HP SERVER SCSI U320 PCI-E ADAPTER [412911-B21] windows 7 x64 driver?

Hi,
the card 412911-B21, can be installed on windows 7 x64?
I only found these drivers: http://goo.gl/woBrl
Thank you

Hello Mr. Wells,
Thank you for your question.
However, the Small Business Support Community is limited to Cisco Small Business Products, and the Aironet products are considered as a Enterprise level devices.
I recommend you to post this question on the on the correct forum, in order to get a better response.
You can move your post using the Actions panel on the right.
Best regards,
Diego Rodriguez
Cisco Small Business Community Engineer

Similar Messages

XI3.0 Receiver file adapter write to windows shared drive

Hi,
Our XI server SP09 currently runs on windows 2003 server, I wish to use the receiver file adapter to create a file on another windows server. I have created a folder on the other server and set permissions so that anyone can read and write to it.
The communication channel has been set-up with a target directory of //server/shared_folder/folder and a transport protocol of 'File system(NFS)'
When I try and send an XML message to the file adapter I get the following error on the runtime workbench :-
Last message processing started 09:47:10 2005-06-09, Error: Message processing failed with java.lang.Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
My questions are as follows :-
a) Do I have the target directory on the communication channel set-up correctly? i.e. do I use / or \
b) What username will need to be set-up on the other server so that the file adapter can write to the shared folder
c) Is there another way of providing user and password information for connecting to the other server?
Many thanks
Ian

Hi Ian
as i understood from ur description is that u want ur file to b generated in some other machine then u have to mention that machine in ur SLD using correct specification..
u go thru this link in order to get more Clearance..
http://help.sap.com/saphelp_nw04/helpdata/en/31/f0ff69551e4f259fdad799a229363e/frameset.htm
Hope this ll help u.
Regards
Shailesh

Jul 30 15:01:23 server scsi: [ID 107833 kern.warning] WARNING: /pci@1e,6000

Hi,
I need help regarding below kernel warning message :
Jul 30 15:01:23 server scsi: [ID 107833 kern.warning] WARNING: /pci@1e,6000
I am new to solaris, and am unable to understand this.I want to know,
1) What this warning exactly means.
2) Is this warning important or can be negated.
3) what causes this warning to generate again and again.
Please let me know if you want any further information regarding this.
Thanks & Regards,
Girish

That error message is something to do with a storage device. But its cut off, /pci indicates a pci card, and 1e,6000 is a partial address to the card. You need to post the next few lines as well.
.7/M.

Hp netserver 10 100tx pci lan adapter driver for windows 7

Hello,
I bought a new notebook HP Pavilion 15-e036sc with windiws 8 (64bit). I uninstalled this windows version and I installed windows 7 (64bit) with servis pack 1, but I can´t connect to internet, because windows haven´t driver for net adapter (hp netserver 10/100tx pci lan adapter). Where is download the driver for my net adapter for windows 7?
Thanks!
Pavel

Hi pajyn, welcome to the HP Forums. It doesn't appear as though HP offers Windows 7 drivers for your notebook.
HP Pavilion 15-e036sc Notebook PC Drivers
You will have to determine which network module is installed, and find the drivers from the manufacturer, if they exist.
These instructions might help you get the PID and VID keys. Avoid any downloads from this site as I have not verified their integrity. How to Identify Unknown Devices in Windows
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

MS SQL Server Stored Procedure - JDBC Receiver Adapter

Hi,
I am calling a stored procedure in MS SQL Server using the JDBC Receiver Adapter. The stored procedure takes 1 input parameter which is a VARCHAR field. The stored procedure's input parameter and the input parameter are identical. My target structure looks like:-
<STATEMENT>
<storedProcedureName action="EXECUTE">
<TABLE>SP_REPROCESS</TABLE>
<input1 isInput="true" type="VARCHAR">1</input1>
</storedProcedureName>
</STATEMENT>
I am getting the following error:-
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_REPROCESS' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: String or binary data would be truncated.
Any suggestions.
Thanks.
Krishnan
Edited by: Krishnan on Jul 17, 2008 7:07 AM
Edited by: Krishnan on Jul 17, 2008 7:07 AM
Edited by: Krishnan on Jul 17, 2008 7:48 AM

hi,
can anyone help me to fix this issue.
In MONI, i am able to see the output xml as :-
<?xml version="1.0" encoding="UTF-8"?>
<ns0:REPROCESS_DATA_MT xmlns:ns0="http://abc.com/db/integration">
<STATEMENT>
<storedProcedureName action="EXECUTE">
<TABLE>SP_REPROCESS</TABLE>
<input1 isInput="true" type="VARCHAR">1</input1>
</storedProcedureName>
</STATEMENT>
</ns0:REPROCESS_DATA_MT>
in the communication channel monitoring --> in the JDBC receiver channel, I am getting the following error:-
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_REPROCESS' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: String or binary data would be truncated.
thanks.
krishnan

E-MU 0404 PCIe Digital Audio System for Windows server

E-MU 0404 PCIe Digital Audio System for Windows server
Is it possible use E-MU 0404 PCIe under Windows Server 2008 or 2012?

Originally Posted by Mike76
E-MU 0404 PCIe Digital Audio System for Windows server
Is it possible use E-MU 0404 PCIe under Windows Server 2008 or 2012?
For windows Server 2008 and Server 2012 you may need enable Desktop Experience Feature
The Desktop Experience Feature enables a bunch of stuff that is by default present on a desktop OS. Most importantly it includes Themes, Windows Media player and the Aero related features. You will have to enable it form the Server Manager. The "Turn Windows features on or off" / "Add remove windows components" has all been rolled into the Server Manager now.
Server Manager > Features > Desktop Experience
Installing the Desktop Experience feature does not enable them. You have to manually set them up.
After that Windows Server 2008 == Vista x64
Windows Server 2008 R2 == Windows 7 x64
Windows Server 2012 == Window 8 x64
So just use the appropriate desktop drivers - that are available

Vi-based server for Adlink PCI-6208V

I wrote vi-based server for Adlink PCI-6208V and used functions to communicate with this card. I tested it with interactive server tester. Everything was good. I also wrote client program to manage this card. The problem is that: when I start tag-engine, server doesn't start and such mistake as "...VI contains inconsistent functions" is shown. What should I do?

1) I am using LabView 6.1 and DSC 6.1
2) I created vi-based server such as in examples for DSC 6.1. The same thing witn the client.
3) There was no error number with error (look at the picture in the attached file).
4) Tag-engine works normally when I don't use the functions to communicate with the card.
I attached very simple version client and server.
Attachments:
Server.llb ‏1333 KB
client.llb ‏931 KB
ENNUM_Register.vi ‏72 KB

G-tech espeed SATA PCIe Host Adapter safe to install with SL?

I have heard that there is an issue with esata express cards.
Is the PCIe Host Adapter safe to install to a Mac pro running SnowL?

I spec Burly arrays from MacGurus for my clients.
They are built like tanks, have two fans, and tech support, as well as customer support, is great.
http://www.macgurus.com/productpages/sata/BurlyPortMultiEncl.php
I buy them without drives, then add Seagate 7200.11 drives. The jury's still out on their 720.12 series. The 7200.11 series had a firmware issue months ago that has been resolved.

880GMA-E35 does not detect PCI ethernet adapter

Mainboard 880GMA-E35 does not detect PCI ethernet adapter RealTek RTL8139D.
What is the reason?
I did tests with the operating systems Windows XP 32-bit and Windows 7 64-bit
my Computer:
MSI 880GMA-E35
AMD Athlon II X2 240, 2800 MHz
2 X 4GB Kingston module memory 1066 MHz
XFX Radeon HD 4670

In your manual (page 27) it shows 'Auto Disable DRAM/PCI Frequency.. 'Enabled' turns 'off' clocks in the PCI slot.
Just wondering in an attempt to help.
Good Luck

D-Link PCI Wireless Adapter

Hello,
Does anyone know where I can locate some device drivers for a D-Link PCI Wireless Adapter??
I have a D-Link DWL G510 adapter and so far have been unable to find any dirvers for it.
I called D-Link and they do not support any unix/linux device drivers.
Thanks!

I'm in a similar situation you are; I have a Linksys Wireless USB Apapter, ver 2.8, can't find drivers.
Lynnsoft: www.lynnsoft.com provide wireless drivers for other linksys and netgear products.
Good luck. Re-post if you find any good info.

D-Link PCI Wireless Adapter Drivers?

Hello,
Does anyone know where I can locate some device drivers for a D-Link PCI Wireless Adapter??
I have a D-Link DWL G510 adapter and so far have been unable to find any dirvers for it.
I called D-Link and they do not support any unix/linux device drivers.
Thanks!

Hi, have you found any drives yet for the dlink ? I am trying to use Solaris on a Toshiba Satellite, and would like to use a dlink wireless card, my card is a Dlink DWL-G630 and comes with Drivers for XP but nothing for linux/unix. I might add that it is supported by other linux distros and I'm wondering why Sun isn't supporting this plug and play yet, how can I wander around with my laptop if I won't be able to pick up a signal? thanks

Anyone recommend a PCI USB Adapter?

Does anyone have a PCI USB Card that is working well on x86_64? Can you post the brand and/or model?
I'm having issues with my built-in USB ports and I'm going to try a PCI USB Adapter.
I'd hate to randomly get the one brand that works horribly with *nix.
This one is "Mac" ready which leads me to believe it'll work fine, but I've heard bad things about VIA chipsets.
http://www.tigerdirect.com/applications … &CatId=511
Thanks.

If you can order from Newegg, then consider this card with a NEC chipset:
http://www.newegg.com/Product/Product.a … -_-Product
Last edited by anonymous_user (2010-09-10 04:42:30)

Wireless broadcom pci mini adapter and thin client t620

Hi
I need toknow if part code 582564-001 will work in the thin client F5A54AT. Are there driver availalbe?
Thanks

I finally solved this problem by retrying the steps posted elsewhere in the community. I did NOT revert my o/s to Windows 8 and reinstall the upgrade to 8.1. I simply went into Device Manager and uninstalled the wireless adapter and its software. I then downloaded and installed the Realtek 8188CE Windows 8 driver from the Lenovo H520 drivers page. Finally, I followed the steps to update that driver, selecting the option to choose the driver myself. You should see a Microsoft driver and a Realtek driver - pick the Realtek driver and you should be good to go.

Does the Thunderbolt to Firewire adapter work on windows?

I'm planning on buying an Asus G55VW-DH71 gaming laptop, which has a thunderbolt port. I would like to be able to control my PreSonus digital audio mixer with it, and unfortunately, it only has a firewire for connecting to it. So, I would want to connect Apple's Thunderbolt to Firewire adapter into the laptop and the mixer's firewire cable.
Does the adapter work on windows 7/8?
Also - getting a macbook is out of the question.

I have pretty much the same need as you and purchased a HP laptop with Thunderbolt port and Windows 8. I also picked up the Apple Thunderbolt to Firewire adapter. I have been unable to get Windows to detect the Firewire side of the adapter. Windows 8 seems to pick up the Thunderbolt controller correctly and shows it as an extension of the PCI express bus.
I have found no set of drivers that I can add that will get the Firewire side to be recognized by Win8. Win 8 should have 1394b drivers native, so I don't know what the problem is. I wish I could get this to work, because I just don't have the option of getting a MacBook for the things I need to do.
Right now the only other Thunderbolt to Firewire option on the horizon seems to be the Belkin Thunderbolt Express Dock, but that has 2 problems.... 1, it is still in pre-order and 2, it is ~$300.
Mike

Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS

Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.

Hi,
    I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2053898239
Start time:                    2015-02-08 23:03:01
End time:                      2015-02-08 23:07:31
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS:        Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS:            Use the following information to resolve the error, and then try the setup process again.
Next step for RS:              Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine:       Use the following information to resolve the error, and then try the setup process again.
Next step for FullText:        Use the following information to resolve the error, and then try the setup process again.
Next step for Replication:     Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name:                  RLC_WORK
Machine processor count:       4
OS version:                    Future Windows Version
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered Configured
SQL Server 2012
Client Tools Connectivity                1033
11.2.5058.0     No         Yes
SQL Server 2012
Client Tools Backwards Compatibility     1033
11.2.5058.0     No         Yes
SQL Server 2012
Client Tools SDK                         1033
11.2.5058.0     No         Yes
SQL Server 2012
SQL Server Data Tools                    1033                 Express Edition
11.2.5058.0     No         Yes
SQL Server 2012
LocalDB                                  1033
Express Edition      11.0.2100.60    No         Yes
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
Installation location:         C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition:          Express
Slipstream:                    True
SP Level                       2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title:                         Service Pack 2
Knowledge Based Article:       KB 2958429
Version:                       11.2.5058.0
Architecture:                  x64
Language:                      1033
Update Source:                 Slipstream
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      true
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  MULTIDIMENSIONAL
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    true
ENU:                           true
ERRORREPORTING:                true
FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD:                 <empty>
HELP:                          false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SQLEXPRESS
INSTANCENAME:                  SQLEXPRESS
ISSVCACCOUNT:                  NT AUTHORITY\Network Service
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          AllFeatures_WithDefaults
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           RLC_WORK\Robert
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  true
TCPENABLED:                    0
UIMODE:                        AutoAdvance
UpdateEnabled:                 true
UpdateSource:                  Slipstream
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Reporting Services - Native
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Full-Text and Semantic Extractions for Search
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix

HP SERVER SCSI U320 PCI-E ADAPTER [412911-B21] windows 7 x64 driver?

Similar Messages

Maybe you are looking for