HRTRV_IF_MODIFY_TRIP? documentation on this function module
Hi,
I am looking for documentation on this function module. I am working T&E project. So if there is any provide documentation on this.
Thanks.
- Deepan
Hi,
The system tries to read a valid trip schema in table T706S and no relevant entry found.
Sujay
PS: Please don't post all bold
Edited by: Sujay Venkateswaran Krishnakumar on Oct 15, 2010 4:54 PM
Similar Messages
-
Documentation about this function module
ineed Documentation about this function module RP_ANSAL_FROM_PERNR
Hi Avinash,
Have a look at the function group program documentation.It gives an idea of what the function module does.
Short text
Annual Salary Functionality (ANSAL)
Description
This function group contains different functionality for calculating the annual salary, and calculating a period salary from the annual salary.
The function group evaluates different tables and features:
Tables
T503 defines whether an employee is paid on an
hourly basis or per period
T510W defines the time unit
T511 determines the relevant module from the annual
salary wage type, rounding, etc.
T539J defines the valid wage types for calculating
the annual salary
Features
ANSAL defines the annual salary wage type
PFREQ number of periods per year
Old U510F -> use T510F ?
Thanks
Lakshman -
hi,
can anyone explain the use of this function module, i coudn't find any documentation .
This function module prints the data selected in selection screen.. but i want a breif explanation y we use this and wat for is this....
FM_SELECTION_CRITERIA_PRINTHi,
1. Suppose the requirement is to know the parameters/select-options selected on the selection screen, on the list output (report).
Because once we are on the report output , we wouldnt know the selection parameters made. The only way is to go back & check. Instead of going back we can use this FM to know even when we are on the o/p.
2. Also to take a print of both the report output& selection parameters.
Reward if useful.
Thanks
SMS -
Documentation of the function module RSC1_ZDD_REPLAY_SET
I am looking for the documentation of the function module RSC1_ZDD_REPLAY_SET but could not find it in any language.
I am not a ABAP person so I am not familiar with ABAP, but I want to know what this functiond module does so I tried to look for a documentation, but could not.
Does anyone have any information on this function module?
Thanks.Thanks for the document.
I think this is what I was looking for.
So, the function module is used to transfer the monitor information that was collected in the mirror system in the scenario of to minimize the downtime for delta initialization.
Even though it is an old document, it looks like that this is also applicable to the BW release greater than 2.0B.
Thanks so much. -
Hi Friends
I am having performance issue for this function-module(HR_TIM_REPORT_ABSENCE_DATA) and one my client got over 8 thousend employees . This function-module taking forever to read the data. is there any other function-module to read the absences data IT2001 .
I did use like this .if i take out this F.M 'HR_TIM_REPORT_ABSENCE_DATA_INI' its not working other Function-module.please Suggest me .
call function 'HR_TIM_REPORT_ABSENCE_DATA_INI'
exporting "Publishing to global memory
option_string = option_s "string of sel org fields
trig_string = trig_s "string of req data
alemp_flag = sw_alemp "all employee req
infot_flag = space "split per IT neccessary
sel_modus = sw_apa
importing
org_num = fdpos_lines "number of sel org fields
tables
fieldtab = fdtab "all org fields
field_sel = fieldnametab_m. "sel org fields
To Read all infotypes from Absences type.
RP_READ_ALL_TIME_ITY PN-BEGDA PN-ENDDA.
central function unit to provide internal tables: abse orgs empl
call function 'HR_TIM_REPORT_ABSENCE_DATA'
exporting
pernr = pernr-pernr
begda = pn-begda
endda = pn-endda
IMPORTING
SUBRC = SUBRC_RTA
tables
absences = absences_01
org_fields = orgs
emp_fields = empl
REFTAB =
APLTAB =
awart_sel_p = awart_s[]
awart_sel_a = awart_s[]
abstp_sel = abstp_s[]
i0000 = p0000
i0001 = p0001
i0002 = p0002
i0007 = p0007
i2001 = p2001
i2002 = p2002
i2003 = p2003.
Thanks & Regards
Reddyguessing will not help you much, check with SE30 to get a better insight
SE30
The ABAP Runtime Trace (SE30) - Quick and Easy
what is the total time, what are the Top 10 in the hitlist.
Siegfried -
How can i use this function module
Hai
How can i use this function module /SAPHT/SALES_ORDER_READ, already apply the some parameters in this function module, but it shows the error , please tell me, how to declare the parameters in this function module ,
thanks
neelimaHi
For a particular sales order,you have to pass the order number and the item number in the sales order.
It will display the rest of the values which u can capture them using internal tables.
Regards,
Vishwa. -
How to use this function module on abap hr GET_PDSNR_RANGE
how to use this function module on abap hr GET_PDSNR_RANGE
thankx.PASS INETRNAL TABLE WITH SOME DATA TO TABELLE FOR GENERATING PDSNR SEQUENCE
-
How to make this function module as RFC to get data from different system?
Hi
I am trying to use following function module . This function module is used to copy data from one cube to another cube within same system however I need a this should happen across two different system. How can I use this function module to make it remote call to different system and do the same function what it is doing ?
Name of function module -
RSDRT_INFOCUBE_DATA_COPY
Any help would be really helpful
AGHI,
let us say you want to copy the data of a cube in system A to a cube in system B .
1) create a RFC function module in system B (in this function module call the function module RSDRI_CUBE_WRITE_PACKAGE to update the data), this RFC function module should have same parametersa as RSDRI_CUBE_WRITE_PACKAGE .
2) write a program in system A .. read the data from the infocube using the function module RSDRI_INFOPROV_READ and call the RFC function module in system B that you have created..
for the details of the parameters to pass to these two function modules use the RSDRT_INFOCUBE_DATA_COPY and get the required code
Thanks
mahesh -
Use of this functional module HR_EMPLOYEE_ENQUEUE
what is use of this function module HR_EMPLOYEE_ENQUEUE.
thanks in advanced.before doing the changes in EMP records ,first u have to Lock the PERNR then only SAP will allow u do the changes.
ENQUEUE is nothing but a lock.
Regards
Prabhu -
Whether this function module K_DOCUMENT_UPDATE can send IDOC to Non SAP Sys
Hi,
I know function Module K_DOCUMENT_UPDATE can sent IDOC to R/3 systems.
1.Whether this function module can sent the IDOC to Non SAP System?.
2.How to make sure, that the function module can sent IDOC to Non SAP System?.
Please advise.Thanks.
Regards,
DineshHi Dinesh,
Inside this function module K_DOCUMENT_UPDATE there is a FM available
CALL FUNCTION 'K_DOCUMENT_SEND'
EXPORTING
I_LOGSYS = LOGSYSTEM
I_COBK = COBK
TABLES
T_COEP = LT_COEP
T_COEPL = LT_COEPL
EXCEPTIONS
This FM is responsible to send IDOCs to the defined logical system LOGSYSTEM. No matter this logica; system is SAP or non-SAP IDOC will be sent. Prerequisite are,
1) RFC connection exist between system
2) Partner profile is configured between the system.
Regards
Ram -
How to add "CC" field in this function module SO_NEW_DOCUMENT_SEND_API1
Hi,
I have a receiver field in this function module SO_NEW_DOCUMENT_SEND_API1.
But i wanted to add a CC field also to this.. How do i do it???
Thanks & regards,
Aswinwhen you add the receiver entry in the receivers table, just make the parameter copy as 'X'. This will put the receiver in CC.
And if you want to put it in BCC use the parameter Blind copy.
Regards,
Lalit Mohan Gupta -
What is this function module used for? -QKRT_MEAN_VALUE_SHEWHART
What is this function module used for? What does a K-factor mean?
What is this function module used for? What does a K-factor mean?
-
BM_FUNCTION_RANGE_F4 - More details on this function module
Hi,
Please anyone let me know how to retrieve the components data from this function module rather than display the components.
Otherwise is there any function module which only retrieve components data but not displaying .Hi,
Use this FM : BM_EU_TREE_CONSTRUCT and get the data from Tables nodetab of FM.
Regards,
Srini. -
Why we use this function module
Hi
why we use this function module 'LIST_TO_ASCI'.
regards,
sivakumarhi,
using LIST_TO_ASCI you can get the list in TEXT format, but this will be with all the formatting you have done in your list, it wont be just field names and its values.
check this sample code.....
DATA BEGIN OF itab_list OCCURS 0.
INCLUDE STRUCTURE abaplist.
DATA END OF itab_list.
DATA: BEGIN OF vlist OCCURS 0,
filler1(01) TYPE c,
field1(06) TYPE c,
filler(08) TYPE c,
field2(10) TYPE c,
filler3(01) TYPE c,
field3(10) TYPE c,
filler4(01) TYPE c,
field4(3) TYPE c,
filler5(02) TYPE c,
field5(15) TYPE c,
filler6(02) TYPE c,
field6(30) TYPE c,
filler7(43) TYPE c,
field7(10) TYPE c,
END OF vlist.
SUBMIT zreport EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = itab_list
EXCEPTIONS
not_found = 4
OTHERS = 8.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
list_index = -1
TABLES
listasci = vlist
listobject = itab_list
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.
~~Guduri -
Older version of this function module
hii all-
i want to use this function module 'F4IF_INT_TABLE_VALUE_REQUEST' , but this doesnt exist in my version of SAP. Can anyone tell me whats the older version name for this functionmodule.
or any other function module exists with this functionalityuse any of these
HELP_VALUES_GET_AND_RETURN_TAB
HELP_VALUES_GET_RETURN_VALUES
HELP_VALUES_GET_NO_DD_NAME
HELP_VALUES_GET_WITH_DD_NAME
HELP_VALUES_GET_WITH_DD_TABLE
HELP_VALUES_GET_WITH_TABLE
HELP_VALUES_GET_WITH_TABLE_EXT
Maybe you are looking for
-
I am using Acrobat Pro 8.1.5 on a Vista machine. It has been working fine until the last week or so. When I attempt to print to the Acrobat print driver, I get an "Invalid" error. I also seem to have grown five additional duplicate drivers, none of w
-
Using WRT54G as a access point.
I have two WRT54G's and have the internet connected to one of them. I am trying to use the second as an access point, but I haven't been able to figure out how to connect them. I dont have the option of running a cable. Anyone know how to get it to w
-
The Document's size and its limitation
What is the max size of width and height in all measurement (Points, Picas, Inches, Milimeters, Centimeters, Pixels) when you create a new document? I would like it to use it together with cartesian coordinate system and ruler. My request is to have
-
BLuuuury DVD. Bummed - would love help!
I have a slide/show interlaced with some video clips. I have Mac OS X 10.8.5 3.4 Ghz, 32 GB ram Profject settings : HD1080i, 29.97 frames per second Fileds, upper filed first Capture Fomat HDV Video Render : Maximum bit dpth and Oprimize stills check
-
IBook RAM unrecognized - how much gold showing?
Hi, I know this is a question you've probably answered, and I've seen plenty of posts here about RAM not being recognized, but after installing a 512 MB 266DDR PC2100 SODIMM into the RAM slot, how much gold should you see? I can't tell from the pictu