HPdv7 Phonecall regarding windows problems, op system Windows 7

I recievied a cann from some company claiming to be a part of the windows program telling me to check my program files, that in my email inbox, messages were coming from Facebook  that could be detrimental to my operating system.  They will first run a complete check on your whole computer including your hard drive and it will show you an astronomical amount of errors and telling you that you have a virus and your system will be wiped out.  They were not from this country, you ould tell that,  But if anyone encounters this problem.  Please report it.  they will fix it they said with a fee that they want at the time of retrieval..  It will show you what they are doing as it is being done to try to get you to buy in to it.  I haven't had a problem with anything on my system yet, so why am I getting these calls now?  Please Someone let me know.
Sincerely
Jon duche

First off I would have hung up and then placed e-mail as junk and blocked it.
Want to check your system, see what may be wrong go to:
http://pcpitstop.com/
run overdrive it will give you a total synopsis of your system and if an issues how to fix it...FREE
I have been using this web based check for years. No scam, no purchase of anything unless of course you want to , they have some great applications.
you will need to register but takes a minute....

Similar Messages

  • Weird problem with system

    I have a K8N platinum and i seem so be having some weird problems. A lot of the time it is having problems reading certain disks. for instance I once installed Rome total war on my system and it ran fine. i then had to reinstall windows due to some SP2 causing my system to go haywire when i reloaded windows got the latest driver and stuff  when i tried reload teh rome game it was telling that the files onteh disk might be corrupt as it was reading them correctly. after much chasing about with activision and installing  differnt drivers i finally got it working again  ( i think by dowlnloading the nforce drivers from MSI rather than Nvid) i Recently got a new 200 gig HD and decided to reinstall windows on that get a fresh copy of SP2 on disk(third attempt at loading that nighhtmare update every other time has caused sys probs)
    again im back to problems reading the cd same as before but getting the drivers from MSI this time hasnt helped as these were the first i tried.
    am currently using nforce 5.10 and getting nowhere
    any had or heard of anything similar?

    Why people call it MSI drivers is beyond my knowledge .
    5.03 is a NVIDIA driverpackage for NF3_CK8S with some drivers removed , 5.10 is a later NVIDIA driverpackage and unified for nf3 250 chipsets and backwards to nf2 .
    The IDE drivers is the same in both 5.03 and 5.10 so you get no difference regarding your problem altering between theese .
    5.03 has an older gart driver and doesn't include nv-audio drivers , rest is the same .
    If you have problems with CD , revert the controller to "Standard Dual Channel PCI IDE controller" for the PATA controller .
    Leave the SATA controller with "Nvidia nForce3 250 Serial ATA Controller (2.6) .
    Revert only the PATA controller which CDROMs use back to the microsoft standard ide one through device manager
    Ide ATA/ATAPI controllers -  Nvidia nForce3 Parallel ata controller - properties - driver-tab - Update driver - install from a list .. - don't search - choose :Standard Dual Channel PCI IDE controller -apply .
    Run the CDROM alone one one of the two ide ports as master . And harddisk(s) if you have any PATA HD's  on the other one .
    And don't use the cheapo red MSI ide cable . 

  • Problems with System Update 3.14.0019 after installation SP2

    Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
     After this upgrade I view  this error: "An error occurred while gathering user information."
    Thanks for the help

    A known issue.  It wasn't supposed to be supported until SP2 is RTM.  However, look at the stickied post in the forum for some bad news about SU.
    x61s

  • I am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    i am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    This is for Windows: http://support.apple.com/kb/TS1538

  • This is regarding upgrading problem

    Hi,
    This is regarding upgrading problem.
    I am Upgrading 4.7EE IDES to ECC 6.0 but I got the problem with Solman key
    When I given the Solmman key it shows illegal solman key. what is the problem ?
    system Id    -
    >   F06
    nstance number --->    30
    Hostname is -
    >      saibaba
    Thanks,
    Narshiha rao

    Hi,
    You genereate new solman key according to your system name and put that. This will work very well. Because when we create solman key then we have to define what is server name etc.
    Anil

  • ECC6 SR3 on fighting the problem of system patches

    ECC6 SR3 on fighting the problem of system patches
    My system is ECC6 SR3, and the installation of the system, PI-BASIS patch version number is the first 2005_1_70C months SAPKIPYJ7E How do I upgrade to the PI-BASIS this patch 2006_1_70C how the patch SAPKIPYM01 play ah?
    thanks

    You will need a delta package for this component to upgrade it to 2006_1_700
    Go to -> service.sap.com/swdc
             -> Installations and Upgrades
             -> Plug-Ins
             -> SAP Plug-In
             -> PI_BASIS
             -> PI_BASIS 2006_1_700
    The patches for 2006_1_700 you will find at similar path to above just replace "SAP Installations and Upgrades" with "SAP Support Packages". See [Note 1007796 - Installation/Upgrade Basis Plug-In (PI_BASIS) 2006.1|https://websmp106.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1007796&_NLANG=E] for further information.
    Regards,
    Nelis

  • General Inquiry Regarding Error Handling with System Exec.vi

    I have a sub vi that uses the System Exec.vi to send SMS messages when triggered. I am confused as to how the error handling works and why all of the errors seem to go to the "standard error" vs the "Error out". The reason I am interested is because I am trying to interrupt the error out of another script to execute a command if error=true.
    I have intentionally created an error to test this, however it does not seem that the signal is ever being sent to the error out, only to the standard error.
    Any help/explanation as to how this works would be greatly appreciated.

    The Facebook discussion board is just a pilot and that functionality is not available yet (as to my knowledge). You will have to use the actual forum thread to add attachments. You can click the arrow just to the right of thread topic in the Facebook thread and that will take you to the ni.com/forums thread. Or you can navigate here:
    http://forums.ni.com/t5/LabVIEW/General-Inquiry-Regarding-Error-Handling-with-System-Exec-vi/m-p/246...
    Having a look at your VI would help to clarify the error handling issue.
    Daniel K | NI Applications Engineer | Certified LabVIEW Developer

  • When installed JDK but I have problem with System vars may install bundle

    When installed JDK but I have problem with System vars may install bundle [netbeans&JDK] WITHOUT UNISTALLING initial JDK or needed uninstall first ?

    With the word 'automatically', yes you do need pulseaudio. I'm sure you could cook up some udev or related rule to do that in Alsa, but pulseaudio would be easier.

  • I have a problem, from system test says:  Error 4mem/61/400000000:0x8444fb98, I know how you can solve. Thanks

    I have a problem, from system test says:  Error 4mem/61/400000000:0x8444fb98, I know how you can solve.

    If you have Apple Care for that computer, give them a call: Apple's Customer Support - in the US, (800) 767-2775
    If you're not sure how to handle the situation, consider walking your MB into the nearest Apple Store and asking someone there to take a look, etc.
    Good luck in any case.

  • Regarding addon problem

    hi, 
         i create one addon for process external bank reconsilation we import  external bank statement to execl file it working fine  from last six month  but today  we import file it shows  an error <b>internal error(2147467259) occured (131-183)
    the specified resource name cannot be found in the image file</b> .its very urgent pls give solution as early as possible.
    regrads,
    vishal

    Hi Vishal,
    I am sorry, but I have no clue what your problem might be, but:
    a) you should give your message a meaningful subject - "regarding addon problem" doesn't say anything!
    b) I suggest that you might rather ask B1 application-related questions in the "SAP Business One" forum; I hope that you can get the right advice easier there.
    HTH,
    Frank

  • I having a problem in system preferences

    i am facing a problem my system preference is not working and my system goes slower day by day what should do

    You can read this
    Why is my computer slow?
    Step by Step to fix your Mac

  • I have a Shockwave Error: "This Shockwave movie has errors that have caused playback problems.  Please contact the author of this content regarding this problem.   Shockwave is unable to continue."  What I can make ?

    I have a Shockwave Error: "This Shockwave movie has errors that have caused playback problems.  Please contact the author of this content regarding this problem.   Shockwave is unable to continue."  What I can make ?

    This is some built-in "protection" that was engineered into Shockwave some years ago. It means that SW will ignore the first 10 script errors then throw the dialogue you are seeing. You really will have to contact the developer of the content in question to have it fixed - there's nothing anyone else can do. The developer needs to replicate your error, determine the cause, rectify it and republish their movie

  • Trying to create an account on eprintcenter but it gives me an error regarding server problem

    I am trying to create an account on eprintcenter since one month but it gives me an error regarding server problem
    "Lo lamentamos. ¡Se acaba de producir un problema en nuestro servidor! Hemos registrado el problema y lo corregiremos en cuanto sea posible. Disculpe la molestia."
    "Sorry. There is problem on our server. He have registered the problem and solve as soon as possible. Sorry for the inconvinience"
    How can I use eprint service without a user?

    What browser are you using to access the site? I would start by trying to access the site from another browser. If that is not an option, I would clear the viewing history, cookies and cache for that browser under the settings. Then I would reboot the computer too. I hope that this helps.
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • My credit card  has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I cal

    My credit card  has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I call?

    Would be problems with purchases, billing, and redemption option.  It's not 100% exact to your issue, but it will get you to the right department.
    Go here https://expresslane.apple.com/GetproductgroupList.do then select ITunes, then Store, then Purchases, Billing, and Redemption.  Then.. probably pick "My topic is not listed." 

  • Backblaze problem made System Prefs hang in Maverick

    I am on a Macbook Pro, OS 10.9.1 . I use Backblaze for offsite backups.
    I noticed this morning that the Backblaze icon was missing from my main system menu bar, so I went to Spotlight, searched "backblaze," and clicked on what came up. The system began to simultaneously open both a Backblaze app and my System Preferences. Then both hung and became unresponsive, so I had to force quit both of them.
    Now the Backblaze icon is back in the system menu bar, but nothing happens when I click it--no menu drops down, etc. Also, I can no longer open System Preferences -- when I choose it in the Apple menu, it bounces for a while, then hangs, and I have to force quit.
    I've tried fixing permissions, which didn't help. Anyone have any thoughts? I've also written Backblaze but haven't heard from them yet, and I suspect they will say that a problem with System Prefs is a Mac problem, not theirs.

    seems to have fixed itself after a couple of days.

Maybe you are looking for