HR PA-EC:  No Data in Source when data is there

All,
I have activated standard business content and have connected ECC 5.0 source to BW 3.5. I tried executing a load for Compensation Process ODS and the load says there is no data available in source system.
I checked the source and infotype tables 0759 & 0758 both contain data. I also did an extract check in source and it returns values, however when executing the load in BW it returns no values.
Any advice?
Thanks,
DC

Hi
Execute from se38 the program RS_TRANSTRU_ACTIVATE_ALL, inpute the related infosource name and execute it.
Also replicate the data source from RSA1.
I hope this help.
Rgs
Antonino

Similar Messages

  • Master Data and Source System Data Reconciliation.

    Hi Experts,
    I would like to know the best ways in reconciliation between the source system and the data that is extracted into BW.
    We are using only standard DataSources.
    I am currently running RSA3 on a DataSource on IS-U side and then comparing it to the number of records in Master Data Maintenance on BW side. But I have noticed difference in counts.
    There is no ABAP logic behind the extractors.
    Kindly, suggest the best ways to do effective reconciliation.
    Thanks in Advance.
    Best Regards,
    Chandu.

    At the outset, I will sugegst you activate the data in the master data info object and also perform attrubute change run before you start the reconciliation.
    One of the main reasons of data mismatch for master data is presence of "duplicate" records at the source system and you do eliminate them during the data loading process. In your case, you say there is no data manipulation during the data loading process.
    Another reason is where you bring master data from multiple sources and the later load of data overwriting the earlier load of data for the same key of records.
    Assume you load data to the PSA before you load to the info object. The practice is to reconcile with the PSA data to the RSA3 first and then between the PSA and the master data.
    Ravi Thothadri

  • Sorting photos by date/time taken, when date/time created is not an option?

    I'm so sorry if this has been answered elsewhere, but I can't find it on Google or in the forums...
    I need to sort wedding photos from multiple photographers by date taken so I can sort through the wedding as a full event. Sorting by the date/time the file was created will not suffice because I had to convert all photos from one of my photogs from NEF to DNG (D610 files not compatible with CS5), so the 'date created' for those DNG file is days later than all the other images. Thus, sorting by "date created' batches all the photos from one of my photogs together at the end.
    Is there any option in Bridge that will actually read the metadata and sort by the shoot time of the image?
    Thanks for any help!

      There has been a known bug in PSE9 although only affecting raw images and caused by the Camera Raw 6.4 update. The timestamp gets changed by one hour each time an image is modified. I don’t know if your issue is related but the work around is to revert to ACR 6.3
    http://kb2.adobe.com/cps/915/cpsid_91582.html
    The only other work around is to temporarily switch to folder location view, if your images were imported from a single folder. Click on the display button (near top right in Organizer) to change the browser view. If you click on the folder in the left hand pane the files will normally be in sequential file name order which usually mirrors the date/time taken. From the folder location it’s possible to create an instant album, which can then be used as the basis of a slideshow.

  • Can we set the dynamic data source when using getReportParameters() ?

    Hello!
    I have a report where one of its parameters refers to a list of values (LOVs). This list of values is an SQL Query type. When the data source used in the report is defined in the BI Publisher server, I'm able to get the report parameters using the getReportParameters() function in my application. However, if the data source is not defined the function throws an exception, which is understandable.
    I decided to dynamically set the data source so that even if the data source used by the report is not defined in the BI Publisher server, it still will be able to get the LOVs for the parameter. I tried setting the JDBCDataSource of the dynamicDataSource for the ReportRequest object that I passed to the getReportParameters() function. Please see the sample code below:
    reportRequest.dynamicDataSource = new BIP10.BIPDataSource();
    reportRequest.dynamicDataSource.JDBCDataSource = new BIP10.JDBCDataSource();
    setReportDataSource(reportRequest.dynamicDataSource.JDBCDataSource, connectstr, jdbc, dc); //function to set the values for JDBCDataSource object
    reportParams = webrs.getReportParameters(reportRequest, uid, pwd); //call the getReportParameters
    I was expecting this to work as this is what I did to dynamically set the data source before calling the runReport function. So, my question is -- can we set the dynamic data source when using getReportParameters() ? I tried this both in versions 10g and 11g. It does not seem to work on both versions.
    Regards,
    Stephanie

    report_id column of apex_application_page_ir_rpt can help us uniquely identify each saved report.
    We can assign this report_id value to a page item and this page item can be put in the Report ID Item text box of the Advanced section of the Report Attributes page of the IR.
    This should load the saved report identified by report_id and you can get rid of javascript
    Regards,
    Vishal
    http://obiee-oracledb.blogspot.com
    http://www.packtpub.com/oracle-apex-4-2-reporting/book
    Kindly mark the reply as helpful/correct if it solves your problem

  • When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI

    When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI( I am not getting any error message in E$_TARGET_ANI_TEST).
    When i am running the interface i am getting the below error against the errored step
    "ORA-01045: user ABC lacks CREATE SESSION privilege; logon denied."
    Only E$_TARGET_ANI_TEST  is created with no data. No such tables like C$_0TARGET_ANI_TEST, I$_TARGET_ANI_TEST are created and also data is not inserted in the target table TARGET_ANI_TEST.

    Hi,
    I have checked that only E$ table is created. C$ and I$ table are not created ( I have selected my target schema as the part for the staging table).
    All the parameters for dropping the tables are selected as "<default>:false".
    I am importing the following KMs with the following parameters:
    1) CKM Oracle
    DROP_ERROR_TABLE
    :false
    DROP_CHECK_TABLE
    :false
    CREATE_ERROR_INDEX
    :true
    COMPATIBLE
    :9
    VALIDATE
    :false
    ENABLE_EDITION_SUPPORT
    :false
    UPGRADE_ERROR_TABLE
    :false
    2) LKM SQL to SQL
    DELETE_TEMPORARY_OBJECTS
    :true
    3) IKM SQL Incremental Update
    INSERT
    :true
    UPDATE
    :true
    COMMIT
    :true
    SYNC_JRN_DELETE
    :true
    FLOW_CONTROL
    :true
    RECYCLE_ERRORS
    :false
    STATIC_CONTROL
    :false
    TRUNCATE
    :false
    DELETE_ALL
    :false
    CREATE_TARG_TABLE
    :false
    DELETE_TEMPORARY_OBJECTS
    :true 

  • Change PowerPivot data source when deploying from Dev - Staging - Production

    We have PowerPivot workbooks we store in SharePoint 2013 Libraries. 
    We have a powershell script which automates the deployment of sites and pages. Is there a way using PowerShell (or any scripting language really) to look into the workbook and change the PowerPivot data source when deployment from one environment to
    another? (Dev -> Stage -> Prod) We need to update the workbooks to point to our SSAS cubes Dev -> Stage -> Prod respectively.
    Thank you for any expert advice you may offer,
    Sincerely,
    -Craig

    Basically, it's an excel file (XLSX) file and you can use excel OM for this.
    A simple program (in C# or any language of your choice) can be written to do the following and achieve what you need.
    using XLS = Microsoft.Office.Interop.Excel;
    string info = null;
    XLS.Application application = null;
    try
     application = new XLS.Application();
     var book = application.Workbooks.Open(filepath);
     foreach (XLS.WorkbookConnection wc in book.Connections)
      switch (wc.Type)
       case XLS.XlConnectionType.xlConnectionTypeOLEDB:
        info = wc.Name + " " + wc.OLEDBConnection.Connection.ToString() + "\r\n";
        break;
     book.Close();
    finally
     if (application != null)
      application.Quit();
    Hopefully, this was helpful.

  • How do I edit data source when opening Lumira project on a new PC?

    I have been working on a project in Lumira for a client of the company I work for. The idea is that I build the Lumira project for them (with the goal of them being able to analyse data from their logistics department), and I then hand the completed project over to them, from which point they are able to update the data on a weekly basis.
    I have been updating the data (which is derived from an excel spreadsheet) for a number of weeks with no issue at all, and the client is thoroughly impressed with it, and with the capabilities of Lumira. The problem is that when I want to share the project with the client, ie. by allowing them to open it and edit it on their own computers I am unable to do so.
    This is the procedure I follow:
    From My Documents, I open the folder named SAP Lumira Documents, select the project in question, and email it to the intended recipients.
    From there, I instruct the recipients to open SAP Lumira, select File>Import to folder, and then select the project.
    When the project is open, it works and interacts perfectly, but at this point, I want the client to be able to do the following:Select Data>Edit; to allow them to specify a new data source (which is identical to the one upon which the project is built), and therefore be able to update the data as and when necessary, without my help.
    When I do this, however, I receive the following error:
    Unable to find file "File Name & Location"
    How do I work my way around this? I could rebuild the project on a computer at the client’s premises, but the idea is that many people are able to use this project, and refresh the data. So it is obviously impractical for me to rebuild this multiple times. I would really appreciate your assistance with this.

    To elaborate on Tammy's idea, you could use for instance C:\Users\Public at the place where you initially put your Excel file to make sure this is found on the target computer. I would consider this a workaround though.
    Or for Lumira documents that you already designed, change the location of the Excel file and use Data/Edit from your computer, then save the Lumira documents before sending them to the target audience. 
    From my humble opinion, the product should allow to use Data/Edit and change the source file even if the initial file path is no longer found. This should be possible for your target audience.
    Antoine

  • Dynamic filter in Design studio using drop-down when data source is Universe

    Hi community,
    Is there anyway to create Cascading filter in Design studio when data source is Universe using drop-down component (Dimension filters cannot be used in my requirement).
    My requirement is,
    I have 2 drop-downs:
    drop-down 1 : shows the regions in a country.
    drop-down 2 : should display states based the region selected in the first drop-down (drop-down 1). Also drop-down 2 should pass selected state as input to the data-source
    Thanks in advance
    Vivek VJ

    Hi Vivek,
    Please check out this post: How to Create Multiple Dropdown boxes (Cascading Filters) when using Universe in the backend.
    Regards,
    Mustafa.

  • Excel Functions Do Not Work When Data Source is BW

    Hello,
    My platform is, BOBJ BI 4.0. Data source is SAP BW. BW is connected to XCelsius with BEx. My problem is, excel functions do not work when data source is BW. For example, Excel cell A1=quantity1  B1= quantity2   C1= excel function "=A1+B1" When data source is Excel, for example A1=5, B1=9 C1 automatically equals to 14. (There is no problem when data source is Excel) But, in BW, for example when BW set values to A1=5, B1=9, the system does not calculate C1. C1 always equals to initial value, the system does not care any excel calculation when data source is BW.  Any guess for my problem? Thank you for your effort.

    Hi,
    As you are using very simple formula,it will work no matter which source you are consuming.As mentioned,try to place a simple component(Eg:spreadsheet),just to check whether you are getting the right calculated value or not.
    As you are using BW as source,the Preview option will not show the runtime data,so you need to publish in Portal to check whether the calculation happened or not.
    As far as I know only few fromulas are supported in Xcelsius,but these kind of simple formulas are very much supported.
    Rgds,
    Murali

  • Char '¦' gets replaced with '|' in sp source when restoring a data base.

    char '¦' gets replaced with '|' in sp source when restoring a data base. This makes the procedure put a character for separating a string different (|) from the espected one (¦). And this makes the application failed.
    Can anyone help me out?
    Thanks,
    Frank

    I'll follow the thread in Data Base - General from now on.
    In case u see this one first:
    To ALL:
    Thanks 355099, Joel, and Justin:
    Oracle9i Enterprise Edition Release 9.2.0.4.0
    Charset: ?? I'll will ask the data base guy. (we are preaty small). It is reported as a bug in my system, the thing is I usually do not program against this kind of bug. :)
    Anyways, the usage is as follows, this guy uses an empty restore to install the database for application installation purposes.
    instaed of running some scripts the test for the instalation is done as a restore.
    import/export is the action being done here.
    Again I use the ¦ char to separate a string array.
    Something to consider is that the chars are:
    124 | and 166 ¦
    They are both ascii aren't they?
    Why would the impor/export change the char ¦ for |?
    if is a charset problem why isn't the changed char a ? or a # or a 9 or a non printable char, instead it changes for a |.
    x_x
    Frank

  • Which data flow source type to use when specifying a connection manager using an ODBC provider

    I'm trying to create a SSIS package to connect to an IBM iSeries DB2 database.  After running into all sorts of issues seemingly related to data type (issues with packed decimal fields actually having places to the right of the decimal) I decided to
    try creating an ODBC data source on my windows server 2008 r2 Administrative Tools - Data Sources ODBC to connect to the iSeries and then create an SSIS connection manager to use the windows ODBC connection.  Successfully created the ODBC connection in
    windows then successfully added a SSIS connection manger to my project using the windows ODBC connection and tested the connection manager successfully.  To create the connection manager I RMB in the connection manager section - select new connection
    - select ODBC - select the newly created ODBC connection from the list and operate the ok button.  Edited the connection manager specified the userid and pw and connected succcessfully.
    Problem is I don't seem to be able to find a Data Flow Source in the SSIS tool box that will let me specify the connection manager using the ODBC connection.  The Data Flow Sources in my tool box are "Pointer", "ADO NET Source",
    "Excel Source", "Flat File Source", "OLE DB Source", "Raw File Source" and "XML Source".
    Can someone kindly show me what Data Flow Source I should be using and how to specify my SSIS connection manager that uses the windows ODBC connection?
    Thanks Much in advance for any help, Roscoe

    This would help you
    http://social.msdn.microsoft.com/Forums/en-US/c688b646-28bb-44b9-b53b-fddf23e15189/how-to-connect-to-odbc-using-ssis?forum=sqlintegrationservices 
    Abhinav http://bishtabhinav.wordpress.com/

  • How to set the POV in WebAnalysis when data source is HFM?

    Hi Every one..
    Could any one tell how to set pov in web analysis when data base is HFM. And hoe to make the report Dynamicall (Current Pov Member like in FR). for this if use Essbase Ican get it it easiliy by using Subtitutional variable but is ti possible fo rHFM.
    Thnaks in advance
    Rao

    yeas agree with sanakar,
    this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
    Hope u understand this.

  • Urgent help needed: registry.dat is missing when i run my form in web base

    Hi gurus,
    i configured my forms and report server in windows 2003 and i received the following error msg when tryin to access my web base forms 6I.
    FRM-92129: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
    Details...
    Java Exception:
    oracle.forms.engine.RunformException: FRM-92120: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
    at oracle.forms.engine.Runform.initRegistry(Unknow Source)
    at oracle.forms.engine.Runform.startRegistry(Unknow Source)
    at oracle.forms.engine.Main.createRunform(Unknow Source)
    at oracle.forms.engine.Main.start(Unknow Source)
    at sun.applet.JinitAppletPanel.run(Compiled code)
    at java.lang.Tread.run(Thread.java:466)
    what can be goes wrong with my steps to receive the above error?? i tried in windows XP and Vista, and i getting the same error message as above.
    Your urgent help and advise is needed plssssssss.......
    Many thanks in advance.

    The URL doesn't seem correct: http://domain.com/form60java/oracle/forms/registry/Registry.dat
    I'm expecting a slash (/) between forms60 and java. Have a look in the formsweb.cfg if any paths are misconfigured.
    Also, try if the URL with the slash:
    http://domain.com/form60/java/oracle/forms/registry/Registry.dat
    does work when you just paste it in a browser. It should download the Registry.dat file

  • Invoice Date needs to be date when Customer receives goods

    Client when shipping by sea would like the Invoice Date to be the same day the customer received the goods, basically the Pick Up Date even though the delivery might have been 'shipped' from the jetty.
    How can this be done? Would the Invoice Date be the Pick Up date?
    Sanjib

    Hi,
    I guess you're asking about OM shipping and AR invoices. If you have invoicing at line level, as soon as you ship a line, OM insert a line into AR interface and this line is ready to be imported into AR. If you ship from USA to Europe by sea it will take about 10-15 days to goods be delivered. As invoice date is defined when you import it into AR, in order to achieve your requirement, you will not be able to import your invoice into AR and will not have info on Receivables. Or do you want to import your invoice into AR as soon as goods are shiped and change the invoice date when customer receives them?
    In the first option, you could do the following: define two AR batch sources: AIR and OTHER, for example. The first one will be used to sea shipping and the second one to ground or air shipping. In the first AR batch source, uncheck derive date. In OM, define two order types: OT_AIR and OT_OTHER, one to sea shipping and other one to ground/air shipping. In order type AIR, define AIR as batch source, and in OT_OTHER define OTHER as batch source.
    Normally import your transaction with batch source OTHER into AR. For the orders shipped by sea, you will have to import them one by one. As soon as you receive the customer acks, go to ar autoinvoice and import the order received by the customer and define as default transaction date the date informed by the customer.
    I know it is not a good solution, so I think you will need some custom to have it done.
    Hope it helps,
    Ketter Ohnes

  • Buffering table not up to date error message when creating a Cart

    Hi Folks,
    We are getting a 'Buffering table not up to date' error message when attempting to create a Cart. The error message only happens to the one end user ID only with the others not getting this error, therefore suggesting that my SRM org plan set-up is correct.
    Has anyone come across this previously and what checks are available in the system to resolve this? As mentioned, the attribute check is okay and I have also removed the user ID from the SRM org plan and reassigned again but this has not corrected the problem. We are on SRM 5.
    Thanks. Mike.
    Message:
    Buffering table not up to date
    Method: GET_STRUCTURE_PATHS_UP of program CL_BBP_ES_EMPLOYEE_MYS========CP
    Method: IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
    Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
    Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_ID of program CL_BBP_ES_EMPLOYEE_MYS========CP
    Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS of program CL_BBP_ES_EMPLOYEE_MYS========CP
    Form: USER_DETAIL_GET of program SAPLBBP_SC_APP
    Form: GLOBAL_FILL of program SAPLBBP_SC_APP
    Form: SC_INIT of program SAPLBBP_SC_APP
    Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
    Form: APP_EVENT_HANDLER of program SAPLBBP_SC_UI_ITS
    Edited by: Mike Pallister on Nov 5, 2008 11:44 AM

    Please advise on this problem.  When I try to check the Approval Overview tab for these two shopping carts.
    I got a dump.can anyone help me.
    Information on where terminated
        Termination occurred in the ABAP program "CL_BBP_ES_EMPLOYEE_MYS========CP" -
         in "IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS".
        The main program was "SAPMHTTP ".
        In the source code you have the termination point in line 35
        of the (Include) program "CL_BBP_ES_EMPLOYEE_MYS========CM008".
        The termination is caused because exception "CX_BBP_ES_INTERNAL_ERROR" occurred
         in
        procedure "/SAPSRM/IF_PDO_DO_APV_EXT~GET_AGENT_DETAILS" "(METHOD)", but it was
         neither handled locally nor declared
        in the RAISING clause of its signature.
        The procedure is in program "/SAPSRM/CL_PDO_DO_APV_EXT=====CP "; its source
         code begins in line
        1 of the (Include program "/SAPSRM/CL_PDO_DO_APV_EXT=====CM00E ".

Maybe you are looking for