HT1222 I'm trying to connect my new 4S phone to my pc. What do I have to do?
I'm trying to connect my new 4s phone to my pc for the first time and I don't know why the pc does not see it. What do I do?
More details about the PC, please:
What operating system is it running?
What version of that operating system?
When were patches and updates last applied to that operating system?
What kind of PC is it (i.e. Lenovo, HP, Dell, etc.)?
How long have you had the PC?
Have you tried another USB port on the PC?
Similar Messages
-
I have tried to connect the new mac to an existing time capsule both directly through ethernet and through wifi. Both times I get Internet connection OK but Airport Utility is stuck searching for the base station. I have two existing macs which are connected fine and have both been backing up quite happily. The first two macs are the same user (me) and the new one is for a different user in the house. All the macs are running Mavericks.
I have tried rebooting the time capsule and the new mac - didn't help.
Any information as to what I can try would be most welcome.
Many thanksHi All
I have solved my problem! It was the old chestnut the firewall issue. We have McAfee firewalls on our machines and the wifi network was set up as a public rather than a home network. I changed it to Home or Work and het presto the time capsule appeared. I didn't have this problem with the other machines at all.
I hope this helps someone!! -
Trying to connect my new Apple TV to my Samsung flatscreen TV with a Belkin HDMI cable. Screen is blinking menu is there and can be accesed with the remote, but can be seen for one sec.
Changed the cable and its working.
-
Trying to connect my new Apple TV to the wireless network. When I try to use the remote the Apple Tv doesn't respond ( doesn't go to the next screen). Could this be caused by a weak wireless signal?
It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks -
Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.
If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
Post back on your results. -
I am trying to connect a new ipad air to my home wifi network. The ipad sees the network, asks for a password but will not connect. Password and network are good.
Hi there sibisjo,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
-Griff W. -
I am trying to connect my new ipad to my BT Home Hub but keep getting a message saying that I am unable to join the Home Hub network. Any advice?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported
Note that iWork for iCloud is only designed for PCs and Macs > http://support.apple.com/kb/HT5779
To access to your iWork documents on the iPhone, install Keynote, Numbers or Pages from the App Store -
i'm trying to access my new icloud email acct from my mac. I have OS 10.6.8 and have just completed a software update. But still not seeing how to install my icloud acct...?
You must upgrade your OSX to Lion (10.7) minimum, Mavericks (10.9) preferably.
-
Am trying to connect my icloud to my outlook account. Icloud says I have two versions of Outlook running. I installed Outlook 2013 but Outlook 2010 is a trial version and I can't seem to be able to delete it without deleting all of Windows Office 2010
You will have to remove one of the two versions, which one is your choice.
-
ı couldt manage to download iOS 5.1 Software Update . system trying to connect to server but download don't start , what would be reason?
download with itunes, or with one of your devices, and re-try, most causes it the update server it self.
-
When I start downloading apps on creative cloud with windows 7 professional 64 bit, Creative cloud blanks out and stays blank til I re-start the program. I have tried re-installing it and deleting the OMP file. What do I have to do to be able to install apps?
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
I updated my iphone4 to the 7.0.4 update. on my phone screen it says connect to itunes. when i connect to itunes my phone isnt doing anything. what do i do? i cannot use my phone!!!
Hey vsu16,
Does iTunes recognize your iPhone at all? It sounds like this is the image you're seeing on your screen to connect your phone to iTunes:
If that looks right, you'll want to follow along with the steps in here;
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
Welcome to Apple Support Communities!
Best,
Delgadoh -
Trying to connect to new network
How can I set it up so that a general user can connect to a new network?
Right now my macbook pro requires an admin password before connecting to a new wifi network. In other words when a user that is not an admin tries to connect to a new wifi network the pop up displays indicating that it is locked and an admin password is required.
Is there a way to remove this restriction so that a non admin can connect to wifi without the mac's admin password. -
Trying to connect my new tablet
Just received my new tablet and trying to connect to the wifi via my BT hub3 alongside. Been through the settings process and chosen my hub 3 on the listing. Each time it tries to connect it keeps coming up with "Authentication problem" and will not connect. Just say's Saved, Secured with WPA/WPA2. Have i missed something like entering my my Hub3 wireless key or PIN but i do not know how to get back to the screen in which to enter such information.
As you will have guessed I am new to this tablet lark.
Thanks for your help in advance.
Solved!
Go to Solution.See this guide for seting up tablets on the homehub.
http://bt.custhelp.com/app/answers/detail/a_id/9692
You should also turn off "smart set up" on the homehub as this can cause problems.
https://www.google.co.uk/search?sourceid=navclient&aq=&oq=turn+off+smart+set+uoup+homehub+5&hl=en-GB...
Maybe you are looking for
-
Swipe to next article in horizontal scroll. frame
Hi, If the reader reaches the end of an horizontal scrollable frame, the swipe to the next article does not work (neither does two finger swipe work). Instead, swiping to the next page on the end of an vertical scroll. frame works fine (v29 viewer).
-
Interactive Forms in Web dynpro for ABAP
Hello All, I created an application to accept some values from Interactive pdf form and pass to xml string in WDR. But none of the values are getting in there. This is what I am doing. DATA: lr_fp TYPE REF TO if_fp, lr_pdf_object
-
Dought regarding Function module
Hi , I have small dought regarding fm.... since Read_text is a function module can it be changed to RFC , since i need to retrive data from sap to informatica . since some of the long text are also need to retrived to a non sap system . if i c
-
I am try to create a able that will have 4 columns in all but the the layout will be flexible. That is the text might span 3 columns and an image might be in the remaining 1 column. Or the timage will span 2 columns and the text in the remaining 2 co
-
I upgrad Office Pro 2007 to Office Standard 2010
I upgraded my Office Pro 2007 to Office Standard 2010 yesterday and everything went fine with the exception. On this one machine the user is having word crash while he is working on it, sometimes right away, sometimes it is good for five minutes, it