HR Renewal - PAOM Integration fail

Hello gurus,
I am part of team implementing what seems to be the first implementation of HR Renewal in Spain.... awesome... very cool) Today I have an issue with OM-PA integration.... and hope you guys can throw a lil light here....
Creating position thru PPOME or PP01 in R/3 works fine both OM and PA are updated because my client use integration since ever.
In NWBC; we are using P&F Z_SHRPAO_CREATE_POSITION (a light copy of standard SHRPAO_CREATE_POSITION) to create position which works fine on the OM side but PA T528B doesn't get updated.
Therefore when running an PA action and trying to assign this position to an employee, standard error message popup indicating that the position does not exist.
I have tried to activate PAPD switch in T77S0
I have checked a few notes; just requested their application (if it is posible) to my basic team.
1996229 - Integration PD to PA: Incorrect cost center in infotype 0001
1862798 - PD-PA Integration: Correction for infotypes 1000 and 1001
And this one, although my system is 6.07:
1610719 - PD->PA integration in new infotype framework
So my problem is:
I start a PD process that is expected to update T528B e.g a Create Position process and then/or (P&F HRPAO_CREATE_POSITION)
I start a PA process that expects an entry in table T528B e.g Assigning an employee to a position
PA process generate error message position does not exist.
I verify OM side OK; PA side inconsistent.
Same scenario in R3 environment works perfectly fine.
Method EXECUTE_INTEGRATION of class CL_PD_TO_PA_INTEGRATION thru interface IF_EX_HRBAS_PD_PA_INTEGRATION is called after saving when creating position but never reaches past break-point:
Could you find the same behavior in your system? Did you solved it?
Thank you!!!! We'll be waiting for your valuable help!
Cheers.
Antoine

OK! solved with SAP NOTE
1996229 - Integration PD to PA: Incorrect cost center in infotype 0001
1862798 - PD-PA Integration: Correction for infotypes 1000 and 1001
And with
T77S0 PAPD = X
Thank you gurus!!!

Similar Messages

How do I renew the integrity of a possibly corrupted info.plist?

When I try to install Messenger 6.0.3, I get the following error message:
"The Finder cannot complete the operation because some data in
Info.plist could not be read or written. (Error code -36)."
How do I renew the integrity of the info.plist file (ideally without screwing everything else up)? Or is something else at work here?

welbike wrote:
Is there a solution to this problem?
I don't know. It might help if you told me what the message was, and what was the "failing" message you mentioned earlier?
How is it you are now able to install Messenger? Did you repair the disk? Did you download a new copy?
One thing you can do is to open the Console application, from your Utilities folder, and have console.log in one window and system.log in another. Use the "broom" to clear both windows, then try to start a chat session. When it quits, there will be a message in one or both of the console windows.
Copy and paste what you get from these windows (and say which is which). I need to see the exact message to take this further.

Data Protector backup integration fails after upgrade to Oracle 11.2.0.2

After upgrading a system from Oracle 10.2.0.2 to 11.2.0.2, the Data Protector backup integration fails with error
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:21
     Backup session 2011/04/28-74 started.
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:21
     OB2BAR application on "<sap_host>.<domain>" successfully started.
/usr/sap/<SID>/SYS/exe/run/brbackup: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
[Major] From: OB2BAR_OMNISAP@pervs<SID>.<domain> "OMNISAP" Time: 04/28/11 09:10:21
     BRBACKUP /usr/sap/<SID>/SYS/exe/run/brbackup -t online -d util_file_online -c -m all -u system/******** returned 127
/usr/sap/<SID>/SYS/exe/run/brarchive: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
[Major] From: OB2BAR_OMNISAP@pervs<SID>.<domain> "OMNISAP" Time: 04/28/11 09:10:21
     BRARCHIVE /usr/sap/<SID>/SYS/exe/run/brarchive -d util_file -s -c -u system/******** returned 127
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:22
     OB2BAR application on "<sap_host>.<domain>" disconnected.
[Critical] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:22
     None of the Disk Agents completed successfully.
     Session has failed.
We checked the configuration, tried linking /oracle/client/11x_64 to 10x_64, removing the link and renewing the 10x_64 oracle client, but still Data Protector can't find the library libclntsh.so.10.1. A new system which was installed with Oracle 11.2.0.2 doesn't have any problems with online backups.
Any help is appreciated!

Hi,
did you create the other link according to the upgrade guide (point 5.5) ?
You need to create this link so that BR*Tools
(which is linked to the Oracle 10.2 client)
can use the newer Oracle 11.2 clients.
After the software installation has finished,
create a symbolic link in $ORACLE_HOME/lib as follows:
cd $ORACLE_HOME/lib
ln u2013s libnnz11.so libnnz10.so
or (HP-UX)
ln u2013s libnnz11.sl libnnz10.sl
Volker
Second part: For the DP job, there can be set different environment settings inside the DP job.
Did you check if there are still relicts from the previous release ?
You could integrate a small pre-exec script into the job and let it plot the output of
id
env
set
to a logfile, just to see which values the backup is using.
Edited by: Volker Borowski on Apr 29, 2011 10:12 AM

CSV to Oracle - (Integration) fails on the target ORACLE connection

Hi,
I am trying to load data from a csv file into Oracle db via ODI.
Here are the steps i followed:
1- Created the FILE physical schema
1- Created the Oracle data server and physical schema in Physical Architecture
2- Created and linked to logical schemas
3- Created the correspondent data models and stores and a
ble to view the data contents of the CSV and of the target table in ODI.
4- Created interface, added csv as source and oracle table as target
5- Used "LKM File to SQL" and "IKM SQL Control Append" (FLOW_CONTROL is false)
When i execute the interface, the session starts then i receive the following wrror in Operator:
ODI-1228: Task ARIBA_G1 (Integration) fails on the target ORACLE connection DEV_DW.
Caused By: java.sql.SQLException: Non supported SQL92 token at position: 116
at oracle.jdbc.driver.OracleSql.handleODBC(OracleSql.java:1319)
at oracle.jdbc.driver.OracleSql.parse(OracleSql.java:1190)
at oracle.jdbc.driver.OracleSql.getSql(OracleSql.java:341)
at oracle.jdbc.driver.OracleSql.getSqlBytes(OracleSql.java:649)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
This is the Code section:
BeanShell script error: Sourced file: inline evaluation of: ``if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { out.print(" \ninsert int . . . '' : Typed variable declaration : Error in method invocation: Method getDataSetMin() not found in class'com.sunopsis.dwg.snpreference.SnpReferenceInterne' : at Line: 25 : in file: inline evaluation of: ``if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { out.print(" \ninsert int . . . '' : odiRef .getDataSetMin ( )
BSF info: Insert new rows at line: 0 column: columnNo
if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { out.print(" \ninsert into\t") ;
out.print(odiRef.getTable("L","TARG_NAME","A")) ;
out.print(" \n( \n\t") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \n\t") ;
out.print(odiRef.getColList(",", "[COL_NAME]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \n) \nselect\t") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \n\t") ;
out.print(odiRef.getColList(",", "[EXPRESSION]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \nfrom\t") ;
out.print(odiRef.getTable("L","INT_NAME","A")) ;
out.print(" \n") ;
} else { out.print(" \ninsert into\t") ;
out.print(odiRef.getTable("L","TARG_NAME","A")) ;
out.print(" \n( \n\t") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \n\t") ;
out.print(odiRef.getColList(",", "[COL_NAME]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \n) \n\nselect\n    ") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print("   \n ") ;
out.print(odiRef.getColList(",", "[EXPRESSION]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \nFROM (\t\n") ;
for (int i=odiRef.getDataSetMin(); i <= odiRef.getDataSetMax(); i++){out.print("\n") ;
out.print(odiRef.getDataSet(i, "Operator")) ;
out.print("\nselect \t") ;
out.print(odiRef.getPop("DISTINCT_ROWS")) ;
out.print("\n\t") ;
out.print(odiRef.getColList(i,"", "[EXPRESSION] [COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \nfrom\t") ;
out.print(odiRef.getFrom(i)) ;
out.print("\nwhere\t") ;
if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { out.print("\n\tJRN_FLAG <> 'D'\t") ;
} else {out.print("\t(1=1)\t") ;
} out.print("\n") ;
out.print(odiRef.getJoin(i)) ;
out.print("\n") ;
out.print(odiRef.getFilter(i)) ;
out.print("\n") ;
out.print(odiRef.getJrnFilter(i)) ;
out.print("\n") ;
out.print(odiRef.getGrpBy(i)) ;
out.print("\n") ;
out.print(odiRef.getHaving(i)) ;
out.print("\n") ;
}out.print("\n) ") ;
out.print(odiRef.getInfo("DEST_TAB_ALIAS_WORD")) ;
out.print(" ODI_GET_FROM\n\n") ;
} out.print("\n") ;
****** ORIGINAL TEXT ******
<%if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { %>
insert into <%=odiRef.getTable("L","TARG_NAME","A")%>
<%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[COL_NAME]", ",\n\t", "", "((INS and TRG) and REW)")%>
select <%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[EXPRESSION]", ",\n\t", "", "((INS and TRG) and REW)")%>
from <%=odiRef.getTable("L","INT_NAME","A")%>
<% } else { %>
insert into <%=odiRef.getTable("L","TARG_NAME","A")%>
<%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[COL_NAME]", ",\n\t", "", "((INS and TRG) and REW)")%>
select
    <%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[EXPRESSION]", ",\n\t", "", "((INS and TRG) and REW)")%>
FROM (
<%for (int i=odiRef.getDataSetMin(); i <= odiRef.getDataSetMax(); i++){%>
<%=odiRef.getDataSet(i, "Operator")%>
select <%=odiRef.getPop("DISTINCT_ROWS")%>
<%=odiRef.getColList(i,"", "[EXPRESSION] [COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
from <%=odiRef.getFrom(i)%>
where <% if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { %>
JRN_FLAG <> 'D' <%} else {%> (1=1) <% } %>
<%=odiRef.getJoin(i)%>
<%=odiRef.getFilter(i)%>
<%=odiRef.getJrnFilter(i)%>
<%=odiRef.getGrpBy(i)%>
<%=odiRef.getHaving(i)%>
<%}%>
) <%=odiRef.getInfo("DEST_TAB_ALIAS_WORD")%> ODI_GET_FROM
<% } %>
Any suggestions are highly appreciated.
Mike

Hi Santy,
No, no error or bad files.
Actually the data are moved correctly into the temp table created by ODI, but not from there to the final target table.
I found out the reason though, the knowledge modules imported were from another ODI installation!
I made sure to import the proper KM and it worked.
Thanks!

ODI-1228: Task emp(Integration) fails on the target ORACLE connection Target

Hi all,
I am getting error while executing interface on error. Following error occurs when i am executing interface,
ODI-1228: Task emp(Integration) fails on the target ORACLE connection Target
Caused By: java.sql.SQLException: Non Supported SQL92 token at position: 138
Your help in this regard will be highly appreciated.
Regards
Irfan

Hi all,
I am getting error while executing interface on ODI. Following error occurs when i am executing interface,
ODI-1228: Task emp(Integration) fails on the target ORACLE connection Target
Caused By: java.sql.SQLException: Non Supported SQL92 token at position: 138
Your help in this regard will be highly appreciated.
Regards
Irfan

Error to import SAP-WEC sca : integration failed

Hello there,
We are one NWDI 7.3 in CM Services.
We are meeting some difficulties to import the SAP-WEC sca file.
This sca is marked "to be developped" in the Software Definition Component.
We would like to import SAP-WEC (and SAP-WEC-FRW) with "Import sources Overwriting modifications" as actions.
But this operation has failded, we have checked the cbs log, it ends with the following message :
Integration of activities in compartment "sap.com_SAP-WEC" started at 2014-11-07 17:18:29.489 GMT
Integration of 1 activities in compartment "sap.com_SAP-WEC" finished at 2014-11-07 17:28:40.486 GMT and took 10 m 10 s 997 ms
An incomplete integration in compartment "sap.com_SAP-WEC" of buildspace "DJP" has resulted because of errors during request processing!
Request 1765 has been created to re-initialize the compartment
===== Post-Processing ===== finished at 2014-11-07 17:28:40.580 GMT and took 10 m 37 s 237 ms
Change request state from SUCCEEDED to FAILED
Error! The following problem(s) occurred during request processing:
Error! Communication error when performing integrations. Integration failed with unexpected CONFLICT status [com.sap.dtr.client.lib.protocol.entities.ErrorEntity@10b70d3e]. Request FAILED.
REQUEST PROCESSING finished at 2014-11-07 17:28:40.751 GMT and took 11 m 8 s 874 ms
We can see just at the bottom of the error message :
Synchronize metadata for [sap.com/wec/esrv/mc/servicerequest/ui] finished at 2014-11-07 17:17:42.922 GMT and took 16 ms
< CREATE > ''sap.com/wec/esrv/mc/servicerequest/ui'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcomacd/bo'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcomacd/dpu'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcomacd/md'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcomacd/ui'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcoservicerequest/bo'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcoservicerequest/dpu'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcoservicerequest/md'' DC
< IGNORE > ''sap.com/wec/esrv/mc/telcoservicerequest/ui'' DC
< IGNORE > ''sap.com/wec/examples/core/app'' DC
< IGNORE > ''sap.com/wec/examples/mc/main/md'' DC
< IGNORE > ''sap.com/wec/examples/mc/main/ui'' DC
< IGNORE > ''sap.com/wec/examples/mc/sfliadvsearch/bo'' DC
< IGNORE > ''sap.com/wec/examples/mc/sfliadvsearch/md'' DC
< IGNORE > ''sap.com/wec/examples/mc/sfliadvsearch/ui'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightcarrier/app'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightcarrier/bo'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightcarrier/cust'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightcarrier/md'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightcarrier/ui'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightconnections/bo'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightconnections/md'' DC
< IGNORE > ''sap.com/wec/examples/mc/sflightconnections/ui'' DC
< IGNORE > ''sap.com/wec/examples/sflight/app'' DC
< IGNORE > ''sap.com/wec/examples/sflight/leanapp'' DC
< IGNORE > ''sap.com/wec/examples/sflight/leanwebapp'' DC
< IGNORE > ''sap.com/wec/examples/sflight/webapp'' DC
< IGNORE > ''sap.com/wec/examples/tc/common/util'' DC
< IGNORE > ''sap.com/wec/examples/wcb/extconfig/bo'' DC
< IGNORE > ''sap.com/wec/examples/wcb/extconfig/md'' DC
< IGNORE > ''sap.com/wec/examples/wcb/extconfig/ui'' DC
< IGNORE > ''sap.com/wec/frw/mc/user'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/app'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/bo'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/common'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/dic'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/ejb'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/md'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcb/ui'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcbmain/bo'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcbmain/md'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcbmain/ui'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcf'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcf/md'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcf/ui'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/bo'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/common'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/dic'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/ejb'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/md'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/rt'' DC
< IGNORE > ''sap.com/wec/frw/mc/wcm/ui'' DC
< IGNORE > ''sap.com/wec/frw/tc/bookmarking'' DC
< IGNORE > ''sap.com/wec/frw/tc/common'' DC
< IGNORE > ''sap.com/wec/frw/tc/common/app/config'' DC
< IGNORE > ''sap.com/wec/frw/tc/common/bec/ejb'' DC
< IGNORE > ''sap.com/wec/frw/tc/common/dic'' DC
< IGNORE > ''sap.com/wec/frw/tc/common/ejb'' DC
< IGNORE > ''sap.com/wec/frw/tc/commons/lib'' DC
< IGNORE > ''sap.com/wec/frw/tc/core'' DC
< IGNORE > ''sap.com/wec/frw/tc/core/app'' DC
< IGNORE > ''sap.com/wec/frw/tc/core/includes'' DC
< IGNORE > ''sap.com/wec/frw/tc/core/jbol'' DC
< IGNORE > ''sap.com/wec/frw/tc/core/webapp'' DC
< IGNORE > ''sap.com/wec/frw/tc/dispatcher'' DC
< IGNORE > ''sap.com/wec/frw/tc/dispatcher/app'' DC
< IGNORE > ''sap.com/wec/frw/tc/dispatcher/webapp'' DC
< IGNORE > ''sap.com/wec/frw/tc/ejb3unit'' DC
< IGNORE > ''sap.com/wec/frw/tc/ejb3unit/lib'' DC
< IGNORE > ''sap.com/wec/frw/tc/facelets/lib'' DC
< IGNORE > ''sap.com/wec/frw/tc/flexbuild'' DC
< IGNORE > ''sap.com/wec/frw/tc/flexcompc'' DC
< IGNORE > ''sap.com/wec/frw/tc/flexmvc'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/moduledev/edit'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/moduledev/editor'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/plugins/xhtmleditor'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/common'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/core'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/editors'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/logging'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/modulecreation'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/selenium'' DC
< IGNORE > ''sap.com/wec/frw/tc/ide/workbench/validation'' DC
< IGNORE > ''sap.com/wec/frw/tc/ideplugin/moduledev'' DC
< IGNORE > ''sap.com/wec/frw/tc/j4fry'' DC
< IGNORE > ''sap.com/wec/frw/tc/jquery/lib'' DC
< IGNORE > ''sap.com/wec/frw/tc/jsfextensions'' DC
< IGNORE > ''sap.com/wec/frw/tc/jsfextensions/processsflow'' DC
< IGNORE > ''sap.com/wec/frw/tc/jsfflex'' DC
< IGNORE > ''sap.com/wec/frw/tc/json/lib'' DC
< IGNORE > ''sap.com/wec/frw/tc/modules'' DC
< IGNORE > ''sap.com/wec/frw/tc/modules/metadata'' DC
< IGNORE > ''sap.com/wec/frw/tc/postbuild'' DC
< IGNORE > ''sap.com/wec/frw/tc/prettyurl'' DC
< IGNORE > ''sap.com/wec/frw/tc/selenium/drivers'' DC
< IGNORE > ''sap.com/wec/frw/tc/selenium/server'' DC
< IGNORE > ''sap.com/wec/frw/tc/ui/component'' DC
< IGNORE > ''sap.com/wec/frw/tc/ui/component/cfg/bo'' DC
< IGNORE > ''sap.com/wec/frw/tc/ui/component/cfg/md'' DC
< IGNORE > ''sap.com/wec/frw/tc/ui/component/cfg/ui'' DC
< IGNORE > ''sap.com/wec/frw/tc/ui/component/template'' DC
< IGNORE > ''sap.com/wec/frw/tc/unittesting'' DC
< IGNORE > ''sap.com/wec/frw/tc/velocity/lib'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/catalog/bo'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/catalog/md'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/catalog/ui'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/main/md'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/main/ui'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/user/bo'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/user/md'' DC
< IGNORE > ''sap.com/wec/loy/comm/mc/user/ui'' DC
< IGNORE > ''sap.com/wec/loy/ecom/mc/checkout/md'' DC
< IGNORE > ''sap.com/wec/loy/ecom/mc/checkout/ui'' DC
< IGNORE > ''sap.com/wec/loy/ecom/mc/salestransactions/bo'' DC
< IGNORE > ''sap.com/wec/loy/ecom/mc/salestransactions/md'' DC
< IGNORE > ''sap.com/wec/loy/ecom/mc/salestransactions/ui'' DC
< IGNORE > ''sap.com/wec/loy/emkt/mc/campaign/bo'' DC
< IGNORE > ''sap.com/wec/loy/emkt/mc/campaign/md'' DC
< IGNORE > ''sap.com/wec/loy/emkt/mc/campaign/ui'' DC
< IGNORE > ''sap.com/wec/temp/wec/comm/mc/mdm/trans'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/catalog/bo'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/catalog/md'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/catalog/ui'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/common'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/payment/bo'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/payment/md'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/payment/ui'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/storelocator/bo'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/storelocator/md'' DC
< IGNORE > ''sap.com/wec/trade/comm/mc/storelocator/ui'' DC
< IGNORE > ''sap.com/wec/trade/dpu'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/checkout/bo'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/checkout/md'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/checkout/ui'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/salestransactions/bo'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/salestransactions/md'' DC
< IGNORE > ''sap.com/wec/trade/ecom/mc/salestransactions/ui'' DC
we have also checked the current cbs request, in fact it the activation process which always failed and the total DC for this component is still to 0.
What can we do to import the SAP-WEC sca sources ?
thank you.

Hi Jean-Yves,
Hope you are doing good.
You are right, the error is not too clear:
Error! Communication error when performing integrations. Integration failed with unexpected CONFLICT status [com.sap.dtr.client.lib.protocol.entities.ErrorEntity@10b70d3e]. Request FAILED.
REQUEST PROCESSING finished at 2014-11-07 17:28:40.751 GMT and took 11 m 8 s 874 ms
Kindly run the web diag tool as outlined in SAP Note No. 1227928: Diagtool for troubleshooting NWDI (detailed logs) and reproduce the issue. Also add in the locations:
com.sap.tc.cbs.server.proc.impl
com.sap.dtr.client.lib.protocol.entities
This should have more details on the error.
Thank you!
Kind Regards,
Hemanth
SAP AGS

Renew SSL key fail in WL Server

We need to renew our certificate in the production environment. The new key is 2048 bit encrypted. When importing it to the keystore with "NO" password protection on the private key, the server ssl works fine. When I encrypt the file using wlkeytool and then importing it to the keystore the ssl fails with the following error:
The public key from the configured server certificate and the configured server private key do not match.
Any idea how I can encrypt the private key prior to importing it to the keystore?

This thread has replies in the WLS Security forum and I recommend those interested with follow-up look there:
SSLKeyException

BHOLD FIM Integration Fails on Database Configuration

Gentlemen,
I hope you are familiar with BHOLD FIM Integration because i'm having a headache trying to install it.
FIM Service installed successful and so BHOLD Core. However, when i tried to install BHOLD FIM Integration and logged the error and can see this exception:
The property 'DatabaseFile' was found with value 'C:\Program Files (x86)\BHOLD\FIM\Database Files\BholdFIMServices.xml'
The property 'SqlConnectionString' was found with value ''
Exception thrown by custom action:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Data.SqlClient.SqlException: Login failed for user 'ADSTEST\FIM-Admin1'.
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
   at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject, Boolean withFailover)
   at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
   at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Bhold.DatabaseUpdater.Schema.DbSchema.Parse(String connectionString)
   at DBUpgraderCA.CustomActions.UpgradeDB(Session session)
   --- End of inner exception stack trace ---
Do you have any idea why this is happening and how to fix it ?
Majd

It looks like the user does not have a SQL login. Try installing as a sysadmin. Make sure you follow the instructions here:
http://technet.microsoft.com/en-us/library/jj134093(v=ws.10).aspx. I went through it just recently with the latest version of BHOLD.

Weblogic Integration failed to build Cluster ENV

Dear buddies,
I have used WL for months, WLS works pretty good with cluster support. but I failed to create WLI cluster.could you guys give me a hand and tell me how to create an WLI cluster?Thanks a lot!!!
Here is the process how I created WLI cluster:
ENV:RedHat9+ WL8.1_SP4
Machine: 172.16.4.238(adminServer), 172.16.4.237/236(236/237 are in the same physical machine, one Network interface card listen to two ip address)
BEA_HOME=/opt/bea/
1.executed /opt/bea/weblogic81/common/bin/config.sh on 172.16.4.238 and create an admin server(cgServer,172.16.4.238:7001) and a cluster(TestCluster) inclued two managedServers(mServer1/172.16.4.236:7001,mServer2/172.16.4.237:7001)
and I didn't create extra JDBC POOL except the standard one.
2. I exectued same command on 172.16.4.236,create an admin Server(mServer1) and a cluster(TestCluster)with mServer2 included. and the other settings are just same as step1.
Now I am having following problem.
1.admin Server(cgServer) can startup without any problem
2.mServers (mServer1 and mServer2)can't start up(detail output pasted later) it seems pointbase didn't start up correctly on port 9093
3.so I start up point base on mServers machine with command "/opt/bea/weblogic81/common/eval/pointbase/tools/startPointBase.sh"
but seems the pointbase only listen 9092!!
4.I can't even startup adminserver and pointbase DB with Jrockit, but Sun's JVM seems works.
below are detailed output when I startManagedServers:
command:
[root@localhost integration]# ./startManagedWebLogic.sh mServer1 http://172.16.4.238:7001
####<Dec 27, 2005 2:12:05 PM EST> <Notice> <Log Management> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-170019> <The server log file /opt/bea/user_projects/domains/integration/mServer1/mServer1.log is opened. All server side log events will be written to this file.>
####<Dec 27, 2005 2:12:05 PM EST> <Info> <Socket> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000415> <System has file descriptor limits of - soft: 1,024, hard: 1,024>
####<Dec 27, 2005 2:12:05 PM EST> <Info> <Socket> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000416> <Using effective file descriptor limit of: 1,024 open sockets/files.>
####<Dec 27, 2005 2:12:05 PM EST> <Info> <Socket> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000406> <PosixSocketMuxer was built on May 22 2003 15:43:24>
####<Dec 27, 2005 2:12:06 PM EST> <Info> <Socket> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000436> <Allocating 3 reader threads.>
####<Dec 27, 2005 2:12:06 PM EST> <Info> <Socket> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000440> <NativeIO Enabled>
####<Dec 27, 2005 2:12:14 PM EST> <Info> <Security> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server mServer1 for security realm myrealm.>
####<Dec 27, 2005 2:12:14 PM EST> <Notice> <Security> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-090082> <Security initializing using security realm myrealm.>
####<Dec 27, 2005 2:12:14 PM EST> <Notice> <WebLogicServer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000328> <Starting WebLogic Managed Server "mServer1" for domain "integration">
####<Dec 27, 2005 2:12:14 PM EST> <Info> <WebLogicServer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000214> <WebLogic Server "mServer1" version:
WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Integration 8.1 SP4 Tue Nov 30 10:34:16 PST 2004 471877 (c) 1995, 1996, 1997, 1998 WebLogic, Inc.
(c) 1999, 2000, 2001 BEA Systems, Inc.>
####<Dec 27, 2005 2:12:14 PM EST> <Info> <WebLogicServer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000215> <Loaded License : /opt/bea/license.bea>
####<Dec 27, 2005 2:12:14 PM EST> <Info> <RJVM> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000570> <Network Configuration for Channel "mServer1"
Listen Address          172.16.4.236:7001
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Dec 27, 2005 2:12:14 PM EST> <Debug> <RJVM> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000571> <Network Configuration Detail for Channel "mServer1"
Channel Weight          50
Accept Backlog          50
Login Timeout          5000ms
Max Message Size     10000000
Message Timeout     60s
Idle Timeout          65s
Tunneling Timeout     40s
Tunneling Ping          45s>
####<Dec 27, 2005 2:12:17 PM EST> <Info> <XML> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-130036> <Initializing XMLRegistry.>
####<Dec 27, 2005 2:12:17 PM EST> <Info> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001135> <Initializing the JDBC service.>
####<Dec 27, 2005 2:12:18 PM EST> <Info> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001137> <Initialization complete.>
####<Dec 27, 2005 2:12:18 PM EST> <Info> <Connector> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-190000> <Initializing J2EE Connector Service>
####<Dec 27, 2005 2:12:18 PM EST> <Info> <Connector> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-190001> <J2EE Connector Service initialized successfully>
####<Dec 27, 2005 2:12:18 PM EST> <Info> <IIOP> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-002014> <IIOP subsystem enabled.>
####<Dec 27, 2005 2:12:19 PM EST> <Info> <JMS> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-040090> <Deployed 5 default connection factories.>
####<Dec 27, 2005 2:12:19 PM EST> <Info> <JMS> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-040305> <JMS service is initialized and in standby mode.>
####<Dec 27, 2005 2:12:19 PM EST> <Info> <HTTP> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-101128> <Initializing HTTP services.>
####<Dec 27, 2005 2:12:19 PM EST> <Info> <HTTP> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-101133> <Initializing Web server mServer1.>
####<Dec 27, 2005 2:12:19 PM EST> <Info> <HTTP> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-101052> <[HTTP mServer1] Initialized>
####<Dec 27, 2005 2:12:19 PM EST> <Info> <HTTP> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-101135> <mServer1 is the default Web server.>
####<Dec 27, 2005 2:12:21 PM EST> <Info> <J2EE> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-160037> <J2EE service initializing.>
####<Dec 27, 2005 2:12:21 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149207> <Initializing.>
####<Dec 27, 2005 2:12:23 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149059> <Module uddi of application uddi is transitioning from unprepared to prepared on server mServer1.>
####<Dec 27, 2005 2:12:24 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149060> <Module uddi of application uddi successfully transitioned from unprepared to prepared on server mServer1.>
####<Dec 27, 2005 2:12:24 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149059> <Module uddiexplorer of application uddiexplorer is transitioning from unprepared to prepared on server mServer1.>
####<Dec 27, 2005 2:12:24 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149060> <Module uddiexplorer of application uddiexplorer successfully transitioned from unprepared to prepared on server mServer1.>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149059> <Module wl_management_internal1 of application wl_management_internal1 is transitioning from unprepared to prepared on server mServer1.>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149060> <Module wl_management_internal1 of application wl_management_internal1 successfully transitioned from unprepared to prepared on server mServer1.>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149059> <Module uddi of application uddi is transitioning from prepared to active on server mServer1.>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149060> <Module uddi of application uddi successfully transitioned from prepared to active on server mServer1.>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <HTTP> <localhost.localdomain> <mServer1> <main> <<anonymous>> <> <BEA-101047> <[ServletContext(id=20975280,name=uddi,context-path=/uddi)] WebServiceServlet: init>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149059> <Module uddiexplorer of application uddiexplorer is transitioning from prepared to active on server mServer1.>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149060> <Module uddiexplorer of application uddiexplorer successfully transitioned from prepared to active on server mServer1.>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <HTTP> <localhost.localdomain> <mServer1> <main> <<anonymous>> <> <BEA-101047> <[ServletContext(id=23108345,name=uddiexplorer,context-path=/uddiexplorer)] WebServiceServlet: init>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149059> <Module wl_management_internal1 of application wl_management_internal1 is transitioning from prepared to active on server mServer1.>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149060> <Module wl_management_internal1 of application wl_management_internal1 successfully transitioned from prepared to active on server mServer1.>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <HTTP> <localhost.localdomain> <mServer1> <main> <<anonymous>> <> <BEA-101047> <[ServletContext(id=13608238,name=wl_management_internal1,context-path=/wl_management_internal1)] WebServiceServlet: init>
####<Dec 27, 2005 2:12:25 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149208> <Initialization Complete.>
####<Dec 27, 2005 2:12:25 PM EST> <Notice> <Cluster> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000138> <Listening for announcements from cluster TestCluster on 237.0.0.1:7001.>
####<Dec 27, 2005 2:12:25 PM EST> <Notice> <Cluster> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000133> <Waiting to synchronize with other running members of TestCluster.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <JTA> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-110441> <Opening transaction log with driver version "j1.0" and synchronous write policy "Cache-Flush". For information on synchronous write policies, refer to the weblogic.management.configuration.ServerMBean javadoc or console online help.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001138> <Resuming the JDBC service.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001140> <Resume complete.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <JMS> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-040108> <User connection factory "DefaultXAConnectionFactory" is started.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <JMS> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-040108> <User connection factory "QueueConnectionFactory" is started.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <JMS> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-040108> <User connection factory "MessageDrivenBeanConnectionFactory" is started.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <JMS> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-040108> <User connection factory "DefaultConnectionFactory" is started.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <JMS> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-040108> <User connection factory "TopicConnectionFactory" is started.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <JMS> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-040306> <JMS service is active now.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <HTTP> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-101129> <Initializing the Web application container.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <HTTP> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-101238> <HTTP log rotation is size based for the Web server: mServer1.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <HTTP> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-101051> <[HTTP mServer1] started>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <WebService> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <WebService> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-220027> <Web Service reliable agents are started on the server.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <Deployer> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-149209> <Resuming.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001177> <Creating Connection Pool named bpmArchPool, URL = jdbc:pointbase:server://localhost:9093/workshop, Properties = {user=weblogic}.>
####<Dec 27, 2005 2:12:56 PM EST> <Info> <Common> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-000625> <The application has disabled periodic testing of free resources in pool "bpmArchPool".>
####<Dec 27, 2005 2:12:57 PM EST> <Warning> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001129> <Received exception while creating connection for pool "bpmArchPool": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>
####<Dec 27, 2005 2:12:57 PM EST> <Info> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001156> <Stack trace associated with message 001129 follows:
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.
     at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
     at com.pointbase.net.netJDBCConnection.<init>(Unknown Source)
     at com.pointbase.net.netJDBCDriver.getConnection(Unknown Source)
     at com.pointbase.net.netJDBCDriver.connect(Unknown Source)
     at com.pointbase.jdbc.jdbcUniversalDriver.getConnection(Unknown Source)
     at com.pointbase.jdbc.jdbcUniversalDriver.connect(Unknown Source)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:189)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:124)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1145)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1079)
     at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:171)
     at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1018)
     at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:142)
     at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:306)
     at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:180)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:337)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:597)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:575)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:241)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:754)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:733)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:509)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
     at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
     at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
     at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerMBean_Stub.java:7691)
     at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:1304)
     at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:347)
     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
     at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
     at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
     at weblogic.Server.main(Server.java:32)
>
####<Dec 27, 2005 2:12:58 PM EST> <Warning> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001129> <Received exception while creating connection for pool "bpmArchPool": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>
####<Dec 27, 2005 2:12:58 PM EST> <Info> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001156> <Stack trace associated with message 001129 follows:
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.
     at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
     at com.pointbase.net.netJDBCConnection.<init>(Unknown Source)
     at com.pointbase.net.netJDBCDriver.getConnection(Unknown Source)
     at com.pointbase.net.netJDBCDriver.connect(Unknown Source)
     at com.pointbase.jdbc.jdbcUniversalDriver.getConnection(Unknown Source)
     at com.pointbase.jdbc.jdbcUniversalDriver.connect(Unknown Source)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:189)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:124)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1145)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1079)
     at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:171)
     at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1018)
     at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:142)
     at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:306)
     at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:180)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:337)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:597)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:575)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:241)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:754)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:733)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:509)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
     at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
     at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
     at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerMBean_Stub.java:7691)
     at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:1304)
     at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:347)
     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
     at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
     at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
     at weblogic.Server.main(Server.java:32)
>
####<Dec 27, 2005 2:12:59 PM EST> <Warning> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001129> <Received exception while creating connection for pool "bpmArchPool": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>
####<Dec 27, 2005 2:12:59 PM EST> <Info> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001156> <Stack trace associated with message 001129 follows:
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.
     at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
     at com.pointbase.net.netJDBCConnection.<init>(Unknown Source)
     at com.pointbase.net.netJDBCDriver.getConnection(Unknown Source)
     at com.pointbase.net.netJDBCDriver.connect(Unknown Source)
     at com.pointbase.jdbc.jdbcUniversalDriver.getConnection(Unknown Source)
     at com.pointbase.jdbc.jdbcUniversalDriver.connect(Unknown Source)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:189)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:124)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1145)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1079)
     at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:171)
     at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1018)
     at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:142)
     at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:306)
     at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:180)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:337)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:597)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:575)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:241)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:754)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:733)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:509)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
     at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
     at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
     at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerMBean_Stub.java:7691)
     at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:1304)
     at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:347)
     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
     at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
     at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
     at weblogic.Server.main(Server.java:32)
>
####<Dec 27, 2005 2:13:00 PM EST> <Warning> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001129> <Received exception while creating connection for pool "bpmArchPool": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>
####<Dec 27, 2005 2:13:00 PM EST> <Info> <JDBC> <localhost.localdomain> <mServer1> <main> <<WLS Kernel>> <> <BEA-001156> <Stack trace associated with message 001129 follows:
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.
     at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
     at com.pointbase.net.netJDBCConnection.<init>(Unknown Source)
     at com.pointbase.net.netJDBCDriver.getConnection(Unknown Source)
     at com.pointbase.net.netJDBCDriver.connect(Unknown Source)
     at com.pointbase.jdbc.jdbcUniversalDriver.getConnection(Unknown Source)
     at com.pointbase.jdbc.jdbcUniversalDriver.connect(Unknown Source)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:189)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:124)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1145)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1079)
     at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:171)
     at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1018)
     at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:142)
     at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:306)
     at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:180)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:337)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:597)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:575)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:241)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:754)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:733)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:509)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
     at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
     at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
     at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerMBean_Stub.java:7691)
     at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:1304)
     at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:347)
     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
     at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)

Since a couple of days we see the same in our project. Same release. It started when we added versioning to our ~140 processes. A hint would be great. We too didn't find anything helpful on the web.

Metadata Integrator failing to run

Hi,
I am unable to make Metadata Integrator connect with CMS and after copying some libraries (just for testing purposes) I found that though the connectiong is being made still while running the Metadata Integrator job its failing reporting the error "An error occurred while retrieving the file cmsCollector.cmd".
Please advice.
Thanks and Regards,
Gourav

Hi,
I am unable to make Metadata Integrator connect with CMS and after copying some libraries (just for testing purposes) I found that though the connectiong is being made still while running the Metadata Integrator job its failing reporting the error "An error occurred while retrieving the file cmsCollector.cmd".
Please advice.
Thanks and Regards,
Gourav

Error in MDM - EP integration : "Failed to connect to MDM server. ....."

Dear SDN,
I m in middle of configuring the MDM and EP integration.
<u>EP Version Info :</u>
J2EE Engine 6.40 PatchLevel 108290.313
Portal 6.0.20.0.0
BP has been installed.
We are able to view MDM system and MDM search IViews in the Wizards in the portal.
<u>MDM Version Info</u> : MDM 5.5 SP 04
I come across the following error :
<b>Step 4: An error has occurred
Failed to connect to MDM server. Check your system. The server may be down or there may be an error in one or more of your system parameters.</b>
System parameters are Server name and pwd .
This parameters are used to start the server and pwd for accessing the server while mounting the server.
Also at the same time, my MDM server is running and repository is shown loaded and running.
Kindly suggest what should have been missed out from our side or some way we can make sure that error does not occur.
Please help.
Regards,
Chandani Shah.

Hi Chandani,
in Portal clik on Personalization, and in User Mapping you need to map the MDM repository user (may be Admin)..... then try another time.
Please, check the BP version in order to unserstand if it is the rigjt version for your MDM.
Hoper this help you.
Regards,
Vito

2012 r2 Essentials on premises Exchange 2013 integration failing

I have a new server in my development environment that I have installed Essentials and Exchange 2013 on with all of the latest updates. After getting Exchange 2013 installed I am unable to successfully run the Exchange Integration wizard. It fails saying
that it can't contact the exchange server.
I am able to access the Exchange Powershell, Exchange Admin center and OWA.
The Essentials Anywere Access has been setup and Is working as well.
any suggestions on where to go from here?

Hi,
-->It fails saying that it can't contact the exchange server.
Can you ping the exchange server via server name and IP address? In addition, did you apply
Cumulative Update 5 for Exchange Server 2013 and reboot the Exchange server, then monitor the result? Just a confirmation, thanks for your understanding.
Please also refer to following article and check if can help you.
Integrate an On-Premises Exchange Server with Windows Server Essentials
In addition, if this issue still exists, please follow the path:
%programdata%\Microsoft\Windows Server\Logs and check log files if find more clues.
Windows Server Essentials 2012/2012 R2 Log Files
If any update, please feel free to let me know,
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Check up on hard drive/file integrity (failing hard drives)

Hi
The only tool I have found for monitoring hard drive health is SMARTreporter[1]. Unfortunately, S.M.A.R.T. status isn’t supported by USB 2 and Apple haven’t implemented support for it for FireWire drives. So this app is useless.
How can I monitor hard drive integrity? I want a daemon that monitors my external drives and can notify me when sectors become unreadable/my files start getting corrupted.
Please advise.
1. http://www.corecode.at/smartreporter/

There is no such animal. The only information available from a hard drive is through SMART. You can use Disk Utility to repair a drive, verify a drive, and repair permissions.
Even SMART can only report information that tells if a drive is failing after the fact. You cannot know if a drive is going to fail only that it has failed. At best SMART may report that a drive is fine, yet the drive will fail because SMART gives a false positive. It's far from ideal. If SMART reports that a drive is failing there's a pretty good chance it is failing. False negatives are less likely than false positives.
If you want to avoid losing data from a drive failure then backup frequently and make multiple backups. This is your only reliable protection agains file corruption or drive failure.

Flash Builder 4.5.0 / 4.5.1 - Blackberry OS SDK Integration Fails

Hi All ,
I was keen in the Blackberry simulator which supports Gestures & Swipe events in the Laptop.
I have installed Flash Builder 4.5.1
I downloaded the latest BlackberryOS SDK dmg for Air.
When I run the BlackBerry SDK set up , It starts fine and It ask for Integration with Flash Builder , I select Yes and In my Laptop the Flash Builder installation folder is in default location , The same Location also pointed by Blackberry Installer , When I contine , It says Invalid Directory please select Adobe Flash Builder Installation Folder.
I tried a lot and Got tired , Also many of them also facing the same issue .
Any help would be appreciated.
Thanks,
Satish

This forum is specific to the Flex SDK. You might find more help from posting in the Flash Builder forum: http://forums.adobe.com/community/flash_builder

On Premises Exchange Integration fails

Thru a series of misfortunate circumstances I have acquired a client that had either botched (or had another do the botching) of a Essentials\Exchange (in a VM environment) config, Essentials is running okay and Exchange is running okay except the part where
on premises integration is performed.
I've gone through the standard setup checklist (Integrate an on-premise Exchange Server with Windows Server Essentials 2012
http://technet.microsoft.com/library/jj200172 ) and even tested enabling and disabling and re-enabling on my home lab setup without error;
What I know so far
there seems to have been multiple attempts at adding an Exchange Server or they decided on version upgrades (I found leftover server names in ADSI)
there is no logging of the why or reason on the Wizard failures (there is very very little documentation on the back end of this feature) the Error message is sadly lacking in any descriptive message
I have dug down to the OPEIntegration configs but there is little guidance there as well, searching the registry has yielded no results
I think, but am not sure of, an Original 2 server deployment of essentials and Exchange (probably 2010) was initially deployed when 2013 was released they tried a deployment on a new VM thinking that other then the uninstall little else had to be done.
Exchange seems to be working (had to delete/recreate some users for inconsistent mailbox errors) creating mailboxes in Exchange and not through the Essentials interface, users are sending and receiving mail
More docs on the backend processes for essentials would be nice I love SBS but lets face it some of the ALL in One stuff is badly documented getting the linked "find out more about this error" pages updated would be nice.....

Geoff,
When the switch from 2010 to 2013 happened, were the two server's names made the same?
Exchange makes AD changes. Those changes are specific to the Exchange server version.
Here's an overview of the removal process in an SBS Migration:
http://blog.mpecsinc.ca/2011/07/sbs-2003-to-sbs-2011-migration-exchange.html
And:
http://www.msexchange.org/tutorials/Remove-Exchange-server-entire-Exchange-organization.html
Exchange 2010:
http://social.technet.microsoft.com/Forums/en/exchange2010/thread/d058717e-bf70-4449-91c2-fa00b47d415f
Exchange 2010 Nuke & Pave:
http://www.itbigbang.com/how-to-manually-uninstall-last-exchange-2010-server-from-organization/
Note that these links are not intended for you to R&R the current Exchange setup but to provide some insight into where the hooks may be for E2010.
While the current operational environment may not be optimal, it does work ... at least for now. ;) One never knows if a patch will come down the pipe and blow everything up due to it's broken state.
Now, as for Essentials and its ties into Exchange, one option would be to use the Swing Migration method to swing the AD out and back again onto a fresh Essentials install. This might be best to practice run at it just to make sure. But, given Essentials
is a fairly simple migration off and back on again you may find the results you need.
Philip
Philip Elder SBS MVP Blog: http://blog.mpecsinc.ca

HR Renewal - PAOM Integration fail

Similar Messages

Maybe you are looking for