HT1386 i updated itunes 11.1 yesterday and now im trying to get my music on itunes to sync onto my iphone 4s but when i connect it through usb...Itunes is saying " waiting for changes to be applied"?
i updated itunes 11.1 yesterday and now im trying to get my music on itunes to sync onto my iphone 4s but when i connect it through usb...Itunes is saying " waiting for changes to be applied"? so i dont know what to do cause i just want to sync my music from itunes to my iphone 4s
I had the same problem and the fix was so easy that I felt a little silly after spending 2 hours with an Apple Technician. At the end of it all, what I had to do was make sure ALL music was deleted from my iPhone 5 by going into usage and clearing out the music folder. All I had to do then was turn my phone off and turn it back on again. I had not done this after my phone upgraded to the new 7.0 IOS. What's the first thing you do when experiencing computer problems? Reboot! It fixed my problem and now my iPhone 5 synchs perfectly when I had it connected to my computer. I am also on iTunes version 11.1.
Similar Messages
-
it says "waiting for changes to be applied? its been like that for 3 days and if it does sync all my music are grey and wont play on my ipod? any suggestions? im really getting frustrated ! -__-
Try:
"Waiting for changes to be applied": Apple Support Communities -
Since I updated to latest software on ipad cannot sync. with computer. Makes it to step 7 however says 'waiting for changes to be applied' and never completes sync.
thx for the help,
TonyHello Marcia,
Sorry you are having trouble syncing content with your iPhone 5. I found an article that might help with this syncing issue:
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
Also, you can delete the songs from the iPhone without syncing by just swiping from left to right over the song to get a delete button.
I hope this helps!
Best,
Sheila M. -
I can't sync my iPod with iTunes, iTunes says waiting for changes to be applied.
Hi, I've been experiencing problems with my iPod touch 5g, the problem is that when I updated it to iOS 7 some of my songs were deleted, so I went to iTunes and unsync it, but now I can't add the music again, iTunes says waiting for changes to be applied.
I've tried everything restarting the iPod, restating my mac, restore the iPod to the factory settings, everything and none of them worked
Please help me.Try:
"Waiting for changes to be applied": Apple Support Communities -
I previously had an iphone 4, and after backing up everything, i bought an iphone 5 and transfered everything to the new phone when i was at the apple store. i brought my laptop to get help syncing the music, but it gets stuck in a perpetual loading screen and gets stuck on waiting for changes to be applied. i cannot cancel the sync unless i eject my phone. and when i do, all of the music is greyed out, when i plug my phone in again, it starts syncing and stops when it says waiting for changes to be applied, or sometimes copying files. ive restarted my computer, my phone, un-plugged and plugged back in, everything is up to date, i un-installed and then re-installed itunes and nothing seems to work. i could sync everything fine before when i had the ophone 4. i have an HP laptop with windows 8 and i core 7, and theres a label that says nvidia geforce gt 635 (hopefully the info helps)
Can anybody please help me with this?so i went back to the apple store and the only solution was to trade in your phone for a new one because there was a faulty conector in the microport. hopefully you have a waranty and your stuff backed up!
-
My Sync never finishes it says "waiting for changes to be applied"
When trying to sync, it never finishes. It says "waiting for changes to be applied" and sits there forever.
Hi, haroldfm2013.
Thank you for visiting Apple Support Communities.
Normally this message indicates system information changes being applied on the iOS device. However, this could be related to security software conflicts. I would recommend going through the troubleshooting steps in the article below.
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/ts3125
Cheers,
Jason H. -
hi, i just got an iphone 5 today and whenever i try to sync it on my computer itunes says it is waiting for changes to be applied, what does that mean??
Hopefully is just says that for a minute or two ...
It just means that iTunes calculates what needs to be done, and then while instructing the iPhone to do these operations, it is "Waiting for changes to be applied." -
What does it mean when it says waiting for changes to be applied
i have just got my sisters old iphone and reset it to factory settings, when trying to sync my itunes to the phone in the play bar at the top a message appears reading 'waiting for changed to be applied' i dont know what changes it means but would be grateful if anyone could help
See this previous solved discussion:
waiting for changes to be applied -
I am trying to get the music content in iTunes on my Mac onto my iPhone. When I connect the devices, the computer does not seen to recognize the iPhone. i.e., on the open iTunes window, the iPhone is not seen as a connected "device".
Hi,
See Here
iPhone, iPad, or iPod touch not appearing in iTunes
From Here
http://www.apple.com/support/itunes/devices/
Also...
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538 -
has anyone else had the problem with getting your iphone to sync? i can't get any of my newly downloaded music to sync to my phone from my itunes and i tried to delete all my music and it won't even sync to do that. i dont know what to do.
try a new/fresh apple brand cable and make sure it is the only usb cable in use. this worked for me, i noticed i had no problem with a lighting cable. i did a restore from scratch and from backup and it did not help me...and if you cant sync than you wont be able to get anything but apps back after the restore
-
HT4528 my iphone will not sync with itunes it says waiting for changes to be applied
help me! i just got my iphone today! i tried restoring it and it didnt work!
Hi, haroldfm2013.
Thank you for visiting Apple Support Communities.
Normally this message indicates system information changes being applied on the iOS device. However, this could be related to security software conflicts. I would recommend going through the troubleshooting steps in the article below.
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/ts3125
Cheers,
Jason H. -
I have downloaded some music from the iTunes store and that has gone over onto my phone but the albums from CD's that I own are not going onto my phone as it will not sync.
Your help is very much appreciatedWhat is your selection under the Music tab for your iPhone sync preferences with iTunes - all music or selected playlists, artists, genres?
If the later, did you place the music imported from a CD in a playlist that is selected to be transferred to your iPhone?
Do you have sync checked songs selected under the Summary tab for your iPhone sync preferences with iTunes and if so, is all music in your iTunes library checked? -
So I updated my Ipod touch to the newest software on my pc laptop which is windows 7. The software update wiped all of my songs and apps off of my Ipod. This is not that big of a deal because the songs and apps are still in my library and apps folder in itunes on my computer. The problem is, when I go to sync all my songs and apps back onto my ipod the tracks and apps are not syncing. It's almost as if the computer thinks all the songs are still already on the ipod but they are not. What do I do here?
- Try resetting the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next, restore from backup. -
When connecting my iphone to the computer, all goes well with the sync until the last step. Step 6. It says "waiting for changes to be applied" and won't complete the sync!! anyone know how to rectify.
I'm having the exact same problem. Using iTunes 1.1.5, iPhone 5 which is updated.
Computer is running OS X version 10.9.2 -
Iphone 4s not syncing to iTunes *waiting for changes to be applied*
I have a brand new iphone 4s that wouldnt sync with my pc desktop and i recently got a new mbp and the same thing is happening an error keeps popping up in Itunes after the 2nd step of syncing and it says waiting for changes to be applied. Its really frustrating i restored my phone and it did nothing for the syncing just deleted all my apps...and ive researched these problem before and its obvioius a big occurance with other users and apple has done nothing?!?! wth !! and i have no voice memos on my phone so there is nothing to delete for those that have solved their issue that way....So if someone has a solution to help me sync my iphone 4s to my mbp i would greatly appreciate since obviously apple does not care to fix this issue!!!! terrible..
also tried to wifi sync and nothing ...
Maybe you are looking for
-
App-V 5 SP2 (RDS) application integration with multiple office versions - general question
So I have been testing Office 2013 with app-V 5 SP2 and the package size is a hefty 1+GB with Visio and Project thrown in and I am not convinced by the speed and efficiency of delivering office 2013 this way (shared content mode) so I am thinking of
-
Calling stored procedure with output parameters in a different schema
I have a simple stored procedure with two parameters: PROCEDURE Test1( pOutRecords OUT tCursorRef, pIdNumber IN NUMBER); where tCursorRef is REF CURSOR. (This procedure is part of a package with REF CURSOR declared in there) And I have two database s
-
Send IDOC from XI to an Third Party Non-SAP System
Hello Everyone , Is it possible to use XI IDOC adapter to send an IDOC to a Third-party non SAP system . This third-party-system handles IDOCs . We want to do SAP -> idoc -> XI -> idoc -> Third Party . Any response is appreciated . Thanks.
-
T030 - Planning Order - association to Cost element
Hi everybody I'd like to ask which association in T030 does the system when calculating Planned costs for production orders. I've 2 valorization classes for materials: 1 for stock materials and 1 for direct procurement on order. I would like to asso
-
Report painter : 8A26. how it works?
Hi All, Does anybody give me an idea of how report group 8A26 works in technical language? Which programs are attached to that? if I want to add custom fields in selection criteria, what I need to do? if I want to copy this report group to z program