all the photos show up on the printer's screen, and iPhoto doesn't recognize the memory card. Thanks.

Please run the fixit from the following weblink to resolve the problem:
http://go.microsoft.com/?linkid=9743275
Also accessible from the following weblink:
http://support.microsoft.com/kb/967715
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

Dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

This cart reader is a kind of multi card reader and you can use different cards with it. In my opinion every multi device should be used very, but very gently. I do not know what happened exactly in your case but maybe you have damaged something inside.
Try to restart your notebook and use other SD card to check if everything works well. Please do it very gently and if you see something is wrong stop with inserting the card.
I use 1 GB SD card on my A200 without any problems.
In my opinion you should check notebook by technician.
Bye and good luck!

E 73 and the memory card????

Hi guys,
I just bought a new Nokia E73. I don't know for sure what happened it was working good but suddenly it asked me for the memory card password, which i don't have. I tried to restore all original phone settings but i couldn’t because it asked me about the security code. I don't know what to do now please I need your help.

Are you asking about the security code for both memory card and phone? The one for phone should be 12345 unless you have changed it your self. Are you sure you don't have set any password on your memory card before?

Updated my vivaz and the memory card has locked. how do i unlock it ?

Hi, i updated my vivaz last night and i didnt have the memory card in because i didnt want to lose anything. When i put my memory card back in, it says its locked and enter a password. I never put a password on the memory card so how do i sort this and why has it done this ? Its not the original 8gb that you got with the phone, its a san disk 16gb. Could anybody help me with this please ?
Solved!
Go to Solution.

This may be a long shot, but try 0000 this is the default code for all Sony Ericsson handsets.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

The colors are not true when i print and my sd card will not fit printer

The printer is hp7515 and the color of trees are blue and the water is purple,
i can not get my SD card to fit into printer

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

3110 Classic and Sandisk memory card

Hi
I have just acquired a Nokia 3110 Classic and wonder whether the Sandisk Micro SD cards are compatible, and, if so, what is the maximum memory supported by this phone?

If it takes microSD cards, then SanDisk cards should work fine (they usually are, to my experience).
I don't have your model, but I suspect that 2GB would be the maximum it can handle. Check the 3110 Classic accessories that Nokia lists on http://www.nokia.com (if 2GB cards are listed there, then they should work).

HT4356 I print from this app frequently with no problem however when I tries to print and configure folded card it is stalled

How do you get Martha Stewart craft studio to print without hanging up?

Hello, Iantoj.
Thank you for visiting Apple Support Communities.
I see you have a Epson SX525WD and this is a Wi-Fi capable printer. However, I do not see this model listed in the supported AirPrint printers at this time.
AirPrint Basics
http://support.apple.com/kb/ht4356
Regards,
Jason H.

I just want to be able to print my pictures and know where to send my memory card.

I just want to be able to print my pictures and know where to send my memory card. HP Photosmart Plus, Windows 7

please tell the complete printer name
using memory card frm printer or computer
if printing from computer go to my computer go to memory card or flash drive & acess the memory card & print the picture file that you would like to. If you like to print frm printer put the memory card to approprite memory card slot & then select the picture to print it will work

Transferring images from memory card in printer to iMac.

My camera just broke, and I am unable to download the pictures from my camera's memory card onto my Mac (I am using version 10.6.8). I usually just plug my camera into my Mac via the USB port, but I am now unable to do that. My printer has a memory card slot to use to print from, but I'm not sure I can transfer pictures from my card to my computer. I have a Canon MP560 multi-function printer. I just came back from a 2 week vacation and would like to see my pictures! Please help!

Glad that worked for you!!!
bethcrna wrote:
Thanks, everybody! It's all good. I had my printer set up wirelessly and it didn't work, but as soon as I plugged the USB port into my Mac instead of the wireless router, iPhoto came right up. Whew! Now I can see and edit my pictures. Thanks again.

I recently got a iPad camera connection kit hoping to directly download my photos from the memory card for my camera, a Sony Cybershot. When I put my memory card in the adapter and plug it in to the iPad nothing happens. What am I doing wrong?

I recently purchased an iPad camera connection kit hoping to directly download pictures from my camera to my iPad. When I put my memory card into the adapter and plug it in to my iPad nothing happens. My camera is a Sony Cybershot and the memory card is a Sony memory stick PRO duo 512 mb. I don't think I am doing anything incorrect. Is my camera/memory card incompatible with this adapter?

The Camera Connection Kit works with SD cards, not Memory Sticks.
Maybe you can find an MS to SD adapter, or use the USB connection with the USB cable that came with the camera.

N72 MMC MEMORY CARD PROBLEM AND PHONE PROBLEM

hello people i have a weird problem with my memory card and my cell N72.the music player is not opening sometimes because an error message is popping up saying '" not enough memory to perform operation" but i have 35 mb of free memory. i can play the songs from file manager.also sometimes the songs menu does open from music player but i cant trace the songs which i recently added a few days back though they can b played from file manager.Also in the playlists which i have created there are duplicate copies of some songs and the songs which i added recently added are missing. Also after removing my memory card i cannot send or recieve messages because error messeage pops up saying "not enough phone memory delete some data first to perform operation".this is really **bleep** me off as i can virtually do nothin with dis phone except callin people.Is it possible 2 get rid of this problem.if yes ,how?do i need 2 format my cell and my memory card.pls suggest a good antivirus software for this cell as i dont have one.any help will be highly appreciated.

1st, you do not need any anti-virus as that is not the symptom of a phone having a virus... press the menu button and dont let go, untill another "window" pops out (the one that look like the ying-yang symbol is the menu button) with this you will see if there is any application thatg is running in the background and is eating up your precious memory...
2nd, try just to turn OFF your phone and then ON again, i.e. reboot...
3rd, as mentioned by the other guy, save your data and try a factory reset
do also some search here, there many very detailed instructions here and allover the net... goggle can be your best friend...

Hi, I have a Lenovo 3000 n100 that does not recognize the dvd player or SD memory card slot

Hi, this is my first time on here so forgive me if I don't give all of the right information, I will try. Until about a month ago my dvd player and SD memory card slot worked fine. I was attempting to download pictures from the SD memory card to my laptop when for some reason it not only stopped reading the memory card but it erased it also. I tried to watch a movie on it to see if it was working and it is not. I checked the computer to see if I could manually turn it on and neither the memory card slot or the dvd player show up at all. Is this a driver problem and if so how do I fix it. Any help would be greatly appreciated. Thanks, Linda

I have struggled with the same thing, until about 1/2 hour ago....And its real simple. I'm not a techy but here's what worked for me.
Since Lenovo doesn't send boot discs you are going to have to create one. I went to http://www.ntfs.com/boot-disk.htm and downloaded the trial version - good for 10 days. If this works for you then you should buy the software (that goes w/o saying).
Once loaded to your machine you will need to create a DVD (CD may work as well, all I had was DVD's handy). Just lauch the application and it will do this for you.
Then you need to insert the DVD/CD into your player and restart the machine.
Once lauched the Software will lauch the Active@ Boot Disk menu. One of the options (going from memory here) was to give you a windows prompt. I simply typed c: and took me to the C drive. Then I typed chkdsk /f c:
I was then told my c drive was locked (sounds familiar I bet) but this time I was given the option to dismount the volume which I did. And it finally ran chkdsk, found and corrected all errors.
I rebooted my machine, launched diskeeper, and guess what - I can finally defrag my harddrive now which is sorely overdue!
Good luck. I hope this works for you!

Remote lock & Memory card corrupted issue

Remote lock & Memory card corrupted issue
Hi Dear Friends,
You might have experienced the "Memory card corrupted issue."
Don't panic! The solution is here!
Your memory card is just 'locked', it isn't 'corrupted'!
For sure, this post would be of great help to you, if:
• You have enabled the "Remote lock" feature of your Nokia device.
• You have sent the remote lock message to your device and locked it remotely.
Finding the solution really took me a lot of time. I was inspired by various posts on the Discussion, and decided to find the official notes on the issue. So would like to thank those who shared their tips, and helped us solve this problem.
I'm using E66, (you might use something else), and would refer to E51's and E65's User guide so often.
Of course, I'm not going to explain the instructions, and recommend you to refer to your user guides when needed.
On the contrary, I'm going to explain what may not be mentioned in your user guides.
Let’s Begin
What Has Happened:
In short, you attempted to test the feature, your phone was locked, you keyed in the lock code, code was accepted, you used the phone for a while, switched it off, powered it on, you were prompted the Lock code, you keyed in the lock code, code was accepted, you attempted to view some stuff that was on your memory card, you didn't find it, you tried to run a program that was installed on your memory card, the program icon didn't open, you put the memory card in the card reader and connected it to PC, it was not detected, you went to Menu> Tools> Memory card> You saw "Memory card corrupted"!
Don't, don't select the Yes selection key if you got the caution message, "Memory Card corrupted, reformat it?" because your memory card isn't corrupted, it's simply being locked!
But you can't find the unlock memory card command in Menu> Tools> Memory card> Options.
So? What to DO?
1. (This step is optional) Disable the Remote lock feature.
(Refer to your user guides) and change Allow Remote Lock> to no.
Then, while the unit is on,
2. Press the power key briefly, and select Remove memory card.
3. Remove the memory card from the slot.
4. Press OK if prompted.
5. Reinsert the memory card in the slot.
6. Reopen Menu> Tools> Memory card.
Is your memory card detected? If yes!
7. Follow tips number 2 & 3 of What to Know section below.
Did you get "Password removed" message?
If no, be careful of the case of the first character.
If you had changed the Remote lock message many times, use the one that was practically sent to the device via text message.
. In case you had set a password on your memory card before, you may also attempt to unlock the locked memory using your own password, not the first eight characters of the remote lock message.
Step seven would make the memory card detectable to the connected card reader to the PC too.
8. The memory card is detected temporarily, but it is locked and the "memory card corrupted" issue reappears every time you switch off/on the phone, unless you successfully complete step seven.
What to Know?
Official User guide Tips:
1. Remote locking also locks your memory card. (E51 page100)
. Yes, the one mobile phone that sends your device the predefined remote locking message, receives the confirmation message in response, indicating, "Mobile telephone and memory card are locked". But it isn't written in E66's and E65's.
2. To unlock the memory card, select Menu> Tools> Memory> Options> Remove password, and "enter the remote locking message as the password". (E51 page100)
. Yes, quite clear, but the quoted part ("enter the remote locking message as the password") isn't written on my E66's User guide, and there's a vague precaution on E65's, (refer to number 4).
3. If the message is longer than 8 characters, the first 8 characters are used as the memory card password. (E51 page100)
. Yes, quite clear good E51, but I don't own you; I have E66 your little sister. I owe my memory card's survival to nice users on the Discussion.
4. The maximum number of characters allowed is 8. Using more than 8 characters could prevent unlocking the memory card and require reformatting it. If reformatting the memory card is required, all information on the card will be lost. (E65 page28)
. Quite interesting, but it contradicts what good E51 says in number three¡!
. And it contradicts my own experience of the issue (and some other users' on the Discussion) too, since my E66's memory card accepted the 'first eight characters' of the 'ten-character long’ remote lock message that I had previously used to remote lock it.
. The first three tips are quite important and shouldn't have been excluded from E66's and E65's user guides. I don't have the time to download and review all the user guides that support this feature, but at least I read some user manuals and also got the impression (from the posts on the discussion) that there had been not enough information on E66's, E65's, E71's, N96's, and some others.
You may like to do a simple search on Google:
"The first 8 characters are used as the memory card password" site:nokia.com
Since the content of the user guides on the server seem not be searchable for any reason, you won't find any official support result except those of the good users on the Discussions. And the 'Nokia Site Search" brings no result too. (At least on the date of this post).
¡ Terribly sorry for those who have selected Yes to the Reformat caution message. It wasn't your fault. But there's an idiom that says, sleep on it! "Think about it for a while before coming up with a decision".
But now that you have tested the feature and know its solution, don't be afraid, and enable the Remote lock feature again! God forbid, but it may be needed one day!
Yours,
http://nds1.nokia.com/phones/files/guides/Nokia_E51_UG_en.pdf
http://nds1.nokia.com/phones/files/guides/Nokia_E65-1_UG_en.pdf
http://nds1.nokia.com/phones/files/guides/Nokia_E66-1_UG_en.pdf

Dear, I guess, / This article doesn't suit your case. / • You have not enabled the "Remote lock" feature of your Nokia device. / • You have not locked your device remotely. / Because you don't know where the remote lock is and haven't played with its settings. / You need to explain what has happened. / The only thing we get is that your memory card doesn't open. / 1. your phone model, e.g., 5130. / 2. What did you do recently that might have caused this issue? / 3. What methods did you try to unlock it? / Use some of the tips provided above. (except number 1). / Yours

Nokia C2-03 Set Password for Memory Card

Hi All,
I m using C2-03, I found an option to set password on memory card.
Apps and Games > Memory Card > Mem. card opt. > Set password
for my privacy I set a password but the Memory card still opens without asking. Can anyone plz inform me how do I secure my private data using password?
Thanks,
Khaild.
Solved!
Go to Solution.

It will continue to open up without the password. The password will only be asked if you insert the memory card in a different phone and it is only required once. It will keep opening up normally from the next time.
That password isn't there to keep your memory card protected inside your phone but instead to keep others from using your memory card. As long as the password is there, the phone can't be used on any other phone or even on a PC through card reader.

Memory card files not showing up

hi,
i have a 6230 and i use pc suite, but in mobile phone browser my memory card does not show up. all the other files are there, and the memory card works fine in the phone.
any ideas?

Hi,
If the above doesn't work, please find out what software version your phone has by typing *#0000# into the keypad. If it is an oldish one you might consider a SW upgrade.
SR

HP Printer and my Memory card

Similar Messages

Maybe you are looking for