HP Quality Center - Version 11 - Requirement Module View Filtering

Hello,
Is there a way to set a filter view to apply to all users based on the User Name/ID and requirement status? I would like to set the requirement view to only display active requirements assigned to the user signed on.  It would be great if I can set up the filter or add code under the script editor where it will display automatically or can be added as a public favorite that anyone can use.
Any help is greatly appreciated.
Thanks.

Hi,
Please check the following link:
   http://h30499.www3.hp.com/t5/Quality-Center-Support-and-News/Upgrading-to-QC-11-or-ALM-11/td-p/23917...
I remember we had to pay for the upgrade.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP Quality Center - Version 11 - Refresh Requirement when opening

    Hello,
    Is there a way to set up a requirement to automatically refresh prior to it opening (to show most current update).  Currently, if there is a user (user 1)  with the screen sitting on the requirements module and a user (user 2) making updates while user 1 is idle - the requirement does not automatically show the updates when user 1 opens the same requirement after user 2 completes the updates.  User 1 will have to manually refresh the screen for it to get updated immediately.  By user 1 not refreshing, the requirement does not shows the updates until after user 1 makes a change to the same requirement or upon closure of the requirement.
    I tried using "Actions.Action("actFilterRefresh").Execute" but it did not work (unless I set it incorrectly).
    Any help is greatly appreciated.
    Thanks.

    This issue is usually due to having multiple monitors, particularly when used with a laptop where the configuration can frequently change. For example, when at one location, the display settings are such that the laptop is on the left and the secondary monitor is on the right, but at another, the laptop is on the right and the secondary monitor on the left. Applications remember where windows were when last opened, so if the monitors are not configured in the expected order, the window may be "invisible" when next opened. What is actually happening is described in nathanielcoyle's response regarding the coordinates of the window.
    The solution is to go to the Display settings under Control Panel and reverse the order of the monitors. It may alternately help to change which monitor is considered the main display (this is just a theoretical guess). If you use dual monitors at work but only have one (your laptop) at home, you're pretty much hosed until you get back to work or find another monitor to plug in. That is, of course, unless you happen to have your QC administrator on speed dial to implement nmailey's solution.
    Preventive measure: Always bring windows back into your main display before closing them.

  • Quality Center Version 11 - Re-arrange Requirement Tabs/Pages

    I have set up 5 requirement tabs (3 with user/system defined fields and 2 memo tabs).  Is there a way to re-arrange the order where I can move the memo tabs in between the tabs with user defined/system fields? 
    I tried assigning pages through the Script Editor but it does not work.
    Any help is appreciated.
    Thanks

    I have set up 5 requirement tabs (3 with user/system defined fields and 2 memo tabs).  Is there a way to re-arrange the order where I can move the memo tabs in between the tabs with user defined/system fields? 
    I tried assigning pages through the Script Editor but it does not work.
    Any help is appreciated.
    Thanks

  • How to test the SAP modules like SD and MM By using Quality Center and QTP

    Hi Experts,
    How to test the SAP modules like SD and MM By using Quality Center and QTP. Can you please provide the documentation regarding this.
    Regards,
    Skumar.

    Hi Sampath,
    First install QTP and SAP Addin with in QTP.
    2nd use QC to develop the test plan and then convert that test plan design to Test Scripts (QTP vesrion using settings)
    3rd record the R/3 GUI screen of SAP for SD, MM like Create order or Create PR.
    Once recording is done QTP will create a script in VB
    SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access  -  User").SAPGuiOKCode("OKCode").Set "/nVA01"
    SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access  -  User").SendKey ENTER
    you can always add a parameter and other customization according to your requirement.
    Let me know if you need more information regarding this.
    Good Luck!

  • Function Module to get a work center's capacity requirements (load) within a given period

    Hi all experts,
    Currently I’m doing a capacity summary report similar to CM01, but with a summarized capacity availability and loading for a period.
    Selection Parameters: Work center range from and to, Period from and to
    List Format: Work Center, Avail Capacity, Loaded Capacity, Free Capacity, Load %
    I have found a standard function module (FM) to get work center's available capacity for a period, but still facing the challenge to find a FM to get a work center’s capacity requirements (load) in a period.
    I have read through all the related threads from the web, and tested the recommended FMs, but still cannot get a right result.
    Please help to provide some leads for a FM or the logic.
    Best Regards
    Philip

    Hello Philip
    The following function modules should be useful:
       - CY_PRIMARY_SELECTION            - Function module for selection of orders for the work center
       - CY_SECONDARY_SELECTION          - Check for additional criteria
       - CR_CAPACITY_AVAILABLE_PERIODS   - Reads the available capacity from work center
       - HR_PERSON_READ_TIME_INFO        - Reads the available capacity from person (modification)
       - CY_GET_PART_CAPACITY            - used only for the first period to read backlog
       - CY_LOAD_DISTRIBUTION            - Distribution key
    Please observe that these are simple function modules, not BAPIs, That means, they were developed to be used on the SAP internal programs and they are not supported by SAP when used in custom programs.
    BR
    Caetano

  • JBoss Permissions issue (Quality Center 11 Installation)

    I'm currently trying to install HP Application Lifecycle Management/Quality Center 11 on my Amazon EC2 box running Windows Server 2008.  I am logged into the box as Administrator.
    I'm trying to install a trial Version of Quality Center Enterprise, using the Administrator account and password for any login information.  When I get to the "Database Server" step and hit next (MS-SQL (Win Auth.)), I get the error "You must run the installation wit h the same user name that is used to run JBoss as a service."  Which, as far as I'm aware I am.
    Any help here would be appreciated.

    first create a system with the requirements what qc needed
    follow this link for installing   qc .
    use my sql with windows auth(localhost:1433)
    site Adminstrator User: username/password
    hP ALM service
    username =windows username
    password = windows password
    domain = it will be you full computer name(if you dont know where to find follow the steps  . right click My Compute >> properties  >> you can see the full computer name)

  • Using Quality Center (v9.0) to automate testing in SAP- questions/guidence

    Hi,
    First time on the expert forums for me. Hope you are able to help provide some guidance on this area for me.
    Overview is our client is looking to fully automate testing in SAP for patches/upgrades/new developments by using Quality Centre v9.0 (which was implemented for test management as part of upgrade to SAP ERP 6.0)
    I am starting to investigate this for them and looking for some answers on queries I have / guidance on whta is required to meet this objective.
    - I have read mention of "SAP Quality Centre". Is this different to HP Quality Centre that we currently have installed? If it is different to HP QC do you need the SAP Quality Centre version installed to be able to automate the testing? Or is SAP QC if you just want to do it stand alone without using Solution Manager?.
    - To automate testing in QC 9  is the implementation of SAP Solutions Manager required to enable it?
    - Are other tools required to be implemented to enable the automation of testing in SAP ERP with HP Quality Centre ? eg for the process modelling (I read about the use of ARIS earlier?) or is the modelling done in SAP Solution Manager functionality?
    - Is there qa brief overview anywhere on SAP or HP site that states the steps to automate the testing. eg Is the detail in QC for the transactions/parameters to use for each test or is this in SAP Solution Manager/Modelling tool? Also effort required in the implementations that are required (application wise) and effort required to get tests set up to the level required for the automated testing. 
    Any help/advice is greatly appreciated. As you can tell I am coming at this form a point of nearly zero knowledge on how it all fits together/effort required.
    Thanks

    Hi
    I luv solman so if u ask me i can do all with solman itself and say not  to go with Quality center
    but again it is upto project requirement
    it is very easy to build the automated scripts in QTP etc used with Quality center but again bit more complicated in ECATT
    its upto the ur decision but if u r gng with manual test case management forgot quality center and go with Solman
    So far i have done 5 Test Management implementation including both type of test casees automatic and manual and all are managed with solman
    moreover if u get service desk configured in place then its integrated with solman test management whic helps u a lot.....
    one step ahead go for Change management.
    Hope it ans ur query
    Regards
    Prakhar
    Edited by: Prakhar Saxena on Jun 9, 2010 12:06 AM

  • Hp Quality Center Adapter for Solution Manager two-way

    We just recently installed the SAP Adapter for Quality Center 2.0.  The installation worked to the point of sending requirements to QC but when we try to send test results to Solman we just get a "In progress" and it never completes. 
    We reviewed the QC logs and we don't see the url information for Solman in the log. It just blank.  Does anyone have any idea of what the issue could be.

    Hi
    I'm actually in a project where we want to integrate SAP SolMan Stack 18 (EHP1) with HP QC 10.0. So, to my knowledge, we need to have from SAP the SAP Adapter for QC 2.0 (which you have installed) and from HP the HP Enterprise Integration Release 2.0.
    My problem now is, that I can't find anywhere on sap.com this SAP Adapter for QC 2.0. There is only 1.0 available.
    So, as you can imagine, I would be very eager to know where you got this Version 2.0?
    At the moment we got, officially from SAP, this name form a responsible in India who we should contact and nothing else.
    Thanks for clarifying and helping.
    Thomas

  • Quality Center 11 (ALM) Query - Integration with Subversion and Jenkins

    Hi OHPCPaT Forum,
    Are there any restrictions to enabling the QC integration with Subversion and Jenkins when the QC server is a SaaS cloud instance? Is there any additional config I should be aware of?
    Thanks in anticipation

    Hi,
    Yes all the users are facing the issue. Please find more details for the issue.
    Currently we are upgrading Quality Center 10.0 to 11.0 with HP Enterprise Integration module for SAP applications. The project successfully upgraded from QC 10.0 to 11.0 but there are some error popup for the project for which Application Module and Enterprise Integration for SAP applications Version 2.6 was enabled
    Quality Center Details:
    HP Application Lifecycle Management 11.00
    ALM patch level: 07
    Quality Center 11.00 Enterprise Edition
    Component     Build
    OTA Client     11.0.0.6051
    User Interface     11.0.0.6051
    WebGate Client     11.0.0.6051
    Test Run Scheduler     11.0.0.6051
    Execution Flow     11.0.0.6051
    Site Administration Client     11.0.0.6051
    Extension Version     
    Enterprise Integration for SAP applications     2.6.0.3232
    Sprinter     11.0.0.6051
    Application Model     2.6.0.917
    Installation Steps followed:-
    1.Installed HP ALM
    2.Installed Patch Service Pack 2 (Patch 2,3,4)
    3.Installed Patch 6
    4.Installed Patch 7
    5.Installed the Extensions HP Enterprise Integration module for SAP applications using Extension Deployment Tool by following the steps provided in the Addin Page
    6.Created new project in HP ALM
    7.Login to the project (no issue)
    8.Enabled the Project Extensions
    9.Login to the project (able to access the project but error message is popup when we access Test plan and Defect module)
    Note: There is no error when we access the project for which the HP Enterprise Integration module for SAP applications EI not enabled. QC 11.0 is not integrated with any tools.
    Let me know is there any step we missed or we need to do any manual steps we need to do before enabling EI

  • Solman + Quality Center 9.2 Integration

    Hi
    Has anybody used the Solution Manager and Quality Center 9.2 together. I am wondering if there is a plug-in available to integrate solution manager with quality center 9.2. If anybody can throw some light, the help will be highly appreciated.
    I am aware that there was a plug in available for the earlier version Test Director 7.0 and Solution Manager. But with the new version I am not sure.
    If anybody can throw some light as to what are the advantages and disadvantages that will really help us decide for our work.
    Thanks
    Rakesh Jain.

    Hi Praveen,
    I am getting the same error
    "No requirement found in project <Project name>
    Message no. QC_INTEGRATION030"
    we are using Solman Ehp1 and Quality Center 10.0 patch 16
    Please help
    regards
    Naveen

  • FREC Error while Generating Reports in Quality Center

    Hi,
    We usually generate reports using Dashboard module of Quality Center . While generating reports on  a particular PC, we are getting the following error.
    The SQL Query <sheet1> has failed to run, with the following error:
    Returned Result is not valid FREC.
    We are able to generate the same report on a different PC.
    Does anyone encounter this issue earlier? Could someone help us out in solving this issue.

    Issue popped up with me a few times and seemingly uncontrolled.
    I resolved one query with replacing quotes in the string i.e. replace single with double by replace([field],chr(39),chr(34))

  • JavaHelp 1.0 is required to view the JavaHelp output?????

    Hi All,
    I'm getting this dialog after I have generated the JavaHelp.
    "JavaHelp 1.0 is required to view the JavaHelp output. Please
    install the latest version of JavaHelp"
    But I have allready installed this "C:\jh1.1.3" and inserted
    these 2 System variables "JAVAHELP_HOME" - "C:\jh1.1.3" and
    "JHHOME" - "C:\jh1.1.3".
    I have allso installed "j2sdk1.4.1_01".
    What else needs to be done?
    BR
    Thomas

    I faintly remember a problem with Robohelp and JH1.1.3 a
    couple of years ago, I don't know if this was ever resolved.
    I have found the following that might help.
    Click Here
    Just found a link to the following Forum thread on Peter
    Grainge's site
    Thread
    here
    Hope this helps.
    Brian

  • GL Center is a required field!  Check file definition format in file header

    Hi
    I am new in Hyperion FDM. I am trying to load a txt file using multiload feature of FDM. I have created a VBScript to load data. When i run the script it finishes without error but doesnt load any data. I get the following errors in the log file
    ** Begin FDM Runtime Error Log Entry [2012-01-29 16:20:07] **
    ERROR:
    Code............................................. 2621
    Description...................................... GL Center is a required field! Check file definition format in file header (Lines 1-6)!
    File=10_SAMPLE_Actuals_JAN - 2011_RM.txt
    Procedure........................................ clsMPLoader.fStructGetText
    Component........................................ upsWMPLoaderDM
    Version.......................................... 1111
    Thread........................................... 3212
    IDENTIFICATION:
    User............................................. admin
    Computer Name.................................... RAJNEESH
    App Name......................................... testfdm1
    Client App....................................... WorkBench
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... orcl
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... SAMPLE
    Location ID...................................... 748
    Location Seg..................................... 2
    Category......................................... ACTUALS
    Category ID...................................... 12
    Period........................................... Jan - 2012
    Period ID........................................ 1/31/2012
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    Here is the contents and format of the text file that I am trying to load
    SAMPLE
    ACTUALS
    Jan - 2012
    1
    R,M
    a,v,e,v
    a1,version1,e1,100
    a2,version1,e1,100
    a3,version1,e1,100
    Obviously there is something wrong in the txt file above. Can anybody let me know whats wrong I am doing. I also see following error in the tbatchcontents database table after the VBScript finishes running
    10_SAMPLE_ACTUALS_JAN - 2011_RM.TXT_CHECK-IN-FAILED (CODE=2621)
    Need your help. Thanks.
    Edited by: rajneesh sharma on Jan 29, 2012 2:02 PM

    Please see this post => Essbase Multiload
    Thank you,
    Todd Rebner

  • How do i start doing SolMan integration with HP Quality Center?

    Hi guyz,
    I am new in this SAP field with zero knowledge on it and my first task being assigned to me is to integrate SolMan with HP Quality Center. So how do i start? What do i need to know before doing the integration? As iI know by far SolMan need to have QC adapter to communicate with HP Quality Center. What is the adapter anyway? Correct me if i'm wrong. Really need you guyz expertise on this. Thanks.

    Hi,
    The SAP Solution Manager Adapter for SAP Quality Center by HP is an interface between
    SAP Quality Center by HP and SAP Solution Manager. SAP Quality Center by HP extends
    SAP Solution Manager testing capabilities u2013 together they achieve a full integration of test
    people, test processes and test data in the SAP Solution Manager Application Management
    Platform. The integration on SAP Solution Manager side is realized via the SAP Solution
    Manager Adapter for SAP Quality Center by HP.
    After installing the Adapter, please check the Note: 1285941 for the installation of EIM versions and Solution Manager versions.
    Please refer how to guide in Learning Maps.
    https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000706460&_SCENARIO=01100035870000000202&
    We have to check for the activation of SM_QC_AD Enterprise Addon from IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate
    Solution Manager Enhancements.
    Then follow the IMG activity transaction spro: Scenario Specific Settings-> Third Party Integration-> SAP Quality Center by HP-> Integration Test Management & Integration Defect Management.
    Hope this helps.
    Thanks,
    Raghavendra.

  • SolMan integration with HP Quality Center

    Hi Friends,
    Is there any way by which we can integrate Solution Manager with Mercury Quality Center?
    Please let me know.
    Thanks,
    Rock

    Hi Rock,
    The short answer is - yes, you can, after buying a 'Adapter' that SAP sells.
    I am not sure if you have already seen some relevant pages and still have this doubt. In any case, I have listed some places where you would find relevant literature.
    (1) http://service.sap.com/rkt-solman
    In the above link, after supplying your OSS ID and password, you have access to various training documents. One of the links contain SAP Tutor and PDF files on this subject.
    (2) For Adapter information, please got to the following link:
    http://service.sap.com/upgrade
    Click on Product Availability Matrix and then search for Adapter QC in Quick Search for Product Versions  box.
    You would get a window message that confirms that the Adapter is made available by SAP since 13.03.2008
    (3) You also find some more information from 'Online Help' section on Solution Manager
    Trust this helps.
    Regards,
    Srini

Maybe you are looking for