HT1349 My macbook pro will not print to wireless printer-it just printed fine the other day. Even reloaded the printer driver, etc, message is "there is a communication error" -in the printer queue it says it is printing then error message pops up

Macbook Pro unable to print to wireless printer-other PC prints fine and mac just printed a couple days ago just fine. Tried reboot of router-no change, tried reinstall printer driver, etc, no change. what do I do now?

As you can see here, that particular Canon printer is not supported by AirPrint:
http://support.apple.com/kb/HT4356
More importantly, these directions should help in trying to set up your printer.
http://support.apple.com/kb/HT3500

Similar Messages

My MacBook Pro will not start up and it is just showing the grey screen?

My Apple Mac book pro is not starting up ,the screen is grey

If you are running Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion/Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My macbook pro will not connect automatically to wifi after restarting or asleep

My Macbook Pro will not automatically connect to wi fi after restarting or sleeping. Any ideas?

Few have this problem. But there is no single sure solution for this.
Until a solution is found, manually connecting to wifi after sleep is the way.
Best.

TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this.

MacBook Pro will not connect with Printer

My MacBook Pro will not connect to my HP Photosmart Printer, both are wireless. Receive a error message

What version of OS X? What router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?

I have recently switched from a PC to a MacBook Pro.
I have a large number of documents and photographs on a multiterrabite external drive, backed up on a second multiterrabite external drive.
Both external drives are formatted for MacIntosh. This has been verified by agents at an Apple store and also at Best Buy in two different cities.
This is the problem:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
Thanks!
Roderick Guerry
[email protected]

Roderick Guerry wrote:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
No, this is a philosophical difference between Apple and Microsoft. Apple believes that it's dangerous to cut a file in case the user never pastes it; in that case the file is lost. Microsoft seems to not have this problem (if I remember Windows correctly) because they don't delete the originating file if it's cut but never pasted.
Even though Macs have a lot of keyboard shortcuts, philosophically Macs have traditionally been mouse-first. This applies to file copy operations. In your case, what a Mac user would do is open the source window, open the destination window (on your second drive), and then Command-drag the selected files from the source to destination window. This is because a normal drag would leave the originals behind, while adding the Command modifier key tells OS X that this is a Move, not a Copy, so don't leave the originals behind.
(In addition there are different rules for drag-copying within the same volume or between different volumes. If you drag between two folders on the same volume, the files are moved. If you drag between different volumes, the files are copied unless you hold down Command to delete the copies on the source volume.)
Roderick Guerry wrote:
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
Two problems in this case. First, batch file renaming is not built into OS X unless you build something with Automator. However, there are many utilities that can do batch file renaming which you can find at macupdate.com or on the App Store. Since I work with media I often batch rename using one of the media managers I have lying around like Media Pro or Adobe Bridge (comes with Photoshop).
iPhoto is a database front end designed to shield the file system from the consumer and let them concentrate on creativity and sharing. As such it is often a poor choice for managing files directly. When you "transferred the photographs" chances are you moved the originals, not the ones iPhoto edited which are stored in a hidden folder.
Roderick Guerry wrote:
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
There will not be a way to do it exactly like Windows. As described above, there are ways to do it "the Mac way." If it is possible to remove judgment on which way is "better" you might find the Mac way to be acceptable, but of course sometimes we simply prefer what we're used to.

My Macbook Pro will not boot up. I can hear the sound that it has started and then goes into an infinite loop.

My Macbook Pro will not boot up. I can hear the sound that it has started and then it goes into an infinite loop.

What model MBP and which version of OS X? Sounds as if the hard drive may have failed. If you have an installation disc, try booting with it. If your machine came with Lion or Mountain Lion, try booting to the Recovery partition - Command and R keys held down while booting.
Clinton

My macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

my macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

Mac OS X: Gray screen appears during startup - Apple Support

I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating sys

I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating system. I do not have a back up of all my applications, my garageband music and other things. I also do not have time capsule set up on this machine, but I do have a 2 TB time capsule.
Is there anyway to back up this corrupted drive so I can restore my applications later?

There's an old saying. If you don't have a backup disc, then there must be nothing important to backup. That's just lesson #1. Lesson #2 is to never interrupt a software update. Not a good thing.
OK, I'm sure you know this. It just upsets me to read your story, knowing you have a lot of important stuff on your hard drive, and didn't use time machine.
You're pretty much in a bad place. My only hope for you is to boot to your Installation Disc, then using disk utility see if you can save the internal hard drive (by fixing what can be fixed). You might be able to see your user folder and some of your apps. I wouldn't even consider copying the library, because who knows what's been corrupted in there.
Good luck.

My MacBook Pro will not open documents via Adobe Reader. Says I need to aspen Reader in Browzer and accept terms and contitions first. Went through this 3 times and got through to "Finish", closed browser and then retried. No luck. What's going on?? Have

My MacBook Pro will not open documents via Adobe Reader. Says I need to aspen Reader in Browzer and accept terms and contitions first. Went through this 3 times and got through to "Finish", closed browser and then retried. No luck. What's going on?? Have no problem with same documents on iPhone and iPad

After you finished installing did you launch Adobe Reader from your /Applications folder and accept EULA(End User License Agreement)?
What is your Adobe Reader version?
What browser are you using and browser version?
Thank You.

My macbook pro will not let me change my background or screensaver. It only shows a pinwheel and then I have to force quit. HELP!

My macbook pro will not let me change my background or screensaver. It only shows a pinwheel and then I have to force quit it! HELP.

Sounds like one of your preference (.plist) files are corrupted.
See #12/#13 Step here
..Step by Step to fix your Mac
Deleting the System Preference or other .plist file

2012 MacBook pro will not power up sleep light on then off

Please help my mid 2012 MacBook pro will not turn on. When I press the power button the light on front comes on and the cd rom drive attempts to start then it shuts back off. I have tried holding down the power button and pressing the button combo to reset the controller. Thanks for any help.

You may have to take the MBP to the Apple store as soon as possible.
Best.

After updating from Lion 10.7.4 to 10.7.5, my MacBook Pro will not reboot. Why? What can I do about it?

After upating from Lion 10.7.4 to 10.7.5, my MacBook Pro will not reboot. Why? What can I do about it?

I ended up having to visit an Apple Store. They claimed that the update must have aggravated an already corrupted hard disk drive. The solution was to wipe my hard disk (fortunately I had recently backed up on Time Machine). The "Genius" also claimed this was the first time he had come across the problem. Although he was clearly able to diagnose it straightaway, and the next person he saw had exactly the same problem with his Mac, and I saw an awful lot of customers queuing up with their Macs and iMacs looking very suspiciously like they all had the same problem! So clearly Apple know what the problem is but as usual treat customers as if they're idiots in order to cover up the problem. But at least the problem is now solved (although having to take at trip out and wait in a queue at an Apple store, and then restoring from backups is a painstaking inconvenience I could well have done without). All I can suggest is that you might as well take it in. None of the "solutions" on the Forum are remotely on the ball, and all Apple "Geniuses" have clearly been told what the problem is and how to fix it. Good luck!

My MacBook Pro will not powerup (even when connected to power supply).

My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.

Hi PatB11902,
Thank you for visiting Apple Support Communities.
If your MacBook Pro does not seem to power on, but the caps lock key will light up when you press the caps lock key, you are likely seeing a video issue.
There are several steps that can help troubleshoot this behavior, found at this link:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Start with these steps:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Start up in Safe Mode.
If your Mac does not start up normally after these steps, here are some additional tips that can help:
Troubleshooting: My computer won't turn on - Apple Support
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Sincerely,
Jeremy

HT204384 I have a SanDisk Memory Stick PRO Duo and my MacBook Pro will not read it.

I have a San Disk Memory Stick PRO Duo 4GB and my MacBook Pro will not read it. I have also connected the card into a card reader and connected it to the USB port and nothing happens. This is really frustrating. Why wont my computer read my card?

Are both , the printer and the mac in the same network?
You can find the right software and instructions here:
http://welcome.solutions.brother.com/BSC/public/eu/eu_ot/en/model_top/colormfc/m fcj870dw_us_eu_as.html?reg=eu&c=eu_ot&lang=en&prod=mfcj870dw_us_eu_as

HT1349 My macbook pro will not print to wireless printer-it just printed fine the other day. Even reloaded the printer driver, etc, message is "there is a communication error" -in the printer queue it says it is printing then error message pops up

Similar Messages

Maybe you are looking for