HR_MAINTAIN_MASTERDATA Multiple Address is not getting updated
Hi All,
I am using HR_MAINTAIN_MASTERDATA for creating employee it's working fine but i am not able to handle multiple sub type.
For example sub type for Address it's having multiple values 1 Permamant address 2 Office address 3 Emergency Address.
Anybody know how to handle such multiple sub type in function module. How to provide values to sub type.
What id the significance of SEQNR?
Thanks in advance.
Hi Dilek Ersoz Adak ,
In my case address type 2 and 3 is mendatory. So it want allow me to proceed furthur without maintianing Address 2 and 3.
Please suggest something.
Thanks,
RP
Similar Messages
-
HR_MAINTAIN_MASTERDATA Multiple Address is not getting generated
Hi All,
I am using HR_MAINTAIN_MASTERDATA for creating employee it's working fine but i am not able to handle multiple sub type.
For example sub type for Address it's having multiple values 1 Permamant address 2 Office address 3 Emergency Address.
Anybody know how to handle such multiple sub type in function module. How to provide values to sub type.
What id the significance of SEQNR?
Thanks in advance.
RPHi,
while you pass your internal table(PROPOSED_VALUES) in FM,
pass these values--
WA-fname = 'P0006-ANSSA'. "( ADDRESS TYPE)
WA-fval = '1'. "1"- PRESENT RESIDENCE"
"2"- PERMANENT RESIDENCE"
"3"- EMERGENCY RESIDENCE
APPEND WA TO ITAB.
Then pass it to FM.
Regards,
Sumit -
Master Data is not Getting Updated Properly.
Dear Expert,
I am trying to pull the data by Info package but The text is not getting updated.
The Master data object is 0BPARTNER . To update this Master data , we ghave 2 info packages
0BPARTNER_ATTR and 0BPARTNER_TEXT. But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
What could be the Reason for this and How can I solve this issue ?
Tahnks,
UtpalHi,
Could you please check the data in RSA3.
If everything is there in R/3 side.Then,please check are you giving any
condition in the infopackage .
Please run the infopackage without giving any condition.
Thanks,
Saveen Kumar -
Data is not getting updated in CRM
HI experts,
I am updating the new address and postal codes in ISU.And now if I check these address for buisness partner in CRM. Its not getting updated.
why this is happening?
Is there any BDOC used in this case then how we can check that BDOC?
Thanks,
JassiHello
I am sure that the problem occurs due to this.
You need to know the error message. To do this:
1) Choose any red document from transaction SMW01
2) Click on button "Show BDoc message errors/receivers" (9th button from the left)
3) In the opening window there is a button "Errors". There is where you can find the error message.
I hope it helps. Please, provide points if helpful.
Joaquin -
PO Vendor Email ID is not getting updated in PO Output Tab
Hello Experts,
We are facing any issue with the PO vendor email id.
Scenario: While creating the PO, we are mapping the vendor address (Like, Email, phone no, fax no .)From shopping cart which are custom fields of shopping cart.
And these address details getting flowing to PO while creating PO.
And we can see the updated address in partner details for the vendor.
But the issue is coming as, this email id and fax no has get update in the PO Output tab also. This is not working for only email id, where as fax no id getting updated in the PO Output tab.
Can you please check this and provide us a solution for this issue. Why only the email is not getting updated.
I noticed that, there is FM module which gets address details of the vendor BBP_OUTPUT_PO_PARAMS_GET from the memory which is not getting the correct details
Seeking your help.
We will appreciate if somebody can provide us solution for this issue.
Thank you,
Bharathi.
Edited by: Latha V on Feb 11, 2009 10:01 AMHi check follwoing
1. Set Delivery complete indicator at plant leve
spro - mm --inventory mgmt ---Goods receipt --- Set delivery complete indicator
2. Control field selection for MIGO to disable users from changing it.
spro -- Materials Mgmt -->Inventory Mgmt -- Settings for enjoy Transaction -->Field Selection for MIGO
and chek this link
["Delivery Completed" Indicator
Regards
Kailas Ugale -
Delta Records is not getting updated in delta queus when changes done
Hi All,
In Quality system , when a user makes a change to an order's ship-to address, the changes are "triggering" a delta record into the delta tables for BI to extract. This can be seen via tcode rsa3's delta tester.
In Productionn System, when the user makes the exact same change, nothing is added to the delta table and the changes never come over to BI unless a full extract is request for the order.
Why changes not getting updated, please give your inputs.
Thanks & Regards,
Venkat Vanarasi.Do you have your V3 update job active and running? THis job wites changes to the delta queue. Of course your datasource has to been initialized and a delta queue should be setup. You can check it in RSA7.
Regards,
Juergen -
HIREDATE & FIREDATE of Employee are not getting updated in t-code PA20.
Hi all,
HIRE DATE & FIRE DATE are not getting updated whenever the data of an employee loaded into SAP T-Code PA20 .
And even the input data contains the both the fields HIRE DATE & FIRE DATE
Can any one please suggest us why its happening.
Thanks,
Lava.Hi Girishkg,
The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
The limit can be set in web application’s web.config file or in IIS .
There are two detailed articles about setting the limit:
http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support -
544 Movement ,Qty & value is not getting updated in MC.9
Dear friends,
MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting G in OMJJ.
I require the info about MC.9 configuration or any info related to this.Hi,
Please refer SAP note 581240 for this.
For these stocks you have three valuation types for selection:
' ' = no inventory valuation
'A' valuation = without reference to sales document ('make-to-stock
inventory')
'M' = separate valuation with reference to the sales and distribution
document/project
ONLY stock/stock movements with special stock valuation 'A'
(make-to-stock inventory) are updated in Inventory Controlling.
Thus, if you find a document which is not updated in the info structures
of Inventory Controlling (S031-S039) and you require this, check the
corresponding documents in the materials management tables. You can find
the special stock indicator and indicator of the valuation of the
special stock, for example, in document segment table MSEG in the
following fields:
MSEG-SOBKZ = Special Stock Indicator
MSEG-KZBWS = Indicator: Special Stock Valuation
Only A type (make to stock ) are updated in the info structures.
Hoping this helps.
Regards,
Rajesh. -
Tax is not getting updated in Sales Order Pricing Conditions
Hi ,
Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
Following are the changes for in the standard Pricing:
1) Created ZPSC condition type to calculate the sur-charge from Z-table
2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
We implemented the logic for updating values of Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
Please suggest how to update the Tax values correctly without manual update.
Thanks ,
Rajesh Sanapala.Hi Lakshmi,
I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
Thanks
Ivy -
Data is not getting updated in table using RFC
Hi Experts,
In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
Regards,
SariHI Sari,
as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
-- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
-- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
Thanks,
Bhupesh -
The currency is not getting updated in the table VBAP
Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
SenthilDear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe -
Data is not getting updated in DB table
hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table
sender side: ZVendorIdoc
receiver side:
DT_testVendor
Table
tblVendor
action UPDATE_INSERT
access 1:unbounded
cVendorName 1
cVendorCode 1
fromdate 1
todate 1
Key
cVendorName 1
if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
plz suggest if any change need to be done to update the data
Regards
sandeep sharmaHi Ravi
you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
i did on exp with this : i deleted all the record from the table and then triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
Thanks
sandeep -
Data is not getting updated in R3 from CRM
Hi All,
I have a small query pertaining to CRM Middleware.
We have extended the standard scenario using EEWB for sending few customer fields thru CUSTOMER_H. This is assigned to the adapter in R3AC1.
The data is getting populated in the structure correctly. But the problem is that the Z* field is not getting updated in R3. The more strange thing is that it is getting overwritten in CRM by data from R3.
I have checked the problem and found out that the updateflag for z* field is missing. But the problem is that I donot know, how to populate the update flag for the field.
Is there any customization or setting in EEWB for updating the flag?
Please help... Please let me know if u want more informaiton.
Thanks
SanuSanu,
The reason for R3 data getting overwritten in CRM is because the BSS_CENTI has a blank record
and BSS_CENTIX structure might have a X indicator within BAPIMTCS structures.
BSS_CENTI holds central data for the customer and BSS_CENTIX holds the change flags for the fields in central data.
To fix this issue, you have to use CRM table SMOFSUBINT and configure a custom function module which basically yanks the 2 structures from BAPIMTCS table.
Note:- You do this ONLY if you don't want custom fields from ECC to update CRM. Otherwise you have to make sure the BSS_CENTI and BSS_CENTIX structures are consistent in CRM and ECC. -
Item text (BSEG-SGTXT) is not getting updated in Payment document generated
Hi All,
Item text (BSEG-SGTXT) is not getting updated in Payment document generated through F110.
After generating the payment document via Transaction Code u2013 F110, system is not updating the
Text field (BSEG-SGTXT) in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
In case of manual payment (F-53) we can input the text manually hence that will get updated in
payment document but this thing is not possible with F110.
How can I update it?
Is there any configuration for that?
Thanks
Daniel DortaHi All,
I've applied the two notes as recommended. However, when I run FBL3N for payment run items, the Text field is update with wrong data, i.e. not from the Text field in FB60
Thus, I'll like someone to help me with what should exactly be done on the 'Step', 'Pre-requisite' and 'Substitution' side of the Substitution rule (TCode GGB1), I did not fill anything in the Pre-requisite box - is this right?
Thanx in advance. -
Leave approved in Portal is not getting updated in Infotype 2001
Hello,
I am using the standard WF - WS12300111 for Leave Request in the Portal.
The workflow is working fine in the portal; Manager could approve / reject the leave request in MSS and it is updating the portal Team calendar and ESS Employee Leave details.
However the approved leave is not getting updated in the Absence infotype 2001 in the back-end system.
Could you help ?
Kind Regards
DesyProgram (SE38) - RPTARQPOST has to be scheduled in order to update the status of leave requests and post to PA2001 after they have been approved.
Is there any other way ?
Maybe you are looking for
-
Can you help struggling with macbook pro since updating to yosemite? maginifying glass in top right corner is not offering utility options only comes up spotlight and wont searc what I want. I need to erase SD card
-
The power went out and when it came back on, my computer seemed fine. I was able to access the internet through Firefox as usual. However, if I closed my session and tried to reopen it, it would say that there was already a session open and that I wo
-
Can't open tiff files in PSE8?
In PSE4 I saved files as Tiff's, but now I can't open them in PSE8. What am I doing wrong? Thanks!
-
Sharing a Premiere project online
I'm working with a producer (from afar) that has Premiere Pro CC, as do I. We would like to be able to transfer bin/sequence information between us to update our projects accordingly. I've tried exporting a modified sequence via XML and on import (at
-
Aspect Ratio of Letterboxed DVX100 Footage
I'm wondering if anyone knows what the exact aspect ratio would be of DVX100 footage with the widescreen matte turned on. In trying to measure it in Final Cut, applying the 1.66:1 and 1.70:1 mattes don't do anything, but the 1.78:1 matte crops off a