Insert new Master Data Record for an InfoObject using a Function Module

Hi @ all,
is there any Function Module for creating a new master data record for an InfoObject? Implementing a FM for inserting a master data record into a master data table is done quickly. I think there will be problems with inconsistency implementing a FM using a simple "Insert" Statement. Isn´t it?
I know it is possible to maintain an InfoObject in RSA1 (Master data IO> right click>Maintain Master data>execute(F8)> ...) but I have another requirement for using a FM.
Thanks!
Regards,
Johannes

use this
RSNDI_MD_ATTRIBUTES_UPDATE

Similar Messages

Master data Load for Substance Creation : Using BAPI in LSMW ?

Hi ,
Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
Appreciate your help and suggestion.
David

Thanks John.
I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
With Respect & Regards
David

Documentation for RS_EU_CROSSREF (where-used list function module)

Hi,
I'm trying to understand how to use the "RS_EU_CROSSREF" function module.
It corresponds to the where-used list function you find in so many SAP screens.
I need to use it in a program, but I can't find any good documentation about it.
I'd like something that tells me what values I have to fill in parameters.
For example, how to search form "TEST_FORM" in all programs ? or even in a given program, I didn't get how to restrict the search to a program...
Thank you for any help,
Quentin

Hi Gurpreet Singh,
table cross does not find any function modules although I know for sure that there are function modules calling the function module.
Please post an example of how to find function modules calling a function module with RS_EU_CROSSREF.
/Elvez

Master data records for time dependant data

Hi
In R/3. say master data has 1500 records. In BW, while loading this, i get the same number of records in monitor.
But when i check the maintain master data for this info object, I find each row being duplicated. The difference being the valid to and valid from date. The info object is time dependant.
So my question is: this adjustment done...is it ok continuing forward or do we change something now so that i dont see duplicate rows?
Thanks in advance
AR

hi,
everything is ok here (I assume you have timeframes for e.g.: 01.01.1000 - 27.12.2005 and 28.12.2005 - 31.12.9999).
If you are working on developement system now - change something time-dependent in your master data tommorow (in your source system) and extract delta. Two new periods will be created and you will have 3 records, e.g.: 01.01.1000 - 27.12.2005 , 28.12.2005 - 28.12.2005 and 29.12.2005 - 31.12.9999.
Regards,
Andrzej

Writing to FI-GL records to Delta Queue using a Function Module

Has anyone of you tried to write FI-GL transactions to delta queue using BTE by configuring a function module. I am trying to achieve it for a datasource based on a view on FAGLFLEXA table (GL Line Items). For some reason I am not able to see records in Delta Queue. I am doing this to achieve RDA functionality. If you have done it please sends me step sequence and the name of FM.
Your help would be highly appreciable.
Regards,
Ram

Hello Ram,
See this SAP Network Blog: [Generic Extraction via Function Module|/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module]
Have a look at these docs,
[How to Create Generic Data Sources which use the Delta Queue (NW7.0)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b68b99-022e-2a10-999d-c4dc9ec24a59]
[How to Create Generic DataSources Which Use the Delta Queue (NW2004)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf]
[How to Create Generic Delta|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33]
Thanks
Chandran

Material creation for All VIEW using BAPI Function modules

Dear All,
             I want to create materials for all views using BAPI F.Ms. By using BAPI_MATERIAL_SAVEDATA i have extended materials for for only specified views. now my requirement is to create Material with All views including Classfication view also. For this i found BAPI_OBJCL_CREATEFM.
         Tell me that shall i use both Fm's at time to create material.Will it work? According to my knowledge we need to create Characters first ,then we should assign this character to this class, then while creation of material we should select this class .
        so pls guide me the procedure to follow for both FM's .
Note : Pls don't suggest me LSMW OR BDC procedure.
regards,
Prashanth Maturu.

Hi prashanth,
U can use both the FM. using BAPI_MATERIAL_SAVEDATA u can create all the views and for classification view use BAPI_OBJCL_CREATE. before assigning class to material u hve to make sure that the characteristics are uploaded and is attched to the class using transaction CL03.
Regards,
Anil N.

Problem When Try to add Master data record for User define form

Hi,
I have made one user define form. And assign UDO and fields proerly in form.
But when I try to add the record from the form it will give me error
Invalid Code [Operation Master -Code] [Message 173-36]
I have already bind the code field of the table to one field in the screen painter.
Please give me the reply.
Regards,
Gunjan Shukla.

Dear Shukla
Can you please try to do the binding in the code (after loading the from).
Doing that, do you still have the problem?
Best regards,
Miki

Master Data Load for New Attribute

Hi Users,
We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
Please suggest
Regards
Zabi

Hi,
The situation is:
Field x from source maps to
1. field y ( which was existing field ) and also maps to
2. field z which is the new attribute.
field y has to get updated for company codes 10 for example.
field z for company codes 30.
now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
Master Data Load for New Attribute

Identifing duplicate master data records using the MDM Import Manager

hi all
I read the Topis "How to identify duplicate master data records using the MDM Import Manager</b>"
i tried to create import maps and to set rules. but when i import them it creates the new vendor records for each rule with rest of the fields blank.
when i import vendor data all the three fields i.e Match rate , match type and match group are blank.
My Question is :
I am getting vendor data from SAP R/3.
In which source (in lookup xml file or data xml file) do i have to include these above three fields and how all the rules will be reflected in repository?

Hi Sheetal
Here we go when do you Import any data (vendor master) please follow the following steps;
1. First of all apply the map to the source data
2. In the Match Record tab there are 3 possiblities
   a.[Remote Key] : Checks the current source rec with
     repository along with all the fields - This is
     default
   b.Remove [Remote key] - by double click the same; and
     choose any single fields like Vendor Number or
     name - Then the current record will be matched
     with the repository based on the field.
   c.Instead of single field you can choose combination
     also.
3. Based on the Match results, match class will be set
   automatically;
   a. None
   b. Single
   c. Multiple
4. Then Match Type
    a.Exact-All the individual value matches are Equal.
    b.Partial-At least one value match is Equal and at least one Undefined; no value matches are Not Equal.
    c.Conflict-At least one value match is Equal and at least one value match is Not Equal.
5. then chek the Import status and Execute the import.
Hope this helps you.
cheers
Alexander
Note: Pls dont forget reward points.

Maintain number range interval for master data upload for existing employee

Hi Experts,
1)I have the scenario to upload additional data for existing employees in PA. Employees are already existed in SAP HR , But additional Infotypes are required to maintain for those emploees
2) I have the senario where i have to upload master data for new employees.
Pls give the detailed description of how to maintain number range interval i.e. External or Internal for upload in both the above scenario. Do we have to maintain number range manually in master data record & then upload it Through BDC or LSMW?
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Edited by: Rob Burbank on Jan 12, 2011 3:49 PM

>
s c patil wrote:
> 2) For new employees i have to maintain desired ( my or client?) number range in SAP system as External number range & then default that number range in NUMKAR & then maintain those number range in master data record & then get the data template filled by client & then upload the data & after that create new number range which is next to existing External number range as an Internal number range. & then default that Internal number range.
>
> Pls reply ASAP
Yes Mr. Patil...
For existing employees
you need to execute HIRING ACTION Through BDC with External number range. While recording you have to use atleast three infotype i.e. IT0000,IT0001,IT0002. In addition you can upload other infotype through PA30.
For new employees
While configuration you can create another number range as internal for new hiring. and use NUMKR feature as well.
Here I don't understand that why r u looking for upload process for new hiring, if it is not mass hiring. It should be day to day activities which would be done by user through PA40.
Best Regards,
Anand Singh

Master data load for 0COSTCENTER (Cost Center) failing

Hi Experts
I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
(R) Filter Out New Records with the Same Key
(G) Starting Processing...
(R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
Could you help me on this one please.
Regards
Akshay Chonkar

Thanks All
I have got the issue resolved
The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
Everything is fine now thanks for your help.
Regards
Akshay Chonkar

BPS Web New master data (info object value) added to planning area

Dear all,
I am working with BPS in Web.
Here you can add lines.
Request:
The user wants to add a new value of the lead column, ´
which is not yet active in the master data of the info object envolved here.
He simply wants to enter the new value in the opened new line and the
system should store(add) that value to the master table,
so that he could directly plan KF values to that new line.
I know that we can use FM 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
to post directly new values to the bespoken info object.
Where and how could I add this function to the process.
Note:
It seems that the BSP dispatcher doesn't pass that line
because the "invalid" line is rejected in a step before ??
Many thanks for your help in advance !
regards
Paul

Vlad,
Transaction RSD1 gets you into infoobject maintenance and it more or less equivalent to RSA1 and infoobject althought they have some better listing facilities for infobject in infocubes than RSA1.
Paul,
Are you really sure you want to give your users the ability to create new master data without any validation and potentially compromising your data quality and data integrity?
Sometimes in BPS you have to ask whether or not you should even though you could...

Planning against new master data

HI all,
How do i plan against new master data that has no actual data.
For planning forecast data we maintain an admin cockpit. Now Is there a way that i run some exceptional reports to retrieve the new master data and then feed it for planning.
Appreciate your help in advance.
Regards,
Harika.

Hi Harika,
I assume you have a plan cube on which you are doing planning,.
For your requirement, may be you can create a lower level DSO which will pull records from the Master data. You can then create a transformation from the the lower level DSO (which will have updated records) to your infocube. Once you run this, the infocube will have the updated master data..
Although not fully sure whether this process will help you or not.. Nevertheless you can try it...
Regards, Rishi

Track Master Data Changes for Multiple countries

Hi experts,
I am in a Global HR Implementation & Rollout Project. We are creating Outbound Interfaces for 3 countries to export pay, time and general data to the 3rd party systems in those local countries. (Payroll is outsourced there).
As well as sending New Joiners data every month, we need to send Changers data also to all those 3rd partys every month before the Payroll runs.
I know 2 solution for this :
a). Using Change Documents - Tcode : SCDO ..etc
b). Using the report RPUAUD00.
c). Using RBDMIDOC.
Query :
1). Are these the only solutions ?
2). Whats the best solution for doing this for a Global Rollout project ? I need to track master data change for different countries for different set of Infotypes and fields. I need to send those Changers data as well as the New Joiners data through the Outbound Interface to all the local countries.
This year we are doing for 3 countires, next year for 9 more countries, etc. Whats the best solution keeping this in mind ?
Restrictions :
1). Our Client HRs dont want us to disturb the report RPUAUD00 as they use that regularlly and want the flexibility to configure the configs themselves.
2). If I must need to create and activate Change Documents for ALL individual fields, is there an easy way of doing this ?
3). I need to send this Changers data from SAP to Legacy system, so dont know if RBDMIDOC will be a good solution for this. Any comments ?
Just want the best possible and feasible solution for this issue.
I will be please to allot point to anyone who gives a good solution.
Moreover will be Thankfull also !!
Cheers.

Please try with transaction code "PC00_M02_LINF0"
Cheers
Suresh.KK

How to check the master data records in using SE16 transaction?

Hi,
Can you please help me to check the master data records using SE16 transaction?
Loaded master data for Characteristic and want to check the records in the master data tables.
Thank you for your help!
Lakshmi

Hi!
Welcome to SDN.
you have to check the master data tables.
soo in Se16 you have to select the appropriate master data table and view the data.
following thread explains about masterdata tables
MasterData table?
regards
mohan
Message was edited by:
Mohan Krishna

Insert new Master Data Record for an InfoObject using a Function Module

Similar Messages

Maybe you are looking for