HT1766 cannot start a session

when syncing I get a message that says cannot complete backup. cannot start a session with the iphone

Its all working now! Clean install No migration. That was the ticket for me. All anomalies are Gone!!

Similar Messages

Why can't I back up ,y iPhone 5. In iTunes it tell me it cannot start a session to back-up!

When I sync the iPhone 5, I get an error mess saying "cannot start a session" when it trys to bask it up. THe sync goes well excpt for backing it up, what is causing this as I need to back-up my phone?

How long are you leaving it to backup and how fast is your internet connection?
Backing up 3GB of data to a remote server can take many, many hours, especially if your internet up-speed is slow.

I can't back up my iPod because iTunes says "cannot start a session"

I plugged my 2nd Gen iPod into my Mac Mini in order to retrieve an app that I deleted from the iPod before realising that the updated version won't run on my iPod any more. The iPod showed up in iTunes, and when I cliecked Sync everything seemed to be going as it should - it seems to go through deleting the stuff from my iPod. backing it up, syncing, etc, but at the end of all that it said it couldn't back up anything because it "cannot establish a session withthe iPod". It works fine with my MacBook Pro, but the old version of the app I need got replaced by the updated version I can't use, so I do need to back up from the Mac Mini. What is all this about "can't establish a session" and how do I fix it?

Try:'
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities
also Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

HT1386 computer says it cannot start sync session when I plug in my ipad

I am trying to back up my ipad so I can restore it. It keeps freezing and quitting on me. I went to sync it and the computer keeps coming up with the message that it cannot sync because the sync session did not start. help!!!!

You might have an app that is corrupt or that's causing problems. Try cloaking all of your apps, reboot the iPad again, get a fresh start and see if the freezes and crashes let up.
Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it. Closes all of your apps like this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

[SOLVED] Cannot start X session from login

I don't know what exactly is going on. I'm using the nvidia package from the repo and kernel 2.6.32.6-1. I'm having trouble starting a second X session using:
startx -- :1
but this works fine
su -
startx -- :1
This is my xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Tue Dec 8 21:07:34 PST 2009
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "0"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "glx"
Load "extmod"
Load "dri"
Disable "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "ViewSonic VA1930wm-3"
DisplaySize 370 300
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200 A-LE"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
And the xorg error when I'm not root
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux nonsense 2.6.32-ARCH #1 SMP PREEMPT Mon Jan 25 20:06:48 UTC 2010 i686
Kernel command line: root=/dev/mapper/group-root vga=773 resume=/dev/mapper/group-swap ro
Build Date: 26 December 2009 11:37:45AM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sat Jan 30 21:42:17 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 8
(--) PCI:*(0:1:0:0) 10de:0222:3842:a295 nVidia Corporation NV44 [GeForce 6200 A-LE] rev 161, Mem @ 0xbf000000/16777216, 0xe0000000/268435456, 0xbe000000/16777216, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded even though the default is to disable it.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.53 Tue Dec 8 20:47:42 PST 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
dlopen: /usr/lib/xorg/modules/drivers/nvidia_drv.so: undefined symbol: dixLookupResource
(EE) Failed to load /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) UnloadModule: "nvidia"
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.1.log" for additional information.
Last edited by silentcontender (2010-02-02 01:13:54)

You are right about the first X session starting normally. I'm using the same user for both session and nvidia loads fine the first time. The log for the first X session:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux nonsense 2.6.32-ARCH #1 SMP PREEMPT Mon Jan 25 20:06:48 UTC 2010 i686
Kernel command line: root=/dev/mapper/group-root vga=795 resume=/dev/mapper/group-swap ro
Build Date: 26 December 2009 11:37:45AM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 31 22:11:14 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0222:3842:a295 nVidia Corporation NV44 [GeForce 6200 A-LE] rev 161, Mem @ 0xbf000000/16777216, 0xe0000000/268435456, 0xbe000000/16777216, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.53 Tue Dec 8 20:47:42 PST 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 190.53 Tue Dec 8 19:16:02 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Jan 31 22:11:15 NVIDIA(0): Enabling RENDER acceleration
(II) Jan 31 22:11:15 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Jan 31 22:11:15 NVIDIA(0): enabled.
(II) Jan 31 22:11:15 NVIDIA(0): NVIDIA GPU GeForce 6200 A-LE (NV44) at PCI:1:0:0 (GPU-0)
(--) Jan 31 22:11:15 NVIDIA(0): Memory: 262144 kBytes
(--) Jan 31 22:11:15 NVIDIA(0): VideoBIOS: 05.44.a2.10.01
(II) Jan 31 22:11:15 NVIDIA(0): Detected AGP rate: 8X
(--) Jan 31 22:11:15 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Jan 31 22:11:15 NVIDIA(0): Connected display device(s) on GeForce 6200 A-LE at
(--) Jan 31 22:11:15 NVIDIA(0): PCI:1:0:0:
(--) Jan 31 22:11:15 NVIDIA(0): ViewSonic VA1930wm-3 (CRT-0)
(--) Jan 31 22:11:15 NVIDIA(0): ViewSonic VA1930wm-3 (CRT-0): 400.0 MHz maximum pixel clock
(II) Jan 31 22:11:15 NVIDIA(0): Assigned Display Device: CRT-0
(==) Jan 31 22:11:15 NVIDIA(0):
(==) Jan 31 22:11:15 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Jan 31 22:11:15 NVIDIA(0): will be used as the requested mode.
(==) Jan 31 22:11:15 NVIDIA(0):
(II) Jan 31 22:11:15 NVIDIA(0): Validated modes:
(II) Jan 31 22:11:15 NVIDIA(0): "nvidia-auto-select"
(II) Jan 31 22:11:15 NVIDIA(0): Virtual screen size determined to be 1440 x 900
(--) Jan 31 22:11:15 NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
(--) Jan 31 22:11:15 NVIDIA(0): option
(==) Jan 31 22:11:15 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Jan 31 22:11:15 NVIDIA(0): Initialized AGP GART.
(II) Jan 31 22:11:15 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Jan 31 22:11:15 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Jan 31 22:11:15 NVIDIA(0): configuration option may not be set correctly. When the
(II) Jan 31 22:11:15 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Jan 31 22:11:15 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Jan 31 22:11:15 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Jan 31 22:11:15 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Jan 31 22:11:15 NVIDIA(0): Config Options in the README.
(II) Jan 31 22:11:15 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) Jan 31 22:11:15 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Jan 31 22:11:15 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event5"
(II) Logitech USB Receiver: Found 12 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found relative axes
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found absolute axes
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(WW) Logitech USB Receiver: ignoring absolute axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Jan 31 22:14:10 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Jan 31 22:14:10 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Jan 31 22:14:10 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Jan 31 22:14:10 NVIDIA(0): configuration option may not be set correctly. When the
(II) Jan 31 22:14:10 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Jan 31 22:14:10 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Jan 31 22:14:10 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Jan 31 22:14:10 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Jan 31 22:14:10 NVIDIA(0): Config Options in the README.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech USB Receiver: Device reopened after 1 attempts.
(II) Logitech USB Receiver: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Jan 31 22:14:22 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Jan 31 22:14:22 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Jan 31 22:14:22 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Jan 31 22:14:22 NVIDIA(0): configuration option may not be set correctly. When the
(II) Jan 31 22:14:22 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Jan 31 22:14:22 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Jan 31 22:14:22 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Jan 31 22:14:22 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Jan 31 22:14:22 NVIDIA(0): Config Options in the README.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech USB Receiver: Device reopened after 1 attempts.
(II) Logitech USB Receiver: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Jan 31 22:16:23 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Jan 31 22:16:23 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Jan 31 22:16:23 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Jan 31 22:16:23 NVIDIA(0): configuration option may not be set correctly. When the
(II) Jan 31 22:16:23 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Jan 31 22:16:23 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Jan 31 22:16:23 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Jan 31 22:16:23 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Jan 31 22:16:23 NVIDIA(0): Config Options in the README.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech USB Receiver: Device reopened after 1 attempts.
(II) Logitech USB Receiver: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
I'll try without a xorg.conf and post later.

Every time I try to restore my phone from the back up, after the update didnt work, its saying it cannot do this because it cannot start a session

I tried updating my phone, and right towards the end it said it could not update for whatever reason. So I restored it and updated it, and now it's not letting me restore it from my backup, even though it keeps asking if I want to.

Well, the problem isn't the back up because I already have a backup saved that I can restore from, I honestly don't know how, but I do, and it has all my apps. The problem is restoring it. I keep getting the "There was a problem downloading the software for the iPod "King". A duplicate file name was specified. With my 3G iPod touch, I did not have it named as "King". I had it as another name. I don't know if that helps, but as I said before, Backup-wise I'm okay for now. Restore-wise I'm not.
NOTE: Reinstalling iTunes doesn't help.

ITunes Cannot start session

My daughters ipod touch is having an issue. It won't let us activate it. We have had it since last christmas and it is just now having this problem. It says that it has the current ios, but when you power it on it says to activate the ipod. Which it won't let us do wirelessly or hardwired to the itunes. Not sure what is going on, cannot back it up, or even restore from a backup. When I try it says itunes cannot start a session with the ipod: a session couldn't be started?

<body><p>It's probably because you were on the iOS 6 beta, which just expired. You'll need to get the final 6.0 release from the developer iOS portal <a href="https://developer.apple.com/devcenter/ios/index.action#downloads">here</a> and install it manually.</p></body>

Cannot start a global transaction. A LocalTransactionContainment is already

Getting 'javax.transaction.NotSupportedException: java.lang.IllegalStateException: Cannot start a global transaction. A LocalTransactionContainment is already active with work.' while running the following code using XA datasource.
Setup: WAS 5.0.2, TopLink 9.0.4.4, Oracle JDBC Driver (XA), Oralce9i database flatform, using external transaction controller.
Code:
SessionManager sm = SessionManager.getManager();
Server serverSession = (Server)sm.getSession("PersistenceUnitTest");
ClientSession clientSession = serverSession.acquireClientSession();
int key = 1003;
Customer customerPK = new Customer();
customerPK.setId(new Integer(key));
ReadObjectQuery query =
new ReadObjectQuery(customerPK.getClass());
query.setSelectionKey(clientSession.keyFromObject(customerPK));
Customer customer = null;
try {
customer = (Customer)clientSession.executeQuery(query);
} catch (Exception e) {
clientSession.release();
InitialContext ctx = new InitialContext();
UserTransaction userTxn = (UserTransaction) ctx.lookup("java:comp/UserTransaction");
try {
userTxn.begin();
userTxn.rollback();
} catch (Exception e) {
e.printStackTrace();
} finally {
clientSession.release();
Trace:
2005.03.14 01:04:57.452--ServerSession(863114877)--Thread[Servlet.Engine.Transports : 0,5,main]--client acquired
2005.03.14 01:04:57.462--ServerSession(863114877)--Thread[Servlet.Engine.Transports : 0,5,main]--Connection(1731483245)--SELECT PERSON_TYPE, ID, GENDER, VERSION, LAST_NAME, FIRST_NAME, MIDDLE_INITIAL, HOME_ADDRESS_ID, PREFERRED_CUSTOMER, DISCOUNT_RATE, CONTACT_NUMBER, WORK_ADDRESS_ID FROM USER04.PERSON WHERE ((ID = ?) AND (PERSON_TYPE = ?))
     bind => [1003, C]
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R javax.transaction.NotSupportedException: java.lang.IllegalStateException: Cannot start a global transaction. A LocalTransactionContainment is already active with work.
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at com.ibm.ejs.jts.jta.UserTransactionImpl.begin(UserTransactionImpl.java:173)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at com.ford.it.persistence.impl.toplink.unittest.GlobalTransactionTest.testXA(GlobalTransactionTest.java:808)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at java.lang.reflect.Method.invoke(Native Method)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at junit.framework.TestCase.runTest(TestCase.java:154)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at junit.framework.TestCase.runBare(TestCase.java:127)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.ServletTestCase.runCactusTest(ServletTestCase.java:295)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.ServletTestCase.runBare(ServletTestCase.java:263)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.AbstractWebTestCaller.doTest(AbstractWebTestCaller.java:156)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.AbstractWebTestController.handleRequest_aroundBody0(AbstractWebTestController.java:130)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.AbstractWebTestController.handleRequest_aroundBody1$advice(AbstractWebTestController.java:158)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.AbstractWebTestController.handleRequest(AbstractWebTestController.java)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doPost_aroundBody2(ServletTestRedirector.java:138)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doPost_aroundBody3$advice(ServletTestRedirector.java:158)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doPost(ServletTestRedirector.java)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doGet_aroundBody0(ServletTestRedirector.java:109)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doGet_aroundBody1$advice(ServletTestRedirector.java:158)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doGet(ServletTestRedirector.java)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
[3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:201)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:610)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:431)
[3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
[3/14/05 13:04:57:492 EST] 17d31642 LocalTransact E WLTC0018E: Cannot begin a LocalTransactionContainment. A LocalTransactionContainment is already active.
2005.03.14 01:04:57.512--ClientSession(1258968685)--Thread[Servlet.Engine.Transports : 0,5,main]--client released
If we perform a query on a thread and then subsequently start a UserTransaction, we get the above failure on the begin() method of the UserTransaction
Did anyone experience this before? Your inputs/comments are greatly appreciated.
Haiwei

James, thanks very much for your response.
I hope you did not mis-understand my previous posts in this thread.
In the example I provided, the database query was outside the UserTransaction. I could successfully perform rollback on an XA db connection after the query was executed. The rollback call cleans up the resources used in the local transaction that was created for the query; thus allows the UserTransaction to start following the query.
The local transaction was created for the query because autoCommit property was false for XA datasource connections. If I set autoCommit to true after getting the connection from XA datasource, the query will finish with the commit of the local transaction that's created for the query. The WAS code appears to work correctly.
If using non-XA datasource, the local transaction created for the query will be committed because the autoCommit is default to true for the non-XA connections.
While using TopLink, there seems to be two options for solving my problem (which was stated at the begining of this thread):
1) after the execution of a TopLink query, trap the connection.close() event and call the connection.rollback() before closing the connection to clean up the resources used in the local transaction; or
2) trap the getConnection() event, and call conneciton.setAutoCommit(true) on the connection if the query is not part of the TopLink transaction or UserTransaction.
I studied and experimented with the TopLink code. Option 1) is not do-able. After the execution of a TopLink qeury, TopLink's PreReleaseConnection event does not contain the connection that was used in the query. The connection was closed in the executeCall method of DatabaseAccessor.
The postConnect event seems to provide some possibility of implementing option 2). However, when TopLink executes a query (at least, the ReadObjectQuery that I used in my testing), after getting a connection from DatabaseLogin, the executeCall method in DatabaseAccessoor never triggers the postConnect event.
I posted a seperate note on the issue. Here is the link: postConnect event .
or use a non-JTA DataSource for the TopLink session read login.<We use WAS connection pooling. Did you mean using non-XA datasource for TopLik read?
your own TopLink ExternalConnectionPool subclass to workaround the issue<Could you elaborate the details? Or where can I find more information on the technique?
Your help would be greatly appreciated.
Haiwei
Haiwei

Cannot start EPMA Process Manager.

I cannot start EPMA Process Manager on Windows. Here is the error from the Event Log:
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> Hyperion.DataAccessLayerCore.DataAccessLayerException: Database connectivity could not be established. ---> Oracle.DataAccess.Client.OracleException ORA-1017: invalid username/password; logon denied at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Hyperion.DataAccessLayerCore.DALConnectionTester.TestConnection()
at Hyperion.DataAccessLayerCore.DALConnectionTester.TestConnection(Int32 maxRetries, Int64 timeout)
--- End of inner exception stack trace ---
at Hyperion.DataAccessLayerCore.DALConnectionTester.TestConnection(Int32 maxRetries, Int64 timeout)
at Hype...
I have reconfigured, retyping the correct user and password many times now. I can log into the database from the server using SQL Plus with no issues. If anyone has an idea of what could be wrong, I would really appreciate the help.
Thanks!

I had the DBA create me a new empty database user. I ran the config tool again using this user/pwd and selected first time configuration of database. This finished successfully, 213 objects were created in the database. When I try to start the dimension server, I am still getting the ORA-1017 error.

Microsoft office programs always launch at start of session

I cannot prevent that all microsft office programs ( Excel, word, ppt, outlook) start ( as well as other programs; activity monitor) when ever I start my session; how can I control that ( and have a quiet session start without my screen poll-ted by 12 wondows to close)
Tx

This could be caused and avoided by a number of options.
First, ensure your login items does not contain any of those apps. Check
 > System Preferences... Users & Groups | Login Items
If none of the apps are in there, the following are alternatives - i.e., any ONE of them should work:
A. When you shutdown, uncheck the 'reopen windows on login' box in the Logout window
OR
B. Before you shutdown, ensure you manually Quit (Command-Q) all open apps.
OR
C. After starting up the mac, log in with the 'shift' key held down. This should give you a clean log on (note that this is NOT the same as starting in SAFE mode, which is done by holding down the shift key at power on - something you don't want to do unless you're troubleshooting).
A related tip is that you can start any App without resuming its previous window/s (last saved state) by clicking on it in the Dock with the shift key held down.

HT1386 fail to start sync session

So I got a new Macbook and when I went to sync my I-Pod it deleted everything on my I-Pod and the only things I could restore were things on the cloud. I then resynced to my old computer (Dell) to get all the other stuff back on my I-Pod. When I did that I got my stuff back except for the the music I got from CDs. I was then able to successfully put the music, videos, etc. to my new computer. Months later I tried to resync to my old computer, for backup and to try and get my other music back on my I-Pod. However it did not work, I kepted getting a failed sync alert. I then restored my I-Pod and tried to sync, but I keep getting the failed to start sync session message, and nothing is working. When I look on my I-Pod all my pictures are there, and I can see the lists of music and videos I have but they are faint and I cannot tap them to work. I don't know what to do now.

See:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities

11g db cannot start

Hi,
OS: windows Server 2003
DB Version: 11.6.0
I had abort shut down of my machine.
and when my machine was started, i cannot start the Database back.
It throws this error.
ora-00603: oracle server session terminated by fatal error
process id: 3212
session id: 280 serial number:5
Any idea.
regards,

Dear friends
Firstly thanks a lot for your response.
Due to disconnection of internet i cudnt reply the posts
plz find the last lines in alert log
ALTER DATABASE RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROLFILE
Media Recovery Start
Fast Parallel Media Recovery enabled
WARNING! Recovering data file 1 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 2 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 3 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 4 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 5 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 6 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 7 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 8 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
parallel recovery started with 16 processes
ORA-279 signalled during: ALTER DATABASE RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROLFILE ...
ALTER DATABASE RECOVER CANCEL
ORA-1547 signalled during: ALTER DATABASE RECOVER CANCEL ...
ALTER DATABASE RECOVER CANCEL
ORA-1112 signalled during: ALTER DATABASE RECOVER CANCEL ...
Sun Apr 03 23:05:06 2011
alter database open
ORA-1589 signalled during: alter database open
Shutting down instance: further logons disabled
Stopping background process MMNL
Stopping background process MMON
Shutting down instance (immediate)
License high water mark = 17
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Sun Apr 03 23:05:16 2011
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Sun Apr 03 23:05:16 2011
Stopping background process VKTM:
Sun Apr 03 23:05:18 2011
Instance shutdown complete
regards,

MaxDB cannot start: Missing root pointer in memory mapping

Hello,
I cannot start (or change to any other state) my MaxDB. I have already tried to remove directory rtedump_dir as per SAP Note 1283278, but this did not help.
Any help will be greatly appreciated
Warm greetings
Jan
mibse2:se2adm 62> dbmcli -d SE2 -u superdba,xxxyyy show state
OK
Missing root pointer in memory mapping when restoring memory map from /sapdb/SE2/data/wrk/SE2/rtedump_dir
mibse2:se2adm 63> dbmcli -d SE2 -u superdba,xxxyyy db_enum
OK
SE2     /sapdb/SE2/db                           7.8.01.14       fast    offline
SE2     /sapdb/SE2/db                           7.8.01.14       quick   offline
SE2     /sapdb/SE2/db                           7.8.01.14       slow    offline
SE2     /sapdb/SE2/db                           7.8.01.14       test    offline
mibse2:se2adm 64> dbmcli -d SE2 -u superdba,xxxyyy inst_enum
OK
7.8.01.14    /sapdb/clients/SE2
7.8.01.14    /sapdb/SE2/db
mibse2:se2adm 65> sdbregview -l
Installation: Global    /sapdb/programs
Global Listener                7.8.01.14    valid    64 bit
Installation Compatibility     7.8.01.14    valid    64 bit
Installer                      7.8.01.14    valid
SAP Utilities Compatibility    7.8.01.14    valid    64 bit
Installation: CL_SE2    /sapdb/clients/SE2
Base             7.8.01.14     valid    64 bit
Fastload API     7.8.01.14     valid    64 bit
JDBC             7.6.06.07     valid
Messages         MSG 0.9004    valid
ODBC             7.8.01.14     valid    64 bit
SAP Utilities    7.8.01.14     valid    64 bit
SQLDBC           7.8.01.14     valid    64 bit
SQLDBC 76        7.6.06.10     valid    64 bit
SQLDBC 77        7.8.01.14     valid    64 bit
Installation: SE2    /sapdb/SE2/db
Base                7.8.01.14     valid    64 bit
DB Analyzer         7.8.01.14     valid    64 bit
Database Kernel     7.8.01.14     valid    64 bit
Fastload API        7.8.01.14     valid    64 bit
JDBC                7.6.06.07     valid
Loader              7.8.01.14     valid    64 bit
Messages            MSG 0.9004    valid
ODBC                7.8.01.14     valid    64 bit
Redist Python       7.8.01.14     valid    64 bit
SAP Utilities       7.8.01.14     valid    64 bit
SQLDBC              7.8.01.14     valid    64 bit
SQLDBC 76           7.6.06.10     valid    64 bit
SQLDBC 77           7.8.01.14     valid    64 bit
Server Utilities    7.8.01.14     valid    64 bit
mibse2:se2adm 66> xinstinfo SE2
IndepData           : /sapdb/data
IndepPrograms       : /sapdb/programs
InstallationPath    : /sapdb/SE2/db
Kernelversion       : KERNEL    7.8.01   BUILD 014-121-233-288
Rundirectory        : /sapdb/SE2/data/wrk/SE2
mibse2:se2adm 67>

Hi,
1. Please update with output of the following commands:
ps u2013efe | grep dbmsrv
ls u2013l /var/lib/sdb/dbm/ipc
ipcs -m | wc u2013l
sysctl -a | grep kernel.shmmni
dbmcli inst_enum
dbmcli db_enum u2013s
2. Please post the dbmsrv*.err located in /sapdb/data/wrk
3. Check first<!> that you have not active dbmrfc/dbmsrv processes,
Stop the x_server .
- kill all these processes manually, if they where not release after
Closing DBMGUI, dbmcli sessions, stoping the application server.
- try to check/remove the shared memory
/sapdb/MAXDB1/db/pgm/dbmshm CHECK /var/lib/sdb/dbm/ipc MAXDB1
/sapdb/MAXDB1/db/pgm/dbmshm DELETE /var/lib/sdb/dbm/ipc MAXDB1
- Check in /var/lib/sdb/dbm/ipc if you have files MAXDB1.dbm.shi and MAXDB1.dbm.shm
< rename both files to MAXDB1.dbm.shi.old and MAXDB1.dbm.shm.old>
- Try to connect to the database using dbmcli tool & post results.
Hope above steps are helpful.
Regards,
Deepak Kori

MaterialMaster_CreateIDOC Cannot start thread

I am using the Material_Master AOI template with data services I wanted to loop through the IDOC for each plant starting with our main plant then as we loop material would be pushed (extended) to the other plants. When I looped the second time I go the error below. It appears because the connection is already opened for the IDOC another cannot thread be created. Can I close the connection when each plant is pushed and then re-open for the next plant?
7036       7160       SYS-050703         9/20/2011 2:47:24 PM    |Session Job_P2CMM01_Res_Material_Master|Work flow WF_P2CMM01_Res_MaterialMaster_GenerateIDOC|Data flow DF_P2CMM01_Res_MaterialMaster_CreateIDOC
7036       7160       SYS-050703         9/20/2011 2:47:24 PM    Cannot start thread.

Tasks are meant to be run in the context of a JavaFX application, like in the example below:
import javafx.application.Application;
import javafx.concurrent.Task;
import javafx.scene.Scene;
import javafx.scene.layout.StackPane;
import javafx.scene.paint.Color;
import javafx.stage.Stage;
import java.io.IOException;
public class TaskApp extends Application {
public static void main(String[] args) { launch(args); }
@Override public void start(final Stage stage) throws IOException {
    //create task object
    Task<Integer> task = new Task<Integer>(){
      @Override
      protected Integer call() throws Exception{
        System.out.println("Background task started...");
        int iterations;
        for(iterations = 0; iterations < 10000; iterations++){
          if(isCancelled()){
            break;
          System.out.println("Iteration " + iterations);
          Thread.sleep(3000);
        return iterations;
    //start the background task
    Thread th = new Thread(task);
    th.setDaemon(true);
    System.out.println("Starting background task...");
    th.start();
    stage.setScene(new Scene(new StackPane(), 200, 100, Color.BLANCHEDALMOND));
    stage.show();
}Also your code was setting the task thread as a daemon thread. The Java Virtual Machine exits when the only threads running are all daemon threads. So once your main routine finished (which would be really quickly), the program would just exit without doing anything much. Note that, in your example, even if you made the Task thread a non-daemon thread, it still doesn't work (likely because the Task class has some reliance on the JavaFX system being initialized). For your simple background process you could skip Task and just use a Runnable or a Callable (which doesn't require JavaFX and hence would work in a non-daemon thread invoked from main), but I guess it's just an experiment.

"Device Cannot Start - Code 10" - Windows Vista Error, w/ 2nd Gen. Nano

I'm having trouble with my Nano and Windows Vista. The computer is recognizing the iPod just fine and seeing all of my songs, but nothing will play and the diamond bar does not move. I can't hear previews online either.
Under device manager, a yellow "!" shows up for the iPod, and it says "Device Cannot Start - Code 10" when I check. All of my drivers and updates are current as of today. So is iTunes. Any thoughts?
It worked before, but now it's not.

This is a reasonably common error on a PC when there is a problem with either a USB device, your USB cables or hardware, or the system drivers.
In a case where, as you say, the device works properly with other computers, the problem is more likely to be with the hardware or drivers on the computer you're trying to connect to.
See this site for some hints:
http://www.pchell.com/hardware/usbcode10.shtml
I found it via a web search; I don't have any connection to that site.
The good news is that your iPhone is probably fine.

HT1766 cannot start a session

Similar Messages

Maybe you are looking for