HR-How to use dynamic selection fields in prog ..?

Hii
I have written a prog to select data pertaining to details of all employees who belong to a particular country . For this i have provided a dynamic selection field for selecting country (through Selection View).But when i am getting all the records for all countries.
How to use the dynamic selection fields in program or they behave in the same way as the standard selection given by the LDB .As if we enter a value in the std screen then the GET event acts accordingly .
Ajitabh Pradhan

Hi Ajitabh,
First off, is the Dynamic Selection working? If so, try the following code.. I am assuming, you only want to look at Permanent Address.
tables: pernr.
infotypes: 0001,0006.
start-of-selection.
get pernr.
rp-provide-from-last p0001 space pn-begda pn-endda.
check pnp-sw-found eq 1.
rp-provide-from-last p0006 1 pn-begda pn-endda.
check pnp-sw-found eq 1.
write:/ pernr-pernr,p0001-ename,p0006-land1.
end-of-selection.
Regards,
Suresh Datti

Similar Messages

How to use dynamic select query which queries from 3 different table.

Hi All,
I am new to Toplink, i would like to use a named query to select some of the columns from 3 different tables with dynamic where clause.
I have used the following lines. Please tell me how to get code for the dynamic where clause.
First try :
Vector objPersons = (Vector)session.executeQuery("findPersonByGlobalID",Person.class,vQueryArguments);
The above method is not returning the vector or collection.
Second Try:
ReadAllQuery query = new ReadAllQuery(Person.class);
query.useCollectionClass(LinkedList.class);
LinkedList person = (LinkedList) session.executeQuery(query);
The second try is returning the collection but, this fetches all the record from the table.
1. How to query for range of records?
2. How to query from multiple tables for some range. How to use dynamic range values ?
Please reply with your answers or some pointers would help.
Thanks and Regards,
Vijay.B

Hi,
Did you try using a SQLCall ? It might be able to satisfy you requirements .. :-
Employee employee = (Employee) session.executeSelectingCall(
new SQLCall("SELECT * FROM EMPLOYEE WHERE EMP_ID = 44")
);You can get more information here :-
http://www.oracle.com/technology/products/ias/toplink/doc/1013/MAIN/_html/qrybas004.htm
Regards,
Sandeep

How to hide dynamic selection fields in variants

hi,
When a selection variant is saved, we have the option to 'hide' a selection field. That field may contain a value, but it is not shown on the selection screen. There is, however, a button that will display these hidden field when required.
Is it possible to do this also with dynamic selection fields ?
The column 'Hide field' is shown in the variant atttributes screen, but it is not active.
Please suggest
MS

Explore SHD0 T code

How to use dynamic selection screen inputs in main program

hi all,
its a report where in it calls one dynamic selection screen( user need to enter the parameters here) after that i need to use those inputs for some check, can any buddy help how to use/ get that input parameters into main program.
regards,
vara..

Hi,
i think u have created that dynamic selection screen in seperate program and calling to ur main program.instead of that u just create that synamic selection screen program as include program and include it in ur main program.
or u need to use set/get parameter id concept.
rgds,
bharat.

How to use dynamic column fields in formulas

Hi,
we changed from CR 8.5 to CR XI R2.
Many of our reports use dynamic queries with different count of columns.
These reports are designed for the maximum count of columns.
This works fine with CR 8.5 but with CR XI R2 it seems to be that if one of these columns is missing i get an error in all formulas using this missing columns.
How can i use or check this columns in formulas?
regards
Michael

Could it be because of null values? Try File -> Report Options and then check the box next to convert null values to default values and see it that helps or you can go into the formulae and choose Default Values for Nulls. Either of these options should plug a zero if the values happen to be nulls.

How to use a select field as a tooltip in a report

Dear,
i have a customize report based on the statement below
SELECT '#WORKSPACE_IMAGES#folder.GIF' icon , lower(a.application)label,(a.appli_acronym) acronym,(ap.app_server)host
FROM app_users ap, applications a
where a.appli_user= ap.app_user
and ap.app_server=:P31_LABELVALUE
and upper(a.application) like DECODE (:P31_SEARCH, NULL,'%', UPPER ('%' || :P31_SEARCH || '%'))
order by labelHow can i use the second field (a.appli_acronym) as tooltip in my report?
Thx in advance.
Celio

Hi in fact is already use a customize template for my report
CSS in html header
<style type="text/css">
ul.icon-list {
margin: 0;
padding: 0;
list-style: none;
ul.icon-list li {
display: inline-block;
margin: 0;
padding: 0;
width: &P31_LABEL_WIDTH.em;
ul.icon-list li a img {
vertical-align: middle;
</style>

Icon List template for the report
in the span balise i have (onmouseover="ToolTip('#TOOLTIP#');">#LABEL#), not appears in the balise 'code'
<li class="dd">
<a href="#DERIVED$01#">
    <img src="#ICON#" alt="#LABEL#" />
    <span onmouseover="ToolTip('#TOOLTIP#');">#LABEL#</span>
</a>
</li>
<ul class="icon-list">
</ul>
<table>#PAGINATION#</table>I test the following javascript :
function ToolTip(texte) {
toolTip_enable(texte,this,texte);
}When the mouse is over the field i get well the tooltip value i'd like to have but it appears in the bottom of the page always in the same area.
could someone give me more info about 'toolTip_enable' function?
Thx in advance.
Celio
Edited by: Celio on 10-Feb-2011 04:00
Edited by: Celio on 10-Feb-2011 04:01
Edited by: Celio on 10-Feb-2011 04:03
Edited by: Celio on 10-Feb-2011 04:04

How to skip authorisation for infotype when using dynamic selection ?

Hi folks,
I have a problem here.
When im using dynamic selection screen, i cannot skip authorisation for subtypes of an infotype. Eg. if my record for 0185 have records that do not have authorisation for the subtypes. Dynamic selection will filter away this record and will not get me into the Get Peras as id i use to run has authorisation configured. IT will skip out of Get Peras.
However, if im not using dynamic selection screen, i will use the normal pnpce fields, i will be able to get the record, as i do my authorisation check using function module in the get peras, and i did not declare 0185 in the infotypes.
May i know if there is any solution to this problem as dynamic selection screen is a standard...
Thanks,
lihui

hi,
however i cannot skip authorisation for the whole pernr as i need the authorisations for the processing reports.
Currently the case is like this..
i have a authorisations for infotype 0185. i have 2 subtypes records such as ZA and ZB. the user does not have authorisation to read ZB but has authorisation to read ZA.
However, when use dynamic selection, it will skip out the pernr.
If the pernr 0185 records has only ZA subtype but no ZB subtype, it will not skip this pernr when using dynamic selection.
Anymore idea how to overcome this?

How to pass dynamic selection to logical databse using ldb_process function

dear friends,
can anybode tell me how to pass dynamic selection to the logical database when i m using LDB_PROCESS function module. however, in EXPRESSIONS paramter of the function module i m passing the selecti-option, it is passing their also but when i used more than two select-option or paramter it throw an exception FREE_SELECTIONS_ERROR.
SO PLEASE GUIDE ME HOW TO PASS MORE THAN TWO SELECT-OPTION IN LOGICAL DATANSE DYNAMICALLY USING LDB_PROCESS.

would be nice if you post the answer to all

HR - dynamic selections field name and field value in the program

HI all,
I am using dynamic selections for a HR report.
I have created a view with 20 fields and added it to HR report category ___00003(All fields suppressed).
I need to check these fields in the program. But i am not able to get the field name and value in the program for dynamic selections fields.
Please let me know how to get the field names and values in the program for dynamic selections .
Thanks,
Kranthi.

You have to read the itab <i>pnpdynse</i> in your Program to obtain the Dynamic Selection values. This itab has a deep structure.. you can set a break point in one of the events before <b>get pernr</b> & in the debug mode, you will able to display the itab <i>pnpdynse</i>.. you can then identify how to get the values into your code..
~Suresh

How to use dynamic parameter when a report is created using Stored Procedures

Hi all,
any one have the idea of how to use dynamic parameter in crystal report XI R2
when report is created using Stored Procedure.
Regards
shashi kant chauhan

Hi
You can create an SQL command in Database Expert > Expand your datasource > Add command
Then enter the SQL query that will create the list of values to supply to the user
eg select field1,field2 from table
Then edit the parameter of the report. These will be the SP parameters adn can be seen in field explorer.
Change the parameter type to Dynamic
Under the word Value click on Click here to add item
Scroll down to your Command and select one of the values that you want to appear in the list
e.g field1
Then click on the Parameters field - this is essential to create the param
You can edit other options as required
That should do it for you.
I must say that i use CR 2008 connected to Oracle 10g SP, but i reckon this will work for SQL DB and CR XI as well
Best of luck

How to get multiple selected fields in list

Hello all,
I am trying to get multiple selected value from a list but i dont know how to get multiple selected fields from a list though AS3.
Actually i want to pass the selected fields to php, so for that i need to get the selections and send to php.
Thankx..

i want to put the selected fields of list in an array through AS3....
actually......i figured it out how to do that...........
Its simple......use
list.selectedItems[index]
and to get the number of items selected......
list.selectedItems.length
simple.....

Is it possible to display only dynamically selected fields in the out put?

Is it possible to display only dynamically selected fields in the out put? i need to display set of columns in the selection criteria, but in the output i have display only input given fields. because i need to convert it into .csv file. So i have to display selected fields from internal table. In oracle they are using"execute immediate". is there any equivalent in SAP?
thanks in advance.

Hi Remya,
Are you talking about dynamic programming in ABAP ?
If yes, there are concepts like RTTS which facilitates it.
Yes, the select query also supports dynamic selection of fields. ( Please care about ( ) in dynamic sql ).
Do more research on Field Symbols and statements like ASSIGN COMPONENT OF.
Regards,
Philip.

Script logic - how to use a selection variable within an allocation logic

Hi,
I want to implement a simple top-down distribution to distribute values from a yearly budget (Y20xx.TOTAL) to a quarter budget (Q20xx.Q1, ... Q20xx.Q4) using the actuals of the previous year as reference.
If we hard code the members it works fine:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN); USING=<<<; TOTAL=<<<
*DIM TIME WHAT=Y2009.TOTAL; WHERE=BAS(Q2009.TOTAL); USING=BAS(Q2008.TOTAL); TOTAL=<<<
*DIM CATEGORY WHAT=SBO; WHERE=<<<; USING=ACTUAL; TOTAL=<<<
*ENDALLOCATION
Of course, we want to make this dynamic, using the values inputted in the selection screen of the package: time, entity and category.
So if we start with write the following logic, it does not work anymore:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN); USING=<<<; TOTAL=<<<
*DIM TIME WHAT=%TIME_DIM%; WHERE=BAS(Q2009.TOTAL); USING=BAS(Q2008.TOTAL); TOTAL=<<<
*DIM CATEGORY WHAT=%CATEGORY_DIM%; WHERE=<<<; USING=ACTUAL; TOTAL=<<<
*ENDALLOCATION
So, how to use the selection variables in this allocation logic? %TIME%, %CATEGORY% also did not work ...
regards
Dries
solved it ...
Edited by: Dries Paesmans on Feb 22, 2009 8:31 PM

Hi Dries,
Looks like you solved this, but if I can just add a small point -- when you use syntax like this:
*DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN);
*DIM TIME WHAT=Y2009.TOTAL; WHERE=BAS(Q2009.TOTAL);
each time the logic runs, it will scan through the dimension from the FIN and Q2009.TOTAL members, one level at a time, until it reaches the base members (where calc = 'n'). This may happen very quickly, if the dimension has very few levels, but could take a bit of extra time if it's a particularly deep dimension. (By which I mean many levels of hierarchy -- not some 1970's Pink Floyd musical reference.)
You may speed things up by using a member property instead of the BAS(xyz). Flag all the base members using a specific property value, and that way the logic engine can pick up the complete list of members in the WHERE clause, in a single query.
*DIM Account What=ACC_NOT_ASSIGNED; Where=[FloydProperty]="DarkSideOfTheMoon"; ...
This adds some maitenance work in the dimension, which may be problematic if your admins are changing it regularly (and will cause problems if they forget to update this particular property).
I can't predict how much time this will save you (maybe not much at all), but anyway I figure you'd want to know exactly what work you're asking the system to perform.
Regards,
Tim

How To Document: Dynamic selection for InfoSpoke

Hello
I have downloaded and read the "How To" document: Dynamic selection for InfoSpoke & Use InfoSpoke Badi to correct KYF format
link: https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/01d3a090-0201-0010-9783-bc33ab690e70&overridelayout=true
I'm mostly interested for the dynamic selection part of the document and the code for that seems to be stored in an attached text document (ZLX_ESS_INTERFACE.txt). The problem is that i cannot actually view it or any other txt in the pdf.
Can anyone who has got the txt file link it here please or suggest a program that would dynamicaly change the infospoke selections?
Actualy i'm not interested in having an input screen for filling the variable value, i just want to get the value from an ODS
any suggestions?
Thanx in advance
Fragi

Hello
I have downloaded and read the "How To" document: Dynamic selection for InfoSpoke & Use InfoSpoke Badi to correct KYF format
link: https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/01d3a090-0201-0010-9783-bc33ab690e70&overridelayout=true
I'm mostly interested for the dynamic selection part of the document and the code for that seems to be stored in an attached text document (ZLX_ESS_INTERFACE.txt). The problem is that i cannot actually view it or any other txt in the pdf.
Can anyone who has got the txt file link it here please or suggest a program that would dynamicaly change the infospoke selections?
Actualy i'm not interested in having an input screen for filling the variable value, i just want to get the value from an ODS
any suggestions?
Thanx in advance
Fragi

Dynamic selection field display

Hi
Can we display field values for a field from Dynamic selection ?

Hi,
Yes, you can display field values in dynamic selection field.
If I understood your question correctly, you are talking about the dynamic selection used in reports ( For eg. ME2N). The field which are appearing in dynamic selection shows the field values. ( you can press F4 and check the field values).
Rajesh.

HR-How to use dynamic selection fields in prog ..?

Similar Messages

Maybe you are looking for