Hr_organization_api costing information

Hi All,
I am creating Organization,classification and costing information through API. Can you please tell me how to upload costing information as i cant see any parameter for costing in create_organization procedure. I can see parameters in update_organization. So does it mean first i need to make a call to create_organization and then again update_organization for costing.
Also for classification i am using create_org_classification, but i can see a procedure create_org_information. Can you please tell me which is the correct method to use and what is the use of other method.

i see 2 options:
- enter them once manually in your master environment
- use dataload

Similar Messages

  • Inactive Items Report mising cost information

    The Inactive Items Report which is found under Inventory / Inventory Reports / Inactive Items does not provide the option to display average cost and total cost on the report. This is very useful information for financial managers trying to determine the value of slow moving or obsolete items.
    It would be extremely useful to have the option to add cost information...perhaps by selected price lists...to make this a more valuable information tool for financial managers.
    Is there a report option which would display this information?
    Note that price lists (average cost) may be different by location. Therefore, the report also needs to show inactive items by location, not only in total.
    Edited by: Dennis Milosky on Jan 26, 2011 1:13 AM

    Gordon
    I am not sure why on one hand you indicate that it is not that difficult to write the report for ourselves, yet say that there are too many variables. These seem to be contradictory statements.
    It seems that since this would be of common benefit to nearly all SAP B1 customers, SAP would want to add it as a future release level report.
    I understand that there are cost variables, but why couldn't there be a pull down menu to select the price table such as with the Inventory In Warehouse Report? In that report, the user is given the option to assign the desired price source.
    Again, it seems as if this would be of common benefit and is worthy of SAP resources.
    Best regards,
    Dennis Milosky

  • Shipment cost information  - handling units

    Hello ,
    ( After reviewing notes 393849, 934370 , 746606  )
    i  have a problem with shipment cost information from sales
    order ( VA02 ; VICI ) when the shipment cost is calculated according to handling units.
    In our S.C.C regular scenario the shipment cost is calculated according to the packing materials in the shipment ( VT02 ) .
    The pricing procedure includes the follwing condition records :
    Condition y050 :  Calc.type - S ( number of shipping units ) ;
                      Calc.base - C ( Handling units ) .
    and a few conditions with the same definition as : 
    Condition y051 :  Calc.type - S  ( number of shipping units ) ;  
                      Calc.base - '' ( ALL ) .
    ( in order to overcome regular S.C.C customization the above  
      p.procedure is determined in exit -  shipment costing : configure 
      pricing - V54B001 - EXIT_SAPLV54B_001 ) .
    After filling the necessary fields in VA01/VA02 such as Material , volume , weight , packing proposal and then executing  the shipment cost information according to the planning profile we get error message
    ( VY-140 ) :
    " shipment cost not saved because they contain no items " .
    After debugging in   - EXIT_SAPLV54B_002  : none of the handling units in VA01/VA02  ( packing proposal )  is transferred to pricing structure "KOMP" and therefore the shipment cost calculation is
    not completed ( to my best knowledge . . . )  .
    when proccessing the transactions online VA02->VL02N the packing proposal is  transferred as expected .
    any ideas ?
    Regards
    ASA

    Hi Sudeer,
    Once again please check the configuration steps
    -->Define Shipment cost information profile
    -->Assign planning profile
    -->Also check the variants which you are maintaining in the planning profine.
    -->Check the input data in the variants which you have maintained.
    Go through this link about Shipment Cost Information in the Order
    http://help.sap.com/saphelp_47x200/helpdata/en/83/218ac8068a11d2bf5d0000e8a7386f/frameset.htm
    I hope it will help you,
    Regards,
    Murali.

  • R12: Cost Method in Inv Setup Org Params Costing Information

    Can someone confirm my suspicion that the Costing Method field in Inventory > Setup > Organization Parameters > Costing Information tab DOES NOT APPLY to OPM "process enabled" organizations?
    The actual costing method for OPM is determined by the Cost Type that is setup within OPM Financials and assigned to the OPM Cost Calendar.
    Just curious if the Costing Method field has any affect (good, bad, or ugly) whatsoever with the OPM setup...

    Yes, I'm pretty sure it has no meaning when you enable an org as process mfg. I can't get into conventional item costs when org is OPM enabled - it gives a message. The OPM costs are stored in another table to normal costs and it makes sense that you can't have an OPM and a discrete cost for the same item in the same org as only one cost can make it through to the GL.

  • Shipment cost information

    Hi,
    in transaction VT02N if i click on "Freight Costs estimate" button a pop-up window appeara displaying Net value of Shipment cost information (<b>RV54_FRINF_RES-RESULT</b>).
    My question is:
    from Shipment number (<b>VTTK-TKNUM</b>) is it possible to get  RV54_FRINF_RES-RESULT?
    if so How?
    Best regards

    Hello Gurus,
    I have a request to build a report that shows the freight cost by supplier given an Shipping point at point of departure and destination country/region.
    Basically what I want is to red the supplier freight costs table and build a list of prices for a given route. This would help to justify the choice of suppliers given their costs by route.
    For what I've seen there are some function modules that simultate the transport/freight costs, but all of them assume that a transport and a number actually exists, This is the way that standard transactions behave when creating a new transport.
    So far I've tried to use FM:
    SD_SCD_SIMULATE_FREIGHT_COSTS
    BAPI_SHIPMENT_COST_ESTIMATE
    I've also activated and analised trace on transaction tk12 till the point I get the cot values for a given supplier (the matrix with region origin/destination) and tried to find a way elaborate a query to relate the tables involved, but had no luck.
    I do know that the suppliers are in table A925 that relates them to a condition. What I haven't been able to do is to relate that condition to the orgin/destination region codes and furthermore to the bi-dimensional table of prices VFSCAR2 that actually has the prices for each supplier. When I double click the cell of the price the popup opens with the exact infomation I want to find, so how can I get to that?
    Please help.
    Thanks in advance.

  • HSM Vendor and cost information?

    Hi All,
    Can you help me get answer for below questions-
    Who is/are the vendor to purchase the HSM hardware? Please let me kkow if you are aware of cost information?
    Edited by: Vinayak C on Oct 5, 2012 5:17 AM

    This is spam and I have reported it as such.
    To everyone that sees this posting before it is removed ... please do not google HSM unless you are volunteering to be spammed.

  • How to obtain Unit Cost information

    Hi,
    Which table contains the unit cost information for an invoice item? How do you obtain this information?
    By Unit cost, I mean output such as '850.10/100'. This means every 100 units costs $850.10/100. Where is this stored?
    Please help.
    Thanks,
    John

    Is there anything like this in the BKPF or BSEG tables?

  • Can some one explain me on Exchange server / CAL licesing & where I can find current cost information?

    Can some one explain me on Exchange server / CAL licesing & where I can find current cost information?

    Hi,
    As far as I know, every user need a license to use Exchange server and we can choose User CAL or Device CAL.
    For more information about license, you can refer to the following articles:
    Licensing Basics: What are CALs (Client Access Licenses):
    http://blogs.msdn.com/b/mssmallbiz/archive/2007/11/06/5942350.aspx
    Exchange Server 2013 licensing:
    http://office.microsoft.com/en-001/exchange/microsoft-exchange-server-licensing-licensing-overview-FX103746915.aspx
    Exchange Licensing FAQ:
    http://office.microsoft.com/en-001/exchange/microsoft-exchange-licensing-faq-email-for-business-FX103934581.aspx
    For the cost issue, I recommend you call Microsoft Licensing for useful information. And they will be able to give you an estimate based on your requirement.
    http://www.microsoft.com/licensing/
    If you have any question, please feel free to let me know.
    Best regards,
    Angela Shi
    TechNet Community Support

  • Not getting Cost information when using /*+ RULE */ in toad 9.5

    Hi,
    While optimizing a query when I am using /*+RULE */ in the query I am not getting any info for cost and cardinality.
    Can you tell me is the /*+RULE* / obsolete in oracle or what can be the reason.
    Help me..
    Thanks in advance.

    948707 wrote:
    Hi,
    While optimizing a query when I am using /*+RULE */ in the query I am not getting any info for cost and cardinality.
    Can you tell me is the /*+RULE* / obsolete in oracle or what can be the reason.
    Why are you using that hint?
    Aside from the fact that rule based optimization is obsolete, the optimiser can either do Rule based optimization or Cost based optimization. Why would you expect to get Cost based information when using Rule based optimization?
    Don't use such hints. Cost based optimization is far superior to rule based.

  • Shipment cost information in Quotation

    Hi all!
    If i try to do shipmento cost infomation at Order level, it's all ok...
    But if I try to do this (with path EXTRAS - SHIPMENT COST INFO) at Quotation level, i have a problem..
    The system doesn't calculate the Shipment cost, and LOG informs me that no deliveries are created..
    So, can i do shipment info at quotation level?
    If yes, what can i have to mantaint to do it possible?
    Thanks a lot
    Best Regards
    Alba

    Hi Alba,
    you have to assign the Shipping Cost Info Profile to your Quotation. (T.code VOV8).
    Regards
    William

  • Sales Order Costing-Information/Message

    Dear All,
    At the time of sales order costing, if the Component Cost(material Cost) is 70% of Total cost , SAP system should display information or warning message.
    Please give your valuable suggestion

    Hi,
    CK869 is introduced after 46C to inform you that the total of the cost component is different from that of itemization.
    The message CK 869 is normally generated correctly. This is clarified in note 168238. If an assembly component is subsequently costed again, the new costing results are updated to the cost component split as this information is dynamically called, unlike the itemization.
    Please check if any of the sub-components have been costed after the header material has been costed.
    Once the header material is also re-costed (after all sub-components have been costed) message CK 869 will no longer occur.
    The issue arises due to the make-up of the cost component split; the system must read this information dynamically, therefore the most up-to-date is always visible. The itemization always reflects the data at the time of the original costing.
    To avoid such problems in the future, you should do the following:
    -> Always cost the header material again if a material component with  changed values is being costed.
    -> Cost all materials again after price calculation is run for a  PARTICULAR period.
    regards
    Waman

  • Standard extractor for shipment cost information(appl.08)

    I need some clarification on "08" extractors.
    We are using BW30B with PI2003.1 on the SAP enterprise side. We need to transfer the shipment cost details like cost centre, business area, G/l account etc? We have shipment cost documents which have the accounting/cost center field KOSTL shown as 'Cost Center'='10-0HAD'; business area (field GSBER) as 1010. But the data is not getting transferred!
    What we did was using Tx LBWE, the extract structure MC08TR0FKZ has been enhanced with the field KOSTL (MCCOMVTRLP KOSTL Cost Center). Similarly in the data source 2LIS_08TRFKZ (Shipment Costs at Delivery Item Level) shows the field KOSTL. In the data source this field is not hidden. In the table
    ROOSFIELD for the data source 2LIS_08TRFKZ, the field KOSTL is present.
    This has field "SELECTION" as value "P". Same for field KOKRS & GSBER!
    We are getting the fields MATKL, MTART , PRCTR properly populated since
    the extract structure and data source was enhanced with these fields
    also and in Table ROOSFIELD, they also have field "SELECTION" as value
    "P".
    What are the possible reasons for above? am I using the wrong structure or such details cannot be transffered using standard means? What exactly is meant by "SELECTION" as value "P" in table ROOSFIELD for a particular field say KOSTL.
    regards

    Hello,
    you should check the function module MCEX_UPDATE_08 if there is the internal table MC08TR0FKZ_TAB enhanced with your fields, because there this table is filled for the extract structure MC08TR0FKZ with the communication structures MCCOMVTTK, MCCOMVTTS, MCCOMVFKP, MCCOMVTRFKZ, MCCOMVTRLK and MCCOMVTRLP. Debbuging this function module will help to find out if your field is filled or not.
    If it´s not filled i think it is easier to make an append on the extract structure and fill the field in the customer exit. Otherwise you have to modify the function module mcex_update_08 or the function modules SD_SHIPMENTS_SAVE, VTRBW_SD_SCD_SAVE or VTRBW_SD_SHIPMENT_DATA_SAVE.
    Markus

  • Limit User Ability to Update Cost Information

    We have added Item Costs:Maintain subfunction to the menu exclusions of a responsibility. With this we have achieved the restriction of cost update for that particular responsibility. But this has also restricted the ability to update the pending cost.
    Our requirement is to restrict the ability to update Frozen costs only. Pending costs should still be updatable. Did anyone face a similar problem and is there any way I can restrict the update of Frozen costs only.

    You can try to use Form Personalization to achieve this. For the queried record if cost type in 'Frozen' then make the block query only (Set insert allowed and update allowed to false). This should be easy to create. Please let me know if you face problem or have further queries.

  • Work Order Costs

    Hi Experts!!
    We need a report on the work order costs, however, we have some non-valuated materials in the components list.  We are trying to pull the costs of the non-valuated materials from the Purchase Info Records and show that costs as part of the Warehouse Issues Actual cost.  I thought this would be a custom report - Please let me know if any standard report is available or any way of tweaking the standard report.
    Also I am able to see the Actual/Planned costs of the order on iw33 costs tab.  I am trying to find out if there is any standard FM that i could use to get the work order costs.  Also is there any infosets that i could use to pull the data for the jobs costs in my custom report.
    Regards,
    Yuvi.

    Hi,
      Have a look at transaction IW3M(Goods  movement for order),It might be easier to modify this to pick up the Last PO price (Or Info rec price) for the non valuated materials.
      Have a look at FM PM_WORKORDER_COSTS_LIST this will list out the costs at the value category level and also show the total costs, very similar to what IW33 shows.
      The costing information can be picked up from table PMCO.
    Regards
    Narasimhan

  • Any UserExit while Posting Shipment cost?

    Dear All,
    SD transportation/shipment cost integration with MM-Account Payable.
    Process:
    1. VA01 - create sales order
    2. VL01n - create Delivery
    3. VL02n - PGI
    4. VT01n - create Shipment
    5. VI01 - create shipment cost doc.
    Here  PO will get generated automatically. For that PO, a service entry sheet is created for every L.R no given by Transport vendor. Then MIRO is posted for the service entry sheet.Payment is done against that.
    But my client's requirement is that normally transporter will have contract with the company.  Transporters supply to various Customer place and raises the bill for every L.R no.
    In case of Transporteru2019s freight bills settlement, vendor invoice posting should be L.R no wise which is captured in Shipment
    L.R no wise tracking is required for Transporteru2019s payment.
    I understand that there is no SAP STD integration of LR number of shipment doc with vendor Incoming Invoice posting. But Vendor invoice can be posted for multiple POs.
    When shipment document is created, the system will generate PO automatically in the background. L.R number is to be captured and should be passed on to PO doc through USER EXIT.
    Hence I request you to  kindly reply USER EXIT available for Shipment doc. so that the customization (development) can be done in transporteru2019s (vendor) payment L.R No. wise.
    Please reply your view in this regard.
    Regards,
    Anbu

    Hi,
    Exit Name           Description VI01
    V54B0001            Shipment costing: Configure pricing
    V54B0003            Shipment Costs Calculation: Determine Rate Type and Currency
    V54B0004            Shipment Cost Calculation: Determine Status
    V54C0001            Shipment costing: Description(s) shipement cost item(s)
    V54C0002            Shipment costing: Create shipment cost sub-items
    V54C0003            Shipment Costs Processing: Determine Invoicing Party
    V54C0004            Shipment Costs Processing: Determine Loc. for Tax Invoice
    V54D0001            Shipment Costing: Determining the Tax Countries
    V54KSFRC            Determining the factors for apportionment of shipment costs
    V54P0001            Extended Function Codes for Shipment Cost Information
    V54U0001            Shipment cost processing: Check whether changes made
    V54U0002            Check shipment costs for completion
    V54U0003            Specification of shipment cost number
    V54U0004            Formatting for update of new objects (shipment costs)
    V54U0005            Updating new objects in shipment cost processing
    V54U0006            Shipment Purchase Order - Header Data Supply
    V54U0007            Shipment Purchase Order - Item Data Supply

Maybe you are looking for