HR assignment to Work center

Hi All,
I am having few queries with the above subject.
My customer is asking that he will assign persons(from HR) to the work centers. and based on the assignments done he want some functionality like
1. At the time of operation confirmation through CO11N in the person field only assigned persons(in Work center) should be available
2. At the time of capacity availability check system should check the person attached to work center only. e. g. suppose two persons for 8 hrs are assigned to work center then if order need 18 labor hours, in this case system should tell that capacity is not available. and then if third person added to Work center master then it will tell capacity is available.
Now my question is :
Whether above requirements are possible? if yes then please please tell me how to do?\
Millions of thanks in advance.

Hi Jigar B patel,
Well Work center is the main integration part for both PP and HR OK.
As your requirement is to maintain the responsible person for the work center follow the path:
1) SPRO -
> PRODUCTION -
> BASIC DATA -
> WORK CENTER -
> GENERAL DATA -
> DETERMINE PERSON
    RESPONSIBLE.
2) GO TO THE PARTICULAR WORK CENTER YOU ARE USING THROUGH T-CODE CR02 OR CR03 OK.
    THEN GO TO THE TAB CAPACITIES TAB DOWN THERE ARE PUSH BUTTONS THE VERY FIRST ONE IS CAPACITY BUTTON
    PRESS IT -
> YOU WILL GO TO CAPACITY HEADER SCREEN -
> ON THE TOP YOU CAN FIND PUSH BUTTON CALLED
    AVAILABLE CAPACITY PROFILE -
> ON THE TOP OF THE YOU CAN SEE A GRAPHIC PRESS IT THERE YOU CAN GET AN
    IDEA OK.
   I hope it helps you.
Regards,
Madhu.G

Similar Messages

URGENT........ACTIVITY TYPE AND THEIR ASSIGNEMENT TO WORK CENTER!!!!!!!!!!!

Hi Friends,
I have A REAL URGENT REQUIREMENT as far as activity type and assignment to Work Center is concerned.
I work for a client who is a manufacturer of Paint equipment. I'm responsible for capturing the cost of an assembly activity of spray guns, which is the last step of routing. However, there are 4 processes/steps of routing which are outsourced to the subcontracting vendors. we recieve the facbricated, anodised guns which are assembled in our factory.
I need to get the cost of assembly, which I have created as an actvity type in KL01 and planned for the same using KP26. However the system is throwing up errors related to costing, and I'm not sure about the assignment areas in work center.
And above all I'm not sure of various fields in KP26 like capacity field and what do we assign.
can anybody help me with the series of steps for me to be able to pick up the cost. or if there is any sort of material in this regards, plz mail it to: __ email removed by moderator
regards
sandhya

Hi,
You need to do the following:
1) Create an Activity type for the Assembly activity.
2) Define a Work Centre in PP (T-Code CR01) which represents the location where the Assembly is carried out.
3) Define a Cost Centre corresponding to the above Work Centre.
4) Plan for the Activity quantity for the combination of the Cost Centre and Activity type (KP26)
5) Plan for the Overhead Costs which are incurred on this Cost Centre which need to be included in the Standard cost of the Assembly.(KP06)
6) Assign the Cost centre & Acivity type to the Work Centre in CR02.(This is possible only after you do 5 above)
7) Execute the Plan price calculation (T-code KSPI)
After you do all of the above, when you do the Costing Run, all the relevant costs will be picked.
Ofcourse all the relevant master data for PP like BOM, Routing with the relevant assignments of materials to operations, etc should be in place.
Regards,
Assign points if useful

How to use Assignment Enforcement(Work Center Maintenance)

I thought that I was not able to start SFC in the work center which Assignment Enforcement is set in Enforced.
However, SFC was able to be begun and to be completed by using POD in the following situations.
Is the mistake found in my way to use Assignment Enforcement?
Product A can use just resource RSC01 in operation PR001.
Resource RSC01 is assigned to work center WC001.
I set Assignment Enforcement in Enforced.
And No user assign to work center WC001.
I start SFC at operation PR001 and resource RSC01.

Yousuke,
Let me quote the guru of ME first:
"The Assignment Enforcement option only applies to the actual assignments made in SWA (Rich Supervisor Work Assignment). If any assignments were made in SWA, then those will be enforced as defined by this rule. There is still one validation that is performed no matter how this option is set: The operator must still be in the W/C to perform the work in the Rich POD. We donu2019t want users from WC1 working in WC2, ever. That is why we always make this validation, even if the rule is set to None."
So, in case you use Rich POD, SWA and Assignment Enforcement option, then you should see the error message caused by Assignment Enforcement.
Regards,
Sergiy

HR Assignment in Work Center

Hi,
We can assign the person in work center via HR assignment under capacity planning tab & it works for work force planning. But before going to capacity tab , we have one more tab for HR Assignment. Can you suggest what difference it will make if we assign the person under this tab.
Thanks...
Ashok Sangal

Its grouping the person in Organisational units w.r.t HRMS. Both will appera during work force planning under different groupings.
Regards
soundar

Cost Center assignment to Work Center(CRCO)

Hi Experts,
I was updating Costing data to Work center. I used standard LSMW 0260, 0000, RCRAPDX2, D., but i am getting error as 'Work Center already exists' since i am updating Costing seperately after loading Work Center.
Please help me in updating this data with any standard program available. Otherthan prefering recording method of LSMW or BDC.
Thanks,
Maruthi Prasad

Hi all,
Iam really waiting for someone to see and get the logic right for this code.Iam completely stuck up. i need ur help
Thanks

How to find cost center assigned to a work center

Hi Guys,
I need to find cost center assigned to work center.
from Which table I should to get it.
Cheers
S Kumar

Hi,
Please use the table CRHD to get the object ids and then go to the table CRCO with the object ids and get the Cost center assignment to resources.or you an create a query by SQVI and use it.
regards,
kaushik

Work center assignment HR - PS

Hi everyone
is there anything else to do to assign work center in HR except what I've already accomplished:
1. work centers have been created in CR01and customized in OP42
2. via T-Code PO01 I assigned a work center to a position (connection A!003).
What else should be done? How can I see the work center in organizational plan (PPOSE) besides Detailed description of an object???
Will PS team-members be able to observe my work center from HR in their T-Codes???
Best regards,
Eldar

HI,
you cannot see ur work center directly in the Org.Structure.Please use this report RHXSTR06 which will give the existing work centers that are assigned to ur Organization Unit.
Thanks and Regards
Swati

Automatic assignment of Main Work Center in WO's

Hi gurus,
We massively uploaded PM plans and launched the WO's.
Per default the system assigned the Work Center at Equipment level. Any idea how to change this setting?
Thanks,
VL

Hi VL,
In ECC 6.0 tcode IW38. execute tcode as per your required input parameter and get out put.
For output at top go to Order>>>>Mass Change.
There you will get option to change maintenance work center for all order.

Work center in sap hcm

Hi,
Could any one tell me how to link workcenter in saphcm please.
Is workcenter created by hcm or any other consultant and how and where to link in master data
Chandu
Edited by: chandu77 on Jan 12, 2012 1:55 PM

Hi,
We use the TCode PO01 to Maintain the Work Centers.
We will be assigning the Work Center (A) either to Positon or to the Company directly.
If the Workcenter is assigned to companly, ther employees under that company will also inherit the same work center
Or
We can assign the Work Center to individual employee
For Example
Work Center may be A3F2QWS20
A - Building A
3F - 3rd Floor
2Q - 2nd Quardrent
WS20 - Work Station 20
Hope you got cleared
Have a good day...!
KK

Wrong Work center picking up Time sheet

Hi
Scenario is as follows:
Earlier Employee has HR assignment to one Work center 1 -WC1
Later, Employee was Assigned to Work center 2- WC2
Problem: When booking time sheet in CAT2 , for service order, WC1 was picking up, even though in Service order WC2 is assigned.
We have deleted the Employee HR assignment from WC1 , but still in Time sheet WC1 is coming.
Please suggest.
Thanks.

Is it possible for anyone to tell, from where the work center is being picked up in CAT2. We are processing time sheet booking for service order. The work center in service order is something different than what is picked up in CAT2.

PP-PM Integration (Work Center)

Hi all,
In my client place, they have 10 similar Production machines with equal capacities and perform same function.
So, as per the availability of any of those machines, production people will load the machine against Production Order. To do this, they have created only ONE workcenter with 10 Individual Capacities.
So, they have assigned that Work Center in the Routing and as per the availability of 10 individual Capacities, they can confirm and dispatch the P.O.
If we consider PM, 10 different Equipment nos have to be generated with the same work center. So if I block any of those 10 Equipments, that work center will get blocked and they can not dispatch the PO.
Please guide and give your inputs to how to proceed in this scenario.
Thnx in advance
Sam

hi,
u r correct. I am also looking for a rectification only.
In case of Process industry, this std scenario will work , as if any one of the machine gets stopped, all other machine can not run.
to put in a simple way, if output of one machine is the input of next machine, then we can accomodate ONE workcenter for all the machines in that chain/assembly/line.
in my case the requirement is, none of the machines' output is linked with others input.
If anybody could find any user exits/Badi or any other solution, please give ur valuable points.
Sam

Combine Work Center Link Groups in one Work Center

Hello Experts,
our requirement is to combine the Work Center Link Groups of several Work Centers into one Custom Work Center.
For example, the work centers Knowledge Management and Managing Operations. (IC-MGRKM, IC-MGRMA)
They have Work Center Link Groups like IC-MGMA-CR or IC-MGKM-CR. Now we defined an own work center Y-IC-MGRMA and assigned these links groups (and others) to the Work Center.
However, when we open the Work Center we only ever see links of one work center type (for example only the links of Knowledge Management).
Is it even possible to combine the different work centers into one big work center with many links? What would we have to do to achieve this?
Help would be appreciated!

If I am not wrong you are assigning standard work Center Link Groups like IC-MGMA-CR & IC-MGKM-CR to newly created Work center Y-IC-MGRMA .If I try the same, all related links can be made visible. The process you are following is correct.
You may have confused with the nomenclature of your work center ID - Y-IC-MGRM. Please look into the "Group ID" column, if you are assigning standard group links as mentioned above you will find three logical link ID for Knowledge management & two for MGMA too. In short if five logical links are available in second level navigation then things are correct at you end. I tried it and its working fine.
Pease check.
Thanks & regards,
Amit

Work Center Mapping

Hi Guru's,
Need help in mapping the work centers in routings,
There are 2 operations for the material, but there are 5 machines for operation 1 and 6 machines for operation2
they do not know on which machine they are going to run production, please guide how can I define the routings.
Thanks
Satya

Hi
You can map this scenario like this.
Create the work center which you going to use in operation 1which has 5 machines, while creating the work center double click on the machine Capacity category then top menu path Select Go to --> Individual capacities. Here you can assign the 5 machines as individual capacities. The same way you can create for operation 2 also.
Once you complete this after creation of production order go to CM27 t .code to do the capacity planning and split/allocating the work to the individual capacities. So that you can select the machine which you want select in that way.
I think this will help for you.
Prerequisites for this scenario.
1. Create the individual capacities using CR11 or if the PM module implemented in your project get the capacity no from them and assign in work center.
2. While running MRP use lead time scheduling for capacity planning.
Thanks
S.Murali

PP Work Center.

What is significance of assigning PP Work center in the equipment and functional location master data ?
Is their any report or analysis based on this ?
Regards,
VM

Hi Vijay,
The main integration between PM & PP is Workcenter. The production workcenter is created as Equipment in the PM module .
The equipment master accomodates two work centers. The Main (maintenance) workcenter and the production workcenter.
The maintenance workcenter is maintained in the location tab, location data screen area. The production center is maintained in the organization tab, Responsibilities screen area..
Eg for Maintenance Workcenter : Fitter , Electrician
Eg for Production Workcenter : Lathe , Conveyor
If there is a maintenance to be performed on the equipment it means that the production workcenter's capacity is not available.
Regards,
Santhosh

PP work center capacity and link in Equipment master

Dear All
My client has five equipments which he is clubing them into one work center with five capacities. In equipment master i have given for respective equipments i have given PP work center locations but when i create a maint order for one equip then in planning the capacity avalability is affecting the entire work center for ex if the total work on one equip is 12 hrs then only 8 hrs of capcity should be deducted for to day and 4 hrs for tommorow but in plannig all 12 hrs are getting deducted in todays capacity itself.
Pls give some inputs from your experiances
Thanks and Regards
Pankaj

Hi,
Even if we have more than One Equipments in the same work center, PP-PM integration will work.
This is the standard scenario in any Process Industry or in case of an Assembly line of a Automobile manufacturing industry.
So it should work. Please check the following points again,
1. Assignment of Work Center to Equipment Master
2. System Condition - '0' Not in Operation in Both header as well as against Individual Operations (in Work Order for that Equipment)
3. Work Order has been released.
4. Same Work Center is used in Routing and the same is Planned for a period.
If we have all the above points right, then while dispatching the Production Order system should show the Period of block and should shift/plan the PO accordingly.
Regards
Sam

HR assignment to Work center

Similar Messages

Maybe you are looking for